- 27 Aug, 2019 2 commits
-
-
Christophe Leroy authored
Book3E doesn't have SPRN_SPURR/SPRN_PURR. Activating ARCH_HAS_SCALED_CPUTIME is just wasting CPU time. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/linuxppc/issues/issues/171 Link: https://lore.kernel.org/r/a8b567c569aa521a7cf1beb061d43d79070e850c.1566492229.git.christophe.leroy@c-s.fr
-
Christopher M. Riedl authored
Add support for disabling the kernel implemented spectre v2 mitigation (count cache flush on context switch) via the nospectre_v2 and mitigations=off cmdline options. Suggested-by:
Christopher M. Riedl <cmr@informatik.wtf> Reviewed-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
- 26 Aug, 2019 2 commits
-
-
Gustavo Romero authored
TM test tm-unavailable must take into account aborts due to host aborting a transactin because of a facility unavailable exception, just like it already does for aborts on reschedules (TM_CAUSE_KVM_RESCHED). Reported-by:
Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Tested-by:
Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by:
-
Gustavo Romero authored
Currently TM signal context tests for GPR, FPR, VMX, and VSX registers print wrong register numbers (wrongly starting from register 0 instead of the first register in the non-volatile subset). Besides it the output when a mismatch happens is poor giving not much information about which context and which register mismatches, because it prints both contexts at the same time and not a comparison between the value that mismatches and the value expected and, moreover, it stops printing on the first mismatch, but it's important to know if there are other mismatches happening beyond the first one. For instance, this is the current output when a mismatch happens: test: tm_signal_context_chk_gpr tags: git_version:v5.2-8249-g02e970fae465-dirty Failed on 0 GPR 1 or 18446744073709551615 failure: tm_signal_context_chk_gpr test: tm_signal_context_chk_fpu tags: git_version:v5.2-8248-g09c289e3ef80 Failed on 0 FP -1 or -1 failure: tm_signal_context_chk_fpu test: tm_signal_context_chk_vmx tags: git_version:v5.2-8248-g09c289e3ef80 Failed on 0 vmx 0xfffffffffffffffefffffffdfffffffc vs 0xfffffffffffffffefffffffdfffffffc failure: tm_signal_context_chk_vmx test: tm_signal_context_chk_vsx tags: git_version:v5.2-8248-g09c289e3ef80 Failed on 0 vsx 0xfffffffffefffffffdfffffffcffffff vs 0xfffffffffefffffffdfffffffcffffff failure: tm_signal_context_chk_vsx This commit fixes the register numbers printed and enhances the error output by providing a full list of mismatching registers separated by the context (non-speculative or speculative context), for example: test: tm_signal_context_chk_gpr tags: git_version:v5.2-8249-g02e970fae465-dirty GPR14 (1st context) == 1 instead of -1 (expected) GPR15 (1st context) == 2 instead of -2 (expected) GPR14 (2nd context) == 0 instead of 18446744073709551615 (expected) GPR15 (2nd context) == 0 instead of 18446744073709551614 (expected) failure: tm_signal_context_chk_gpr test: tm_signal_context_chk_fpu tags: git_version:v5.2-8249-g02e970fae465-dirty FPR14 (1st context) == -1 instead of 1 (expected) FPR15 (1st context) == -2 instead of 2 (expected) failure: tm_signal_context_chk_fpu test: tm_signal_context_chk_vmx tags: git_version:v5.2-8249-g02e970fae465-dirty VMX20 (1st context) == 0xfffffffffffffffefffffffdfffffffc instead of 0x00000001000000020000000300000004 (expected) VMX21 (1st context) == 0xfffffffbfffffffafffffff9fffffff8 instead of 0x00000005000000060000000700000008 (expected) failure: tm_signal_context_chk_vmx test: tm_signal_context_chk_vsx tags: git_version:v5.2-8249-g02e970fae465-dirty VSX20 (1st context) == 0xfffffffffefffffffdfffffffcffffff instead of 0x00000001000000020000000300000004 (expected) VSX21 (1st context) == 0xfbfffffffafffffff9fffffff8ffffff instead of 0x00000005000000060000000700000008 (expected) failure: tm_signal_context_chk_vsx Finally, this commit adds comments to the tests in the hope that it will help people not so familiar with TM understand the tests. Signed-off-by:
Gustavo Romero <gromero@linux.ibm.com> Signed-off-by:
-
- 22 Aug, 2019 16 commits
-
-
Daniel Axtens authored
While reviewing lockdown patches, I discovered that we still enable /dev/port (CONFIG_DEVPORT) in skiroot. /dev/port is used for old x86 style IO accesses. It's set up in drivers/char/mem.c, and is only created if arch_has_dev_port() returns true. Per arch/powerpc/include/asm/io.h, on PPC64 with PCI, this is only true if there's a legacy ISA bridge. Even if a system has a legacy ISA bridge installed, we have no business accessing it in skiroot. Deselect CONFIG_DEVPORT for skiroot. Signed-off-by:
Daniel Axtens <dja@axtens.net> [mpe: Incorporate emailed comments into the change log] Signed-off-by:
-
Gustavo Romero authored
Currently some binary files which are generated when tests are compiled are not ignored by git, so 'git status' catch them. For copyloops test, fix wrong binary names already in .gitignore. For ptrace, security, and stringloops tests add missing binary names to the .gitignore file. Signed-off-by:
-
Gustavo Romero authored
Document all options currently supported by xmon debugger. Signed-off-by:
-
Sam Bobroff authored
Simplify some needlessly complicated boolean logic in eeh_add_to_parent_pe(). Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by:
-
Sam Bobroff authored
There are no users of the early-out return value from eeh_pe_dev_traverse(), so remove it. Signed-off-by:
-
Sam Bobroff authored
If a PCI device is removed during eeh_pe_report_edev(), between the calls to device_lock() and device_unlock(), edev->pdev will change and cause a crash as the wrong mutex is released. To correct this, hold the PCI rescan/remove lock while taking a copy of edev->pdev and performing a get_device() on it. Use this value to release the mutex, but also pass it through to the device driver's EEH handlers so that they always see the same device. Signed-off-by:
-
Sam Bobroff authored
Convert existing messages, where appropriate, to use the eeh_edev_* logging macros. The only effect should be minor adjustments to the log messages, apart from: - A new message in pseries_eeh_probe() "Probing device" to match the powernv case. - The "Probing device" message in pnv_eeh_probe() is now generated slightly later, which will mean that it is no longer emitted for devices that aren't probed due to the initial checks. Signed-off-by:
-
Sam Bobroff authored
Now that struct eeh_dev includes the BDFN of it's PCI device, make use of it to replace eeh_edev_info() with a set of dev_dbg()-style macros that only need a struct edev. With the BDFN available without the struct pci_dev, eeh_pci_name() is now unnecessary, so remove it. While only the "info" level function is used here, the others will be used in followup work. Signed-off-by:
-
Oliver O'Halloran authored
Preparation for removing pci_dn from the powernv EEH code. The only thing we really use pci_dn for is to get the bdfn of the device for config space accesses, so adding that information to eeh_dev reduces the need to carry around the pci_dn. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> [SB: Re-wrapped commit message, fixed whitespace damage.] Signed-off-by:
-
Sam Bobroff authored
Now that EEH support for all devices (on PowerNV and pSeries) is provided by the pcibios bus add device hooks, eeh_probe_devices() and eeh_addr_cache_build() are redundant and can be removed. Move the EEH enabled message into it's own function so that it can be called from multiple places. Note that previously on pSeries, useless EEH sysfs files were created for some devices that did not have EEH support and this change prevents them from being created. Signed-off-by:
-
Sam Bobroff authored
On PowerNV and pSeries, devices currently acquire EEH support from several different places: Boot-time devices from eeh_probe_devices() and eeh_addr_cache_build(), Virtual Function devices from the pcibios bus add device hooks and hot plugged devices from pci_hp_add_devices() (with other platforms using other methods as well). Unfortunately, pSeries machines currently discover hot plugged devices using pci_rescan_bus(), not pci_hp_add_devices(), and so those devices do not receive EEH support. Rather than adding another case for pci_rescan_bus(), this change widens the scope of the pcibios bus add device hooks so that they can handle all devices. As a side effect this also supports devices discovered after manually rescanning via /sys/bus/pci/rescan. Note that on PowerNV, this change allows the EEH subsystem to become enabled after boot as long as it has not been forced off, which was not previously possible (it was already possible on pSeries). Signed-off-by:
-
Sam Bobroff authored
The EEH address cache is currently initialized and populated by a single function: eeh_addr_cache_build(). While the initial population of the cache can only be done once resources are allocated, initialization (just setting up a spinlock) could be done much earlier. So move the initialization step into a separate function and call it from a core_initcall (rather than a subsys initcall). This will allow future work to make use of the cache during boot time PCI scanning. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Sam Bobroff authored
