- 13 Aug, 2018 35 commits
-
-
Saeed Mahameed authored
Have a ethtool rx flow spec validation helper function per flow type. Signed-off-by:Saeed Mahameed <saeedm@mellanox.com>
-
Vlad Buslov authored
Lockdep reports deadlock for following locking scenario in ife action: Task one: 1) Executes ife action update. 2) Takes tcfa_lock. 3) Waits on ife_mod_lock which is already taken by task two. Task two: 1) Executes any path that obtains ife_mod_lock without disabling bh (any path that takes ife_mod_lock while holding tcfa_lock has bh disabled) like loading a meta module, or creating new action. 2) Takes ife_mod_lock. 3) Task is preempted by rate estimator timer. 4) Timer callback waits on tcfa_lock which is taken by task one. In described case tasks deadlock because they take same two locks in different order. To prevent potential deadlock reported by lockdep, always disable bh when obtaining ife_mod_lock. Lockdep warning: [ 508.101192] ===================================================== [ 508.107708] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [ 508.114728] 4.18.0-rc8+ #646 Not tainted [ 508.119050] ----------------------------------------------------- [ 508.125559] tc/5460 [HC0[0]:SC0[2]:HE1:SE0] is trying to acquire: [ 508.132025] 000000005a938c68 (ife_mod_lock){++++}, at: find_ife_oplist+0x1e/0xc0 [act_ife] [ 508.140996] and this task is already holding: [ 508.147548] 00000000d46f6c56 (&(&p->tcfa_lock)->rlock){+.-.}, at: tcf_ife_init+0x6ae/0xf40 [act_ife] [ 508.157371] which would create a new lock dependency: [ 508.162828] (&(&p->tcfa_lock)->rlock){+.-.} -> (ife_mod_lock){++++} [ 508.169572] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 508.178197] (&(&p->tcfa_lock)->rlock){+.-.} [ 508.178201] ... which became SOFTIRQ-irq-safe at: [ 508.189771] _raw_spin_lock+0x2c/0x40 [ 508.193906] est_fetch_counters+0x41/0xb0 [ 508.198391] est_timer+0x83/0x3c0 [ 508.202180] call_timer_fn+0x16a/0x5d0 [ 508.206400] run_timer_softirq+0x399/0x920 [ 508.210967] __do_softirq+0x157/0x97d [ 508.215102] irq_exit+0x152/0x1c0 [ 508.218888] smp_apic_timer_interrupt+0xc0/0x4e0 [ 508.223976] apic_timer_interrupt+0xf/0x20 [ 508.228540] cpuidle_enter_state+0xf8/0x5d0 [ 508.233198] do_idle+0x28a/0x350 [ 508.236881] cpu_startup_entry+0xc7/0xe0 [ 508.241296] start_secondary+0x2e8/0x3f0 [ 508.245678] secondary_startup_64+0xa5/0xb0 [ 508.250347] to a SOFTIRQ-irq-unsafe lock: (ife_mod_lock){++++} [ 508.256531] ... which became SOFTIRQ-irq-unsafe at: [ 508.267279] ... [ 508.267283] _raw_write_lock+0x2c/0x40 [ 508.273653] register_ife_op+0x118/0x2c0 [act_ife] [ 508.278926] do_one_initcall+0xf7/0x4d9 [ 508.283214] do_init_module+0x18b/0x44e [ 508.287521] load_module+0x4167/0x5730 [ 508.291739] __do_sys_finit_module+0x16d/0x1a0 [ 508.296654] do_syscall_64+0x7a/0x3f0 [ 508.300788] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 508.306302] other info that might help us debug this: [ 508.315286] Possible interrupt unsafe locking scenario: [ 508.322771] CPU0 CPU1 [ 508.327681] ---- ---- [ 508.332604] lock(ife_mod_lock); [ 508.336300] local_irq_disable(); [ 508.342608] lock(&(&p->tcfa_lock)->rlock); [ 508.349793] lock(ife_mod_lock); [ 508.355990] <Interrupt> [ 508.358974] lock(&(&p->tcfa_lock)->rlock); [ 508.363803] *** DEADLOCK *** [ 508.370715] 2 locks held by tc/5460: [ 508.374680] #0: 00000000e27e4fa4 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x583/0x7b0 [ 508.383366] #1: 00000000d46f6c56 (&(&p->tcfa_lock)->rlock){+.-.