- 12 Apr, 2017 28 commits
-
-
Gleb Fotengauer-Malinovskiy authored
commit 7292ae3d upstream. The latest change of asm goto support check added passing of KBUILD_CFLAGS to compiler. When these flags reference gcc plugins that are not built yet, the check fails. When one runs "make bzImage" followed by "make modules", the kernel is always built with HAVE_JUMP_LABEL disabled, while the modules are built depending on CONFIG_JUMP_LABEL. If HAVE_JUMP_LABEL macro happens to be different, modules are built with undefined references, e.g.: ERROR: "static_key_slow_inc" [net/netfilter/xt_TEE.ko] undefined! ERROR: "static_key_slow_dec" [net/netfilter/xt_TEE.ko] undefined! ERROR: "static_key_slow_dec" [net/netfilter/nft_meta.ko] undefined! ERROR: "static_key_slow_inc" [net/netfilter/nft_meta.ko] undefined! ERROR: "nf_hooks_needed" [net/netfilter/ipvs/ip_vs.ko] undefined! ERROR: "nf_hooks_needed" [net/ipv6/ipv6.ko] undefined! ERROR: "static_key_count" [net/ipv6/ipv6.ko] undefined! ERROR: "static_key_slow_inc" [net/ipv6/ipv6.ko] undefined! This change moves the check before all these references are added to KBUILD_CFLAGS. This is correct because subsequent KBUILD_CFLAGS modifications are not relevant to this check. Reported-by:
Anton V. Boyarshinov <boyarsh@altlinux.org> Fixes: 35f860f9 ("jump label: pass kbuild_cflags when checking for asm goto support") Signed-off-by:
Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by:
David Lin <dtwlin@google.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit b334e19a upstream. In commit a76bcf55 ("Kbuild: enable -Wmaybe-uninitialized warning for "make W=1""), I reverted another change that happened to fix a problem with old compilers, and now we get this report again with old compilers (prior to gcc-4.8) and GCOV enabled: cc1: warnings being treated as errors drivers/gpu/drm/i915/intel_ringbuffer.c: In function 'intel_ring_setup_status_page': drivers/gpu/drm/i915/intel_ringbuffer.c:438: error: 'mmio.reg' may be used uninitialized in this function At top level: >> cc1: error: unrecognized command line option "-Wno-maybe-uninitialized" The problem is that we turn off the warning conditionally in a number of places as we should, but one of them does it unconditionally. Instead, change it to call cc-disable-warning as we do elsewhere. The original patch that caused it was merged into linux-4.7, then 4.8 removed the change and 4.9 brought it back, so we probably want a backport to 4.9 once this is merged. Use a ':=' assignment instead of '=' to force the cc-disable-warning call to only be evaluated once instead of every time. Fixes: a76bcf55 ("Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"") Fixes: e72e2dfe ("gcov: disable -Wmaybe-uninitialized warning") Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Rafael J. Wysocki authored
commit fdad4e7a upstream. Commit c2a6bbaf (ACPI / scan: Prefer devices without _HID/_CID for _ADR matching) added a list_empty(&adev->pnp.ids) check to find_child_checks() so as to catch situations in which the ACPI core attempts to decode _ADR for a device having a _HID too which is strictly against the spec. However, it overlooked the fact that the adev->pnp.ids list for the devices taken into account by find_child_checks() may contain device IDs set internally by the kernel, like "LNXVIDEO" (thanks to Zhang Rui for that realization), and it broke the enumeration of those devices as a result. To unbreak it, replace the overly coarse grained list_empty() check with a much more precise check against the pnp.type.platform_id flag which is only set for devices having a _HID (that's how it should be done from the start, as having both _ADR and _CID is actually permitted). Fixes: c2a6bbaf (ACPI / scan: Prefer devices without _HID/_CID for _ADR matching) Link: https://bugzilla.kernel.org/show_bug.cgi?id=194889Reported-and-tested-by:
Mike <mike@mikewilson.me.uk> Tested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 693bdaa1 upstream. If, while locating GPIOs by name, we get probe deferral, we should immediately report it to caller rather than trying to fall back to parsing unnamed GPIOs from _CRS block. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-and-Tested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Sami Tolvanen authored
commit 86e3e83b upstream. Buffers read through dm_bufio_read() were not released in all code paths. Fixes: a739ff3f ("dm verity: add support for forward error correction") Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Sami Tolvanen authored
commit f1a880a9 upstream. If the hash tree itself is sufficiently corrupt in addition to data blocks, it's possible for error correction to end up in a deep recursive loop, which eventually causes a kernel panic. This change limits the recursion to a reasonable level during a single I/O operation. Fixes: a739ff3f ("dm verity: add support for forward error correction") Signed-off-by:
-
Ross Zwisler authored
commit e11f8b7b upstream. While running generic/340 in my test setup I hit the following race. It can happen with kernels that support FS DAX PMDs, so v4.10 thru v4.11-rc5. Thread 1 Thread 2 -------- -------- dax_iomap_pmd_fault() grab_mapping_entry() spin_lock_irq() get_unlocked_mapping_entry() 'entry' is NULL, can't call lock_slot() spin_unlock_irq() radix_tree_preload() dax_iomap_pmd_fault() grab_mapping_entry() spin_lock_irq() get_unlocked_mapping_entry() ... lock_slot() spin_unlock_irq() dax_pmd_insert_mapping() <inserts a PMD mapping> spin_lock_irq() __radix_tree_insert() fails with -EEXIST <fall back to 4k fault, and die horribly when inserting a 4k entry where a PMD exists> The issue is that we have to drop mapping->tree_lock while calling radix_tree_preload(), but since we didn't have a radix tree entry to lock (unlike in the pmd_downgrade case) we have no protection against Thread 2 coming along and inserting a PMD at the same index. For 4k entries we handled this with a special-case response to -EEXIST coming from the __radix_tree_insert(), but this doesn't save us for PMDs because the -EEXIST case can also mean that we collided with a 4k entry in the radix tree at a different index, but one that is covered by our PMD range. So, correctly handle both the 4k and 2M collision cases by explicitly re-checking the radix tree for an entry at our index once we reacquire mapping->tree_lock. This patch has made it through a clean xfstests run with the current v4.11-rc5 based linux/master, and it also ran generic/340 500 times in a loop. It used to fail within the first 10 iterations. Link: http://lkml.kernel.org/r/20170406212944.2866-1-ross.zwisler@linux.intel.comSigned-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
bsegall@google.com authored
commit 5402e97a upstream. In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against __TASK_TRACED. If this races with the ptrace_unfreeze_traced at the end of a PTRACE_LISTEN, this can wake the task /after/ the check against __TASK_TRACED, but before the reset of state to TASK_TRACED. This causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup against TRACED while the task is still on the rq wake_list, corrupting it. Oleg said: "The kernel can crash or this can lead to other hard-to-debug problems. In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced() assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the contract. Obviusly it is very wrong to manipulate task->state if this task is already running, or WAKING, or it sleeps again" [akpm@linux-foundation.org: coding-style fixes] Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL") Link: http://lkml.kernel.org/r/xm26y3vfhmkp.fsf_-_@bsegall-linux.mtv.corp.google.comSigned-off-by:
Ben Segall <bsegall@google.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Alexander Polakov authored
commit 1f06b81a upstream. Fixes: 11fb9989 ("mm: move most file-based accounting to the node") Link: http://lkml.kernel.org/r/1490377730.30219.2.camel@beget.ruSigned-off-by:
Alexander Polyakov <apolyakov@beget.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Jan-Marek Glogowski authored
