- 18 Nov, 2016 40 commits
-
-
Chuck Lever authored
commit 62bdf94a upstream. When a LOCALINV WR is flushed, the frmr is marked STALE, then frwr_op_unmap_sync DMA-unmaps the frmr's SGL. These STALE frmrs are then recovered when frwr_op_map hunts for an INVALID frmr to use. All other cases that need frmr recovery leave that SGL DMA-mapped. The FRMR recovery path unconditionally DMA-unmaps the frmr's SGL. To avoid DMA unmapping the SGL twice for flushed LOCAL_INV WRs, alter the recovery logic (rather than the hot frwr_op_unmap_sync path) to distinguish among these cases. This solution also takes care of the case where multiple LOCAL_INV WRs are issued for the same rpcrdma_req, some complete successfully, but some are flushed. Reported-by:
Vasco Steinmetz <linux@kyberraum.net> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Wagner authored
commit 5690a22d upstream. There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: waiter context waker context frwr_op_unmap_sync() reinit_completion() ib_post_send() wait_for_completion() frwr_wc_localinv_wake() complete() Signed-off-by:
Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Anna Schumaker <Anna.Schumaker@Netapp.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: linux-nfs@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Christian König authored
commit c24784f0 upstream. Some fences might be alive even after we have stopped the scheduler leading to warnings about leaked objects from the SLUB allocator. Fix this by allocating/freeing the SLUB allocator from the module init/fini functions just like we do it for hw fences. v2: make variable static, add link to bug Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=97500Reported-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Grazvydas Ignotas authored
commit a053fb7e upstream. To free fences, call_rcu() is used, which calls amd_sched_fence_free() after a grace period. During teardown, there is no guarantee all callbacks have finished, so sched_fence_slab may be destroyed before all fences have been freed. If we are lucky, this results in some slab warnings, if not, we get a crash in one of rcu threads because callback is called after amdgpu has already been unloaded. Fix it with a rcu_barrier(). Fixes: 189e0fb7 ("drm/amdgpu: RCU protected amd_sched_fence_release") Acked-by:
Chunming Zhou <david1.zhou@amd.com> Reviewed-by:
-
Richard Genoud authored
commit 9bcffe75 upstream. After commit 1cf6e8fc ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), the hardware handshake wasn't functional anymore on Atmel platforms (beside SAMA5D2). To understand why, one has to understand the flag ATMEL_US_USMODE_HWHS first: Before commit 1cf6e8fc ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), this flag was never set. Thus, the CTS/RTS where only handled by serial_core (and everything worked just fine). This commit introduced the use of the ATMEL_US_USMODE_HWHS flag, enabling it for all boards when the user space enables flow control. When the ATMEL_US_USMODE_HWHS is set, the Atmel USART controller handles a part of the flow control job: - disable the transmitter when the CTS pin gets high. - drive the RTS pin high when the DMA buffer transfer is completed or PDC RX buffer full or RX FIFO is beyond threshold. (depending on the controller version). NB: This feature is *not* mandatory for the flow control to work. (Nevertheless, it's very useful if low latencies are needed.) Now, the specifics of the ATMEL_US_USMODE_HWHS flag: - For platforms with DMAC and no FIFOs (sam9x25, sam9x35, sama5D3, sama5D4, sam9g15, sam9g25, sam9g35)* this feature simply doesn't work. ( source: https://lkml.org/lkml/2016/9/7/598 ) Tested it on sam9g35, the RTS pins always stays up, even when RXEN=1 or a new DMA transfer descriptor is set. => ATMEL_US_USMODE_HWHS must not be used for those platforms - For platforms with a PDC (sam926{0,1,3}, sam9g10, sam9g20, sam9g45, sam9g46)*, there's another kind of problem. Once the flag ATMEL_US_USMODE_HWHS is set, the RTS pin can't be driven anymore via RTSEN/RTSDIS in USART Control Register. The RTS pin can only be driven by enabling/disabling the receiver or setting RCR=RNCR=0 in the PDC (Receive (Next) Counter Register). => Doing this is beyond the scope of this patch and could add other bugs, so the original (and working) behaviour should be set for those platforms (meaning ATMEL_US_USMODE_HWHS flag should be unset). - For platforms with a FIFO (sama5d2)*, the RTS pin is driven according to the RX FIFO thresholds, and can be also driven by RTSEN/RTSDIS in USART Control Register. No problem here. (This was the use case of commit 1cf6e8fc ("tty/serial: at91: fix RTS line management when hardware handshake is enabled")) NB: If the CTS pin declared as a GPIO in the DTS, (for instance cts-gpios = <&pioA PIN_PB31 GPIO_ACTIVE_LOW>), the transmitter will be disabled. => ATMEL_US_USMODE_HWHS flag can be set for this platform ONLY IF the CTS pin is not a GPIO. So, the only case when ATMEL_US_USMODE_HWHS can be enabled is when (atmel_use_fifo(port) && !mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) Tested on all Atmel USART controller flavours: AT91SAM9G35-CM (DMAC flavour), AT91SAM9G20-EK (PDC flavour), SAMA5D2xplained (FIFO flavour). * the list may not be exhaustive Fixes: 1cf6e8fc ("tty/serial: at91: fix RTS line management when hardware handshake is enabled") Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [nicolas.ferre@atmel.com: adapt to 4.4.x kernel for stable by adding the atmel_port variable declaration which was missing] Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Alex Deucher authored
commit 757124d9 upstream. On CZ/ST systems with AZ rather than ACP audio, we need to bail early in hw_fini since there is nothing to do. bug: https://bugs.freedesktop.org/show_bug.cgi?id=98276Signed-off-by:
-
Alex Deucher authored