}, at: tcf_ife_init+0x6ae/0xf40 [act_ife] [ 508.393648] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 508.403505] -> (&(&p->tcfa_lock)->rlock){+.-.} ops: 1001553 { [ 508.409646] HARDIRQ-ON-W at: [ 508.413136] _raw_spin_lock_bh+0x34/0x40 [ 508.419059] gnet_stats_start_copy_compat+0xa2/0x230 [ 508.426021] gnet_stats_start_copy+0x16/0x20 [ 508.432333] tcf_action_copy_stats+0x95/0x1d0 [ 508.438735] tcf_action_dump_1+0xb0/0x4e0 [ 508.444795] tcf_action_dump+0xca/0x200 [ 508.450673] tcf_exts_dump+0xd9/0x320 [ 508.456392] fl_dump+0x1b7/0x4a0 [cls_flower] [ 508.462798] tcf_fill_node+0x380/0x530 [ 508.468601] tfilter_notify+0xdf/0x1c0 [ 508.474404] tc_new_tfilter+0x84a/0xc90 [ 508.480270] rtnetlink_rcv_msg+0x5bd/0x7b0 [ 508.486419] netlink_rcv_skb+0x184/0x220 [ 508.492394] netlink_unicast+0x31b/0x460 [ 508.507411] netlink_sendmsg+0x3fb/0x840 [ 508.513390] sock_sendmsg+0x7b/0xd0 [ 508.518907] ___sys_sendmsg+0x4c6/0x610 [ 508.524797] __sys_sendmsg+0xd7/0x150 [ 508.530510] do_syscall_64+0x7a/0x3f0 [ 508.536201] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 508.543301] IN-SOFTIRQ-W at: [ 508.546834] _raw_spin_lock+0x2c/0x40 [ 508.552522] est_fetch_counters+0x41/0xb0 [ 508.558571] est_timer+0x83/0x3c0 [ 508.563912] call_timer_fn+0x16a/0x5d0 [ 508.569699] run_timer_softirq+0x399/0x920 [ 508.575840] __do_softirq+0x157/0x97d [ 508.581538] irq_exit+0x152/0x1c0 [ 508.586882] smp_apic_timer_interrupt+0xc0/0x4e0 [ 508.593533] apic_timer_interrupt+0xf/0x20 [ 508.599686] cpuidle_enter_state+0xf8/0x5d0 [ 508.605895] do_idle+0x28a/0x350 [ 508.611147] cpu_startup_entry+0xc7/0xe0 [ 508.617097] start_secondary+0x2e8/0x3f0 [ 508.623029] secondary_startup_64+0xa5/0xb0 [ 508.629245] INITIAL USE at: [ 508.632686] _raw_spin_lock_bh+0x34/0x40 [ 508.638557] gnet_stats_start_copy_compat+0xa2/0x230 [ 508.645491] gnet_stats_start_copy+0x16/0x20 [ 508.651719] tcf_action_copy_stats+0x95/0x1d0 [ 508.657992] tcf_action_dump_1+0xb0/0x4e0 [ 508.663937] tcf_action_dump+0xca/0x200 [ 508.669716] tcf_exts_dump+0xd9/0x320 [ 508.675337] fl_dump+0x1b7/0x4a0 [cls_flower] [ 508.681650] tcf_fill_node+0x380/0x530 [ 508.687366] tfilter_notify+0xdf/0x1c0 [ 508.693031] tc_new_tfilter+0x84a/0xc90 [ 508.698820] rtnetlink_rcv_msg+0x5bd/0x7b0 [ 508.704869] netlink_rcv_skb+0x184/0x220 [ 508.710758] netlink_unicast+0x31b/0x460 [ 508.716627] netlink_sendmsg+0x3fb/0x840 [ 508.722510] sock_sendmsg+0x7b/0xd0 [ 508.727931] ___sys_sendmsg+0x4c6/0x610 [ 508.733729] __sys_sendmsg+0xd7/0x150 [ 508.739346] do_syscall_64 +0x7a/0x3f0 [ 508.744943] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 508.751930] } [ 508.753964] ... key at: [<ffffffff916b3e20>] __key.61145+0x0/0x40 [ 508.760946] ... acquired at: [ 508.764294] _raw_read_lock+0x2f/0x40 [ 508.768513] find_ife_oplist+0x1e/0xc0 [act_ife] [ 508.773692] tcf_ife_init+0x82f/0xf40 [act_ife] [ 508.778785] tcf_action_init_1+0x510/0x750 [ 508.783468] tcf_action_init+0x1e8/0x340 [ 508.787938] tcf_action_add+0xc5/0x240 [ 508.792241] tc_ctl_action+0x203/0x2a0 [ 508.796550] rtnetlink_rcv_msg+0x5bd/0x7b0 [ 508.801200] netlink_rcv_skb+0x184/0x220 [ 508.805674] netlink_unicast+0x31b/0x460 [ 508.810129] netlink_sendmsg+0x3fb/0x840 [ 508.814611] sock_sendmsg+0x7b/0xd0 [ 508.818665] ___sys_sendmsg+0x4c6/0x610 [ 508.823029] __sys_sendmsg+0xd7/0x150 [ 508.827246] do_syscall_64+0x7a/0x3f0 [ 508.831483] entry_SYSCALL_64_after_hwframe+0x49/0xbe the dependencies between the lock to be acquired [ 508.838945] and SOFTIRQ-irq-unsafe lock: [ 508.851177] -> (ife_mod_lock){++++} ops: 95 { [ 508.855920] HARDIRQ-ON-W at: [ 508.859478] _raw_write_lock+0x2c/0x40 [ 