The variable 'dev' is unused in function 'hgpk_register'.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

On certain boards not all GPIOs may be used as wakeup sources, in which
case some of enable_irq_wake() calls will fail. On resume calling
disable_irq_wake() will warn about unbalanced IRQ wake disable.

Solve this by checking whether enable_irq_wake() succeeded or not and
no not call disable_irq_wake() for these GPIOs/IRQs that have not been
enabled.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Do not try to free iforce device when we closing input device; disconnect
is the only place where it should be deleted.
Reported-by: Johannes Ebke <johannes.ebke@physik.uni-muenchen.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

This adds simple direction calculation when combining effects. It's useful
to decide motor direction for rumble (vibrator).
Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com>
Acked-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

The commit 9e68177e changed 'gain' from
signed to unsigned to fix an issue with rumble effect calculation, however
it introduced problems when calculating constant effects. Having 'gain'
being unsigned int was an unfortunate choice since it dominates all
implicit type conversions causing everything to be treated as unsigned
int.

Let's change it back to signed int and simply add proper casts to rumble
effect calculations.
Reported-by: Gary Stein <lordcnidarian@gmail.com>
Acked-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Instead of waiting for the next timer tick to start playing an effect
do it immediately. This mostly helps systems using low HZ setting.
Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com>
Acked-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

We used to make kseriod freezable to prevent unnecessary attempts at
resuming keyboard and mouse before taking hibernation image when suspend
and hibernation were sharing PM operations. Now that they are separated
and we don't risk resuming during 'thaw' we don't need to freeze kseriod
anymore. This will allow us to start resetting mouse and keyboard a bit
earlier, before rest of the userspace comes back up.
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Instead of doing full-blown reset while suspending or shutting down
the box use lighter form of reset that should take less time.
Tested-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Properly handle version of the protocol where standard PS/2 packets
from trackpoint are stuffed into middle (byte 3-6) of the standard
ALPS packets when both the touchpad and trackpoint are used together.

The patch is based on work done by Matthew Chapman and additional
research done by David Kubicek and Erik Osterholm:

	https://bugs.launchpad.net/ubuntu/+source/linux/+bug/296610

Many thanks to David Kubicek for his efforts in researching fine points
of this new version of the protocol, especially interaction between pad
and stick in these models.
Signed-off-by: Sebastian Kapfer <sebastian_kapfer@gmx.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

The commit 66d2a595 introduces a bug:
for every beep requested, a bell is also generated.
Reported-by: Paul Martin <pm@debian.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

ps2if->irq is unsigned so the test does not work.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

This driver provides support for the touchscreen interface
integrated into the Freescale MC13783.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

This driver was merged before the ep93xx core support was added
for the keypad clock and acquiring/releasing the necessary gpio's.
Now that the proper support is in the ep93xx core this driver
needs to be updated to work correctly.

Summary of changes:
  1) Remove some unused members from the platform data.
  2) Remove the custom KEY macro and use the ones available in
     <linux/input/matrix_keypad.h>
  3) Remove the keypad_{readl/writel} macros and just use
     __raw_{readl/writel} directly.
  4) Update the clk_set_rate() call to work with the core support.
  5) Cleanup the probe routine and remove some unneeded messages.
  6) Use the ep93xx core functions to acquire and release the gpio's.
  7) Fix the clk_get() call to get the keypad clock.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Since Graphire/Bamboo devices report pen and expresskeys in the same
data packet, we need to send a input_sync event to separate pen data
from expresskeys for X11 driver to process them properly.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

This adds support for the foolowing Wacom devices:

 - 0x9F - a single touch only LCD tablet;
 - 0xE2 - a two finger touch only LCD tablet;
 - 0xE3 -  a two finger touch, penabled LCD tablet.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Call wacom_query_tablet_data() from wacom_resume() so the device will be
switched to Wacom mode upon resume. Devices that require this are: regular
tablets and two finger touch devices.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

We can't use msleep() while holding a spinlock, moreower serio's write()
method is supposed to be useable from inettrupt context. Let's do what
i8042 does and poll the status register every 50 us (with udelay).
Reported-by: Marjan Fojkar <marjan@pajkc.eu>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Gigabyte netbook model M1022M requires i8042.noloop, otherwise AUX port
will not detected and the touchpad will not work. Unfortunately chassis
type in DMI set to "Other" and thus generic laptop entry does not fire
on it.
Reported-by: Darryl Bond <dbond@nrggos.com.au>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: Avoid IO in udf_clear_inode
  udf: Try harder when looking for VAT inode
  udf: Fix compilation with UDFFS_DEBUG enabled

It is not very good to do IO in udf_clear_inode. First, VFS does not really
expect inode to become dirty there and thus we have to write it ourselves,
second, memory reclaim gets blocked waiting for IO when it does not really
expect it, third, the IO pattern (e.g. on umount) resulting from writes in
udf_clear_inode is bad and it slows down writing a lot.

