The use of `delay_usecs` in terminate_request() was replaced with the new
`delay` struct used by the SPI subsystem, however the unit was
set to SPI_DELAY_UNIT_NSECS instead of SPI_DELAY_UNIT_USECS. This fixes that.

Fixes: 7d3ca507 ("platform/chrome: cros_ec_spi: Use new structure for SPI transfer delays")
Signed-off-by: Benson Leung <bleung@chromium.org>

To be compliant with other sensors, set and get sensor sampling
frequency in Hz, not mHz.

Fixes: ae7b02ad ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Report the maximum amount of sample the EC can hold.
This is not tunable, but can be useful for application to find out the
maximum amount of time it can sleep when hwfifo_timeout is set to a
large number.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Expose EC minimal interrupt period through buffer/hwfifo_timeout:
- Maximal timeout is limited to 65s.
- When timeout for all sensors is set to 0, EC will not send events,
  even if the sensor sampling rate is greater than 0.

Rename frequency to sampling_frequency to match IIO ABI.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Since cros_ec_sensorhub is shutting down the FIFO when the device
suspends, no need to slow down the EC sampling period rate.

It was necesseary to do that before command CMD_FIFO_INT_ENABLE was
introduced, but now all supported chromebooks have it.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

When EC supports FIFO, each IIO device registers a callback, to put
samples in the buffer when they arrives from the FIFO.

When no FIFO, the user space app needs to call trigger_new, or better
register a high precision timer.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Some IIO devices may want to override the default (realtime) to another
clock source by default.

It can beneficial when timestamps coming from the hardware or underlying
drivers are already in that format.

It can always be overridden by attribute current_timestamp_clock.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

To prevent comment rot, move function description to
cros_ec_sensors_core.c.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Events are timestamped in EC time space, their timestamps need to be
converted in host time space.

The assumption is the time delta between when the interrupt is sent
by the EC and when it is receive by the host is a [small] constant.
This is not always true, even with hard-wired interrupt. To mitigate
worst offenders, add a median filter to weed out bigger than expected
delays.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

EC FIFO can send sensor events in batch. Spread them based on
previous (TSa) and currnet timestamp (TSb)

  EC FIFO                             iio events
+-----------+
| TSa       |
+-----------+             +---------------------------------------+
| event 1   |             | event 1 | TSb - (TSb - TSa)/n * (n-1) |
+-----------+             +---------------------------------------+
| event 2   |             | event 2 | TSb - (TSb - TSa)/n * (n-2) |
+-----------+             +---------------------------------------+
|  ...      |  ------>    |  ....   |                             |
+-----------+             +---------------------------------------+
| event n-1 |             | event 2 | TSb - (TSb - TSa)/n         |
+-----------+             +---------------------------------------+
| event n   |             | event 2 | TSb                         |
+-----------+             +---------------------------------------+
| TSb       |
+-----------+
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

cros_ec_sensorhub registers a listener and query motion sense FIFO,
spread to iio sensors registers.

To test, we can use libiio:
  iiod&
  iio_readdev -u ip:localhost -T 10000 -s 25 -b 16 cros-ec-gyro | od -x
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

To better manage resources, store the number of sensors reported by
the EC.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

When converting to i2c_new_scanned_device(), it was overlooked that a
conversion to i2c_new_client_device() was also needed. Fix it.

Fixes: c82ebf1b ("platform/chrome: chromeos_laptop: Convert to i2c_new_scanned_device")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

After registering the ports at probe, get the current port information
from EC and update the Type C connector class ports accordingly.
Co-developed-by: Jon Flatley <jflat@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Add a driver to implement the Type C connector class for Chrome OS
devices with ECs (Embedded Controllers).

The driver relies on firmware device specifications for various port
attributes. On ACPI platforms, this is specified using the logical
device with HID GOOG0014. On DT platforms, this is specified using the
DT node with compatible string "google,cros-ec-typec".

The driver reads the device FW node and uses the port attributes to
register the typec ports with the Type C connector class framework, but
doesn't do much else.

Subsequent patches will add more functionality to the driver, including
obtaining current port information (polarity, vconn role, current power
role etc.) after querying the EC.
Co-developed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Read the PD host even status from the EC and send that to the notifier
listeners, for more fine-grained event information.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>

Convert the ACPI driver into the equivalent platform driver, with the
same ACPI match table as before. This allows the device driver to access
the parent platform EC device and its cros_ec_device struct, which will
be required to communicate with the EC to pull PD Host event information
from it.

Also change the ACPI driver name to "cros-usbpd-notify-acpi" so that
there is no confusion between it and the "regular" platform driver on
platforms that have both CONFIG_ACPI and CONFIG_OF enabled.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>

Introduce a device driver data structure, cros_usbpd_notify_data, in
which we can store the notifier block object and pointers to the struct
cros_ec_device and struct device objects.