508.865264] register_ife_op+0x118/0x2c0 [act_ife] [ 508.872071] do_one_initcall+0xf7/0x4d9 [ 508.877947] do_init_module+0x18b/0x44e [ 508.883819] load_module+0x4167/0x5730 [ 508.889595] __do_sys_finit_module+0x16d/0x1a0 [ 508.896043] do_syscall_64+0x7a/0x3f0 [ 508.901734] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 508.908827] HARDIRQ-ON-R at: [ 508.912359] _raw_read_lock+0x2f/0x40 [ 508.918043] find_ife_oplist+0x1e/0xc0 [act_ife] [ 508.924692] tcf_ife_init+0x82f/0xf40 [act_ife] [ 508.931252] tcf_action_init_1+0x510/0x750 [ 508.937393] tcf_action_init+0x1e8/0x340 [ 508.943366] tcf_action_add+0xc5/0x240 [ 508.949130] tc_ctl_action+0x203/0x2a0 [ 508.954922] rtnetlink_rcv_msg+0x5bd/0x7b0 [ 508.961024] netlink_rcv_skb+0x184/0x220 [ 508.966970] netlink_unicast+0x31b/0x460 [ 508.972915] netlink_sendmsg+0x3fb/0x840 [ 508.978859] sock_sendmsg+0x7b/0xd0 [ 508.984400] ___sys_sendmsg+0x4c6/0x610 [ 508.990264] __sys_sendmsg+0xd7/0x150 [ 508.995952] do_syscall_64+0x7a/0x3f0 [ 509.001643] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 509.008722] SOFTIRQ-ON-W at:\ [ 509.012242] _raw_write_lock+0x2c/0x40 [ 509.018013] register_ife_op+0x118/0x2c0 [act_ife] [ 509.024841] do_one_initcall+0xf7/0x4d9 [ 509.030720] do_init_module+0x18b/0x44e [ 509.036604] load_module+0x4167/0x5730 [ 509.042397] __do_sys_finit_module+0x16d/0x1a0 [ 509.048865] do_syscall_64+0x7a/0x3f0 [ 509.054551] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 509.061636] SOFTIRQ-ON-R at: [ 509.065145] _raw_read_lock+0x2f/0x40 [ 509.070854] find_ife_oplist+0x1e/0xc0 [act_ife] [ 509.077515] tcf_ife_init+0x82f/0xf40 [act_ife] [ 509.084051] tcf_action_init_1+0x510/0x750 [ 509.090172] tcf_action_init+0x1e8/0x340 [ 509.096124] tcf_action_add+0xc5/0x240 [ 509.101891] tc_ctl_action+0x203/0x2a0 [ 509.107671] rtnetlink_rcv_msg+0x5bd/0x7b0 [ 509.113811] netlink_rcv_skb+0x184/0x220 [ 509.119768] netlink_unicast+0x31b/0x460 [ 509.125716] netlink_sendmsg+0x3fb/0x840 [ 509.131668] sock_sendmsg+0x7b/0xd0 [ 509.137167] ___sys_sendmsg+0x4c6/0x610 [ 509.143010] __sys_sendmsg+0xd7/0x150 [ 509.148718] do_syscall_64+0x7a/0x3f0 [ 509.154443] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 509.161533] INITIAL USE at: [ 509.164956] _raw_read_lock+0x2f/0x40 [ 509.170574] find_ife_oplist+0x1e/0xc0 [act_ife] [ 509.177134] tcf_ife_init+0x82f/0xf40 [act_ife] [ 509.183619] tcf_action_init_1+0x510/0x750 [ 509.189674] tcf_action_init+0x1e8/0x340 [ 509.195534] tcf_action_add+0xc5/0x240 [ 509.201229] tc_ctl_action+0x203/0x2a0 [ 509.206920] rtnetlink_rcv_msg+0x5bd/0x7b0 [ 509.212936] netlink_rcv_skb+0x184/0x220 [ 509.218818] netlink_unicast+0x31b/0x460 [ 509.224699] netlink_sendmsg+0x3fb/0x840 [ 509.230581] sock_sendmsg+0x7b/0xd0 [ 509.235984] ___sys_sendmsg+0x4c6/0x610 [ 509.241791] __sys_sendmsg+0xd7/0x150 [ 509.247425] do_syscall_64+0x7a/0x3f0 [ 509.253007] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 509.259975] } [ 509.261998] ... key at: [<ffffffffc1554258>] ife_mod_lock+0x18/0xffffffffffff8dc0 [act_ife] [ 509.271569] ... acquired at: [ 509.274912] _raw_read_lock+0x2f/0x40 [ 509.279134] find_ife_oplist+0x1e/0xc0 [act_ife] [ 509.284324] tcf_ife_init+0x82f/0xf40 [act_ife] [ 509.289425] tcf_action_init_1+0x510/0x750 [ 509.294068] tcf_action_init+0x1e8/0x340 [ 509.298553] tcf_action_add+0xc5/0x240 [ 509.302854] tc_ctl_action+0x203/0x2a0 [ 509.307153] rtnetlink_rcv_msg+0x5bd/0x7b0 [ 509.311805] netlink_rcv_skb+0x184/0x220 [ 509.316282] netlink_unicast+0x31b/0x460 [ 509.320769] netlink_sendmsg+0x3fb/0x840 [ 509.325248] sock_sendmsg+0x7b/0xd0 [ 509.329290] ___sys_sendmsg+0x4c6/0x610 [ 509.333687] __sys_sendmsg+0xd7/0x150 [ 509.337902] do_syscall_64+0x7a/0x3f0 [ 509.342116] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 509.349601] stack backtrace: [ 509.354663] CPU: 6 PID: 5460 Comm: tc Not tainted 4.18.0-rc8+ #646 [ 509.361216] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 Fixes: ef6980b6 ("introduce IFE action") Signed-off-by:Vlad Buslov <vladbu@mellanox.