The reason why UDF needed to do IO in udf_clear_inode is that UDF standard
mandates extent length to exactly match inode size. But when we allocate
extents to a file or directory, we don't really know what exactly the final
file size will be and thus temporarily set it to block boundary and later
truncate it to exact length in udf_clear_inode. Now, this is changed to
truncate to final file size in udf_release_file for regular files. For
directories and symlinks, we do the truncation at the moment when learn
what the final file size will be.
Signed-off-by: Jan Kara <jack@suse.cz>

Some disks do not contain VAT inode in the last recorded block as required
by the standard but a few blocks earlier (or the number of recorded blocks
is wrong). So look for the VAT inode a bit before the end of the media.
Signed-off-by: Jan Kara <jack@suse.cz>

Signed-off-by: Jan Kara <jack@suse.cz>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: Clean up thermal init by introducing intel_thermal_supported()
  x86, mce: Thermal monitoring depends on APIC being enabled
  x86: Gart: fix breakage due to IOMMU initialization cleanup
  x86: Move swiotlb initialization before dma32_free_bootmem
  x86: Fix build warning in arch/x86/mm/mmio-mod.c
  x86: Remove usedac in feature-removal-schedule.txt
  x86: Fix duplicated UV BAU interrupt vector
  nvram: Fix write beyond end condition; prove to gcc copy is safe
  mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safe
  x86: Limit the number of processor bootup messages
  x86: Remove enabling x2apic message for every CPU
  doc: Add documentation for bootloader_{type,version}
  x86, msr: Add support for non-contiguous cpumasks
  x86: Use find_e820() instead of hard coded trampoline address
  x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasks

Trivial percpu-naming-introduced conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: CodingStyle fixes
  pcmcia: remove unused IRQ_FIRST_SHARED

* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits)
  spi: fix probe/remove section markings
  Add OMAP spi100k driver
  spi-imx: don't access struct device directly but use dev_get_platdata
  spi-imx: Add mx25 support
  spi-imx: use positive logic to distinguish cpu variants
  spi-imx: correct check for platform_get_irq failing
  ARM: NUC900: Add spi driver support for nuc900
  spi: SuperH MSIOF SPI Master driver V2
  spi: fix spidev compilation failure when VERBOSE is defined
  spi/au1550_spi: fix setupxfer not to override cfg with zeros
  spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove
  spi/i.MX: fix broken error handling for gpio_request
  spi/i.mx: drain MXC SPI transfer buffer when probing device
  MAINTAINERS: add SPI co-maintainer.
  spi/xilinx_spi: fix incorrect casting
  spi/mpc52xx-spi: minor cleanups
  xilinx_spi: add a platform driver using the xilinx_spi common module.
  xilinx_spi: add support for the DS570 IP.
  xilinx_spi: Switch to iomem functions and support little endian.
  xilinx_spi: Split into of driver and generic part.
  ...

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf sched: Fix build failure on sparc
  perf bench: Add "all" pseudo subsystem and "all" pseudo suite
  perf tools: Introduce perf_session class
  perf symbols: Ditch dso->find_symbol
  perf symbols: Allow lookups by symbol name too
  perf symbols: Add missing "Variables" entry to map_type__name
  perf symbols: Add support for 'variable' symtabs
  perf symbols: Introduce ELF counterparts to symbol_type__is_a
  perf symbols: Introduce symbol_type__is_a
  perf symbols: Rename kthreads to kmaps, using another abstraction for it
  perf tools: Allow building for ARM
  hw-breakpoints: Handle bad modify_user_hw_breakpoint off-case return value
  perf tools: Allow cross compiling
  tracing, slab: Fix no callsite ifndef CONFIG_KMEMTRACE
  tracing, slab: Define kmem_cache_alloc_notrace ifdef CONFIG_TRACING

Trivial conflict due to different fixes to modify_user_hw_breakpoint()
in include/linux/hw_breakpoint.h

Global variable declarations must match the definitions in section attributes
as the compiler is at liberty to vary the method it uses to access a variable,
depending on the section it is in.