commit 806a28ef upstream. Currently the cifs module breaks the CIFS specs on reconnect as described in http://msdn.microsoft.com/en-us/library/cc246529.aspx: "TreeId (4 bytes): Uniquely identifies the tree connect for the command. This MUST be 0 for the SMB2 TREE_CONNECT Request." Signed-off-by:
Jan-Marek Glogowski <glogow@fbihome.de> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Tested-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Arend Van Spriel authored
commit b3ef5520 upstream. We got the following use-after-free KASAN report: BUG: KASAN: use-after-free in wiphy_resume+0x591/0x5a0 [cfg80211] at addr ffff8803fc244090 Read of size 8 by task kworker/u16:24/2587 CPU: 6 PID: 2587 Comm: kworker/u16:24 Tainted: G B 4.9.13-debug+ Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 1.2.19 12/22/2016 Workqueue: events_unbound async_run_entry_fn ffff880425d4f9d8 ffffffffaeedb541 ffff88042b80ef00 ffff8803fc244088 ffff880425d4fa00 ffffffffae84d7a1 ffff880425d4fa98 ffff8803fc244080 ffff88042b80ef00 ffff880425d4fa88 ffffffffae84da3a ffffffffc141f7d9 Call Trace: [<ffffffffaeedb541>] dump_stack+0x85/0xc4 [<ffffffffae84d7a1>] kasan_object_err+0x21/0x70 [<ffffffffae84da3a>] kasan_report_error+0x1fa/0x500 [<ffffffffc141f7d9>] ? cfg80211_bss_age+0x39/0xc0 [cfg80211] [<ffffffffc141f83a>] ? cfg80211_bss_age+0x9a/0xc0 [cfg80211] [<ffffffffae48d46d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffc13fb1c0>] ? wiphy_suspend+0xc70/0xc70 [cfg80211] [<ffffffffae84def1>] __asan_report_load8_noabort+0x61/0x70 [<ffffffffc13fb100>] ? wiphy_suspend+0xbb0/0xc70 [cfg80211] [<ffffffffc13fb751>] ? wiphy_resume+0x591/0x5a0 [cfg80211] [<ffffffffc13fb751>] wiphy_resume+0x591/0x5a0 [cfg80211] [<ffffffffc13fb1c0>] ? wiphy_suspend+0xc70/0xc70 [cfg80211] [<ffffffffaf3b206e>] dpm_run_callback+0x6e/0x4f0 [<ffffffffaf3b31b2>] device_resume+0x1c2/0x670 [<ffffffffaf3b367d>] async_resume+0x1d/0x50 [<ffffffffae3ee84e>] async_run_entry_fn+0xfe/0x610 [<ffffffffae3d0666>] process_one_work+0x716/0x1a50 [<ffffffffae3d05c9>] ? process_one_work+0x679/0x1a50 [<ffffffffafdd7b6d>] ? _raw_spin_unlock_irq+0x3d/0x60 [<ffffffffae3cff50>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0 [<ffffffffae3d1a80>] worker_thread+0xe0/0x1460 [<ffffffffae3d19a0>] ? process_one_work+0x1a50/0x1a50 [<ffffffffae3e54c2>] kthread+0x222/0x2e0 [<ffffffffae3e52a0>] ? kthread_park+0x80/0x80 [<ffffffffae3e52a0>] ? kthread_park+0x80/0x80 [<ffffffffae3e52a0>] ? kthread_park+0x80/0x80 [<ffffffffafdd86aa>] ret_from_fork+0x2a/0x40 Object at ffff8803fc244088, in cache kmalloc-1024 size: 1024 Allocated: PID = 71 save_stack_trace+0x1b/0x20 save_stack+0x46/0xd0 kasan_kmalloc+0xad/0xe0 kasan_slab_alloc+0x12/0x20 __kmalloc_track_caller+0x134/0x360 kmemdup+0x20/0x50 brcmf_cfg80211_attach+0x10b/0x3a90 [brcmfmac] brcmf_bus_start+0x19a/0x9a0 [brcmfmac] brcmf_pcie_setup+0x1f1a/0x3680 [brcmfmac] brcmf_fw_request_nvram_done+0x44c/0x11b0 [brcmfmac] request_firmware_work_func+0x135/0x280 process_one_work+0x716/0x1a50 worker_thread+0xe0/0x1460 kthread+0x222/0x2e0 ret_from_fork+0x2a/0x40 Freed: PID = 2568 save_stack_trace+0x1b/0x20 save_stack+0x46/0xd0 kasan_slab_free+0x71/0xb0 kfree+0xe8/0x2e0 brcmf_cfg80211_detach+0x62/0xf0 [brcmfmac] brcmf_detach+0x14a/0x2b0 [brcmfmac] brcmf_pcie_remove+0x140/0x5d0 [brcmfmac] brcmf_pcie_pm_leave_D3+0x198/0x2e0 [brcmfmac] pci_pm_resume+0x186/0x220 dpm_run_callback+0x6e/0x4f0 device_resume+0x1c2/0x670 async_resume+0x1d/0x50 async_run_entry_fn+0xfe/0x610 process_one_work+0x716/0x1a50 worker_thread+0xe0/0x1460 kthread+0x222/0x2e0 ret_from_fork+0x2a/0x40 Memory state around the buggy address: ffff8803fc243f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8803fc244000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8803fc244080: fc fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8803fc244100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8803fc244180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb What is happening is that brcmf_pcie_resume() detects a device that is no longer responsive and it decides to unbind resulting in a wiphy_unregister() and wiphy_free() call. Now the wiphy instance remains allocated, because PM needs to call wiphy_resume() for it. However, brcmfmac already does a kfree() for the struct cfg80211_registered_device::ops field. Change the checks in wiphy_resume() to only access the struct cfg80211_registered_device::ops if the wiphy instance is still registered at this time. Reported-by:
Daniel J Blueman <daniel@quora.org> Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Victor Kamensky authored
commit 09a6adf5 upstream. After 52d7523d (arm64: mm: allow the kernel to handle alignment faults on user accesses) commit user-land accesses that produce unaligned exceptions like in case of aarch32 ldm/stm/ldrd/strd instructions operating on unaligned memory received by user-land as SIGSEGV. It is wrong, it should be reported as SIGBUS as it was before 52d7523d commit. Changed do_bad_area function to take signal and code parameters out of esr value using fault_info table, so in case of do_alignment_fault fault user-land will receive SIGBUS. Wrapped access to fault_info table into esr_to_fault_info function. Fixes: 52d7523d (arm64: mm: allow the kernel to handle alignment faults on user accesses) Signed-off-by:
Victor Kamensky <kamensky@cisco.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Quentin Schulz authored
commit 4bdc9029 upstream. The gyroscope chip might need to be reset to be used. Without the chip being reset, the driver stopped at the first regmap_read (to get the CHIP_ID) and failed to probe. The datasheet of the gyroscope says that a minimum wait of 30ms after the reset has to be done. This patch has been checked on a BMX055 and the datasheet of the BMG160 and the BMI055 give the same reset register and bits. Signed-off-by:
Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Shrirang Bagul authored
commit 51f528a1 upstream. This patch initializes the bootime in struct st_sensor_settings for lps22hb sensor. Without this, sensor channels read from sysfs always report stale values. Signed-off-by:
Shrirang Bagul <shrirang.bagul@canonical.com> Signed-off-by:
-
Nikolaus Schulz authored
commit 7fd6592d upstream. Fix formatting of negative values of type IIO_VAL_FRACTIONAL_LOG2 by switching from do_div(), which can't handle negative numbers, to div_s64_rem(). Also use shift_right for shifting, which is safe with negative values. Signed-off-by:
Nikolaus Schulz <nikolaus.schulz@avionic-design.de> Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Suzuki K Poulose authored
commit 8b3405e3 upstream. In kvm_free_stage2_pgd() we don't hold the kvm->mmu_lock while calling unmap_stage2_range() on the entire memory range for the guest. This could cause problems with other callers (e.g, munmap on a memslot) trying to unmap a range. And since we have to unmap the entire Guest memory range holding a spinlock, make sure we yield the lock if necessary, after we unmap each PUD range. Fixes: commit d5d8184d ("KVM: ARM: Memory virtualization setup") Cc: Paolo Bonzini <pbonzin@redhat.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> [ Avoid vCPU starvation and lockup detector warnings ] Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
-
Marc Zyngier authored
commit 72f31048 upstream. We don't hold the mmap_sem while searching for VMAs (via find_vma), in kvm_arch_prepare_memory_region, which can end up in expected failures. Fixes: commit 8eef9123 ("arm/arm64: KVM: map MMIO regions at creation time") Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Eric Auger <eric.auger@rehat.com> Reviewed-by:
-
Marc Zyngier authored
commit 90f6e150 upstream. We don't hold the mmap_sem while searching for the VMAs when we try to unmap each memslot for a VM. Fix this properly to avoid unexpected results. Fixes: commit 957db105 ("arm/arm64: KVM: Introduce stage2_unmap_vm") Reviewed-by:
-
Shuxiao Zhang authored
