Merge tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "Samsung 2nd DT updates for v3.20" from Kukjin Kim:

- for all of Samsung SoCs
  : use generic power domain bindings
  : add 'dr_mode' property for hsotg/dwc2 devices

- exynos3250-rinato and exynos3250-monk
  : add regulator-haptic

- exynos5422-odroidxu3
  : reduce total RAM by 22 MiB because last 22 MiB
    for secure monitor cannot be accessed by kernel
  : add on-board INA231 sensors and LDO26 of PMIC
    for the sensors

* tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: reduce total RAM by 22 MiB for exynos5422-odroidxu3
  ARM: dts: add on-board INA231 sensors for exynos5422-odroidxu3
  ARM: dts: Add regulator-haptic node for exynos3250-monk
  ARM: dts: Add regulator-haptic node for exynos3250-rinato
  ARM: dts: add 'dr_mode' property to hsotg devices for exynos boards
  ARM: dts: convert to generic power domain bindings for exynos DT
Signed-off-by: Olof Johansson <olof@lixom.net>

cx92755.dtsi describes CX92755 on chip peripherals. cx92755_equinox.dts
describes the Equinox evaluation board for the CX92755 SoC.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v3.20-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "ARM: rockchip: second batch of dts updates for 3.20" from Heiko Stübner:

Basic display nodes for crtcs and hdmi encoder, timer node
for the broadcast timer going through the clocksource tree
and two new boards, the rk3288-based Firefly and the
PX2-based Rayeager board (the PX2 is identical to the rk3066
but made for industrial users).

* tag 'v3.20-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add dts for ChipSPARK Rayeager PX2 board
  ARM: dts: rockchip: add dts for Firefly Firefly-RK3288 boards
  dt-bindings: add vendor prefix and root compatible property for Rockchip boards
  ARM: dts: rockchip: Add rockchip timer node for rk3288
  ARM: dts: rockchip: add rk3288 hdmi nodes
  ARM: dts: rockchip: Add rk3288 vop and display-subsystem
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch adds a devicetree binding documentation for FSL's
Management Complex.

Management Complex is a hardware resource manager that manages
specialized hardware objects used in network-oriented packet
processing applications
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch adds a devicetree binding documentation for FSL's
LS2085A SoC and Simulator model.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch addss the device-tree documentation for Freescale's
NS16550 UART (also called DUART).

There is a specific errata fix required in FSL NS16550 UART
which ensures that an random interrupt storm is not observed when
a break is provided as an input to the UART.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Of the Digicolor SoCs series only CX92755 is currently supported.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Merge "at91: dt for 3.20 #2" from Nicolas Ferre:

Second DT batch for 3.20:
- correct some pin configuration for at91sam9x5ek
- add pioD on sama5d4 following a modification of pinctrl driver
- add more precise nand compatibility string for sama5d4
- audio modifications for wm8904 or ac97

* tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: sam9263: Add ac97 device node
  dt: atmel_ac97c: Add device tree documentation
  ARM: at91: at91sam9n12ek/dt: use dt ids for wm8904
  ARM: at91: sama5d3xek/dt: use dt ids for wm8904
  ARM: at91: sama5d4: dts: change the nand compatible string
  ARM: at91/dt: sama5d4: add pioD controller
  ARM: at91/dt: disable pull-up on vbus-gpio (PB16) to reduce power consumption
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt-for-3.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Merge "Allwinner device tree changes for 3.20" from Maxime Ripard:

A lot of changes to the device tree for the 3.20 merge window, mostly with:
  - More DT license convertions, only two DTS and two DTSI are still uncertain
    and have not been converted yet
  - Use the C-preprocessor includes in the device trees.
  - Add support for the A31s SoC and improve the A80 support
  - Add IR receiver, lradc, PS/2 support
  - Add cpufreq support for all SoCs but the A23 and A80.
  - And a lot of new boards