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-08-13 There was one pretty bad bug that slipped into the MediaTek HCI driver in the last bluetooth-next pull request. Would it be possible to get this one-liner fix pulled to net-next before you make your first 4.19 pull request for Linus? Thanks. ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-08-13 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add driver XDP support for veth. This can be used in conjunction with redirect of another XDP program e.g. sitting on NIC so the xdp_frame can be forwarded to the peer veth directly without modification, from Toshiaki. 2) Add a new BPF map type REUSEPORT_SOCKARRAY and prog type SK_REUSEPORT in order to provide more control and visibility on where a SO_REUSEPORT sk should be located, and the latter enables to directly select a sk from the bpf map. This also enables map-in-map for application migration use cases, from Martin. 3) Add a new BPF helper bpf_skb_ancestor_cgroup_id() that returns the id of cgroup v2 that is the ancestor of the cgroup associated with the skb at the ancestor_level, from Andrey. 4) Implement BPF fs map pretty-print support based on BTF data for regular hash table and LRU map, from Yonghong. 5) Decouple the ability to attach BTF for a map from the key and value pretty-printer in BPF fs, and enable further support of BTF for maps for percpu and LPM trie, from Daniel. 6) Implement a better BPF sample of using XDP's CPU redirect feature for load balancing SKB processing to remote CPU. The sample implements the same XDP load balancing as Suricata does which is symmetric hash based on IP and L4 protocol, from Jesper. 7) Revert adding NULL pointer check with WARN_ON_ONCE() in __xdp_return()'s critical path as it is ensured that the allocator is present, from Björn. ==================== Signed-off-by: -
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2018-08-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== pull-request: wireless-drivers-next 2018-08-12 wireless-drivers-next patches for 4.19 Last set of new features for 4.19. Most notable is simplifying SSB debugging code with two Kconfig option removals and fixing mt76 USB build problems. Major changes: ath10k * add debugfs file warm_hw_reset wil6210 * add debugfs files tx_latency, link_stats and link_stats_global * add 3-MSI support * allow scan on AP interface * support max aggregation window size 64 ssb * remove CONFIG_SSB_SILENT and CONFIG_SSB_DEBUG Kconfig options mt76 * fix build problems with recently added USB support ==================== Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/cavium/liquidio/lio_ethtool.c: In function 'lio_set_link_ksettings': drivers/net/ethernet/cavium/liquidio/lio_ethtool.c:392:6: warning: variable 'is25G' set but not used [-Wunused-but-set-variable] Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c: In function 'print_port_info': drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:5147:14: warning: variable 'spd' set but not used [-Wunused-but-set-variable] variable 'spd' is set but not used since commit 547fd272 ("cxgb4: Warn if device doesn't have enough PCI bandwidth") Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Yue Haibing authored