commit 97fbfef6 upstream. vfs_llseek will check whether the file mode has FMODE_LSEEK, no return failure. But ashmem can be lseek, so add FMODE_LSEEK to ashmem file. Comment From Greg Hackmann: ashmem_llseek() passes the llseek() call through to the backing shmem file. 91360b02 ("ashmem: use vfs_llseek()") changed this from directly calling the file's llseek() op into a VFS layer call. This also adds a check for the FMODE_LSEEK bit, so without that bit ashmem_llseek() now always fails with -ESPIPE. Fixes: 91360b02 ("ashmem: use vfs_llseek()") Signed-off-by:
Shuxiao Zhang <zhangshuxiao@xiaomi.com> Tested-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
-
NeilBrown authored
commit c8a139d0 upstream. ops->show() can return a negative error code. Commit 65da3484 ("sysfs: correctly handle short reads on PREALLOC attrs.") (in v4.4) caused this to be stored in an unsigned 'size_t' variable, so errors would look like large numbers. As a result, if an error is returned, sysfs_kf_read() will return the value of 'count', typically 4096. Commit 17d0774f ("sysfs: correctly handle read offset on PREALLOC attrs") (in v4.8) extended this error to use the unsigned large 'len' as a size for memmove(). Consequently, if ->show returns an error, then the first read() on the sysfs file will return 4096 and could return uninitialized memory to user-space. If the application performs a subsequent read, this will trigger a memmove() with extremely large count, and is likely to crash the machine is bizarre ways. This bug can currently only be triggered by reading from an md sysfs attribute declared with __ATTR_PREALLOC() during the brief period between when mddev_put() deletes an mddev from the ->all_mddevs list, and when mddev_delayed_delete() - which is scheduled on a workqueue - completes. Before this, an error won't be returned by the ->show() After this, the ->show() won't be called. I can reproduce it reliably only by putting delay like usleep_range(500000,700000); early in mddev_delayed_delete(). Then after creating an md device md0 run echo clear > /sys/block/md0/md/array_state; cat /sys/block/md0/md/array_state The bug can be triggered without the usleep. Fixes: 65da3484 ("sysfs: correctly handle short reads on PREALLOC attrs.") Fixes: 17d0774f ("sysfs: correctly handle read offset on PREALLOC attrs") Signed-off-by:
NeilBrown <neilb@suse.com> Acked-by:
Tejun Heo <tj@kernel.org> Reported-and-tested-by:
Miroslav Benes <mbenes@suse.cz> Signed-off-by:
-
Tomasz Nowicki authored
commit feb199eb upstream. SZ_16M PEM resource size includes PEM-specific register and its children resources. Reservation of the whole SZ_16M range leads to child device driver failure when pcieport driver is requesting resources: pcieport 0004:1f:00.0: can't enable device: BAR 0 [mem 0x87e0c0f00000-0x87e0c0ffffff 64bit] not claimed So we cannot reserve full 16M here and instead we want to reserve PEM-specific register only which is SZ_64K. At the end increase PEM resource to SZ_16M since this is what thunder_pem_init() call expects for proper initialization. Fixes: 9abb27c7 ("PCI: thunder-pem: Add legacy firmware support for Cavium ThunderX host controller") Signed-off-by:
Tomasz Nowicki <tn@semihalf.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Tomasz Nowicki authored
commit 9abb27c7 upstream. During early days of PCI quirks support, ThunderX firmware did not provide PNP0c02 node with PCI configuration space and PEM-specific register ranges. This means that for legacy FW we are not reserving these resources and cannot gather PEM-specific resources for further PEM initialization. To support already deployed legacy FW, calculate PEM-specific ranges and provide resources reservation as fallback scenario into PEM driver when we could not gather PEM reg base from ACPI tables. Tested-by:
Robert Richter <rrichter@cavium.com> Signed-off-by:
Vadim Lomovtsev <Vadim.Lomovtsev@caviumnetworks.com> Signed-off-by:
-
Li Qiang authored
