- 15 Sep, 2016 34 commits
-
-
Olaf Hering authored
[ Upstream commit 3cace4a6 ] All channel interrupts are bound to specific VCPUs in the guest at the point channel is created. While currently, we invoke the polling function on the correct CPU (the CPU to which the channel is bound to) in some cases we may run the polling function in a non-interrupt context. This potentially can cause an issue as the polling function can be interrupted by the channel callback function. Fix the issue by running the polling function on the appropriate CPU at interrupt level. Additional details of the issue being addressed by this patch are given below: Currently hv_fcopy_onchannelcallback is called from interrupts and also via the ->write function of hv_utils. Since the used global variables to maintain state are not thread safe the state can get out of sync. This affects the variable state as well as the channel inbound buffer. As suggested by KY adjust hv_poll_channel to always run the given callback on the cpu which the channel is bound to. This avoids the need for locking because all the util services are single threaded and only one transaction is active at any given point in time. Additionally, remove the context variable, they will always be the same as recv_channel. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
K. Y. Srinivasan authored
[ Upstream commit c0b200cf ] Util services such as KVP and FCOPY need assistance from daemon's running in user space. Increase the timeout so we don't prematurely terminate the transaction in the kernel. Host sets up a 60 second timeout for all util driver transactions. The host will retry the transaction if it times out. Set the guest timeout at 30 seconds. Signed-off-by:
-
Matias Bjørling authored
[ Upstream commit b5d4acd4 ] The get/set bad block interface defines good block, factory bad block, grown bad block, device reserved block, and host reserved block. Unfortunately the grown bad block was missing, leaving the offsets wrong for device and host side reserved blocks. This patch adds the missing type and corrects the offsets. Signed-off-by:
Matias Bjørling <m@bjorling.me> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Wenwei Tao authored
[ Upstream commit b262924b ] This patch fix two issues in rrpc_lun_gc 1. prio_list is protected by rrpc_lun's lock not nvm_lun's, so acquire rlun's lock instead of lun's before operate on the list. 2. we delete block from prio_list before allocating gcb, but gcb allocation may fail, we end without putting it back to the list, this makes the block won't get reclaimed in the future. To solve this issue, delete block after gcb allocation. Signed-off-by:
Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by:
-
Wenwei Tao authored
[ Upstream commit c27278bd ] When rrpc_write_ppalist_rq and rrpc_read_ppalist_rq succeed, we setup rq correctly, but nvm_submit_io may afterward fail since it cannot allocate request or nvme_nvm_command, we return error but forget to cleanup the previous work. Signed-off-by:
-
Javier Gonzalez authored
[ Upstream commit 3bfbc6ad ] The mempool allocation might fail. Make sure to return error when it does, instead of causing a kernel panic. Signed-off-by:
Javier Gonzalez <javier@cnexlabs.com> Signed-off-by:
-
Chao Yu authored
[ Upstream commit bdded155 ] When initing bad block list in gennvm_block_bb, once we move bad block from free_list to bb_list, we should maintain both stat info nr_free_blocks and nr_bad_blocks. So this patch fixes to add missing operation related to nr_free_blocks. Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
-
Wenwei Tao authored
