- 27 Mar, 2020 2 commits
-
-
Chaitanya Kulkarni authored
This patch adds two new tracpoints for null_blk_zoned.c that allows us to trace report-zones, zone-mgmt-op and zone-write operations which has direct effect on the zone condition state machine. Also, we update drivers/block/Makefile so that new null_blk related tracefiles can be compiled. Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Chaitanya Kulkarni authored
Add a helper to stringify the zone conditions. We use this helper in the next patch to track zone conditions in tracepoints. Reviewed-by:
-
- 25 Mar, 2020 37 commits
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull 5.7 NVMe updates from Keith. * 'nvme-5.7-rc1' of git://git.infradead.org/nvme: (42 commits) nvme: cleanup namespace identifier reporting in nvme_init_ns_head nvme: rename __nvme_find_ns_head to nvme_find_ns_head nvme: refactor nvme_identify_ns_descs error handling nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrl nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrl nvme: Fix controller creation races with teardown flow nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl nvme: Fix ctrl use-after-free during sysfs deletion nvme-pci: Re-order nvme_pci_free_ctrl nvme: Remove unused return code from nvme_delete_ctrl_sync nvme: Use nvme_state_terminal helper nvme: release ida resources nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO nvmet-tcp: optimize tcp stack TX when data digest is used nvme-fabrics: Use scnprintf() for avoiding potential buffer overflow nvme-multipath: do not reset on unknown status nvmet-rdma: allocate RW ctxs according to mdts nvmet-rdma: Implement get_mdts controller op nvmet: Add get_mdts op for controllers nvme-pci: properly print controller address ...
-
Christoph Hellwig authored
Lift the common namespace identifier reporting between the shared namespace and new nshead cases into common code. This also means one less lock is held while doing I/O. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Keith Busch <kbusch@kernel.org>
-
Christoph Hellwig authored
There is no non __-prefixed version, so make the name a little more readable. Signed-off-by:
-
Christoph Hellwig authored
Move the handling of an error into the function from the caller, and only do it for an actual error on the admin command itself, not the command parsing, as that should be enough to deal with devices claiming a bogus version compliance. Signed-off-by:
-
Israel Rukshin authored
The transition to LIVE state should not fail in case of a new controller. Moving to DELETING state before nvme_tcp_create_ctrl() allocates all the resources may leads to NULL dereference at teardown flow (e.g., IO tagset, admin_q, connect_q). Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
-
Israel Rukshin authored
The transition to LIVE state should not fail in case of a new controller. Moving to DELETING state before nvme_tcp_create_ctrl() allocates all the resources may leads to NULL dereference at teardown flow (e.g., IO tagset, admin_q, connect_q). Signed-off-by:
-
Israel Rukshin authored
Calling nvme_sysfs_delete() when the controller is in the middle of creation may cause several bugs. If the controller is in NEW state we remove delete_controller file and don't delete the controller. The user will not be able to use nvme disconnect command on that controller again, although the controller may be active. Other bugs may happen if the controller is in the middle of create_ctrl callback and nvme_do_delete_ctrl() starts. For example, freeing I/O tagset at nvme_do_delete_ctrl() before it was allocated at create_ctrl callback. To fix all those races don't allow the user to delete the controller before it was fully created. Signed-off-by:
-
Israel Rukshin authored
Put the ctrl reference count at nvme_uninit_ctrl as opposed to nvme_init_ctrl which takes it. This decrease the reference count at the core layer instead of decreasing it on each transport separately. Also move the call of nvme_uninit_ctrl at PCI driver after calling to nvme_release_prp_pools and nvme_dev_unmap, in order to put the reference count after using the dev. This is safe because those functions use nvme_dev which is freed only later at nvme_pci_free_ctrl. Signed-off-by:
-
Israel Rukshin authored
In case nvme_sysfs_delete() is called by the user before taking the ctrl reference count, the ctrl may be freed during the creation and cause the bug. Take the reference as soon as the controller is externally visible, which is done by cdev_device_add() in nvme_init_ctrl(). Also take the reference count at the core layer instead of taking it on each transport separately. Signed-off-by:
-
Israel Rukshin authored
Destroy the resources in the same order like in nvme_probe error flow to improve code readability. Signed-off-by:
-
Israel Rukshin authored
The return code of nvme_delete_ctrl_sync is never used, so change it to void. Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
-
Israel Rukshin authored
Improve code readability. Reviewed-by:
-
Max Gurtovoy authored
ida instances allocate some internal memory in addition to the base 'struct ida'. Use ida_destroy() to release that memory at module_exit(). Reviewed-by:
-
masahiro31.yamada@kioxia.com authored
Currently 32 bit application gets ENOTTY when it calls compat_ioctl with NVME_IOCTL_SUBMIT_IO in 64 bit kernel. The cause is that the results of sizeof(struct nvme_user_io), which is used to define NVME_IOCTL_SUBMIT_IO, are not same between 32 bit compiler and 64 bit compiler. * 32 bit: the result of sizeof nvme_user_io is 44. * 64 bit: the result of sizeof nvme_user_io is 48. 64 bit compiler seems to add 32 bit padding for multiple of 8 bytes. This patch adds a compat_ioctl handler. The handler replaces NVME_IOCTL_SUBMIT_IO32 with NVME_IOCTL_SUBMIT_IO in case 32 bit application calls compat_ioctl for submit in 64 bit kernel. Then, it calls nvme_ioctl as usual. Reviewed-by:
Masahiro Yamada (KIOXIA) <masahiro31.yamada@kioxia.com> Signed-off-by:
-
Sagi Grimberg authored
If we have a 4-byte data digest to send to the wire, but we have more data to send, set MSG_MORE to tell the stack that more is coming. Reviewed-by:
Mark Wunderlich <mark.wunderlich@intel.com> Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Reviewed-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
John Meneghini authored
The nvme multipath error handling defaults to controller reset if the error is unknown. There are, however, no existing nvme status codes that indicate a reset should be used, and resetting causes unnecessary disruption to the rest of IO. Change nvme's error handling to first check if failover should happen. If not, let the normal error handling take over rather than reset the controller. Based-on-a-patch-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
John Meneghini <johnm@netapp.com> Signed-off-by:
-
Max Gurtovoy authored
Current nvmet-rdma code allocates MR pool budget based on queue size, assuming both host and target use the same "max_pages_per_mr" count. After limiting the mdts value for RDMA controllers, we know the factor of maximum MR's per IO operation. Thus, make sure MR pool will be sufficient for the required IO depth and IO size. That is, say host's SQ size is 100, then the MR pool budget allocated currently at target will also be 100 MRs. But 100 IO WRITE Requests with 256 sg_count(IO size above 1MB) require 200 MRs when target's "max_pages_per_mr" is 128. Reported-by:
Krishnamraju Eraparaju <krishna2@chelsio.com> Reviewed-by:
-
Max Gurtovoy authored
Set the maximal data transfer size to be 1MB (currently mdts is unlimited). This will allow calculating the amount of MR's that one ctrl should allocate to fulfill it's capabilities. Reviewed-by:
-
Max Gurtovoy authored
Some transports, such as RDMA, would like to set the Maximum Data Transfer Size (MDTS) according to device/port/ctrl characteristics. This will enable the transport to set the optimal MDTS according to controller needs and device capabilities. Add a new nvmet transport op that is called during ctrl identification. This will not effect transports that don't implement this option. The return value of the new op is according to the NVMe spec definition for MDTS. Reviewed-by:
-
Max Gurtovoy authored