commit e7e11f99 upstream. In vmw_surface_define_ioctl(), the 'num_sizes' is the sum of the 'req->mip_levels' array. This array can be assigned any value from the user space. As both the 'num_sizes' and the array is uint32_t, it is easy to make 'num_sizes' overflow. The later 'mip_levels' is used as the loop count. This can lead an oob write. Add the check of 'req->mip_levels' to avoid this. Signed-off-by:
Li Qiang <liqiang6-s@360.cn> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 53e16798 upstream. The mesa winsys sometimes uses unimplemented parameter requests to check for features. Remove the error message to avoid bloating the kernel log. Signed-off-by:
Brian Paul <brianp@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit fe25deb7 upstream. Previously, when a surface was opened using a legacy (non prime) handle, it was verified to have been created by a client in the same master realm. Relax this so that opening is also allowed recursively if the client already has the surface open. This works around a regression in svga mesa where opening of a shared surface is used recursively to obtain surface information. Signed-off-by:
-
Murray McAllister authored
commit 63774069 upstream. In vmw_get_cap_3d_ioctl(), a user can supply 0 for a size that is used in vzalloc(). This eventually calls dump_stack() (in warn_alloc()), which can leak useful addresses to dmesg. Add check to avoid a size of 0. Signed-off-by:
Murray McAllister <murray.mcallister@insomniasec.com> Reviewed-by:
-
Murray McAllister authored
commit 36274ab8 upstream. Before memory allocations vmw_surface_define_ioctl() checks the upper-bounds of a user-supplied size, but does not check if the supplied size is 0. Add check to avoid NULL pointer dereferences. Signed-off-by:
-
Thomas Hellstrom authored
commit f7652afa upstream. A malicious caller could otherwise hand over handles to other objects causing all sorts of interesting problems. Testing done: Ran a Fedora 25 desktop using both Xorg and gnome-shell/Wayland. Signed-off-by:
-
- 08 Apr, 2017 12 commits
-
-
Greg Kroah-Hartman authored
-
Zhi Wang authored
commit 3e52d71e upstream. This patch makes PPGTT page table non-shrinkable when using aliasing PPGTT mode. It's just a temporary solution for making GVT-g work. Fixes: 2ce5179f ("drm/i915/gtt: Free unused lower-level page tables") Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhiyuan Lv <zhiyuan.lv@intel.com> Signed-off-by:
Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486559013-25251-2-git-send-email-zhi.a.wang@intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Zhi Wang authored
commit 26d12c61 upstream. execlist_update_context() will try to update PDPs in a context before a ELSP submission only for full PPGTT mode, while PDPs was populated during context initialization. Now the latter code path is removed. Let execlist_update_context() also cover !FULL_PPGTT mode. Fixes: 34869776 ("drm/i915: check ppgtt validity when init reg state") Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhiyuan Lv <zhiyuan.lv@intel.com> Signed-off-by:
-
Zhi Wang authored
commit a18dbba8 upstream. a PT page will be released if it doesn't contain any meaningful mappings during PPGTT page table shrinking. The PT entry in the upper level will be set to a scratch entry. Normally this works nicely, but in virtualization world, the PPGTT page table is tracked by hypervisor. Releasing the PT page before modifying the upper level PT entry would cause extra efforts. As the tracked page has been returned to OS before losing track from hypervisor, it could be written in any pattern. Hypervisor has to recognize if a page is still being used as a PT page by validating these writing patterns. It's complicated. Better let the guest modify the PT entry in upper level PT first, then release the PT page. Reviewed-by:
Michał Winiarski <michal.winiarski@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhiyuan Lv <zhiyuan.lv@intel.com> Signed-off-by:
-
Keith Busch authored
commit 6db28eda upstream. If the device is not present, the driver should disable the queues immediately. Prior to this, the driver was relying on the watchdog timer to kill the queues if requests were outstanding to the device, and that just delays removal up to one second. Signed-off-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Keith Busch authored