[ Upstream commit 3cd485b1 ] Put bio when submission fails, since we get it before submission. And return error when backend device driver doesn't provide a submit_io method, thus we can end IO properly. Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit e37390be ] The "> MAX_CONTEXT" should be ">= MAX_CONTEXT". Otherwise we go one step beyond the end of the cfg->ctx_tbl[] array. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Manoj Kumar <manoj@linux.vnet.ibm.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Acked-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit e00e23bc ] This patch addresses two issues. First is the fact that the fm10k_mbx_free_irq was assuming msix_entries was valid and that will not always be the case. As such we need to add a check for if it is NULL. Second is the fact that we weren't freeing the IRQ if the mailbox API returned an error on trying to connect. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Reviewed-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit 587731e6 ] If the q_vector allocation fails we should free the resources associated with the MSI-X vector table. Signed-off-by:
-
Jacob Keller authored
[ Upstream commit 875328e4 ] The init_hw function may fail, and in the case of VFs, it might change the number of maximum queues available. Thus, for every flow which checks init_hw, we need to ensure that we clear the queue scheme before, and initialize it after. The fm10k_io_slot_reset path will end up triggering a reset so fm10k_reinit needs this change. The fm10k_io_error_detected and fm10k_io_resume also need to properly clear and reinitialize the queue scheme. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
-
Jacob Keller authored
[ Upstream commit 1343c65f ] A recent change modified init_hw in some flows the function may fail on VF devices. For example, if a VF doesn't yet own its own queues. However, many callers of init_hw didn't bother to check the error code. Other callers checked but only displayed diagnostic messages without actually handling the consequences. Fix this by (a) always returning and preventing the netdevice from going up, and (b) printing the diagnostic in every flow for consistency. This should resolve an issue where VF drivers would attempt to come up before the PF has finished assigning queues. In addition, change the dmesg output to explicitly show the actual function that failed, instead of combining reset_hw and init_hw into a single check, to help for future debugging. Fixes: 1d568b0f6424 ("fm10k: do not assume VF always has 1 queue") Signed-off-by:
-
Jacob Keller authored
[ Upstream commit 0e8d5b59 ] VF drivers must detect how many queues are available. Previously, the driver assumed that each VF has at minimum 1 queue. This assumption is incorrect, since it is possible that the PF has not yet assigned the queues to the VF by the time the VF checks. To resolve this, we added a check first to ensure that the first queue is infact owned by the VF at init_hw_vf time. However, the code flow did not reset hw->mac.max_queues to 0. In some cases, such as during reinit flows, we call init_hw_vf without clearing the previous value of hw->mac.max_queues. Due to this, when init_hw_vf errors out, if its error code is not properly handled the VF driver may still believe it has queues which no longer belong to it. Fix this by clearing the hw->mac.max_queues on exit due to errors. Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit 9f872986 ] This patch corrects an issue in which the polling routine would increase the budget for Rx to at least 1 per queue if multiple queues were present. This would result in Rx packets being processed when the budget was 0 which is meant to indicate that no Rx can be handled. Signed-off-by:
-
Jacob Keller authored
[ Upstream commit 8c7ee6d2 ] Based on hardware testing, the host interface supports up to 15368 bytes as the maximum frame size. To determine the correct MTU, we subtract 8 for the internal switch tag, 14 for the L2 header, and 4 for the appended FCS header, resulting in 15342 bytes of payload for our maximum MTU on jumbo frames. Signed-off-by:
Matthew Vick <matthew.vick@intel.com> Signed-off-by:
-
Jacob Keller authored
[ Upstream commit 1340181f ] It is possible that the PF has not yet assigned resources to the VF. Although rare, this could result in the VF attempting to read queues it does not own and result in FUM or THI faults in the PF. To prevent this, check queue 0 before we continue in init_hw_vf. Signed-off-by:
-
Loc Ho authored
[ Upstream commit 1382ea63 ] The X-Gene clock driver missed the divider shift operation when set the divider value. Signed-off-by:
Loc Ho <lho@apm.com> Fixes: 308964ca ("clk: Add APM X-Gene SoC clock driver") Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Dmitry Fleytman authored
[ Upstream commit b77ac46b ] This patch fixes possible division by zero in receive interrupt handler when working without adaptive interrupt moderation. The adaptive interrupt moderation mechanism is typically disabled on jumbo MTUs. Signed-off-by:
Dmitry Fleytman <dmitry@daynix.com> Signed-off-by:
Leonid Bloch <leonid@daynix.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Dmitriy Vyukov authored
[ Upstream commit 9eab46b7 ] e1000_clean_tx_irq cleans buffers and sets tx_ring->next_to_clean, then e1000_xmit_frame reuses the cleaned buffers. But there are no memory barriers when buffers gets recycled, so the recycled buffers can be corrupted. Use smp_store_release to update tx_ring->next_to_clean and smp_load_acquire to read tx_ring->next_to_clean to properly hand off buffers from e1000_clean_tx_irq to e1000_xmit_frame. The data race was found with KernelThreadSanitizer (KTSAN). Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Tested-by:
-
Alexander Duyck authored
[ Upstream commit 5d6002b7 ] This patch corrects an issue in which the polling routine would increase the budget for Rx to at least 1 per queue if multiple queues were present. This would result in Rx packets being processed when the budget was 0 which is meant to indicate that no Rx can be handled. Signed-off-by:
Darin Miller <darin.j.miller@intel.com> Signed-off-by:
-
Jan Beulich authored
[ Upstream commit be06998f ] The combined effect of commits 6423fc34 ("igb: do not re-init SR-IOV during probe") and ceee3450 ("igb: make sure SR-IOV init uses the right number of queues") causes VFs no longer getting set up, leading to NULL pointer dereferences due to the adapter's ->vf_data being NULL while ->vfs_allocated_count is non-zero. The first commit not only neglected the side effect of igb_sriov_reinit() that the second commit tried to account for, but also that of setting IGB_FLAG_HAS_MSIX, without which igb_enable_sriov() is effectively a no-op. Calling igb_{,re}set_interrupt_capability() as done here seems to address this, but I'm not sure whether this is better than sinply reverting the other two commits. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Tested-by:
-
Todd Fujinaka authored
[ Upstream commit 08c99129 ] The i210 has two EEPROM access registers that are located in non-standard offsets: EEARBC and EEMNGCTL. EEARBC was fixed previously and EEMNGCTL should also be corrected. Reported-by:
Roman Hodek <roman.aud@siemens.com> Signed-off-by:
Todd Fujinaka <todd.fujinaka@intel.com> Tested-by:
-
Jarod Wilson authored
