- 09 Jun, 2012 40 commits
-
-
Alex Deucher authored
commit d430f7db upstream. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian König authored
commit bb409155 upstream. Locking mutex in different orders just screams for deadlocks, and some testing showed that it is actually quite easy to trigger them. Signed-off-by:
Christian König <deathsimple@vodafone.de> Reviewed-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Rafał Miłecki authored
commit 0aecb5a4 upstream. This is based on info released by AMD, should allow using audio in much more cases. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Reviewed-by:
-
Konstantin Khlebnikov authored
commit fffaee36 upstream. This patch fixes bug in macro radix_tree_for_each_contig(). If radix_tree_next_slot() sees NULL in next slot it returns NULL, but following radix_tree_next_chunk() switches iterating into next chunk. As result iterating becomes non-contiguous and breaks vfs "splice" and all its users. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Reported-and-bisected-by:
Hans de Bruin <jmdebruin@xmsnet.nl> Reported-and-bisected-by:
Ondrej Zary <linux@rainbow-software.org> Reported-bisected-and-tested-by:
Toralf Förster <toralf.foerster@gmx.de> Link: https://lkml.org/lkml/2012/6/5/64Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Salman Qazi authored
commit 95599968 upstream. We can't have references held on pages in the s_buddy_cache while we are trying to truncate its pages and put the inode. All the pages must be gone before we reach clear_inode. This can only be gauranteed if we can prevent new users from grabbing references to s_buddy_cache's pages. The original bug can be reproduced and the bug fix can be verified by: while true; do mount -t ext4 /dev/ram0 /export/hda3/ram0; \ umount /export/hda3/ram0; done & while true; do cat /proc/fs/ext4/ram0/mb_groups; done Signed-off-by:
Salman Qazi <sqazi@google.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Salman Qazi authored
commit 02b78310 upstream. ext4_free_blocks fails to pair an ext4_mb_load_buddy with a matching ext4_mb_unload_buddy when it fails a memory allocation. Signed-off-by:
-
Theodore Ts'o authored
commit 79906964 upstream. In commit 353eb83c we removed i_state_flags with 64-bit longs, But when handling the EXT4_IOC_SETFLAGS ioctl, we replace i_flags directly, which trashes the state flags which are stored in the high 32-bits of i_flags on 64-bit platforms. So use the the ext4_{set,clear}_inode_flags() functions which use atomic bit manipulation functions instead. Reported-by:
Tao Ma <boyu.mt@taobao.com> Signed-off-by:
-
Theodore Ts'o authored
commit f3fc0210 upstream. The ext4_error() function is missing a call to save_error_info(). Since this is the function which marks the file system as containing an error, this oversight (which was introduced in 2.6.36) is quite significant, and should be backported to older stable kernels with high urgency. Reported-by:
Ken Sumrall <ksumrall@google.com> Signed-off-by:
-
Andreas Dilger authored
commit 7e936b73 upstream. A hard-linked directory to its parent can cause the VFS to deadlock, and is a sign of a corrupted file system. So detect this case in ext4_lookup(), before the rmdir() lockup scenario can take place. Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Haogang Chen authored
commit 967ac8af upstream. In alloc_flex_gd(), when flexbg_size is large, kmalloc size would overflow and flex_gd->groups would point to a buffer smaller than expected, causing OOB accesses when it is used. Note that in ext4_resize_fs(), flexbg_size is calculated using sbi->s_log_groups_per_flex, which is read from the disk and only bounded to [1, 31]. The patch returns NULL for too large flexbg_size. Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Haogang Chen <haogangchen@gmail.com> Signed-off-by:
-
Eric Sandeen authored
commit 7e84b621 upstream. If ext4_setup_super() fails i.e. due to a too-high revision, the error is logged in dmesg but the fs is not mounted RO as indicated. Tested by: # mkfs.ext4 -r 4 /dev/sdb6 # mount /dev/sdb6 /mnt/test # dmesg | grep "too high" [164919.759248] EXT4-fs (sdb6): revision level too high, forcing read-only mode # grep sdb6 /proc/mounts /dev/sdb6 /mnt/test2 ext4 rw,seclabel,relatime,data=ordered 0 0 Reviewed-by:
Andreas Dilger <adilger@whamcloud.com> Signed-off-by:
-
Dan Carpenter authored
commit bb3d132a upstream. The ext4_get_group_desc() function returns NULL on error, and ext4_free_inodes_count() function dereferences it without checking. There is a check on the next line, but it's too late. Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Benjamin Poirier authored
[ Upstream commit 91657eaf ] Corrects the function that determines the esp payload size. The calculations done in esp{4,6}_get_mtu() lead to overlength frames in transport mode for certain mtu values and suboptimal frames for others. According to what is done, mainly in esp{,6}_output() and tcp_mtu_to_mss(), net_header_len must be taken into account before doing the alignment calculation. Signed-off-by:
Benjamin Poirier <bpoirier@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 617c8c11 ] At the beginning of __skb_cow, headroom gets set to a minimum of NET_SKB_PAD. This causes unnecessary reallocations if the buffer was not cloned and the headroom is just below NET_SKB_PAD, but still more than the amount requested by the caller. This was showing up frequently in my tests on VLAN tx, where vlan_insert_tag calls skb_cow_head(skb, VLAN_HLEN). Locally generated packets should have enough headroom, and for forward paths, we already have NET_SKB_PAD bytes of headroom, so we don't need to add any extra space here. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
James Chapman authored
[ Upstream commit c51ce497 ] An application may call connect() to disconnect a socket using an address with family AF_UNSPEC. The L2TP IP sockets were not handling this case when the socket is not bound and an attempt to connect() using AF_UNSPEC in such cases would result in an oops. This patch addresses the problem by protecting the sk_prot->disconnect() call against trying to unhash the socket before it is bound. The patch also adds more checks that the sockaddr supplied to bind() and connect() calls is valid. RIP: 0010:[<ffffffff82e133b0>] [<ffffffff82e133b0>] inet_unhash+0x50/0xd0 RSP: 0018:ffff88001989be28 EFLAGS: 00010293 Stack: ffff8800407a8000 0000000000000000 ffff88001989be78 ffffffff82e3a249 ffffffff82e3a050 ffff88001989bec8 ffff88001989be88 ffff8800407a8000 0000000000000010 ffff88001989bec8 ffff88001989bea8 ffffffff82e42639 Call Trace: [<ffffffff82e3a249>] udp_disconnect+0x1f9/0x290 [<ffffffff82e42639>] inet_dgram_connect+0x29/0x80 [<ffffffff82d012fc>] sys_connect+0x9c/0x100 Reported-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Gao feng authored
[ Upstream commit 0c183379 ] Since commit ad0081e4 "ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed" the fragment of packets is incorrect. because tunnel mode needs IPsec headers and trailer for all fragments, while on transport mode it is sufficient to add the headers to the first fragment and the trailer to the last. so modify mtu and maxfraglen base on ipsec mode and if fragment is first or last. with my test,it work well(every fragment's size is the mtu) and does not trigger slow fragment path. Changes from v1: though optimization, mtu_prev and maxfraglen_prev can be delete. replace xfrm mode codes with dst_entry's new frag DST_XFRM_TUNNEL. add fuction ip6_append_data_mtu to make codes clearer. Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by:
-
Yanmin Zhang authored
[ Upstream commit e49cc0da ] We hit a kernel OOPS. <3>[23898.789643] BUG: sleeping function called from invalid context at /data/buildbot/workdir/ics/hardware/intel/linux-2.6/arch/x86/mm/fault.c:1103 <3>[23898.862215] in_atomic(): 0, irqs_disabled(): 0, pid: 10526, name: Thread-6683 <4>[23898.967805] HSU serial 0000:00:05.1: 0000:00:05.2:HSU serial prevented me to suspend... <4>[23899.258526] Pid: 10526, comm: Thread-6683 Tainted: G W 3.0.8-137685-ge7742f9 #1 <4>[23899.357404] HSU serial 0000:00:05.1: 0000:00:05.2:HSU serial prevented me to suspend... <4>[23899.904225] Call Trace: <4>[23899.989209] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.000416] [<c1238c2a>] __might_sleep+0x10a/0x110 <4>[23900.007357] [<c1228021>] do_page_fault+0xd1/0x3c0 <4>[23900.013764] [<c18e9ba9>] ? restore_all+0xf/0xf <4>[23900.024024] [<c17c007b>] ? napi_complete+0x8b/0x690 <4>[23900.029297] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.123739] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.128955] [<c18ea0c3>] error_code+0x5f/0x64 <4>[23900.133466] [<c1227f50>] ? pgtable_bad+0x130/0x130 <4>[23900.138450] [<c17f6298>] ? __ip_route_output_key+0x698/0x7c0 <4>[23900.144312] [<c17f5f8d>] ? __ip_route_output_key+0x38d/0x7c0 <4>[23900.150730] [<c17f63df>] ip_route_output_flow+0x1f/0x60 <4>[23900.156261] [<c181de58>] ip4_datagram_connect+0x188/0x2b0 <4>[23900.161960] [<c18e981f>] ? _raw_spin_unlock_bh+0x1f/0x30 <4>[23900.167834] [<c18298d6>] inet_dgram_connect+0x36/0x80 <4>[23900.173224] [<c14f9e88>] ? _copy_from_user+0x48/0x140 <4>[23900.178817] [<c17ab9da>] sys_connect+0x9a/0xd0 <4>[23900.183538] [<c132e93c>] ? alloc_file+0xdc/0x240 <4>[23900.189111] [<c123925d>] ? sub_preempt_count+0x3d/0x50 Function free_fib_info resets nexthop_nh->nh_dev to NULL before releasing fi. Other cpu might be accessing fi. Fixing it by delaying the releasing. With the patch, we ran MTBF testing on Android mobile for 12 hours and didn't trigger the issue. Thank Eric for very detailed review/checking the issue. Signed-off-by:
Yanmin Zhang <yanmin_zhang@linux.intel.com> Signed-off-by:
Kun Jiang <kunx.jiang@intel.com> Acked-by:
-
Eric Dumazet authored
[ Upstream commit 9dae3100 ] asix driver drops 8021Q full size frames because it doesn't take into account VLAN header size. Tested on AX88772 adapter. Signed-off-by:
-
Thomas Hellstrom authored
commit 0824db38 upstream. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit a8ff3ee2 upstream. This imbalance may cause hangs when TTM is trying to swap out a buffer that is already on the delayed delete list. Signed-off-by:
-
Jerome Glisse authored
commit 95c4b23e upstream. Without this bit sets we get broken rendering and lockups. fglrx sets this bit. Bugs that should be fixed by this patch : https://bugs.freedesktop.org/show_bug.cgi?id=49792 https://bugzilla.kernel.org/show_bug.cgi?id=43207 https://bugs.freedesktop.org/show_bug.cgi?id=39282Signed-off-by:
-
Alex Deucher authored
commit 0b8c30bc upstream. Need to program an additional VM register. This doesn't not currently cause any problems, but allows us to program the proper backend map in a subsequent patch which should improve performance on these asics. Signed-off-by:
-
Alex Deucher authored
commit 29d65406 upstream. While there are cards with more than 8 mem banks, the max number of banks from a tiling perspective is 8, so cap the tiling config at 8 banks. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43448Signed-off-by:
-
Alex Deucher authored
commit 9b00147d upstream. radeon_cs_parser_init is called by both the legacy UMS CS ioctl and the KMS CS ioctl. Protect KMS specific pieces of the code by checking that rdev is not NULL. Reported-by:
Michael Burian <michael.burian@sbg.at> Signed-off-by:
-
Sascha Hauer authored
commit 4a43faf5 upstream. Since commit 6a918bad, the mxc_nand driver fails with: Driver must set ecc.strength when using hardware ECC This is because nand_scan_tail checks for correct ecc strength settings, so we must set them up before nand_scan_tail. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Gabor Juhos authored
commit 2e24e32e upstream. The 'mtd_writev' interface calls the function assigned to the '_write' field of a given mtd device if that is not NULL. The block2mtd driver sets the '_writev' field to the 'mtd_writev' function itself and thus causes a endless loop. This is caused by 1dbebd32 (mtd: harmonize mtd_writev usage). Remove the assignment from the block2mtd driver to fix the issue. Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Signed-off-by:
-
Frank Svendsboe authored
commit 2e929d00 upstream. MTD_OF_PARTS and the default setting is not working due to using 'Y' instead of 'y', introduced in commit d6137bad. This made our board, and possibly other boards using DTS defined partitions and not having CONFIG_MTD_OF_PARTS=y defined in the defconfig, fail to mount root. Signed-off-by:
Frank Svendsboe <frank.svendsboe@gmail.com> Signed-off-by:
-
Dmitry Maluka authored
commit 34a5704d upstream. It seems there is a bug in scan_read_raw_oob() in nand_bbt.c which should cause wrong functioning of NAND_BBT_SCANALLPAGES option. Artem: the patch did not apply and I had to amend it a bit. Signed-off-by:
-
Steven Rostedt authored
commit c0525a69 upstream. When an NMI goes off and it sees that it preempted the debug stack, to keep the debug stack safe, it changes the IDT to point to one that does not modify the stack on breakpoint (to allow breakpoints in NMIs). But the variable that gets set to know to undo it on exit never gets cleared on exit. Thus every NMI will reset it on exit the first time it is done even if it does not need to be reset. [ Added H. Peter Anvin's suggestion to use this_cpu_read/write ] Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
H.J. Lu authored
commit bad1a753 upstream. When I added x32 ptrace to 3.4 kernel, I also include PTRACE_ARCH_PRCTL support for x32 GDB For ARCH_GET_FS/GS, it takes a pointer to int64. But at user level, ARCH_GET_FS/GS takes a pointer to int32. So I have to add x32 ptrace to glibc to handle it with a temporary int64 passed to kernel and copy it back to GDB as int32. Roland suggested that PTRACE_ARCH_PRCTL is obsolete and x32 GDB should use fs_base and gs_base fields of user_regs_struct instead. Accordingly, remove PTRACE_ARCH_PRCTL completely from the x32 code to avoid possible memory overrun when pointer to int32 is passed to kernel. Link: http://lkml.kernel.org/r/CAMe9rOpDzHfS7NH7m1vmD9QRw8SSj4Sc%2BaNOgcWm_WJME2eRsQ@mail.gmail.comSigned-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Stephan Gatzka authored
commit 9ca3cc6f upstream. skb_defer_rx_timestamp was called with a freshly allocated skb but must be called with rskb instead. Signed-off-by:
Stephan Gatzka <stephan@gatzka.org> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Dmitry Kasatkin authored
commit 799243a3 upstream. When a file is truncated with truncate()/ftruncate() and then closed, iversion is not updated. This patch uses ATTR_SIZE flag as an indication to increment iversion. Mimi said: On fput(), i_version is used to detect and flag files that have changed and need to be re-measured in the IMA measurement policy. When a file is truncated with truncate()/ftruncate() and then closed, i_version is not updated. As a result, although the file has changed, it will not be re-measured and added to the IMA measurement list on subsequent access. Signed-off-by:
Dmitry Kasatkin <dmitry.kasatkin@intel.com> Acked-by:
Mimi Zohar <zohar@us.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit 63d37a84 upstream. __mnt_make_shortterm() in there undoes the effect of __mnt_make_longterm() we'd done back when we set ->mnt_ns non-NULL; it should not be done to vfsmounts that had never gone through commit_tree() and friends. Kudos to lczerner for catching that one... Signed-off-by:
-
Joonsoo Kim authored
commit 02d7633f upstream. In the case which is below, 1. acquire slab for cpu partial list 2. free object to it by remote cpu 3. page->freelist = t then memory leak is occurred. Change acquire_slab() not to zap freelist when it works for cpu partial list. I think it is a sufficient solution for fixing a memory leak. Below is output of 'slabinfo -r kmalloc-256' when './perf stat -r 30 hackbench 50 process 4000 > /dev/null' is done. ***Vanilla*** Sizes (bytes) Slabs Debug Memory ------------------------------------------------------------------------ Object : 256 Total : 468 Sanity Checks : Off Total: 3833856 SlabObj: 256 Full : 111 Redzoning : Off Used : 2004992 SlabSiz: 8192 Partial: 302 Poisoning : Off Loss : 1828864 Loss : 0 CpuSlab: 55 Tracking : Off Lalig: 0 Align : 8 Objects: 32 Tracing : Off Lpadd: 0 ***Patched*** Sizes (bytes) Slabs Debug Memory ------------------------------------------------------------------------ Object : 256 Total : 300 Sanity Checks : Off Total: 2457600 SlabObj: 256 Full : 204 Redzoning : Off Used : 2348800 SlabSiz: 8192 Partial: 33 Poisoning : Off Loss : 108800 Loss : 0 CpuSlab: 63 Tracking : Off Lalig: 0 Align : 8 Objects: 32 Tracing : Off Lpadd: 0 Total and loss number is the impact of this patch. Acked-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
Joonsoo Kim <js1304@gmail.com> Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Clemens Ladisch authored
commit 5cd5d7c4 upstream. The array of sample rates is reallocated every time when opening the PCM device, but was freed only once when unplugging the device. Reported-by:
"Alexander E. Patrakov" <patrakov@gmail.com> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Dave Hansen authored
commit 4523e145 upstream. hugetlb_reserve_pages() can be used for either normal file-backed hugetlbfs mappings, or MAP_HUGETLB. In the MAP_HUGETLB, semi-anonymous mode, there is not a VMA around. The new call to resv_map_put() assumed that there was, and resulted in a NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: vma_resv_map+0x9/0x30 PGD 141453067 PUD 1421e1067 PMD 0 Oops: 0000 [#1] PREEMPT SMP ... Pid: 14006, comm: trinity-child6 Not tainted 3.4.0+ #36 RIP: vma_resv_map+0x9/0x30 ... Process trinity-child6 (pid: 14006, threadinfo ffff8801414e0000, task ffff8801414f26b0) Call Trace: resv_map_put+0xe/0x40 hugetlb_reserve_pages+0xa6/0x1d0 hugetlb_file_setup+0x102/0x2c0 newseg+0x115/0x360 ipcget+0x1ce/0x310 sys_shmget+0x5a/0x60 system_call_fastpath+0x16/0x1b This was reported by Dave Jones, but was reproducible with the libhugetlbfs test cases, so shame on me for not running them in the first place. With this, the oops is gone, and the output of libhugetlbfs's run_tests.py is identical to plain 3.4 again. [ Marked for stable, since this was introduced by commit c50ac050 ("hugetlb: fix resv_map leak in error path") which was also marked for stable ] Reported-by:
Dave Jones <davej@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Ulrich Drepper authored
commit 9295b7a0 upstream. Programs using /proc/kpageflags need to know about the various flags. The <linux/kernel-page-flags.h> provides them and the comments in the file indicate that it is supposed to be used by user-level code. But the file is not installed. Install the headers and mark the unstable flags as out-of-bounds. The page-type tool is also adjusted to not duplicate the definitions Signed-off-by:
Ulrich Drepper <drepper@gmail.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Jan-Benedict Glaw authored
commit 33471119 upstream. This box has DisplayPort and VGA, but no LVDS. Product specs are at http://h10010.www1.hp.com/wwpc/us/en/sm/WF25a/12454-12454-321959-338927-3640406-4282707.html?dnr=1 and dmidecode output can be found at http://www.getslash.de/bug_attachments/dmidecode-t5740e.txtSigned-off-by:
Jan-Benedict Glaw <jbglaw@getslash.de> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
commit bf2125e2 upstream. Otherwise the hw will get confused and result in a black screen. This regression has been most likely introduce in commit 974b9331 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sun Sep 5 00:44:20 2010 +0100 drm/i915/tv: Poll for DAC state change That commit replace the first msleep(20) with a busy-loop, but failed to keep the 2nd msleep around. Later on we've replaced all these msleep(20) by proper vblanks. For reference also see the commit in xf86-video-intel: commit 1142be53eb8d2ee8a9b60ace5d49f0ba27332275 Author: Jesse Barnes <jbarnes@hobbes.lan> Date: Mon Jun 9 08:52:59 2008 -0700 Fix TV programming: add vblank wait after TV_CTL writes Fxies FDO bug #14000; we need to wait for vblank after writing TV_CTL or following "DPMS on" calls may not actually enable the output. v2: As suggested by Chris Wilson, add a small comment to ensure that no one accidentally removes this vblank wait again - there really seems to be no sane explanation for why we need it, but it is required. Launchpad: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/763688Reported-and-Tested-by:
Robert Lowery <rglowery@exemail.com.au> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by:
-
Rodrigo Vivi authored
commit 9589919f upstream. These 2 modes were removed by mistake during a clean up. So, now it is time to add them back. For further info about supported mode and standard timing table please check: VOL_3_display_registers_updated.pdf at intellinuxgraphics.org. Note that this regression has been introduce in commit 55a6713b Author: Rodrigo Vivi <rodrigo.vivi@gmail.com> Date: Thu Dec 15 14:47:33 2011 -0200 drm/i915: Removing TV Out modes. and this commit partially reverts it by re-adding the wrongly removed modes. Reported-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> [danvet: Pimped commit message to cite the commit that introduced this regression.] Signed-off-by:
-