* tag 'sunxi-dt-for-3.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (64 commits)
  ARM: dts: sun5i: Enable axp209 support on A13-OLinuxIno
  ARM: sunxi: dts: Add A10/A20 PS2 pin muxing options
  ARM: sunxi: dts: Add PS2 nodes to dtsi for A10,A20
  ARM: dts: sun6i: Add resistive touchscreen controller node to dtsi
  ARM: dts: sun4i: Add Hyundau A7HD board
  ARM: dts: sun4i: Add Marsboard A10 board
  ARM: dts: sun9i: Enable mmc2 on A80 Optimus Board
  ARM: dts: sun9i: Add 8 bit mmc pinmux setting for mmc2
  ARM: dts: sun9i: Enable mmc0 on A80 Optimus Board
  ARM: dts: sun9i: Convert a80 optimus board dts to label referencing
  ARM: dts: sun9i: Add mmc controller nodes to the A80 dtsi
  ARM: dts: sun9i: Add mmc config clock nodes
  ARM: dts: sunxi: Add missing mdio label
  ARM: dts: sun5i: Add mk802_a10s board
  ARM: dts: sun4i: Add mk802ii board
  ARM: dts: sun4i: Add mk802 board
  ARM: dts: sun4i: Add dts file for Chuwi V7 CW0825 tablet
  ARM: dts: sun7i: Add dts file for Bananapro board
  ARM: sun6i: Enable ARM arch timers
  ARM: dts: sun6i: Convert hummingbird a31 dts to label references
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "Samsung DT updates for v3.20" from Kukjin Kim:

- exynos3250
  : add exynos_usbphy node and hsotg nodes
- exynos3250-rinato
  : enable usb
  : cleanup and use macro for gpio-keys
  : add fimd and Panel devices support
- exynos3250-monk
  : enable usb
  : cleanup and use macro for gpio-keys
- exynos5250-snow
  : add power and lid gpio-keys pinctrl
- exynos5420-peach-pit and exynos5800-peach-pi
  : configure regulators for suspend
  : set always on for USB webCam regulators
  : add lid GPIO key device
- exynos5422
  : add support new board Odroid XU3
- dt-bindings
  : add exynos-chipid

* tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: Configure regulators for suspend on exynos Peach boards
  ARM: dts: Set Peach boards USB WebCam regulators to always on
  ARM: dts: Add lid GPIO key device node for Peach boards
  ARM: dts: Add power and lid GPIO keys pinctrl for exynos5250-snow
  Documentation: dt-bindings: add exynos-chipid binding information
  ARM: dts: add Panel device support for exynos3250-rinato
  ARM: dts: add fimd device support for exynos3250-rinato
  ARM: dts: use macro in gpio keys for exynos3250 boards
  ARM: dts: remove unnecessary gpio-key nodes for exynos3250 boards
  ARM: dts: Enable USB node for exynos3250-monk
  ARM: dts: Enable USB node for exynos3250-rinato
  ARM: dts: Add hsotg node for exynos3250
  ARM: dts: Add exynos_usbphy node for exynos3250
  ARM: dts: Add dts file for Odroid XU3 board
Signed-off-by: Olof Johansson <olof@lixom.net>

The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config
options may be removed in the near future.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

This adds the device node for the ac97 controller.
Signed-off-by: Alexander Stein <alexanders83@web.de>
Acked-By Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This adds the bindings for AC97 controller device tree support.
Signed-off-by: Alexander Stein <alexanders83@web.de>
Acked-By Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Using the device tree ids for wm8904 codec.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Using the wm8904 device tree compatible string.
Signed-off-by: Alexander Morozov <linux@meltdown.ru>
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

As we introduce a new "atmel,sama5d4-nand" compatible string for sama5d4,
so we need to apply it for sama5d4 chip.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This add support for Rayeager PX2, Rockchip PX2 based development board
made by ChipSPARK.
Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
Tested-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This adds support for Firefly-RK3288, Rockchip RK3288 based development
boards made by Firefly.

