- 10 Jun, 2013 15 commits
-
-
Ville Syrjälä authored
We want to disable the cursor by calling ->cursor_set() with handle=0 from places where we don't have a file_priv, so don't try to access it unless necessary. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Ville Syrjälä authored
Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-next-2013-06-01' of git://people.freedesktop.org/~danvet/drm-intel into drm-next Daniel writes: Another round of drm-intel-next for 3.11. Highlights: - Haswell IPS support (Paulo Zanoni) - VECS support on Haswell (Ben Widawsky, Xiang Haihao, ...) - Haswell watermark fixes (Paulo Zanoni) - "Make the gun bigger again" multithread fence fix from Chris. - i915_error_state finnally no longer fails with -ENOMEM! Big thanks to Mika for tackling this. - vlv sideband locking fixes from Jani - Hangcheck prep work for arb_robustness support (Mika&Chris) - edp vs cpu port confusion clean-up from Imre - pile of smaller fixes and cleanups all over. * tag 'drm-intel-next-2013-06-01' of git://people.freedesktop.org/~danvet/drm-intel: (70 commits) drm/i915: add i915_ips_status debugfs entry drm/i915: add enable_ips module option drm/i915: implement IPS feature drm/i915: fix up the edp power well check drm/i915: add I915_PARAM_HAS_VEBOX to i915_getparam drm/i915: add I915_EXEC_VEBOX to i915_gem_do_execbuffer() drm/i915: add VEBOX into debugfs drm/i915: Enable vebox interrupts drm/i915: vebox interrupt get/put drm/i915: consolidate interrupt naming scheme drm/i915: Convert irq_refounct to struct drm/i915: make PM interrupt writes non-destructive drm/i915: Add PM regs to pre/post install drm/i915: Create an ivybridge_irq_preinstall drm/i915: Create a more generic pm handler for hsw+ drm/i915: add support for 5/6 data buffer partitioning on Haswell drm/i915: properly set HSW WM_LP watermarks drm/i915: properly set HSW WM_PIPE registers drm/i915: fix pch_nop support drm/i915: Vebox ringbuffer init ...
-
Ville Syrjälä authored
Keeping the modes sorted by vrefresh before the pixel clock makes the mode list somehow more pleasing to the eye. Signed-off-by:
-
Ville Syrjälä authored
Keeping the modes in the same order as we probe them makes it a bit easier to track what's happening. Signed-off-by:
-
Ville Syrjälä authored
Preserve the destination mode's list head in drm_mode_copy. Just in case someone decides that it's a good idea to overwrite a mode which happens to be on some list, Signed-off-by:
-
Thomas Meyer authored
Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
-
Thomas Meyer authored
Signed-off-by:
-
Thomas Meyer authored
Signed-off-by:
-
git://linuxtv.org/pinchartl/fbdevDave Airlie authored
GEM CMA PRIME support from Laurent. * 'drm/next' of git://linuxtv.org/pinchartl/fbdev: drm: GEM CMA: Add DRM PRIME support drm: GEM CMA: Split object mapping into GEM mapping and CMA mapping drm: GEM CMA: Split object creation into object alloc and DMA memory alloc drm/omap: Use drm_gem_mmap_obj() to implement dma-buf mmap drm/gem: Split drm_gem_mmap() into object search and object mapping
-
Ville Syrjälä authored
The structures and strings involved with various pretty-print functions aren't meant to be modified, so make them all const. The exception is drm_connector_enum_list which does get modified in drm_connector_init(). While at it move the drm_get_connector_status_name() prototype from drmP.h to drm_crtc.h where it belongs. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Ville Syrjälä authored
Use drm_get_format_name to print more readable pixel format names in debug output. Also unify the debug messages to say "unsupported pixel format", which better describes what is going on. Signed-off-by:
-
Ville Syrjälä authored
Rather than just printing the pixel format as a hex number, decode the fourcc into human readable form, and also decode the LE vs. BE flag. Keep printing the raw hex number too in case it contains non-printable characters. Some examples what the new drm_get_format_name() produces: DRM_FORMAT_XRGB8888: "XR24 little-endian (0x34325258)" DRM_FORMAT_YUYV: "YUYV little-endian (0x56595559)" DRM_FORMAT_RGB565|DRM_FORMAT_BIG_ENDIAN: "RG16 big-endian (0xb6314752)" Unprintable characters: "D??? big-endian (0xff7f0244)" v2: Fix patch author Signed-off-by:
-
Maarten Lankhorst authored
This allows importing bo's to own device to work without requiring that the buffer is pinned in GART. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by:
-
Maarten Lankhorst authored
Prevents buffers from being pinned forever. Signed-off-by:
-
- 08 Jun, 2013 5 commits
-
-
Laurent Pinchart authored
Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Rob Clark <robdclark@gmail.com>
-
Laurent Pinchart authored
The CMA-specific mapping code will be used to implement dma-buf mmap support. Signed-off-by:
-
Laurent Pinchart authored
This allows creating a GEM CMA object without an associated DMA memory buffer, and will be used to implement DRM PRIME support. Signed-off-by:
-
Laurent Pinchart authored
The dma-buf mmap code was copied from the GEM mmap implementation. Replace it with the new drm_gem_mmap_obj() function. Signed-off-by:
-
Laurent Pinchart authored
The drm_gem_mmap() function first finds the GEM object to be mapped based on the fake mmap offset and then maps the object. Split the object mapping code into a standalone drm_gem_mmap_obj() function that can be used to implement dma-buf mmap() operations. Signed-off-by:
-
- 03 Jun, 2013 4 commits
-
-
Steffen Trumtrar authored
Signed-off-by:
Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by:
-
Steffen Trumtrar authored
Signed-off-by:
-
Steffen Trumtrar authored
Signed-off-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by:
-
Steffen Trumtrar authored
As the device_node pointer is not changed in of_get_display_timing and parse_timing_property it can be a const pointer. Signed-off-by:
-
- 31 May, 2013 16 commits
-
-
Paulo Zanoni authored
It just prints whether it's supported/enabled/disabled. Feature requested by the power management team. v2: Checkpatch started complaining about seq_printf with 1 argument. Requested-by:
Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by:
-
Paulo Zanoni authored
IPS is still enabled by default. Feature requested by the power management team. This should also help testing the feature on some early pre-production hardware where there were relationship problems between IPS and PSR. v2: Rebase on top of the newest IPS implementation. v3: Check i915_enable_ips at compute_config, not supports_ips, so the kernel parameter will be ignored at haswell_get_pipe_config. Requested-by: -
Paulo Zanoni authored
Intermediate Pixel Storage is a feature that should reduce the number of times the display engine wakes up memory to read pixels, so it should allow deeper PC states. IPS can only be enabled on ULT pipe A with 8:8:8 pipe pixel formats. With eDP 1920x1080 and correct watermarks but without FBC this moves my PC7 residency from 2.5% to around 38%. v2: - It's tied to pipe A, not port A - Add pipe_config support (Chris) - Add some assertions (Chris) - Rebase against latest dinq v3: - Don't ever set ips_enabled to false (Daniel) - Only check for ips_enabled at hsw_disable_ips (Daniel) v4: - Add hsw_compute_ips_config (Daniel) - Use the new dump_pipe_config (Daniel) Signed-off-by: -
Daniel Vetter authored
Now that we track the cpu transcoder we need accurately in the pipe config we can finally fix up the transcoder check. With the current code eDP on port D will be broken since we'd errornously cut the power. For reference see commit 2124b72e Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Mar 22 14:07:23 2013 -0300 drm/i915: don't disable the power well yet v2: - Kill the now outdated comment (Paulo) - Add the missing crtc->base.enabled check and consolidate it (Paulo) - Smash all checks together, looks neater that way. v3: Kill the unused encoder variable. Cc: Takashi Iwai <tiwai@suse.de> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Xiang, Haihao authored
This will let userland only try to use the new ring when the appropriate kernel is present Signed-off-by:
Xiang, Haihao <haihao.xiang@intel.com> Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
Xiang, Haihao authored
A user can run batchbuffer via VEBOX ring. Signed-off-by:
-
Xiang, Haihao authored
v2: Removed rebase relic VECS ring from i915_gem_request_info (Damien) v3: s/hsw/hws in debugfs which I introduced in v2 (Jon) Signed-off-by:
-
Ben Widawsky authored
Similar to a patch originally written by: v2: Reversed the meanings of masked and enabled (Haihao) Made non-destructive writes in case enable/disabler rps runs first (Haihao) v3: Reword error message (Damien) Modify postinstall to do the right thing based on previous fixup. (Ben) CC: Xiang, Haihao <haihao.xiang@intel.com> Reviewed-by:
-
Ben Widawsky authored
v2: Use the correct lock to protect PM interrupt regs, this was accidentally lost from earlier (Haihao) Fix return types (Ben) Reviewed-by:
-
Ben Widawsky authored
The motivation here is we're going to add some new interrupt definitions and handling outside of the GT interrupts which is all we've managed so far (with some RPS exceptions). By consolidating the names in the future we can make thing a bit cleaner as we don't need to define register names twice, and we can leverage pretty decent overlap in HW registers since ILK. To explain briefly what is in the comments: there are two sets of interrupt masking/enabling registers. At least so far, the definitions of the two sets overlap. The old code setup distinct names for interrupts in each set, ie. one for global, and one for ring. This made things confusing when using the wrong defines in the wrong places. rebase: Modified VLV bits v2: Renamed GT_RENDER_MASTER to GT_RENDER_CS_MASTER (Damien) Reviewed-by:
-
Ben Widawsky authored
It's overkill on older gens, but it's useful for newer gens. Reviewed-by:
-
Ben Widawsky authored
PM interrupts have an expanded role on HSW. It helps route the EBOX interrupts. This patch is necessary to make the existing code which touches the mask, and enable registers more friendly to other code paths that also will need these registers. To be more explicit: At preinstall all interrupts are masked and disabled. This implies that preinstall should always happen before any enabling/disabling of RPS or other interrupts. The PMIMR is touched by the workqueue, so enable/disable touch IER and IIR. Similarly, the code currently expects IMR has no use outside of the RPS related interrupts so they unconditionally set 0, or ~0. We could use IER in the workqueue, and IMR elsewhere, but since the workqueue use-case is more transient the existing usage makes sense. Disable RPS events: IER := IER & ~GEN6_PM_RPS_EVENTS // Disable RPS related interrupts IIR := GEN6_PM_RPS_EVENTS // Disable any outstanding interrupts Enable RPS events: IER := IER | GEN6_PM_RPS_EVENTS // Enable the RPS related interrupts IIR := GEN6_PM_RPS_EVENTS // Make sure there were no leftover events (really shouldn't happen) v2: Shouldn't destroy PMIIR or PMIMR VEBOX interrupt state in enable/disable rps functions (Haihao) v3: Bug found by Chris where we were clearing the wrong bits at rps disable. expanded commit message v4: v3 was based off the wrong branch v5: Added the setting of PMIMR because of previous patch update CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: -
Ben Widawsky authored
At the moment, these values are wiped out anyway by the rps enable/disable. That will be changed in the next patch though. v2: Add post install setup to address issue found by Damien in the next patch. replaced WARN_ON(dev_priv->rps.pm_iir != 0); with rps.pm_iir = 0; With the v2 of this patch and the deferred pm enabling (which changed since the original patches) we're now able to get PM interrupts before we've brought up enabled rps. At this point in boot, we don't want to do anything about it, so we simply ignore it. Since writing the original assertion, the code has changed quite a bit, and I believe removing this assertion is perfectly safe. Signed-off-by:
-
Ben Widawsky authored
Just duplicates ironlake_irq_preinstall for now. v2: Add new PCH_NOP check (Damien) Add SDEIMR comment (Damien) Signed-off-by:
-
Ben Widawsky authored
HSW has some special requirements for the VEBOX. Splitting out the interrupt handler will make the code a bit nicer and less error prone when we begin to handle those. The slight functional change in this patch (queueing work while holding the spinlock) is intentional as it makes a subsequent patch a bit nicer. The change should also only effect HSW platforms. Reviewed-by:
-
Paulo Zanoni authored
Now we compute the results for both 1/2 and 5/6 partitioning and then use hsw_find_best_result to choose which one to use. With this patch, Haswell watermarks support should be in good shape. The only improvement we're missing is the case where the primary plane is disabled: we always assume it's enabled, so we take it into consideration when calculating the watermarks. v2: - Check the latency when finding the best result Signed-off-by:
-