Also remove useless comment. Signed-off-by:
-
Sam Bobroff authored
The EEH_DEV_NO_HANDLER flag is used by the EEH system to prevent the use of driver callbacks in drivers that have been bound part way through the recovery process. This is necessary to prevent later stage handlers from being called when the earlier stage handlers haven't, which can be confusing for drivers. However, the flag is set for all devices that are added after boot time and only cleared at the end of the EEH recovery process. This results in hot plugged devices erroneously having the flag set during the first recovery after they are added (causing their driver's handlers to be incorrectly ignored). To remedy this, clear the flag at the beginning of recovery processing. The flag is still cleared at the end of recovery processing, although it is no longer really necessary. Also clear the flag during eeh_handle_special_event(), for the same reasons. Signed-off-by:
-
Sam Bobroff authored
The pcibios_init() function for PowerPC 64 currently calls pci_bus_add_devices() before pcibios_resource_survey(). This means that at boot time, when the pcibios_bus_add_device() hooks are called by pci_bus_add_devices(), device resources have not been allocated and they are unable to perform EEH setup, so a separate pass is needed. This patch adjusts that order so that it will become possible to consolidate the EEH setup work into a single location. The only functional change is to execute pcibios_resource_survey() (excepting ppc_md.pcibios_fixup(), see below) before pci_bus_add_devices() instead of after it. Because pcibios_scan_phb() and pci_bus_add_devices() are called together in a loop, this must be broken into one loop for each call. Then the call to pcibios_resource_survey() is moved up in between them. This changes the ordering but because pcibios_resource_survey() also calls ppc_md.pcibios_fixup(), that call is extracted out into pcibios_init() to where pcibios_resource_survey() was, so that it is not moved. The only other caller of pcibios_resource_survey() is the PowerPC 32 version of pcibios_init(), and therefore, that is modified to call ppc_md.pcibios_fixup() right after pcibios_resource_survey() so that there is no functional change there at all. The re-arrangement will cause very few side-effects because at this stage in the boot, pci_bus_add_devices() does very little: - pci_create_sysfs_dev_files() does nothing (no sysfs yet) - pci_proc_attach_device() does nothing (no proc yet) - device_attach() does nothing (no drivers yet) This leaves only the pci_final_fixup calls, D3 support, and marking the device as added. Of those, only the pci_final_fixup calls have the potential to be affected by resource allocation. The only pci_final_fixup handlers that touch resources seem to be one for x86 (pci_amd_enable_64bit_bar()), and a PowerPC 32 platform driver (quirk_final_uli1575()), neither of which use this pcibios_init() function. Even if they did, it would almost certainly be a bug, under the current ordering, to rely on or make changes to resources before they were allocated. Signed-off-by:
-
Masahiro Yamada authored
The KBUILD_ARFLAGS addition in arch/powerpc/Makefile has never worked in a useful way because it is always overridden by the following code in the top Makefile: # use the deterministic mode of AR if available KBUILD_ARFLAGS := $(call ar-option,D) The code in the top Makefile was added in 2011, by commit 40df759e ("kbuild: Fix build with binutils <= 2.19"). The KBUILD_ARFLAGS addition for ppc has always been dead code from the beginning. Nobody has reported a problem since 43c9127d ("powerpc: Add option to use thin archives"), so this code was unneeded. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
- 21 Aug, 2019 7 commits
-
-
Santosh Sivaraj authored
Use memcpy_mcsafe() implementation to define copy_to_user_mcsafe() Signed-off-by:
Santosh Sivaraj <santosh@fossix.org> Signed-off-by:
-
Balbir Singh authored
The pmem infrastructure uses memcpy_mcsafe in the pmem layer so as to convert machine check exceptions into a return value on failure in case a machine check exception is encountered during the memcpy. The return value is the number of bytes remaining to be copied. This patch largely borrows from the copyuser_power7 logic and does not add the VMX optimizations, largely to keep the patch simple. If needed those optimizations can be folded in. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> [arbab@linux.ibm.com: Added symbol export] Co-developed-by:
-
Balbir Singh authored
If we take a UE on one of the instructions with a fixup entry, set nip to continue execution at the fixup entry. Stop processing the event further or print it. Co-developed-by:
Reza Arbab <arbab@linux.ibm.com> Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Santosh Sivaraj authored
Certain architecture specific operating modes (e.g., in powerpc machine check handler that is unable to access vmalloc memory), the search_exception_tables cannot be called because it also searches the module exception tables if entry is not found in the kernel exception table. Signed-off-by:
-
Reza Arbab authored
The function doesn't get used outside this file, so make it static. Signed-off-by:
-
Balbir Singh authored
The current code would fail on huge pages addresses, since the shift would be incorrect. Use the correct page shift value returned by __find_linux_pte() to get the correct physical address. The code is more generic and can handle both regular and compound pages. Fixes: ba41e1e1 ("powerpc/mce: Hookup derror (load/store) UE errors") Signed-off-by:
-
Santosh Sivaraj authored
schedule_work() cannot be called from MCE exception context as MCE can interrupt even in interrupt disabled context. Fixes: 733e4a4c ("powerpc/mce: hookup memory_failure for UE errors") Cc: stable@vger.kernel.org # v4.15+ Reviewed-by:
-
- 20 Aug, 2019 13 commits
-
-
Nathan Lynch authored
After a partition migration, pseries_devicetree_update() processes changes to the device tree communicated from the platform to Linux. This is a relatively heavyweight operation, with multiple device tree searches, memory allocations, and conversations with partition firmware. There's a few levels of nested loops which are bounded only by decisions made by the platform, outside of Linux's control, and indeed we have seen RCU stalls on large systems while executing this call graph. Use cond_resched() in these loops so that the cpu is yielded when needed. Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
-
Nathan Lynch authored
rtas_cpu_state_change_mask() potentially operates on scores of cpus, so explicitly allow rescheduling in the loop body. Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Nathan Lynch authored
The LPAR migration implementation and userspace-initiated cpu hotplug can interleave their executions like so: 1. Set cpu 7 offline via sysfs. 2. Begin a partition migration, whose implementation requires the OS to ensure all present cpus are online; cpu 7 is onlined: rtas_ibm_suspend_me -> rtas_online_cpus_mask -> cpu_up This sets cpu 7 online in all respects except for the cpu's corresponding struct device; dev->offline remains true. 3. Set cpu 7 online via sysfs. _cpu_up() determines that cpu 7 is already online and returns success. The driver core (device_online) sets dev->offline = false. 4. The migration completes and restores cpu 7 to offline state: rtas_ibm_suspend_me -> rtas_offline_cpus_mask -> cpu_down This leaves cpu7 in a state where the driver core considers the cpu device online, but in all other respects it is offline and unused. Attempts to online the cpu via sysfs appear to succeed but the driver core actually does not pass the request to the lower-level cpuhp support code. This makes the cpu unusable until the cpu device is manually set offline and then online again via sysfs. Instead of directly calling cpu_up/cpu_down, the migration code should use the higher-level device core APIs to maintain consistent state and serialize operations. Fixes: 120496ac ("powerpc: Bring all threads online prior to migration/hibernation") Signed-off-by: -
Christophe Leroy authored
If a page is already mapped RW without the DIRTY flag, the DIRTY flag is never set and a TLB store miss exception is taken forever. This is easily reproduced with the following app: void main(void) { volatile char *ptr = mmap(0, 4096, PROT_READ | PROT_WRITE, MAP_SHARED | MAP_ANONYMOUS, -1, 0); *ptr = *ptr; } When DIRTY flag is not set, bail out of TLB miss handler and take a minor page fault which will set the DIRTY flag. Fixes: f8b58c64 ("powerpc/603: let's handle PAGE_DIRTY directly") Cc: stable@vger.kernel.org # v5.1+ Reported-by:Doug Crawford <doug.crawford@intelight-its.com> Signed-off-by:
-
Nicholas Piggin authored