This will make it more convenient to access these pointers when
executing both platform and ACPI callbacks.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>

cros-usbpd-notify notifier was returning NOTIFY_BAD when no host event
was available in the MKBP message.
But MKBP messages are used to transmit other information, so return
NOTIFY_DONE instead, to allow other notifier to be called.

Fixes: ec2daf6e ("platform: chrome: Add cros-usbpd-notify driver")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Remove the CONFIG_ prefix from the select statement for MFD_CROS_EC.

Fixes: 2fa2b980 ("mfd / platform: cros_ec: Rename config to a better name")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>

This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). In this case the change is trivial and the only
reason to do it is because we want to make cros_ec_cmd_xfer() a private
function for the EC protocol and let people only use the
cros_ec_cmd_xfer_status() to return Linux standard error codes.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>

This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). It allows us to remove some redundand code. In this
case, though, we are changing a bit the behaviour because of returning
-EINVAL on protocol error we propagate the error return for
cros_ec_cmd_xfer_status() function, but I think it will be fine, even
more clear as we don't mask the Linux error code.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>

This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). In this case the change is trivial and the only
reason to do it is because we want to make cros_ec_cmd_xfer() a private
function for the EC protocol and let people only use the
cros_ec_cmd_xfer_status() to return Linux standard error codes.

Looking at the code I am even unsure that makes sense differentiate
these two errors but let's not change the behaviour for now.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>

This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). In this case the change is trivial and the only
reason to do it is because we want to make cros_ec_cmd_xfer() a private
function for the EC protocol and let people only use the
cros_ec_cmd_xfer_status() to return Linux standard error codes.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>

This patch makes use of cros_ec_cmd_xfer_status() instead of
cros_ec_cmd_xfer(). In this case the change is trivial and the only
reason to do it is because we want to make cros_ec_cmd_xfer() a private
function for the EC protocol and let people only use the
cros_ec_cmd_xfer_status() to return Linux standard error codes.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>

In practice most drivers that use the EC protocol what really care is if
the result was successful or not, hence, we introduced a
cros_ec_cmd_xfer_status() function that converts EC errors to standard
Linux error codes. On some few cases, though, we are interested on know
if the command is supported or not, and in such cases, just ignore the
error. To achieve this, return a -ENOTSUPP error when the command is not
supported.

This will allow us to finish the conversion of all users to use the
cros_ec_cmd_xfer_status() function instead of cros_ec_cmd_xfer() and
make the latest private to the protocol driver, so users of the protocol
are not confused in which function they should use.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Prashant Malani <pmalani@chromium.org>

In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.

The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).

[1] commit bebcfd27 ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Host event can be sent by remoteproc by any time, and
cros_ec_rpmsg_callback would be called after cros_ec_rpmsg_create_ept.
But the cros_ec_device is initialized after that, which cause host event
handler to use cros_ec_device that are not initialized properly yet.

Fix this by don't schedule host event handler before cros_ec_register
returns. Instead, remember that we have a pending host event, and
schedule host event handler after cros_ec_register.

Fixes: 71cddb70 ("platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed.")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

RO and RW of EC may have different EC protocol version. If EC transitions
between RO and RW, but AP does not reboot (this is true for fingerprint
microcontroller / cros_fp, but not true for main ec / cros_ec), the AP
still uses the protocol version queried before transition, which can
cause problems. In the case of fingerprint microcontroller, this causes
AP to send the wrong version of EC_CMD_GET_NEXT_EVENT to RO in the
interrupt handler, which in turn prevents RO to clear the interrupt
line to AP, in an infinite loop.

Once an EC_HOST_EVENT_INTERFACE_READY is received, we know that there
might have been a transition between RO and RW, so re-query the protocol.
Signed-off-by: Yicheng Li <yichengli@chromium.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Replace with appropriate types.h.

Also there is no need to include device.h, but mutex.h.
For the pointers to unknown structures use forward declarations.

In the *.c files we need to include all headers that provide APIs
being used in the module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Merge 0cbb4f9c ("platform/chrome: wilco_ec: Include asm/unaligned instead of
linux/ path") from chrome-platform-5.6-fixes into for-next destined branch.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

It seems that we shouldn't try to include the include/linux/ path to
unaligned functions. Just include asm/unaligned.h instead so that we
don't run into compilation warnings like below.