When building the FRV arch, I now see:

  drivers/built-in.o: In function `pci_apply_final_quirks':
  drivers/pci/quirks.c:2606: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o
  drivers/pci/quirks.c:2623: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o
  drivers/pci/quirks.c:2630: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o

because the declaration of pci_dfl_cache_line_size in linux/pci.h does not
match the definition in drivers/pci/pci.c.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If there is no hardware breakpoint support, modify_user_hw_breakpoint()
tries to return a NULL pointer through as an 'int' return value:

  In file included from kernel/exit.c:53:
  include/linux/hw_breakpoint.h: In function 'modify_user_hw_breakpoint':
  include/linux/hw_breakpoint.h:96: warning: return makes integer from pointer without a cast

Return 0 instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (46 commits)
  microblaze: Remove rt_sigsuspend wrapper
  microblaze: nommu: Don't clobber R11 on syscalls
  microblaze: Remove show_tmem function
  microblaze: Support for WB cache
  microblaze: Add PVR for Microblaze v7.30.a
  microblaze: Remove ancient and fake microblaze version from cpu_ver table
  microblaze: Remove panic_timeout init value
  microblaze: Do not count system calls in default
  microblaze: Enable DTC compilation
  microblaze: Core oprofile configs and hooks
  microblaze: Fix level interrupt ACKing
  microblaze: Enable futimesat syscall
  microblaze: Checking DTS against PVR for write-back cache
  microblaze: Remove duplicity from pgalloc.h
  microblaze: Futex support
  microblaze: Adding dev_arch_data functions
  microblaze: Fix the heartbeat gpio to be more robust
  microblaze: Simple __copy_tofrom_user for noMMU
  microblaze: Export memory_start for modules
  microblaze: Use lowest-common-denominator default CPU settings
  ...

* 'for-linus' of git://neil.brown.name/md: (27 commits)
  md: add 'recovery_start' per-device sysfs attribute
  md: rcu_read_lock() walk of mddev->disks in md_do_sync()
  md: integrate spares into array at earliest opportunity.
  md: move compat_ioctl handling into md.c
  md: revise Kconfig help for MD_MULTIPATH
  md: add MODULE_DESCRIPTION for all md related modules.
  raid: improve MD/raid10 handling of correctable read errors.
  md/raid10: print more useful messages on device failure.
  md/bitmap: update dirty flag when bitmap bits are explicitly set.
  md: Support write-intent bitmaps with externally managed metadata.
  md/bitmap: move setting of daemon_lastrun out of bitmap_read_sb
  md: support updating bitmap parameters via sysfs.
  md: factor out parsing of fixed-point numbers
  md: support bitmap offset appropriate for external-metadata arrays.
  md: remove needless setting of thread->timeout in raid10_quiesce
  md: change daemon_sleep to be in 'jiffies' rather than 'seconds'.
  md: move offset, daemon_sleep and chunksize out of bitmap structure
  md: collect bitmap-specific fields into one structure.
  md/raid1: add takeover support for raid5->raid1
  md: add honouring of suspend_{lo,hi} to raid1.
  ...

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (58 commits)
  mfd: Add twl6030 regulator subdevices
  regulator: Add support for twl6030 regulators
  rtc: Add twl6030 RTC support
  mfd: Add support for twl6030 irq framework
  mfd: Rename twl4030_ routines in twl-regulator.c
  mfd: Rename twl4030_ routines in rtc-twl.c
  mfd: Rename all twl4030_i2c*
  mfd: Rename twl4030* driver files to enable re-use
  mfd: Clarify twl4030 return value for read and write
  mfd: Add all twl4030 regulators to the twl4030 mfd driver
  mfd: Don't set mc13783 ADREFMODE for touch conversions
  mfd: Remove ezx-pcap defines for custom led gpio encoding
  mfd: Near complete mc13783 rewrite
  mfd: Remove build time warning for WM835x register default tables
  mfd: Force I2C to be built in when building WM831x
  mfd: Don't allow wm831x to be built as a module
  mfd: Fix incorrect error check for wm8350-core
  mfd: Fix twl4030 warning
  gpiolib: Implement gpio_to_irq() for wm831x
  mfd: Remove default selection of AB4500
  ...