[ Upstream commit 73bf8048 ] I've got a startech thunderbolt dock someone loaned me, which among other things, has the following device in it: 08:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03) This hotplugs just fine (kernel 4.2.0 plus a patch or two here): [ 863.020315] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k [ 863.020316] igb: Copyright (c) 2007-2014 Intel Corporation. [ 863.028657] igb 0000:08:00.0: enabling device (0000 -> 0002) [ 863.062089] igb 0000:08:00.0: added PHC on eth0 [ 863.062090] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 863.062091] igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x1) e8:ea:6a:00:1b:2a [ 863.062194] igb 0000:08:00.0: eth0: PBA No: 000200-000 [ 863.062196] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 863.064889] igb 0000:08:00.0 enp8s0: renamed from eth0 But disconnecting it is another story: [ 1002.807932] igb 0000:08:00.0: removed PHC on enp8s0 [ 1002.807944] igb 0000:08:00.0 enp8s0: PCIe link lost, device now detached [ 1003.341141] ------------[ cut here ]------------ [ 1003.341148] WARNING: CPU: 0 PID: 199 at lib/iomap.c:43 bad_io_access+0x38/0x40() [ 1003.341149] Bad IO access at port 0x0 () [ 1003.342767] Modules linked in: snd_usb_audio snd_usbmidi_lib snd_rawmidi igb dca firewire_ohci firewire_core crc_itu_t rfcomm ctr ccm arc4 iwlmvm mac80211 fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter bnep dm_mirror dm_region_hash dm_log dm_mod coretemp x86_pkg_temp_thermal intel_powerclamp kvm_intel snd_hda_codec_hdmi kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drbg [ 1003.342793] ansi_cprng aesni_intel hp_wmi aes_x86_64 iTCO_wdt lrw iTCO_vendor_support ppdev gf128mul sparse_keymap glue_helper ablk_helper cryptd snd_hda_codec_realtek snd_hda_codec_generic microcode snd_hda_intel uvcvideo iwlwifi snd_hda_codec videobuf2_vmalloc videobuf2_memops snd_hda_core videobuf2_core snd_hwdep btusb v4l2_common btrtl snd_seq btbcm btintel videodev cfg80211 snd_seq_device rtsx_pci_ms bluetooth pcspkr input_leds i2c_i801 media parport_pc memstick rfkill sg lpc_ich snd_pcm 8250_fintek parport joydev snd_timer snd soundcore hp_accel ie31200_edac mei_me lis3lv02d edac_core input_polldev mei hp_wireless shpchp tpm_infineon sch_fq_codel nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables autofs4 xfs libcrc32c sd_mod sr_mod cdrom rtsx_pci_sdmmc mmc_core crc32c_intel serio_raw rtsx_pci [ 1003.342822] nouveau ahci libahci mxm_wmi e1000e xhci_pci hwmon ptp drm_kms_helper pps_core xhci_hcd ttm wmi video ipv6 [ 1003.342839] CPU: 0 PID: 199 Comm: kworker/0:2 Not tainted 4.2.0-2.el7_UNSUPPORTED.x86_64 #1 [ 1003.342840] Hardware name: Hewlett-Packard HP ZBook 15 G2/2253, BIOS M70 Ver. 01.07 02/26/2015 [ 1003.342843] Workqueue: pciehp-3 pciehp_power_thread [ 1003.342844] ffffffff81a90655 ffff8804866d3b48 ffffffff8164763a 0000000000000000 [ 1003.342846] ffff8804866d3b98 ffff8804866d3b88 ffffffff8107134a ffff8804866d3b88 [ 1003.342847] ffff880486f46000 ffff88046c8a8000 ffff880486f46840 ffff88046c8a8098 [ 1003.342848] Call Trace: [ 1003.342852] [<ffffffff8164763a>] dump_stack+0x45/0x57 [ 1003.342855] [<ffffffff8107134a>] warn_slowpath_common+0x8a/0xc0 [ 1003.342857] [<ffffffff810713c6>] warn_slowpath_fmt+0x46/0x50 [ 1003.342859] [<ffffffff8133719e>] ? pci_disable_msix+0x3e/0x50 [ 1003.342860] [<ffffffff812f6328>] bad_io_access+0x38/0x40 [ 1003.342861] [<ffffffff812f6567>] pci_iounmap+0x27/0x40 [ 1003.342865] [<ffffffffa0b728d7>] igb_remove+0xc7/0x160 [igb] [ 1003.342867] [<ffffffff8132189f>] pci_device_remove+0x3f/0xc0 [ 1003.342869] [<ffffffff81433426>] __device_release_driver+0x96/0x130 [ 1003.342870] [<ffffffff814334e3>] device_release_driver+0x23/0x30 [ 1003.342871] [<ffffffff8131b404>] pci_stop_bus_device+0x94/0xa0 [ 1003.342872] [<ffffffff8131b3ad>] pci_stop_bus_device+0x3d/0xa0 [ 1003.342873] [<ffffffff8131b3ad>] pci_stop_bus_device+0x3d/0xa0 [ 1003.342874] [<ffffffff8131b516>] pci_stop_and_remove_bus_device+0x16/0x30 [ 1003.342876] [<ffffffff81333f5b>] pciehp_unconfigure_device+0x9b/0x180 [ 1003.342877] [<ffffffff81333a73>] pciehp_disable_slot+0x43/0xb0 [ 1003.342878] [<ffffffff81333b6d>] pciehp_power_thread+0x8d/0xb0 [ 1003.342885] [<ffffffff810881b2>] process_one_work+0x152/0x3d0 [ 1003.342886] [<ffffffff8108854a>] worker_thread+0x11a/0x460 [ 1003.342887] [<ffffffff81088430>] ? process_one_work+0x3d0/0x3d0 [ 1003.342890] [<ffffffff8108ddd9>] kthread+0xc9/0xe0 [ 1003.342891] [<ffffffff8108dd10>] ? kthread_create_on_node+0x180/0x180 [ 1003.342893] [<ffffffff8164e29f>] ret_from_fork+0x3f/0x70 [ 1003.342894] [<ffffffff8108dd10>] ? kthread_create_on_node+0x180/0x180 [ 1003.342895] ---[ end trace 65a77e06d5aa9358 ]--- Upon looking at the igb driver, I see that igb_rd32() attempted to read from hw_addr and failed, so it set hw->hw_addr to NULL and spit out the message in the log output above, "PCIe link lost, device now detached". Well, now that hw_addr is NULL, the attempt to call pci_iounmap is obviously not going to go well. As suggested by Mark Rustad, do something similar to what ixgbe does, and save a copy of hw_addr as adapter->io_addr, so we can still call pci_iounmap on it on teardown. Additionally, for consistency, make the pci_iomap call assignment directly to io_addr, so map and unmap match. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Tested-by:
-
Anjali Singhai Jain authored
[ Upstream commit 857942fd ] If the driver calls skb_set_hash even with a zero hash, that indicates to the stack that the hash calculation is offloaded in hardware. So the Stack doesn't do a SW hash which is required for load balancing if the user decides to turn of rx-hashing on our device. This patch fixes the path so that we do not call skb_set_hash if the feature is disabled. Change-ID: Ic4debfa4ff91b5a72e447348a75768ed7a2d3e1b Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Shannon Nelson authored
[ Upstream commit f1199998 ] Clean the whole mac filter list when resetting after an intermediate add or delete push to the firmware. The code had evolved from using a list from the stack to a heap allocation, but the memset() didn't follow the change correctly. This now cleans the whole list rather that just part of the first element. Change-ID: I4cd03d5a103b7407dd8556a3a231e800f2d6f2d5 Reported-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Mitch Williams authored
[ Upstream commit fdb47ae8 ] If the driver gets unloaded during reset recovery, it's possible that it will attempt to free resources when they're already free. Add a check to make sure that the Tx and Rx rings actually exist before dereferencing them to free resources. Change-ID: I4d2b7e9ede49f634d421a4c5deaa5446bc755eee Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Mitch Williams authored
[ Upstream commit b7b713a8 ] When VFs are created, the MAC address defaults to all zeros, indicating to the VF driver that it should use a random MAC address. However, the PF driver was incorrectly adding this zero MAC to the filter table, along with the VF's randomly generated MAC address. Check for a good address before adding the default filter. While we're at it, make the error message a bit more useful. Change-ID: Ia100947d68140e0f73a19ba755cbffc3e79a8fcf Signed-off-by:
-
Mitch Williams authored
[ Upstream commit b36e9ab5 ] The virtual channel interface was using incorrect semantics to remove MAC addresses, which would leave incorrect filters active when using VLANs. To correct this, add a new function that unconditionally removes MAC addresses from all VLANs, and call this function when the VF requests a MAC filter removal. Change-ID: I69826908ae4f6c847f5bf9b32f11faa760189c74 Signed-off-by:
-
Kiran Patil authored
[ Upstream commit a42e7a36 ] This patch fixes the memory leak which would be seen otherwise when user programs flow-director filter using ethtool (sideband filter programming). When ethtool is used to program flow directory filter, 'raw_buf' gets allocated and it is supposed to be freed as part of queue cleanup. But check of 'tx_buffer->skb' was preventing it from being freed. Change-ID: Ief4f0a1a32a653180498bf6e987c1b4342ab8923 Signed-off-by:
Kiran Patil <kiran.patil@intel.com> Tested-by:
-
Jesse Brandeburg authored
[ Upstream commit 0e4425ed ] The driver was being called by VLAN, bonding, teaming operations that expected to be able to hold locks like rcu_read_lock(). This causes the driver to be held to the requirement to not sleep, and was found by the kernel debug options for checking sleep inside critical section, and the locking validator. Change-ID: Ibc68c835f5ffa8ffe0638ffe910a66fc5649a7f7 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Anjali Singhai Jain authored
[ Upstream commit 6a7fded7 ] This patch fixes the issue of forcing WB too often causing us to not benefit from NAPI. Without this patch we were forcing WB/arming interrupt too often taking away the benefits of NAPI and causing a performance impact. With this patch we disable force WB in the clean routine for X710 and XL710 adapters. X722 adapters do not enable interrupt to force a WB and benefit from WB_ON_ITR and hence force WB is left enabled for those adapters. For XL710 and X710 adapters if we have less than 4 packets pending a software Interrupt triggered from service task will force a WB. This patch also changes the conditions for setting RS bit as described in code comments. This optimizes when the HW does a tail bump amd when it does a WB. It also optimizes when we do a wmb. Change-ID: Id831e1ae7d3e2ec3f52cd0917b41ce1d22d75d9d Signed-off-by:
-
Mitch Williams authored
[ Upstream commit 1418c345 ] When a lot (many hundreds) of MAC or VLAN filters are added at one time, we can overflow the Admin Queue buffer size with all the requests. Unfortunately, the driver would then calculate the message size incorrectly, causing it to be rejected by the PF. Furthermore, there was no mechanism to trigger another request to allow for configuring the rest of the filters that didn't fit into the first request. To fix this, recalculate the correct buffer size when we detect the overflow condition instead of just assuming the max buffer size. Also, don't clear the request bit in adapter->aq_required when we have an overflow, so that the rest of the filters can be processed later. Change-ID: Idd7cbbc5af31315e0dcb1b10e6a02ad9817ce65c Signed-off-by:
-
Anjali Singhai Jain authored
[ Upstream commit 4f2f017c ] HW/NVM sets a limit of no less than 256 bytes for MSS. Stack can send as low as 76 bytes MSS. This patch lowers the HW limit to 64 bytes to avoid MDDs from firing and causing a reset when the MSS is lower than 256. Change-ID: I36b500a6bb227d283c3e321a7718e0672b11fab0 Signed-off-by:
-
- 07 Sep, 2016 6 commits
-
-
Greg Kroah-Hartman authored
-
Konstantin Khlebnikov authored
commit 17d0774f upstream. Attributes declared with __ATTR_PREALLOC use sysfs_kf_read() which returns zero bytes for non-zero offset. This breaks script checkarray in mdadm tool in debian where /bin/sh is 'dash' because its builtin 'read' reads only one byte at a time. Script gets 'i' instead of 'idle' when reads current action from /sys/block/$dev/md/sync_action and as a result does nothing. This patch adds trivial implementation of partial read: generate whole string and move required part into buffer head. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 4ef67a8c ("sysfs/kernfs: make read requests on pre-alloc files use the buffer.") Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=787950Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Quentin Schulz authored
commit 5d17d3b4 upstream. The "name" variable's memory is now freed when the device is destructed thanks to devm function. Signed-off-by:
Quentin Schulz <quentin.schulz@free-electrons.com> Reported-by:
Guenter Roeck <linux@roeck-us.net> Fixes: e0f8a24e ("staging:iio::hwmon interface client driver.") Fixes: 61bb53bc ("hwmon: (iio_hwmon) Add support for humidity sensors") Signed-off-by:
-
Andrej Krutak authored
commit b027d112 upstream. The commit 02fc76f6 changed base of the sysfs attributes from device to card. The "show" callbacks dereferenced wrong objects because of this. Fixes: 02fc76f6 ('ALSA: line6: Create sysfs via snd_card_add_dev_attr()') Reviewed-by:
Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by:
Andrej Krutak <dev@andree.sk> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Andrej Krutak authored
commit adc8a43a upstream. Done, because line6_stream_stop() locks and calls line6_unlink_audio_urbs(), which in turn invokes audio_out_callback(), which tries to lock 2nd time. Fixes: ============================================= [ INFO: possible recursive locking detected ] 4.4.15+ #15 Not tainted --------------------------------------------- mplayer/3591 is trying to acquire lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa27655>] audio_out_callback+0x70/0x110 [snd_usb_line6] but task is already holding lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&line6pcm->out.lock)->rlock); lock(&(&line6pcm->out.lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by mplayer/3591: #0: (snd_pcm_link_rwlock){.-.-..}, at: [<bf8d49a7>] snd_pcm_stream_lock+0x1e/0x40 [snd_pcm] #1: (&(&substream->self_group.lock)->rlock){-.-...}, at: [<bf8d49af>] snd_pcm_stream_lock+0x26/0x40 [snd_pcm] #2: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] stack backtrace: CPU: 0 PID: 3591 Comm: mplayer Not tainted 4.4.15+ #15 Hardware name: Generic AM33XX (Flattened Device Tree) [<c0015d85>] (unwind_backtrace) from [<c001253d>] (show_stack+0x11/0x14) [<c001253d>] (show_stack) from [<c02f1bdf>] (dump_stack+0x8b/0xac) [<c02f1bdf>] (dump_stack) from [<c0076f43>] (__lock_acquire+0xc8b/0x1780) [<c0076f43>] (__lock_acquire) from [<c007810d>] (lock_acquire+0x99/0x1c0) [<c007810d>] (lock_acquire) from [<c06171e7>] (_raw_spin_lock_irqsave+0x3f/0x4c) [<c06171e7>] (_raw_spin_lock_irqsave) from [<bfa27655>] (audio_out_callback+0x70/0x110 [snd_usb_line6]) [<bfa27655>] (audio_out_callback [snd_usb_line6]) from [<c04294db>] (__usb_hcd_giveback_urb+0x53/0xd0) [<c04294db>] (__usb_hcd_giveback_urb) from [<c046388d>] (musb_giveback+0x3d/0x98) [<c046388d>] (musb_giveback) from [<c04647f5>] (musb_urb_dequeue+0x6d/0x114) [<c04647f5>] (musb_urb_dequeue) from [<c042ac11>] (usb_hcd_unlink_urb+0x39/0x98) [<c042ac11>] (usb_hcd_unlink_urb) from [<bfa26a87>] (line6_unlink_audio_urbs+0x6a/0x6c [snd_usb_line6]) [<bfa26a87>] (line6_unlink_audio_urbs [snd_usb_line6]) from [<bfa26acb>] (line6_stream_stop+0x42/0x5c [snd_usb_line6]) [<bfa26acb>] (line6_stream_stop [snd_usb_line6]) from [<bfa26fe7>] (snd_line6_trigger+0xb6/0xf4 [snd_usb_line6]) [<bfa26fe7>] (snd_line6_trigger [snd_usb_line6]) from [<bf8d47b7>] (snd_pcm_do_stop+0x36/0x38 [snd_pcm]) [<bf8d47b7>] (snd_pcm_do_stop [snd_pcm]) from [<bf8d462f>] (snd_pcm_action_single+0x22/0x40 [snd_pcm]) [<bf8d462f>] (snd_pcm_action_single [snd_pcm]) from [<bf8d46f9>] (snd_pcm_action+0xac/0xb0 [snd_pcm]) [<bf8d46f9>] (snd_pcm_action [snd_pcm]) from [<bf8d4b61>] (snd_pcm_drop+0x38/0x64 [snd_pcm]) [<bf8d4b61>] (snd_pcm_drop [snd_pcm]) from [<bf8d6233>] (snd_pcm_common_ioctl1+0x7fe/0xbe8 [snd_pcm]) [<bf8d6233>] (snd_pcm_common_ioctl1 [snd_pcm]) from [<bf8d6779>] (snd_pcm_playback_ioctl1+0x15c/0x51c [snd_pcm]) [<bf8d6779>] (snd_pcm_playback_ioctl1 [snd_pcm]) from [<bf8d6b59>] (snd_pcm_playback_ioctl+0x20/0x28 [snd_pcm]) [<bf8d6b59>] (snd_pcm_playback_ioctl [snd_pcm]) from [<c016714b>] (do_vfs_ioctl+0x3af/0x5c8) Fixes: 63e20df1 ('ALSA: line6: Reorganize PCM stream handling') Reviewed-by:
-
Andrej Krutak authored
commit 7e4379ea upstream. If there's an error, pcm is released in line6_pcm_acquire already. Fixes: 247d95ee ('ALSA: line6: Handle error from line6_pcm_acquire()') Reviewed-by:
-