There are 2 dts for 2 versions of the board. rk3288-firefly-beta.dts is
for the beta version, rk3288-firefly.dts is for the mass production version.
Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>

[removed gmac reference, due to the gmac node going through the net-tree]
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This adds vendor prefix and root compatible property for following boards

- Firefly, Firefly-RK3288 boards (both beta and mass production version)
- ChipSPARK, Rayeager PX2 board

PX2 SoC is fully compatible with RK3066.
Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The rk3288 board uses the architected timers and these ones are shutdown when
the cpu is powered down. There is a need of a broadcast timer in this case to
ensure proper wakeup when the cpus are in sleep mode and a timer expires.

Add the timer node for the broadcast timer.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The (non micro) A13-OLinuxIno has an axp203 pmic, enable support for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Signed-off-by: VishnuPatekar <vishnupatekar0510@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Signed-off-by: VishnuPatekar <vishnupatekar0510@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Now that we support the sun6i variant of the touchscreen controller,
add the device node to the dtsi so we can use it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Last 22 MiB is RAM is reserved by secure monitor code and cannot be
accessed from Linux kernel, so adjust total RAM size to 0x7EA00000
(2 GiB - 22 MiB). This fixes random 'imprecise kernel abort' kernel
failures.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

The odroid-xu3 has 4 INA231 current sensors on board which can be
accessed from the Linux via the hwmon interface.

There is one sensor for each of these power rails:

- A15 cluster: VDD_ARM
- A7 cluster: VDD_KFC
- GPU: VDD_G3D
- memory: VDD_MEM

In addition to adding the sensors, LDO26 from the PMIC needs to be
enabled because it's powering these sensor.

Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch adds regulator-haptic device node controlled by regulator.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch adds regulator-haptic device node controlled by regulator.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

All currently supported boards use hsotg/dwc2 controller in device
('peripheral') mode, so add property which sets correct operation mode.
This patch fixes support in recent changes in dwc2 driver, which added
support for dual-role devices.
Suggested-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch replaces all custom samsung,power-domain dt
properties with generic power domain bindings and updates
documentation Samsung's devices referring to old binding.
Suggested-by: Kevin Hilman <khilman@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
[javier.martinez@collabora.co.uk: tested on the Exynos5800 Peach Pi Chromebook]
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

Merge tag 'tegra-for-3.20-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

Merge "ARM: tegra: Device tree changes for v3.20" from Thierry Reding:

A couple of unit addresses fixes in device trees, addition of microphone
detection on Chromebook 13 and a vendor prefix update.

* tag 'tegra-for-3.20-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Update isl29028 compatible string to use isil vendor prefix
  ARM: tegra: Fix unit address for Cortex-A9 TWD timer
  ARM: dts: tegra20: fix GR3D, DSI unit and reg base addresses
  ARM: tegra: Enable the mic-detect gpio on Acer Chromebook 13
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-dt-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Merge "ARM: imx: device tree changes for 3.20" from Shawn Guo:

The i.MX device tree update for 3.20:
 - Update i.MX6 operating-points setting in device tree to match the
   latest i.MX6 data sheet
 - Add i.MX6SX sabreauto board support
 - Add imx6dl-udoo board support based off imx6q-udoo
 - Update sabrelite board to include I2C and HDMI support
 - Update the VPU compatible strings to also use cnm,coda<model>
 - Remove the ocram clock from the VPU node, as the clock is already
   provided inside the ocram node
 - Add system reset controller and syscon-reboot for VF610
 - Update VF610 device tree to use zero based naming for GPIO nodes,
   so that the number scheme matches hardware manual
 - A number of random device additions like watchdog for VF610, sahara
   for i.MX53, QSPI for imx6sx-sdb board, etc.

Note: the branch imx/soc was merged into imx/dt because the SNVS device
tree node needs to refer to the new clock ID added by the imx/soc patch.