Remove duplicated include. Signed-off-by:
-
YueHaibing authored
Remove duplicated include linux/netdevice.h Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Li RongQing authored
The patches includes following change: *Use modern kvzalloc()/kvfree() instead of custom allocations. *Remove order argument for alloc_pg_vec, it can get from req. *Remove order argument for free_pg_vec, free_pg_vec now uses kvfree which does not need order argument. *Remove pg_vec_order from struct packet_ring_buffer, no longer need to save/restore 'order' *Remove variable 'order' for packet_set_ring, it is now unused Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Zong Li authored
There is an unalignment access about the structure 'trace_event_raw_fib_table_lookup'. In include/trace/events/fib.h, there is a memory operation which casting the 'src' data member to a pointer, and then store a value to this pointer point to. p32 = (__be32 *) __entry->src; *p32 = flp->saddr; The offset of 'src' in structure trace_event_raw_fib_table_lookup is not four bytes alignment. On some architectures, they don't permit the unalignment access, it need to pay the price to handle this situation in exception handler. Adjust the layout of structure to avoid this case. Fixes: 9f323973 ("net/ipv4: Udate fib_table_lookup tracepoint") Signed-off-by:
Zong Li <zong@andestech.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David S. Miller authored
Jamal Hadi Salim says: ==================== net: sched: actions rename for grep-ability and consistency Having a structure (example tcf_mirred) and a function with the same name is not good for readability or grepability. This long overdue patchset improves it and make sure there is consistency across all actions ==================== Signed-off-by: -
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Jamal Hadi Salim authored
Signed-off-by:
-
Willem de Bruijn authored
The kbuild robot shows build failure on machines without CONFIG_SMP: drivers/net/virtio_net.c:1916:10: error: implicit declaration of function 'cpumask_next_wrap' cpumask_next_wrap is exported from lib/cpumask.o, which has lib-$(CONFIG_SMP) += cpumask.o same as other functions, also define it as static inline in the NR_CPUS==1 branch in include/linux/cpumask.h. If wrap is true and next == start, return nr_cpumask_bits, or 1. Else wrap across the range of valid cpus, here [0]. Fixes: 2ca653d6 ("virtio_net: Stripe queue affinities across cores.") Signed-off-by:Willem de Bruijn <willemb@google.com> Tested-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Heiner Kallweit authored
There have been two reports that network doesn't come back on resume from suspend when using MSI-X. Both cases affect the same chip version (RTL8168g - version 40), on different systems. Falling back to MSI fixes the issue. Even though we don't really have a proof yet that the network chip version is to blame, let's disable MSI-X for this version. Reported-by:
Steve Dodd <steved424@gmail.com> Reported-by:
Lou Reed <gogen@disroot.org> Tested-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
Moritz Fischer says: ==================== net: nixge: Minor cleanups in preparation of my 64-bit support series, here's some minor cleanup in preparation that gets rid of unneccesary accesses to the descriptor application fields. I've confirmed that the hardware does not access the fields in all our configurations. ==================== Signed-off-by: -
