- 05 Sep, 2015 39 commits
-
-
Vladimir Zapolskiy authored
The change removes redundant sysfs binary file boundary checks, since this task is already done on caller side in fs/sysfs/file.c Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Sylvain Chouleur authored
If century field is supported by the RTC CMOS device, then we should use it and then do not consider years greater that 169 as an error. For information, the year field of the rtc_time structure contains the value to add to 1970 to obtain the current year. This was a hack to be able to support years for 1970 to 2069. This patch remains compatible with this implementation. Signed-off-by:
Sylvain Chouleur <sylvain.chouleur@intel.com> Signed-off-by:
-
Alexandre Belloni authored
Commit dca1a4b5 ("clk: at91: keep slow clk enabled to prevent system hang") added a workaround for the slow clock as it is not properly handled by its users. Get and use the slow clock as it is necessary for the at91rm9200 rtc. Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
kbuild test robot authored
drivers/rtc/rtc-gemini.c:151:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
viresh kumar authored
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there is no need to do that again from its callers. Drop it. gemini driver was using likely() for a failure case while the rtc driver is getting registered. That looks wrong and it should really be unlikely. But because we are killing all the unlikely() flags, lets kill that too. Signed-off-by:
Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by:
-
Alexandre Belloni authored
Sort included headers alphabetically. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com>
-
Alexandre Belloni authored
See help for clk_get_rate(): "obtain the current clock rate (in Hz) for a clock source. This is only valid once the clock source has been enabled." It currently returns the correct value but that may not stay that way. Signed-off-by:
-
Alexandre Belloni authored
Sort included headers alphabetically. Signed-off-by:
-
Alexandre Belloni authored
rtc->sclk necessarily points to a valid clocks at this point. Else the probe would have aborted. Signed-off-by:
-
Alexandre Belloni authored
In case of a probe error, it is possible to abort after issuing clk_prepare_enable(). Ensure the clock is disabled and unprepared in that case. Signed-off-by:
-
Leo Yan authored
The email address missed character ">", so add it. Signed-off-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
-
Javier Martinez Canillas authored
The I2C core always reports the MODALIAS uevent as "i2c:<client name" regardless if the driver was matched using the I2C id_table or the of_match_table. So technically there's no need for a driver to export the OF table since currently it's not used. In fact, the I2C device ID table is mandatory for I2C drivers since a i2c_device_id is passed to the driver's probe function even if the I2C core used the OF table to match the driver. And since the I2C core uses different tables, OF-only drivers needs to have duplicated data that has to be kept in sync and also the dev node compatible manufacturer prefix is stripped when reporting the MODALIAS. To avoid the above, the I2C core behavior may be changed in the future to not require an I2C device table for OF-only drivers and report the OF module alias. So, it's better to also export the OF table to prevent breaking module autoloading if that happens. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Adrian Huang authored
Commit d5a1c7e3 ("rtc-cmos: Add an alarm disable quirk") that added a special quirk is not needed because [PATCH 1/2] of this patchset makes the kernel more robust: rtc-cmos: Cancel alarm timer if alarm time is equal to now+1 seconds Signed-off-by:
Adrian Huang <ahuang12@lenovo.com> Tested-by:
Egbert Eich <eich@suse.de> Tested-by:
Diego Ercolani <diego.ercolani@gmail.com> Cc: Borislav Petkov <bp@suse.de> Signed-off-by:
-
Adrian Huang authored