* tag 'imx-dt-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (28 commits)
  ARM: dts: imx28-evk: remove duplicate property
  ARM: vf610: use zero based naming for GPIO nodes
  ARM: dts: imx6q: enable dma for ecspi5
  ARM: dts: vfxxx: Add SNVS node
  ARM: imx: clk-vf610: Add clock for SNVS
  ARM: imx: clk-vf610: Add clock for UART4 and UART5
  ARM: imx: drop CPUIDLE_FLAG_TIME_VALID from cpuidle-imx6sx
  ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo
  ARM: imx: support arm power off in cpuidle for i.mx6sx
  ARM: imx: remove unnecessary setting for DSM
  ARM: dts: imx6sx: add i.mx6sx sabreauto board support
  ARM: dts: imx6sx-sdb: Add QSPI support
  ARM: dts: imx6qdl: Remove OCRAM clock from VPU node
  ARM: imx: apf51dev: add gpio-backlight support
  ARM: imx: correct the hardware clock gate setting for shared nodes
  ARM: imx: pllv3: add shift for frequency multiplier
  ARM vf610: add compatibilty strings of supported Vybrid SoC's
  ARM: i.MX53: dts: add sahara module
  ARM: dts: imx6dl: correct cpufreq volt/freq table
  ARM: dts: imx6q: update cpufreq volt/freq table
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "ARM: mediatek: DT changes for v3.20 (round 2)" from Matthias Brugger:

This adds uart support for mt6592 SoC.

* tag 'v3.20-next-dts2' of https://github.com/mbgg/linux-mediatek:
  ARM: mediatek: dts: Add uart to mt6592
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "mvebu/dt #2" from Andrew Lunn:

Second set of dt patches for mvebu for v3.20.

* tag 'mvebu-dt-3.20-2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: make DTS comments reflect DEBUG_LL changes
  ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  ARM: Kirkwood: Added support for pogoplug e02 (pink/gray)
  ARM: mvebu: fix compatible strings of MBus on Armada 375 and Armada 38x
  dt: bindings: update mvebu-mbus DT binding with new compatible properties
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v3.20-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "ARM: rockchip: soc updates for 3.20" [sic!] from Heiko Stübner:

dts part of core suspend support and limiting of rk3288
sd-card clockspeed to 150mhz

* tag 'v3.20-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add suspend settings for rk3288-evb-rk808
  ARM: dts: rockchip: add RK3288 suspend support
  ARM: dts: rockchip: set dw_mmc max-freq 150Mhz
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "ARM: BCM5301X: DT changes for v3.20" from Hauke Mehrtens:

bcm5301x-dt-2015-01-20: ARM: BCM5301X: dts updates for 3.20

* tag 'bcm5301x-dt-2015-01-20' of https://github.com/hauke/linux:
  ARM: BCM5301X: Add DT for Buffalo WZR-900DHP
  ARM: BCM5301X: Add LEDs for Buffalo devices
  ARM: BCM5301X: Drop unused poll-interval from gpio-keys
  ARM: BCM5301X: Add DT for Luxul XWC-1000
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.20/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "omap device tree changes for v3.20, part 2" from Tony Lindgren:

More changes for omap dts files mostly to add support for
dm816x devices and clocks. Also adds a qspi device for
dra72x-evm.

* tag 'omap-for-v3.20/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra72-evm: Add qspi device
  ARM: dts: Add minimal support for dm8168-evm
  ARM: dts: Add basic clocks for dm816x
  ARM: dts: Add basic dm816x device tree configuration
Signed-off-by: Olof Johansson <olof@lixom.net>

The Hyundai A7HD is a 7" 16:9 A10 powered tablet featuring 1G RAM, 8G
nand, 1024x600 IPS screen, a mini hdmi port, mini usb receptacle and a
headphones port for details see: http://linux-sunxi.org/Hyundai_A7HD

Cc: Mark Janssen <maniac@maniac.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

PioD controller was not described in the device tree since we don't use
it. As pinctrl-at91 allows disabled gpio controllers in the device
tree, we can add it to complete the device description.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>