Moritz Fischer authored
Don't store skb in app4 field of descriptor since it is not being used anywhere (including hardware). Signed-off-by:
Moritz Fischer <mdf@kernel.org> Signed-off-by:
-
Moritz Fischer authored
Do not zero application specific fields in DMA descriptors. The hardware does ignore them, so should software. Signed-off-by:
-
Wei Wang authored
In l2tp code, if it is a L2TP_UDP_ENCAP tunnel, tunnel->sk points to a UDP socket. User could call sendmsg() on both this tunnel and the UDP socket itself concurrently. As l2tp_xmit_skb() holds socket lock and call __sk_dst_check() to refresh sk->sk_dst_cache, while udpv6_sendmsg() is lockless and call sk_dst_check() to refresh sk->sk_dst_cache, there could be a race and cause the dst cache to be freed multiple times. So we fix l2tp side code to always call sk_dst_check() to garantee xchg() is called when refreshing sk->sk_dst_cache to avoid race conditions. Syzkaller reported stack trace: BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] BUG: KASAN: use-after-free in atomic_fetch_add_unless include/linux/atomic.h:575 [inline] BUG: KASAN: use-after-free in atomic_add_unless include/linux/atomic.h:597 [inline] BUG: KASAN: use-after-free in dst_hold_safe include/net/dst.h:308 [inline] BUG: KASAN: use-after-free in ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029 Read of size 4 at addr ffff8801aea9a880 by task syz-executor129/4829 CPU: 0 PID: 4829 Comm: syz-executor129 Not tainted 4.18.0-rc7-next-20180802+ #30 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x30d mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272 atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] atomic_fetch_add_unless include/linux/atomic.h:575 [inline] atomic_add_unless include/linux/atomic.h:597 [inline] dst_hold_safe include/net/dst.h:308 [inline] ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029 rt6_get_pcpu_route net/ipv6/route.c:1249 [inline] ip6_pol_route+0x354/0xd20 net/ipv6/route.c:1922 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2098 fib6_rule_lookup+0x283/0x890 net/ipv6/fib6_rules.c:122 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2126 ip6_dst_lookup_tail+0x1278/0x1da0 net/ipv6/ip6_output.c:978 ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1079 ip6_sk_dst_lookup_flow+0x5ed/0xc50 net/ipv6/ip6_output.c:1117 udpv6_sendmsg+0x2163/0x36b0 net/ipv6/udp.c:1354 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x51d/0x930 net/socket.c:2115 __sys_sendmmsg+0x240/0x6f0 net/socket.c:2210 __do_sys_sendmmsg net/socket.c:2239 [inline] __se_sys_sendmmsg net/socket.c:2236 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2236 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446a29 Code: e8 ac b8 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f4de5532db8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000006dcc38 RCX: 0000000000446a29 RDX: 00000000000000b8 RSI: 0000000020001b00 RDI: 0000000000000003 RBP: 00000000006dcc30 R08: 00007f4de5533700 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dcc3c R13: 00007ffe2b830fdf R14: 00007f4de55339c0 R15: 0000000000000001 Fixes: 71b1391a ("l2tp: ensure sk->dst is still valid") Reported-by: syzbot+05f840f3b04f211bad55@syzkaller.appspotmail.com Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: David Ahern <dsahern@gmail.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Virgile Jarry authored