commit f33447b9 upstream. If a namespace has already been marked dead, we don't want to kick the request_queue again since we may have just freed it from another thread. Signed-off-by:
-
Jason A. Donenfeld authored
commit de5540d0 upstream. Under extremely heavy uses of padata, crashes occur, and with list debugging turned on, this happens instead: [87487.298728] WARNING: CPU: 1 PID: 882 at lib/list_debug.c:33 __list_add+0xae/0x130 [87487.301868] list_add corruption. prev->next should be next (ffffb17abfc043d0), but was ffff8dba70872c80. (prev=ffff8dba70872b00). [87487.339011] [<ffffffff9a53d075>] dump_stack+0x68/0xa3 [87487.342198] [<ffffffff99e119a1>] ? console_unlock+0x281/0x6d0 [87487.345364] [<ffffffff99d6b91f>] __warn+0xff/0x140 [87487.348513] [<ffffffff99d6b9aa>] warn_slowpath_fmt+0x4a/0x50 [87487.351659] [<ffffffff9a58b5de>] __list_add+0xae/0x130 [87487.354772] [<ffffffff9add5094>] ? _raw_spin_lock+0x64/0x70 [87487.357915] [<ffffffff99eefd66>] padata_reorder+0x1e6/0x420 [87487.361084] [<ffffffff99ef0055>] padata_do_serial+0xa5/0x120 padata_reorder calls list_add_tail with the list to which its adding locked, which seems correct: spin_lock(&squeue->serial.lock); list_add_tail(&padata->list, &squeue->serial.list); spin_unlock(&squeue->serial.lock); This therefore leaves only place where such inconsistency could occur: if padata->list is added at the same time on two different threads. This pdata pointer comes from the function call to padata_get_next(pd), which has in it the following block: next_queue = per_cpu_ptr(pd->pqueue, cpu); padata = NULL; reorder = &next_queue->reorder; if (!list_empty(&reorder->list)) { padata = list_entry(reorder->list.next, struct padata_priv, list); spin_lock(&reorder->lock); list_del_init(&padata->list); atomic_dec(&pd->reorder_objects); spin_unlock(&reorder->lock); pd->processed++; goto out; } out: return padata; I strongly suspect that the problem here is that two threads can race on reorder list. Even though the deletion is locked, call to list_entry is not locked, which means it's feasible that two threads pick up the same padata object and subsequently call list_add_tail on them at the same time. The fix is thus be hoist that lock outside of that block. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Acked-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
NeilBrown authored
commit f5fe1b51 upstream. Commit 79bd9959 ("blk: improve order of bio handling in generic_make_request()") changed current->bio_list so that it did not contain *all* of the queued bios, but only those submitted by the currently running make_request_fn. There are two places which walk the list and requeue selected bios, and others that check if the list is empty. These are no longer correct. So redefine current->bio_list to point to an array of two lists, which contain all queued bios, and adjust various code to test or walk both lists. Signed-off-by:
-
NeilBrown authored
commit 79bd9959 upstream. To avoid recursion on the kernel stack when stacked block devices are in use, generic_make_request() will, when called recursively, queue new requests for later handling. They will be handled when the make_request_fn for the current bio completes. If any bios are submitted by a make_request_fn, these will ultimately be handled seqeuntially. If the handling of one of those generates further requests, they will be added to the end of the queue. This strict first-in-first-out behaviour can lead to deadlocks in various ways, normally because a request might need to wait for a previous request to the same device to complete. This can happen when they share a mempool, and can happen due to interdependencies particular to the device. Both md and dm have examples where this happens. These deadlocks can be erradicated by more selective ordering of bios. Specifically by handling them in depth-first order. That is: when the handling