pfn_pte is never given a pte above the addressable physical memory limit, so the masking is redundant. In case of a software bug, it is not obviously better to silently truncate the pfn than to corrupt the pte (either one will result in memory corruption or crashes), so there is no reason to add this to the fast path. Add VM_BUG_ON to catch cases where the pfn is invalid. These would catch the create_section_mapping bug fixed by a previous commit. [16885.256466] ------------[ cut here ]------------ [16885.256492] kernel BUG at arch/powerpc/include/asm/book3s/64/pgtable.h:612! cpu 0x0: Vector: 700 (Program Check) at [c0000000ee0a36d0] pc: c000000000080738: __map_kernel_page+0x248/0x6f0 lr: c000000000080ac0: __map_kernel_page+0x5d0/0x6f0 sp: c0000000ee0a3960 msr: 9000000000029033 current = 0xc0000000ec63b400 paca = 0xc0000000017f0000 irqmask: 0x03 irq_happened: 0x01 pid = 85, comm = sh kernel BUG at arch/powerpc/include/asm/book3s/64/pgtable.h:612! Linux version 5.3.0-rc1-00001-g0fe93e5f3394 enter ? for help [c0000000ee0a3a00] c000000000d37378 create_physical_mapping+0x260/0x360 [c0000000ee0a3b10] c000000000d370bc create_section_mapping+0x1c/0x3c [c0000000ee0a3b30] c000000000071f54 arch_add_memory+0x74/0x130 Signed-off-by:Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
Ensure __va is given a physical address below PAGE_OFFSET, and __pa is given a virtual address above PAGE_OFFSET. Signed-off-by:
-
Nicholas Piggin authored
The alloc_pages_node return value should be tested for failure before being passed to page_address. Tested-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
create_physical_mapping expects physical addresses, but splitting these mapping on hot unplug is supplying virtual (effective) addresses. Fixes: 4dd5f8a9 ("powerpc/mm/radix: Split linear mapping on hot-unplug") Signed-off-by:
-
Nicholas Piggin authored
create_physical_mapping expects physical addresses, but creating and splitting these mappings after boot is supplying virtual (effective) addresses. This can be irritated by booting with mem= to limit memory then probing an unused physical memory range: echo <addr> > /sys/devices/system/memory/probe This mostly works by accident, firstly because __va(__va(x)) == __va(x) so the virtual address does not get corrupted. Secondly because pfn_pte masks out the upper bits of the pfn beyond the physical address limit, so a pfn constructed with a 0xc000000000000000 virtual linear address will be masked back to the correct physical address in the pte. Fixes: 6cc27341 ("powerpc/mm: add radix__create_section_mapping()") Signed-off-by:
-
Nicholas Piggin authored
current may be cached by the compiler, so remove the volatile asm restriction. This results in better generated code, as well as being smaller and fewer dependent loads, it can avoid store-hit-load flushes like this one that shows up in irq_exit(): preempt_count_sub(HARDIRQ_OFFSET); if (!in_interrupt() && ...) Which ends up as: ((struct thread_info *)current)->preempt_count -= HARDIRQ_OFFSET; if (((struct thread_info *)current)->preempt_count ... Evaluating current twice presently means it has to be loaded twice, and here gcc happens to pick a different register each time, then preempt_count is accessed via that base register: 1058: ld r10,2392(r13) <-- current 105c: lwz r9,0(r10) <-- preempt_count 1060: addis r9,r9,-1 1064: stw r9,0(r10) <-- preempt_count 1068: ld r9,2392(r13) <-- current 106c: lwz r9,0(r9) <-- preempt_count 1070: rlwinm. r9,r9,0,11,23 1074: bne 1090 <irq_exit+0x60> This can frustrate store-hit-load detection heuristics and cause flushes. Allowing the compiler to cache current in a reigster with this patch results in the same base register being used for all accesses, which is more likely to be detected as an alias: 1058: ld r31,2392(r13) ... 1070: lwz r9,0(r31) 1074: addis r9,r9,-1 1078: stw r9,0(r31) 107c: lwz r9,0(r31) 1080: rlwinm. r9,r9,0,11,23 1084: bne 10a0 <irq_exit+0x60> Signed-off-by: -
Christophe Leroy authored
copy_page() and clear_page() expect page aligned destination, and use dcbz instruction to clear entire cache lines based on the assumption that the destination is cache aligned. As shown during analysis of a bug in BTRFS filesystem, a misaligned copy_page() can create bugs that are difficult to locate (see Link). Add an explicit WARNING when copy_page() or clear_page() are called with misaligned destination. Signed-off-by:
-
Christophe Leroy authored
On powerpc 603, there is no hash table so get out of update_mmu_cache() early. Signed-off-by:
-
Christophe Leroy authored
On BOOK3S32, hash_preload() neither use is_exec nor trap, so drop those parameters and simplify update_mmu_cached(). Signed-off-by:
-