Preventing the kernel from responding to ICMP Echo Requests messages can be useful in several ways. The sysctl parameter 'icmp_echo_ignore_all' can be used to prevent the kernel from responding to IPv4 ICMP echo requests. For IPv6 pings, such a sysctl kernel parameter did not exist. Add the ability to prevent the kernel from responding to IPv6 ICMP echo requests through the use of the following sysctl parameter : /proc/sys/net/ipv6/icmp/echo_ignore_all. Update the documentation to reflect this change. Signed-off-by:
Virgile Jarry <virgile@acceis.fr> Signed-off-by:
-
David S. Miller authored
Vakul Garg says: ==================== net/tls: Combined memory allocation for decryption request This patch does a combined memory allocation from heap for scatterlists, aead_request, aad and iv for the tls record decryption path. In present code, aead_request is allocated from heap, scatterlists on a conditional basis are allocated on heap or on stack. This is inefficient as it may requires multiple kmalloc/kfree. The initialization vector passed in cryption request is allocated on stack. This is a problem since the stack memory is not dma-able from crypto accelerators. Doing one combined memory allocation for each decryption request fixes both the above issues. It also paves a way to be able to submit multiple async decryption requests while the previous one is pending i.e. being processed or queued. ==================== Signed-off-by: -
Vakul Garg authored
For preparing decryption request, several memory chunks are required (aead_req, sgin, sgout, iv, aad). For submitting the decrypt request to an accelerator, it is required that the buffers which are read by the accelerator must be dma-able and not come from stack. The buffers for aad and iv can be separately kmalloced each, but it is inefficient. This patch does a combined allocation for preparing decryption request and then segments into aead_req || sgin || sgout || iv || aad. Signed-off-by:
Vakul Garg <vakul.garg@nxp.com> Signed-off-by:
-
Dan Carpenter authored
We're supposed to pass the number of elements in the mtk_recv_pkts, not the number of bytes. Fixes: 7237c4c9 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
- 12 Aug, 2018 5 commits
-
-
Daniel Borkmann authored
Andrey Ignatov says: ==================== This patch set adds new BPF helper bpf_skb_ancestor_cgroup_id that returns id of cgroup v2 that is ancestor of cgroup associated with the skb at the ancestor_level. The helper is useful to implement policies in TC based on cgroups that are upper in hierarchy than immediate cgroup associated with skb. v1->v2: - more reliable check for testing IPv6 to become ready in selftest. ==================== Signed-off-by:Daniel Borkmann <daniel@iogearbox.net>
-
Andrey Ignatov authored
Add selftests for bpf_skb_ancestor_cgroup_id helper. test_skb_cgroup_id.sh prepares testing interface and adds tc qdisc and filter for it using BPF object compiled from test_skb_cgroup_id_kern.c program. BPF program in test_skb_cgroup_id_kern.c gets ancestor cgroup id using the new helper at different levels of cgroup hierarchy that skb belongs to, including root level and non-existing level, and saves it to the map where the key is the level of corresponding cgroup and the value is its id. To trigger BPF program, user space program test_skb_cgroup_id_user is run. It adds itself into testing cgroup and sends UDP datagram to link-local multicast address of testing interface. Then it reads cgroup ids saved in kernel for different levels from the BPF map and compares them with those in user space. They must be equal for every level of ancestry. Example of run: # ./test_skb_cgroup_id.sh Wait for testing link-local IP to become available ... OK Note: 8 bytes struct bpf_elf_map fixup performed due to size mismatch! [PASS] Signed-off-by:
Andrey Ignatov <rdna@fb.com> Signed-off-by:
-
Andrey Ignatov authored
Add bpf_skb_cgroup_id and bpf_skb_ancestor_cgroup_id helpers to bpf_helpers.h to use them in tests and samples. Signed-off-by:
-
Andrey Ignatov authored
Sync skb_ancestor_cgroup_id() related bpf UAPI changes to tools/. Signed-off-by:
-
Andrey Ignatov authored
== Problem description == It's useful to be able to identify cgroup associated with skb in TC so that a policy can be applied to this skb, and existing bpf_skb_cgroup_id helper can help with this. Though in real life cgroup hierarchy and hierarchy to apply a policy to don't map 1:1. It's often the case that there is a container and corresponding cgroup, but there are many more sub-cgroups inside container, e.g. because it's delegated to containerized application to control resources for its subsystems, or to separate application inside container from infra that belongs to containerization system (e.g. sshd). At the same time it may be useful to apply a policy to container as a whole. If multiple containers like this are run on a host (what is often the case) and many of them have sub-cgroups, it may not be possible to apply per-container policy in TC with existing helpers such as bpf_skb_under_cgroup or bpf_skb_cgroup_id: * bpf_skb_cgroup_id will return id of immediate cgroup associated with skb, i.e. if it's a sub-cgroup inside container, it can't be used to identify container's cgroup; * bpf_skb_under_cgroup can work only with one cgroup and doesn't scale, i.e. if there are N containers on a host and a policy has to be applied to M of them (0 <= M <= N), it'd require M calls to bpf_skb_under_cgroup, and, if M changes, it'd require to rebuild & load new BPF program. == Solution == The patch introduces new helper bpf_skb_ancestor_cgroup_id that can be used to get id of cgroup v2 that is an ancestor of cgroup associated with skb at specified level of cgroup hierarchy. That way admin can place all containers on one level of cgroup hierarchy (what is a good practice in general and already used in many configurations) and identify specific cgroup on this level no matter what sub-cgroup skb is associated with. E.g. if there is a cgroup hierarchy: root/ root/container1/ root/container1/app11/ root/container1/app11/sub-app-a/ root/container1/app12/ root/container2/ root/container2/app21/ root/container2/app22/ root/container2/app22/sub-app-b/ , then having skb associated with root/container1/app11/sub-app-a/ it's possible to get ancestor at level 1, what is container1 and apply policy for this container, or apply another policy if it's container2. Policies can be kept e.g. in a hash map where key is a container cgroup id and value is an action. Levels where container cgroups are created are usually known in advance whether cgroup hierarchy inside container may be hard to predict especially in case when its creation is delegated to containerized application. == Implementation details == The helper gets ancestor by walking parents up to specified level. Another option would be to get different kind of "id" from cgroup->ancestor_ids[level] and use it with idr_find() to get struct cgroup for ancestor. But that would require radix lookup what doesn't seem to be better (at least it's not obviously better). Format of return value of the new helper is same as that of bpf_skb_cgroup_id. Signed-off-by:
-