Steps to reproduce the problem: 1) Enable RTC wake-up option in BIOS Setup 2) Issue one of these commands in the OS: "poweroff" or "shutdown -h now" 3) System will shut down and then reboot automatically Root-cause of the issue: 1) During the shutdown process, the hwclock utility is used to save the system clock to hardware clock (RTC). 2) The hwclock utility invokes ioctl() with RTC_UIE_ON. The kernel configures the RTC alarm for the periodic interrupt (every 1 second). 3) The hwclock uitlity closes the /dev/rtc0 device, and the kernel disables the RTC alarm irq (AIE bit of Register B) via ioctl() with RTC_UIE_OFF. But, the configured alarm time is the current_time + 1. 4) After the next 1 second is elapsed, the AF (alarm interrupt flag) of Register C is set. 5) The S5 handler in BIOS is invoked to configure alarm registers (enable AIE bit and configure alarm date/time). But, BIOS does not clear the previous interrupt status during alarm configuration. Therefore, "AF=AIE=1" causes the rtc device to trigger an interrupt. 6) So, the machine reboots automatically right after shutdown. This patch cancels the alarm timer if the following condictions are met (suggested by Alexandre): 1) The configured alarm time is equal to current_time + 1 seconds. 2) The AIE timer is not in use. The member 'alarm_expires' is introduced in struct cmos_rtc because of the following reasons: 1) The configured alarm time can be retrieved from cmos_read_alarm(), but we need to take the 'wrapped timestamp' and 'time rollover' into consideration. The function __rtc_read_alarm() eliminates the concerns. To avoid the duplicated code in the lower level RTC driver, invoking __rtc_read_alarm from the lower level RTC driver is not encouraged. Moreover, the compilation error 'the undefined __rtc_read_alarm" is observed if the lower level RTC driver is compiled as a kernel module. 2) The uie_rtctimer.node.expires and aie_timer.node.expires can be retrieved for the configured alarm time. But, the problem is that either of them might configure the CMOS alarm time. We cannot make sure UIE timer or AIE tiemr configured the CMOS alarm time before. (uie_rtctimer or aie_timer is enabled and then is disabled). 3) The patch introduces the member 'alarm_expires' to keep the newly configured alarm time, so the above-mentioned concerns can be eliminated. The issue goes away after 20-time shutdown tests. Signed-off-by:
-
S Twiss authored
Add DA9062 RTC support into the existing DA9063 RTC driver component by using generic access tables for common register and bit mask definitions. The following change will add generic register and bit mask support to the DA9063 RTC. The changes are slightly complicated by requiring support for three register sets: DA9063-AD, DA9063-BB and DA9062-AA. The following alterations have been made to the DA9063 RTC: - Addition of a da9063_compatible_rtc_regmap structure to hold all generic registers and bitmasks for this type of RTC component. - A re-write of struct da9063 to use pointers for regmap and compatible registers/masks definitions - Addition of a of_device_id table for DA9063 and DA9062 defaults - Refactoring functions to use struct da9063_compatible_rtc accesses to generic registers/masks instead of using defines from registers.h - Re-work of da9063_rtc_probe() to use of_match_node() and dev_get_regmap() to provide initialisation of generic registers and masks and access to regmap Signed-off-by:
Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by:
-
Henry Chen authored
Implement the suspend/resume function in order to control rtc's irq_wake flag and handle as wakeup source. Signed-off-by:
Henry Chen <henryc.chen@mediatek.com> Acked-by:
Eddie Huang <eddie.huang@mediatek.com> Signed-off-by:
-
Dmitry Torokhov authored
Instead of creating wakealarm attribute manually, after the device has been registered, let's rely on facilities provided by the attribute groups to control which attributes are visible and which are not. This allows to create all needed attributes at once, at the same time that we register RTC class device. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Dmitry Torokhov authored
Instead of using older style DEVICE_ATTR for wakealarm attribute let's switch to using DEVICE_ATTR_RW that ensures consistent across the kernel permissions on the attribute. Signed-off-by:
-
Dmitry Torokhov authored
Users of rtc_does_wakealarm() return value treat it as boolean so let's change the signature accordingly. Signed-off-by:
-
Henri Roosen authored
Since commit e6229bec ("rtc: make rtc_update_irq callable with irqs enabled") rtc_update_irq() is callable with irqs enabled. Signed-off-by:
Henri Roosen <henriroosen@gmail.com> Signed-off-by:
-
Octavian Purdila authored
Since dab472eb ("i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned"), 0 is not a valid i2c client irq anymore, so change all driver's checks accordingly. The same issue occurs when the device is instantiated via device tree with no IRQ, or from the i2c sysfs interface, even before the patch above. Signed-off-by:
Octavian Purdila <octavian.purdila@intel.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Dmitry Torokhov authored
struct rtc embeds both struct dev and struct cdev. Unfortunately character device structure may outlive the parent rtc structure unless we set it up as parent of character device so that it will stay pinned until character device is freed. Signed-off-by:
-
Dmitry Torokhov authored
Technically the address of rtc->dev can never be NULL, so get_device() can never fail. Also caller of rtc_device_unregister() supposed to be the owner of the device and thus have a valid reference. Therefore call to get_device() is not needed here. Signed-off-by:
-
Dmitry Torokhov authored
Commit 59cca865 ("drivers/rtc/class.c: fix device_register() error handling") correctly noted that naked kfree() should not be used after failed device_register() call, however, while it added the needed put_device() it forgot to remove the original kfree() causing double-free. Cc: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by:
-
Guo Zeng authored
The current codes use CSR platform specific API exported by machine codes to read/write RTC registers. they are: sirfsoc_rtc_iobrg_readl() sirfsoc_rtc_iobrg_writel() commit b1999477 ("ARM: prima2: move to use REGMAP APIs for rtciobrg") moves to regmap support, now we can move to use regmap APIs in RTC driver. Signed-off-by:
Guo Zeng <guo.zeng@csr.com> Signed-off-by:
Barry Song <Baohua.Song@csr.com> Signed-off-by:
-
Vaibhav Jain authored
rtc-opal driver provides support for rtc alarms via timed-power-on(tpo). However some Power platforms like BML use a fake rtc clock and don't support tpo. Such platforms are indicated by the missing 'has-tpo' property in the device tree. Current implementation however enables callback for rtc_class_ops.read/set alarm irrespective of the tpo support from the platform. This results in a failed opal call when kernel tries to read an existing alarms via opal_get_tpo_time during rtc device registration. This patch fixes this issue by setting opal_rtc_ops.read/set_alarm callback pointers only when tpo is supported. Acked-by:
Michael Neuling <mikey@neuling.org> Acked-by:
Neelesh Gupta <neelegup@linux.vnet.ibm.com> Signed-off-by:
Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
-
Joachim Eastwood authored
Add driver for the RTC found on NXP LPC178x/18xx/408x/43xx devices. The RTC provides calendar and clock functionality together with alarm interrupt support. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
-
Joachim Eastwood authored
Document NXP LPC178x/18xx/408x/43xx bindings Signed-off-by:
-
Krzysztof Kozlowski authored
platform_driver does not need to set an owner because platform_driver_register() will set it. Signed-off-by: -
Krzysztof Kozlowski authored
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by:
-
Andrea Scian authored
The PCF2127 datasheet states that it's wrong to say that the date in unreliable if BLF (battery low flag) is set but instead, OSF (seconds register) should be used to check if oscillator, for any reason, stopped. Battery may be low (usually below 2V5 threshold) but the date may be anyway correct (typically date is unreliable when input voltage is below 1V2). Signed-off-by:
Andrea Scian <andrea.scian@dave.eu> Signed-off-by:
-
Andrea Scian authored
There's a wrong comment in some RTC drivers that say it's better to ignore rtc_valid_tm() when reading RTC timestamp. However this is wrong and is better to return to the userspace the error if timestamp is not valid. Signed-off-by:
-
Vaibhav Hiremath authored
Along with DT support, this patch also cleans up the unnecessary code around 'rtc_wakeup' initialization. Signed-off-by:
Chao Xie <chao.xie@marvell.com> Signed-off-by:
Vaibhav Hiremath <vaibhav.hiremath@linaro.org> Signed-off-by:
-
Maninder Singh authored
removing below static analysis error: (error) Possible null pointer dereference: client if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) ^^^^^^^ Error comes because client is dereferenced before NULL check. So probably NULL this check is not required. Signed-off-by:
Maninder Singh <maninder1.s@samsung.com> Signed-off-by:
-
Vaishali Thakkar authored
Use module_platform_driver for drivers whose init and exit functions only register and unregister, respectively. A simplified version of the Coccinelle semantic patch that performs this transformation is as follows: @A@ identifier f, x; @@ -static f(...) { return platform_driver_register(&x); } @b depends on a@ identifier e, a.x; @@ -static e(...) { platform_driver_unregister(&x); } @c depends on a && b@ identifier a.f; declarer name module_init; @@ -module_init(f); @d depends on a && b && c@ identifier b.e, a.x; declarer name module_exit; declarer name module_platform_driver; @@ -module_exit(e); +module_platform_driver(x); Signed-off-by:
Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by:
-
Nishanth Menon authored
With the recent pinctrl-single changes, SoCs such as Texas Instrument's OMAP processors can treat wake-up events from deeper idle states as interrupts. Let's add support for the optional second interrupt for wake-up using the generic wakeirq support added in commit 4990d4fe ("PM / Wakeirq: Add automated device wake IRQ handling") Finally, to pass the wake-up interrupt in the dts file, interrupts-extended property needs to be passed. This is similar in approach to commit 2a0b965c ("serial: omap: Add support for optional wake-up") + ee83bd3b ("serial: omap: Switch wake-up interrupt to generic wakeirq") Signed-off-by:
Nishanth Menon <nm@ti.com> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Nishanth Menon authored
It is always a good practice to keep the #includes sorted Signed-off-by:
-
Nishanth Menon authored
Since we are not doing anything fancy in remove function that requires us to sequence IRQ free operation, we might as well switch over to devm_ equivalent of managed IRQ allocation and remove the explicit free_irq since it'd be done automatically at remove. Signed-off-by:
-
Felipe Balbi authored
The driver currently emulates the concept of threaded IRQ using a workqueue, which it really does not need to. Instead, switch over to threaded_irq handlers which is meant precisely for the same purpose. Signed-off-by:
-
- 04 Sep, 2015 1 commit
-
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm updates from Dave Airlie: "This is the main pull request for the drm for 4.3. Nouveau is probably the biggest amount of changes in here, since it missed 4.2. Highlights below, along with the usual bunch of fixes. All stuff outside drm should have applicable acks. Highlights: - new drivers: freescale dcu kms driver - core: more atomic fixes disable some dri1 interfaces on kms drivers drop fb panic handling, this was just getting more broken, as more locking was required. new core fbdev Kconfig support - instead of each driver enable/disabling it struct_mutex cleanups - panel: more new panels cleanup Kconfig - i915: Skylake support enabled by default legacy modesetting using atomic infrastructure Skylake fixes GEN9 workarounds - amdgpu: Fiji support CGS support for amdgpu Initial GPU scheduler - off by default Lots of bug fixes and optimisations. - radeon: DP fixes misc fixes - amdkfd: Add Carrizo support for amdkfd using amdgpu. - nouveau: long pending cleanup to complete driver, fully bisectable which makes it larger, perfmon work more reclocking improvements maxwell displayport fixes - vmwgfx: new DX device support, supports OpenGL 3.3 screen targets support - mgag200: G200eW support G200e new revision support - msm: dragonboard 410c support, msm8x94 support, msm8x74v1 support yuv format support dma plane support mdp5 rotation initial hdcp - sti: atomic support - exynos: lots of cleanups atomic modesetting/pageflipping support render node support - tegra: tegra210 support (dc, dsi, dp/hdmi) dpms with atomic modesetting support - atmel: support for 3 more atmel SoCs new input formats, PRIME support. - dwhdmi: preparing to add audio support - rockchip: yuv plane support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1369 commits) drm/amdgpu: rename gmc_v8_0_init_compute_vmid drm/amdgpu: fix vce3 instance handling drm/amdgpu: remove ib test for the second VCE Ring drm/amdgpu: properly enable VM fault interrupts drm/amdgpu: fix warning in scheduler drm/amdgpu: fix buffer placement under memory pressure drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic drm/amdgpu: fix typo in dce11 watermark setup drm/amdgpu: fix typo in dce10 watermark setup drm/amdgpu: use top down allocation for non-CPU accessible vram drm/amdgpu: be explicit about cpu vram access for driver BOs (v2) drm/amdgpu: set MEC doorbell range for Fiji drm/amdgpu: implement burst NOP for SDMA drm/amdgpu: add insert_nop ring func and default implementation drm/amdgpu: add amdgpu_get_sdma_instance helper function drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES drm/amdgpu: add burst_nop flag for sdma drm/amdgpu: add count field for the SDMA NOP packet v2 drm/amdgpu: use PT for VM sync on unmap drm/amdgpu: make wait_event uninterruptible in push_job ...
-