of one bio generates one or more further bios, they are handled immediately after the parent, before any siblings of the parent. That way, when generic_make_request() calls make_request_fn for some particular device, we can be certain that all previously submited requests for that device have been completely handled and are not waiting for anything in the queue of requests maintained in generic_make_request(). An easy way to achieve this would be to use a last-in-first-out stack instead of a queue. However this will change the order of consecutive bios submitted by a make_request_fn, which could have unexpected consequences. Instead we take a slightly more complex approach. A fresh queue is created for each call to a make_request_fn. After it completes, any bios for a different device are placed on the front of the main queue, followed by any bios for the same device, followed by all bios that were already on the queue before the make_request_fn was called. This provides the depth-first approach without reordering bios on the same level. This, by itself, it not enough to remove all deadlocks. It just makes it possible for drivers to take the extra step required themselves. To avoid deadlocks, drivers must never risk waiting for a request after submitting one to generic_make_request. This includes never allocing from a mempool twice in the one call to a make_request_fn. A common pattern in drivers is to call bio_split() in a loop, handling the first part and then looping around to possibly split the next part. Instead, a driver that finds it needs to split a bio should queue (with generic_make_request) the second part, handle the first part, and then return. The new code in generic_make_request will ensure the requests to underlying bios are processed first, then the second bio that was split off. If it splits again, the same process happens. In each case one bio will be completely handled before the next one is attempted. With this is place, it should be possible to disable the punt_bios_to_recover() recovery thread for many block devices, and eventually it may be possible to remove it completely. Ref: http://www.spinics.net/lists/raid/msg54680.htmlTested-by:
Jinpu Wang <jinpu.wang@profitbricks.com> Inspired-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
-
Felix Fietkau authored
commit 6c356eda upstream. With the IRQ stack changes integrated, the XRX200 devices started emitting a constant stream of kernel messages like this: [ 565.415310] Spurious IRQ: CAUSE=0x1100c300 This is caused by IP0 getting handled by plat_irq_dispatch() rather than its vectored interrupt handler, which is fixed by commit de856416e714 ("MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch"). Fix plat_irq_dispatch() to handle non-vectored IPI interrupts correctly by setting up IP2-6 as proper chained IRQ handlers and calling do_IRQ for all MIPS CPU interrupts. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Acked-by:
John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15077/ [james.hogan@imgtec.com: tweaked commit message] Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Jon Mason authored
commit 0c2bf9f9 upstream. GIC_PPI flags were misconfigured for the timers, resulting in errors like: [ 0.000000] GIC: PPI11 is secure or misconfigured Changing them to being edge triggered corrects the issue Suggested-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Jon Mason <jon.mason@broadcom.com> Fixes: d27509f1 ("ARM: BCM5301X: add dts files for BCM4708 SoC") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Daniel Vetter authored
commit 7357f899 upstream. I reported the include issue for tracepoints a while ago, but nothing seems to have happened. Now it bit us, since the drm_mm_print conversion was broken for armada. Fix it, so I can re-enable armada in the drm-misc build configs. v2: Rebase just the compile fix on top of Chris' build fix. Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483115932-19584-1-git-send-email-daniel.vetter@ffwll.chSigned-off-by:
-