Align PCI address print with fabrics address that is printed with newline character. Before: [root@server40 linux]# cat /sys/class/nvme/nvme2/address 0000:0b:00.0[root@server40 linux]# After: [root@server40 linux]# cat /sys/class/nvme/nvme2/address 0000:0b:00.0 [root@server40 linux]# Reviewed-by:
-
Sagi Grimberg authored
If we failed to receive data from the socket, don't try to further process it, we will for sure be handling a queue error at this point. While no issue was seen with the current behavior thus far, its safer to cease socket processing if we detected an error. Signed-off-by:
-
Sagi Grimberg authored
Consolidate the request failure handling code to where it is being fetched (nvme_tcp_try_send). Signed-off-by:
-
Sagi Grimberg authored
MAXH2CDATA is not zero based. Also no reason to limit ourselves to 1M transfers as we can do more easily. Make this an arbitrary limit of 16M. Reported-by:
Wenhua Liu <liuw@vmware.com> Cc: stable@vger.kernel.org # v5.0+ Signed-off-by:
-
Sagi Grimberg authored
Currently, queue io_cpu assignment is done sequentially for default, read and poll queues based on queue id. This causes miss-alignment between context of CPU initiating I/O and the I/O worker thread processing queued requests or completions. Change to modify queue io_cpu assignment to take into account queue maps offset. Each queue io_cpu will start at zero for each queue map. This essentially aligns read/poll queues to start over the same range as default queues. Testing performed by Mark with: - ram device (nvmet) - single CPU core (pinned) - 100% 4k reads - engine io_uring (not using sq_thread option) - hipri flag set Micro-benchmark results show a net gain of: - increase of 18%-29% in IOPs - reduction of 16%-22% in average latency - reduction of 7%-23% in 99.99% latency Baseline: ======== QDepth/Batch | IOPs [k] | Avg. Lat [us] | 99.99% Lat [us] ----------------------------------------------------------------- 1/1 | 32.4 | 30.11 | 50.94 32/8 | 179 | 168.20 | 371 CPU alignment: ============= QDepth/Batch | IOPs [k] | Avg. Lat [us] | 99.99% Lat [us] ----------------------------------------------------------------- 1/1 | 38.5 | 25.18 | 39.16 32/8 | 231 | 130.75 | 343 Reported-by:
-
Keith Busch authored
The timeout handler can use the existing nvme_poll() if it needs to check a polled queue, allowing nvme_poll_irqdisable() to handle only irq driven queues for the remaining callers. Signed-off-by: -
Keith Busch authored
Completion handling had been done in two steps: find all new completions under a lock, then handle those completions outside the lock. This was done to make the locked section as short as possible so that other threads using the same lock wait less time. The driver no longer shares locks during completion, and is in fact lockless for interrupt driven queues, so the optimization no longer serves its original purpose. Replace the two-pass completion queue handler with a single pass that completes entries immediately. Reviewed-by:
-
Keith Busch authored
The only user for tagged completion was for timeout handling. That user, though, really only cares if the timed out command is completed, which we can safely check within the timeout handler. Remove the tag check to simplify completion handling. Reviewed-by:
-
Alexey Dobriyan authored
Update CQ head with pre-increment operator. This saves subtraction of 1 and a few registers. Also update phase with "^= 1". This generates only one RMW instruction. ffffffff815ba150 <nvme_update_cq_head>: ffffffff815ba150: 0f b7 47 70 movzx eax,WORD PTR [rdi+0x70] ffffffff815ba154: 83 c0 01 add eax,0x1 ffffffff815ba157: 66 89 47 70 mov WORD PTR [rdi+0x70],ax ffffffff815ba15b: 66 3b 47 68 cmp ax,WORD PTR [rdi+0x68] ffffffff815ba15f: 74 01 je ffffffff815ba162 <nvme_update_cq_head+0x12> ffffffff815ba161: c3 ret ffffffff815ba162: 31 c0 xor eax,eax ffffffff815ba164: 80 77 74 01 ===> xor BYTE PTR [rdi+0x74],0x1 ffffffff815ba168: 66 89 47 70 mov WORD PTR [rdi+0x70],ax ffffffff815ba16c: c3 ret add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-119 (-119) Function old new delta nvme_poll 690 678 -12 nvme_dev_disable 1230 1177 -53 nvme_irq 613 559 -54 Signed-off-by:Alexey Dobriyan <adobriyan@gmail.com>
-
Amit Engel authored