   In file included from drivers/platform/chrome/wilco_ec/properties.c:8:0:
   include/linux/unaligned/le_memmove.h:7:19: error: redefinition of 'get_unaligned_le16'
    static inline u16 get_unaligned_le16(const void *p)
                      ^~~~~~~~~~~~~~~~~~
   In file included from arch/ia64/include/asm/unaligned.h:5:0,
                    from arch/ia64/include/asm/io.h:23,
                    from arch/ia64/include/asm/smp.h:21,
                    from include/linux/smp.h:68,
                    from include/linux/percpu.h:7,
                    from include/linux/arch_topology.h:9,
                    from include/linux/topology.h:30,
                    from include/linux/gfp.h:9,
                    from include/linux/xarray.h:14,
                    from include/linux/radix-tree.h:18,
                    from include/linux/idr.h:15,
                    from include/linux/kernfs.h:13,
                    from include/linux/sysfs.h:16,
                    from include/linux/kobject.h:20,
                    from include/linux/device.h:16,
                    from include/linux/platform_data/wilco-ec.h:11,
                    from drivers/platform/chrome/wilco_ec/properties.c:6:
   include/linux/unaligned/le_struct.h:7:19: note: previous definition of 'get_unaligned_le16' was here
    static inline u16 get_unaligned_le16(const void *p)
                      ^~~~~~~~~~~~~~~~~~
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 60fb8a8e ("platform/chrome: wilco_ec: Allow wilco to be compiled in COMPILE_TEST")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

There's a bug on ACPI platforms where host events from the ECPD ACPI
device never make their way to the cros-ec-usbpd-charger driver. This
makes it so the only time the charger driver updates its state is when
user space accesses its sysfs attributes.

Now that these events have been unified into a single notifier chain on
both ACPI and non-ACPI platforms, update the charger driver to use this
new notifier.
Reviewed-by: Benson Leung <bleung@chromium.org>
Co-Developed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Jon Flatley <jflat@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>

ChromiumOS uses ACPI device with HID "GOOG0003" for power delivery
related events. The existing cros-usbpd-charger driver relies on these
events without ever actually receiving them on ACPI platforms. This is
because in the ChromeOS kernel trees, the GOOG0003 device is owned by an
ACPI driver that offers firmware updates to USB-C chargers.

Introduce a new platform driver under cros-ec, the ChromeOS embedded
controller, that handles these PD events and dispatches them
appropriately over a notifier chain to all drivers that use them.

On platforms that don't have the ACPI device defined, the driver gets
instantiated for ECs which support the EC_FEATURE_USB_PD feature bit,
and the notification events will get delivered using the MKBP event
handling mechanism.
Co-Developed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Jon Flatley <jflat@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-By: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>

Pull more Kbuild updates from Masahiro Yamada:

 - fix randconfig to generate a sane .config

 - rename hostprogs-y / always to hostprogs / always-y, which are more
   natual syntax.

 - optimize scripts/kallsyms

 - fix yes2modconfig and mod2yesconfig

 - make multiple directory targets ('make foo/ bar/') work

* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: make multiple directory targets work
  kconfig: Invalidate all symbols after changing to y or m.
  kallsyms: fix type of kallsyms_token_table[]
  scripts/kallsyms: change table to store (strcut sym_entry *)
  scripts/kallsyms: rename local variables in read_symbol()
  kbuild: rename hostprogs-y/always to hostprogs/always-y
  kbuild: fix the document to use extra-y for vmlinux.lds
  kconfig: fix broken dependency in randconfig-generated .config

Pull new zonefs file system from Damien Le Moal:
 "Zonefs is a very simple file system exposing each zone of a zoned
  block device as a file.

  Unlike a regular file system with native zoned block device support
  (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
  sequential write constraint of zoned block devices to the user. As a
  result, zonefs is not a POSIX compliant file system. Its goal is to
  simplify the implementation of zoned block devices support in
  applications by replacing raw block device file accesses with a richer
  file based API, avoiding relying on direct block device file ioctls
  which may be more obscure to developers.

  One example of this approach is the implementation of LSM
  (log-structured merge) tree structures (such as used in RocksDB and
  LevelDB) on zoned block devices by allowing SSTables to be stored in a
  zone file similarly to a regular file system rather than as a range of
  sectors of a zoned device. The introduction of the higher level
  construct "one file is one zone" can help reducing the amount of
  changes needed in the application while at the same time allowing the
  use of zoned block devices with various programming languages other
  than C.

  Zonefs IO management implementation uses the new iomap generic code.
  Zonefs has been successfully tested using a functional test suite
  (available with zonefs userland format tool on github) and a prototype
  implementation of LevelDB on top of zonefs"

* tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Add documentation
  fs: New zonefs file system

In order to allow the GICv4 code to link properly on 32bit ARM,
make sure we don't use 64bit divisions when it isn't strictly
necessary.

Fixes: 4e6437f1 ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>