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: fix lh7a40x build
  ARM: fix sa1100 build
  ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug
  ARM: VFP: fix vfp thread init bug and document vfp notifier entry conditions
  ARM: pxa: fix now incorrect reference of skt->irq by using skt->socket.pci_irq
  [ARM] pxa/zeus: default configuration for Arcom Zeus SBC.
  [ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus
  [ARM] pxa/zeus: basic support for Arcom Zeus SBC
  [ARM] pxa/em-x270: fix usb hub power up/reset sequence
  PCMCIA: fix pxa2xx_lubbock modular build error
  ARM: RealView: Fix typo in the RealView/PBX Kconfig entry
  ARM: Do not allow the probing of the local timer
  ARM: Add an earlyprintk debug console

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (75 commits)
  NFS: Fix nfs_migrate_page()
  rpc: remove unneeded function parameter in gss_add_msg()
  nfs41: Invoke RECLAIM_COMPLETE on all new client ids
  SUNRPC: IS_ERR/PTR_ERR confusion
  NFSv41: Fix a potential state leakage when restarting nfs4_close_prepare
  nfs41: Handle NFSv4.1 session errors in the delegation recall code
  nfs41: Retry delegation return if it failed with session error
  nfs41: Handle session errors during delegation return
  nfs41: Mark stateids in need of reclaim if state manager gets stale clientid
  NFS: Fix up the declaration of nfs4_restart_rpc when NFSv4 not configured
  nfs41: Don't clear DRAINING flag on NFS4ERR_STALE_CLIENTID
  nfs41: nfs41_setup_state_renewal
  NFSv41: More cleanups
  NFSv41: Fix up some bugs in the NFS4CLNT_SESSION_DRAINING code
  NFSv41: Clean up slot table management
  NFSv41: Fix nfs4_proc_create_session
  nfs41: Invoke RECLAIM_COMPLETE
  nfs41: RECLAIM_COMPLETE functionality
  nfs41: RECLAIM_COMPLETE XDR functionality
  Cleanup some NFSv4 XDR decode comments
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits)
  m68k: rename global variable vmalloc_end to m68k_vmalloc_end
  percpu: add missing per_cpu_ptr_to_phys() definition for UP
  percpu: Fix kdump failure if booted with percpu_alloc=page
  percpu: make misc percpu symbols unique
  percpu: make percpu symbols in ia64 unique
  percpu: make percpu symbols in powerpc unique
  percpu: make percpu symbols in x86 unique
  percpu: make percpu symbols in xen unique
  percpu: make percpu symbols in cpufreq unique
  percpu: make percpu symbols in oprofile unique
  percpu: make percpu symbols in tracer unique
  percpu: make percpu symbols under kernel/ and mm/ unique
  percpu: remove some sparse warnings
  percpu: make alloc_percpu() handle array types
  vmalloc: fix use of non-existent percpu variable in put_cpu_var()
  this_cpu: Use this_cpu_xx in trace_functions_graph.c
  this_cpu: Use this_cpu_xx for ftrace
  this_cpu: Use this_cpu_xx in nmi handling
  this_cpu: Use this_cpu operations in RCU
  this_cpu: Use this_cpu ops for VM statistics
  ...

Fix up trivial (famous last words) global per-cpu naming conflicts in
	arch/x86/kvm/svm.c
	mm/slab.c

In recent months, two different network projects erroneously
strayed down the rw_lock path.  Update the Documentation
based upon comments by Eric Dumazet and Paul E. McKenney in
those threads.

Further updates await somebody else with more expertise.

Changes:
  - Merged with extensive content by Stephen Hemminger.
  - Fix one of the comments by Linus Torvalds.

Signed-off-by: William.Allen.Simpson@gmail.com
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It looks better to have a common function. No change in functionality.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <4B25FDDC.407@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>

Add check if APIC is not disabled since thermal
monitoring depends on it. As only apic gets disabled
we should not try to install "thermal monitor" vector,
print out that thermal monitoring is enabled and etc...

Note that "Intel Correct Machine Check Interrupts" already
has such a check.

Also I decided to not add cpu_has_apic check into
mcheck_intel_therm_init since even if it'll call apic_read on
disabled apic -- it's safe here and allow us to save a few code
bytes.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
LKML-Reference: <4B25FDC2.3020401@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>