- 16 Sep, 2014 36 commits
-
-
Joe Lawrence authored
Add an uint16_t variant of qla2x00_check_reg_for_disconnect and use these routines to check and schedule a PCI-disconnected board from a centralized place. Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Acked-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Joe Lawrence authored
Take advantage of commit fe1b806f ("qla2xxx: Refactor shutdown code so some functionality can be reused") to remove an inlined copy of qla2x00_clear_drv_active in the driver's probe hardware error path. Signed-off-by:
-
Joe Lawrence authored
Once calling scsi_host_put, be careful to not access qla_hw_data through the Scsi_Host private data (ie, scsi_qla_host base_vha). Fixes: fe1b806f ("qla2xxx: Refactor shutdown code so some functionality can be reused") Cc: stable@vger.kernel.org # 3.14, 3.15, 3.16 Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by:
Alexander Gordeev <agordeev@redhat.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Alexander Gordeev authored
Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by:
-
Alexander Gordeev authored
There is no need to call pci_disable_msix() in case the previous call to pci_enable_msix() failed Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by:
-
Adam Radford authored
The following patch for megaraid_sas updates the driver version and Documentation/scsi/ChangeLog.megaraid_sas. Signed-off-by:
Adam Radford <aradford@gmail.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Adam Radford authored
The following patch for megaraid_sas fixes a reset_mutex leak in megasas_reset_fusion(). Signed-off-by:
-
Adam Radford authored
The following patch for megaraid_sas removes some unused variables from the megasas_instance structure. Signed-off-by:
-
Adam Radford authored
The following patch for megaraid_sas adds a missing initial call to megasas_get_ld_vf_affiliation() at the end of megasas_probe_one(). Signed-off-by:
-
Adam Radford authored
The following patch for megaraid_sas fixes the LD/VF affiliation policy parsing code to account for LD targetId's and Hidden LD's (not yet affiliated with any Virtual Functions). This also breaks megasas_get_ld_vf_affiliation() into 2 separate functions: megasas_get_ld_vf_affiliation_111() and megasas_get_ld_Vf_affiliation_12() to reduce indentation levels. Signed-off-by:
-
Douglas Gilbert authored
Since a lot of functionality from SPC-4 is supported by this driver (e.g. LBP and PI) then bump the default INQUIRY version from SPC-3 to SPC-4. Also update the INQUIRY version descriptors. Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Reviewed-by:
-
Douglas Gilbert authored
Give existing errors priority over the generation of Task Set Full (TSF) errors. So that max_queue is not exceeded, existing errors may be sent back in the invocation thread. This is done so errors like Unit Attentions are not hidden and lost by either max_queue exceeded or real/injected TSFs. Signed-off-by:
-
Douglas Gilbert authored
This patch removes a NULL check for the scsi_cmnd::cmnd pointer since many other instances in this driver and elsewhere assume it is valid. Also redundant casts to 'unsigned char *' are removed as the pointer has that type. Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc excess parameter warning: Warning(..//drivers/message/fusion/mptbase.c:1411): Excess function parameter 'prod_name' description in 'mpt_get_product_name' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Tomas Henzl authored
When a second(kdump) kernel starts and the hard reset method is used the driver calls pci_disable_device without previously enabling it, so the kernel shows a warning - [ 16.876248] WARNING: at drivers/pci/pci.c:1431 pci_disable_device+0x84/0x90() [ 16.882686] Device hpsa disabling already-disabled device ... This patch fixes it, in addition to this I tried to balance also some other pairs of enable/disable device in the driver. Unfortunately I wasn't able to verify the functionality for the case of a sw reset, because of a lack of proper hw. Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
-
Suresh Thiagarajan authored
Instead of using the virt_ptr use request buffer for copying back the nvmd response data and use the same in request function also Signed-off-by:
Suresh Thiagarajan <suresh.thiagarajan@pmcs.com> Reviewed-by:
-
Jayamohan Kallickal authored
Bump the driver version Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Jayamohan Kallickal authored
Driver should process the completion queue entries before a connection resources are freed. While running mixed traffic due to latency, driver processes the CQE after the connection resources are freed. This fix processes all the completion queue before the connection resources are freed. Signed-off-by:
-
Jayamohan Kallickal authored
During port async event driver should check if there is any boot target configured on the adapter. Update sysfs enteries with the boot target parameters. Signed-off-by:
Minh Tran <minhduc.tran@emulex.com> Signed-off-by:
-
Jayamohan Kallickal authored
Change the copyright year to 2014 Signed-off-by:
-
Jayamohan Kallickal authored
commit 73af08e1 Author: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Date: Mon May 5 21:41:26 2014 -0400 be2iscsi: Fix interrupt Coalescing mechanism. Signed-off-by:
-
Hans Wennborg authored
The prefix suggests the number should be printed in hex, so use the %x specifier to do that. Found by using regex suggested by Joe Perches. Signed-off-by:
Hans Wennborg <hans@hanshq.net> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Chad Dupuis authored
Limiting which port update events will allow the driver to kick off a name server scan has been problematic in some corner cases so remove the restriction and restore the previous semantic. Also move the link up/down informational messages to the LOOP_UP and LOOP_DOWN events. Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
-
Chad Dupuis authored
Move the mailbox failure messages to a default debugging level so that benign failures won't flood the system logs but will still show up if default debug messaging is enabled (ql2xextended_error_logging=1). Signed-off-by:
-
Rasmus Villemoes authored
Rounding up to a multiple of 4 should be done using the ALIGN macro. As a bonus, this also makes the generated code smaller. In GetIocFacts(), sz is assigned to a few lines below without being read in the meantime, so it is ok that it doesn't end up with the same value as facts->FWImageSize. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Log message code 0x00c6 preserved, although it is reported after successful call to pci_enable_msix_range(), not before possibly unsuccessful call to pci_enable_msix(). Consumers of the error code should not notice the difference. Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by:
Kashyap Desai <Kashyap.desai@avagotech.com> Cc: Neela Syam Kolli <megaraidlinux@lsi.com> Cc: linux-scsi@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by:
-
Alexander Gordeev authored
Currently the driver fails to analize MSI-X re-enablement status on resuming and always assumes the success. This update checks the MSI-X initialization result and fails to resume if MSI-Xs re-enablement failed. Signed-off-by:
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by:
-
Alexander Gordeev authored
Currently the driver falls back to INTx mode when MSI-X initialization failed. This is a suboptimal behaviour for chips that also support MSI. This update changes that behaviour and falls back to MSI mode in case MSI-X mode initialization failed. Signed-off-by:
-
Christoph Hellwig authored
port_detect is only called from the module_init routine and thus implicitly serialized, so remove the driver lock which was held over potentially sleeping function calls. Signed-off-by:
Arthur Marsh <arthur.marsh@internode.on.net> Tested-by:
-
- 15 Sep, 2014 4 commits
-
-
Subhash Jadavani authored
SCSI Well-known logical units generally don't have any scsi driver associated with it which means no one will call scsi_autopm_put_device() on these wlun scsi devices and this would result in keeping the corresponding scsi device always active (hence LLD can't be suspended as well). Same exact problem can be seen for other scsi device representing normal logical unit whose driver is yet to be loaded. This patch fixes the above problem with this approach: - make the scsi_autopm_put_device call at the end of scsi_sysfs_add_sdev to make it balance out the get earlier in the function. - let drivers do paired get/put calls in their probe methods. Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Dolev Raviv <draviv@codeaurora.org> Signed-off-by:
-
Alan Stern authored
The SCSI specification requires that the second Command Data Byte should contain the LUN value in its high-order bits if the recipient device reports SCSI level 2 or below. Nevertheless, some USB mass-storage devices use those bits for other purposes in vendor-specific commands. Currently Linux has no way to send such commands, because the SCSI stack always overwrites the LUN bits. Testing shows that Windows 7 and XP do not store the LUN bits in the CDB when sending commands to a USB device. This doesn't matter if the device uses the Bulk-Only or UAS transports (which virtually all modern USB mass-storage devices do), as these have a separate mechanism for sending the LUN value. Therefore this patch introduces a flag in the Scsi_Host structure to inform the SCSI midlayer that a transport does not require the LUN bits to be stored in the CDB, and it makes usb-storage set this flag for all devices using the Bulk-Only transport. (UAS is handled by a separate driver, but it doesn't really matter because no SCSI-2 or lower device is at all likely to use UAS.) The patch also cleans up the code responsible for storing the LUN value by adding a bitflag to the scsi_device structure. The test for whether to stick the LUN value in the CDB can be made when the device is probed, and stored for future use rather than being made over and over in the fast path. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Tiziano Bacocco <tiziano.bacocco@gmail.com> Acked-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Kashyap.Desai@avagotech.com authored
Add a use_cmd_list flag in struct Scsi_Host to request keeping track of all outstanding commands per device. Default behaviour is not to keep track of cmd_list per sdev, as this may introduce lock contention. (overhead is more on multi-node NUMA.), and only enable it on the two drivers that need it. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Sujit Reddy Thumma authored
The SYNCHRONIZE_CACHE command is a medium write command and hence can fail when the device is write protected. Avoid sending such commands by making sure that write-cache-enable is disabled even though the device claim to support it. Signed-off-by:
Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by:
Venkatesh Srinivas <venkateshs@google.com> Signed-off-by:
-