For set feature command when setting up NVME_FEAT_NUM_QUEUES, check Number of I/O Completion Queues Requested (NCQR) and Number of I/O Submission Queues Requested (NSQR) before we proceed, for invalid values (i.e. 65535) return an appropriate NVMe invalid field status. Signed-off-by:
Amit Engel <Amit.Engel@dell.com> Signed-off-by:
-
Josh Triplett authored
After initialization, nvme_wait_ready checks for readiness every 100ms, even though the drive may be ready far sooner than that. This delays system boot by hundreds of milliseconds. Reduce the delay, checking for readiness every millisecond instead. Boot-time tests on an AWS c5.12xlarge: Before: [ 0.546936] initcall nvme_init+0x0/0x5b returned 0 after 37 usecs ... [ 0.764178] nvme nvme0: 2/0/0 default/read/poll queues [ 0.768424] nvme0n1: p1 [ 0.774132] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 0.774146] VFS: Mounted root (ext4 filesystem) on device 259:1. ... [ 0.788141] Run /sbin/init as init process After: [ 0.537088] initcall nvme_init+0x0/0x5b returned 0 after 37 usecs ... [ 0.543457] nvme nvme0: 2/0/0 default/read/poll queues [ 0.548473] nvme0n1: p1 [ 0.554339] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 0.554344] VFS: Mounted root (ext4 filesystem) on device 259:1. ... [ 0.567931] Run /sbin/init as init process Signed-off-by:
Josh Triplett <josh@joshtriplett.org> Reviewed-by:
-
Rupesh Girase authored
Log the controller status to know more about issue if it lies within kernel nvme subsytem or controller is unhealthy. Signed-off-by:
Rupesh Girase <rgirase@redhat.com> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulakrni@wdc.com> Signed-off-by:
-
Chaitanya Kulkarni authored
The function nvme_identify_ns_desc() has 3 levels of nesting which make error message to exceeded > 80 char per line which is not aligned with the kernel code standards and rest of the NVMe subsystem code. Add a helper function to move the processing of the log when the command is successful by reducing the nesting and keeping the code < 80 char per line. Reviewed-by:
-
Jean Delvare authored
I see no good reason for the "If unsure, say N" advice in the description of the NVME_HWMON configuration option. It is not dangerous, it does not select any other option, and has a fairly low overhead. As the option is already not enabled by default, further suggesting hesitant users to not enable it is not useful anyway. Unlike some other options where the description alone may not be sufficient for users to make a decision, NVME_HWMON is pretty simple to grasp in my opinion, so just let the user do what they want. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Sagi Grimberg authored
We allow userspace to connect with a custom hostid which is useful for certain use-cases. However there is is no way to tell what is the hostid used to connect to a given controller. Expose this so userspace can correlate controllers based on hostid. Signed-off-by:
-
Sagi Grimberg authored
We allow userspace to connect with a custom hostnqn which is useful for certain use-cases. However there is no way to tell what is the hostnqn used to connect to a given controller. Expose this so userspace can correlate controllers based on hostnqn. Signed-off-by:
-
Coly Li authored
Commit 253a99d9 ("bcache: move macro btree() and btree_root() into btree.h") makes two duplicated declaration into btree.h, typedef int (btree_map_keys_fn)(); int bch_btree_map_keys(); The kbuild test robot <lkp@intel.com> detects and reports this problem and this patch fixes it by removing the duplicated ones. Fixes: 253a99d9 ("bcache: move macro btree() and btree_root() into btree.h") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
- 22 Mar, 2020 1 commit
-
-
Coly Li authored
The idea of this patch is from Davidlohr Bueso, he posts a patch for bcache to optimize barrier usage for read-modify-write atomic bitops. Indeed such optimization can also apply on other locations where smp_mb() is used before or after an atomic operation. This patch replaces smp_mb() with smp_mb__before_atomic() or smp_mb__after_atomic() in btree.c and writeback.c, where it is used to synchronize memory cache just earlier on other cores. Although the locations are not on hot code path, it is always not bad to mkae things a little better. Signed-off-by:
-