commit 84b1528e upstream. If the platform does not support hybrid graphics or ATPX dGPU power control. Acked-by:
-
Dhinakaran Pandiyan authored
commit 61e0c543 upstream. According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. Let's apply this work around to GEN9 platforms too, as it fixes the same issue. v2: Move drm_device to drm_i915_private conversion Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907 Cc: Libin Yang <libin.yang@linux.intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
commit fbb21c52 upstream. According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. From BSpec: "Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)] Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may be audio corruption or screen corruption." Since, some DP configurations (e.g., MST) use port width x4 and HBR2 link rate, let's increase the cdclk to >= 432 MHz to enable audio for those cases. v4: Changed commit message v3: Combine BDW pixel rate adjustments into a function (Jani) v2: Restrict fix to BDW Retain the set cdclk across modesets (Ville) Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Ville Syrjälä authored
commit 8d83bc22 upstream. The VBT provides the platform a way to mix and match the DDI ports vs. GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose has no standard GMBUS pin assignment. However, there are machines out there that use a non-standard mapping for the other ports as well. Let's start trusting the VBT on this one for all ports on DDI platforms. I've structured the code such that other platforms could easily start using this as well, by simply filling in the ddi_port_info. IIRC there may be CHV system that might actually need this. v2: Include a commit message, include a debug message during init Cc: Maarten Maathuis <madman2003@gmail.com> Tested-by:
Maarten Maathuis <madman2003@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877Signed-off-by:
Jim Bride <jim.bride@linux.intel.com> (cherry picked from commit e4ab73a1) Signed-off-by:
-
Alex Deucher authored
commit 066f1f0b upstream. If the platform does not support hybrid graphics or ATPX dGPU power control. bug: https://bugzilla.kernel.org/show_bug.cgi?id=51381Acked-by:
-
Andre Przywara authored
commit 112b0b8f upstream. In our VGIC implementation we limit the number of SPIs to a number that the userland application told us. Accordingly we limit the allocation of memory for virtual IRQs to that number. However in our MMIO dispatcher we didn't check if we ever access an IRQ beyond that limit, leading to out-of-bound accesses. Add a test against the number of allocated SPIs in check_region(). Adjust the VGIC_ADDR_TO_INT macro to avoid an actual division, which is not implemented on ARM(32). [maz: cleaned-up original patch] Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Bart Van Assche authored
commit df3d422c upstream. The code at the end of alua_rtpg_work() is as follows: scsi_device_put(sdev); kref_put(&pg->kref, release_port_group); In other words, alua_rtpg_queue() must hold an sdev reference and a pg reference before queueing rtpg work. If no rtpg work is queued no additional references should be held when alua_rtpg_queue() returns. If no rtpg work is queued, ensure that alua_rtpg_queue() only gives up the sdev reference if that reference was obtained by the same alua_rtpg_queue() call. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reported-by:
Tang Junhui <tang.junhui@zte.com.cn> Cc: Hannes Reinecke <hare@suse.com> Cc: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
tang.junhui authored
commit 1fdd1427 upstream. Reference count of pg leaks in alua_rtpg_work() since kref_put() is not called to decrease the reference count of pg when the condition pg->rtpg_sdev==NULL satisfied (actually it is easy to satisfy), it would cause memory of pg leakage. Signed-off-by:
-
Sreekanth Reddy authored
commit 6d3a56ed upstream. While merging mpt3sas & mpt2sas code, we added the is_warpdrive check condition on the wrong line --------------------------------------------------------------------------- scsih_target_alloc(struct scsi_target *starget) sas_target_priv_data->handle = raid_device->handle; sas_target_priv_data->sas_address = raid_device->wwid; sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; - raid_device->starget = starget; + sas_target_priv_data->raid_device = raid_device; + if (ioc->is_warpdrive) + raid_device->starget = starget; } spin_unlock_irqrestore(&ioc->raid_device_lock, flags); return 0; ------------------------------------------------------------------------------ That check should be for the line sas_target_priv_data->raid_device = raid_device; Due to above hunk, we are not initializing raid_device's starget for raid volumes, and so during raid disk deletion driver is not calling scsi_remove_target() API as driver observes starget field of raid_device's structure as NULL. Signed-off-by:
Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Fixes: 7786ab6a ("mpt3sas: Ported WarpDrive product SSS6200 support") Signed-off-by:
-
Bill Kuzeja authored
commit a5dd506e upstream. A system can get hung task timeouts if a qlogic board fails during initialization (if the board breaks again or fails the init). The hang involves the scsi scan. In a nutshell, since commit beb9e315 ("qla2xxx: Prevent removal and board_disable race"): ...it is possible to have freed ha (base_vha->hw) early by a call to qla2x00_remove_one when pdev->enable_cnt equals zero: if (!atomic_read(&pdev->enable_cnt)) { scsi_host_put(base_vha->host); kfree(ha); pci_set_drvdata(pdev, NULL); return; Almost always, the scsi_host_put above frees the vha structure (attached to the end of the Scsi_Host we're putting) since it's the last put, and life is good. However, if we are entering this routine because the adapter has broken sometime during initialization AND a scsi scan is already in progress (and has done its own scsi_host_get), vha will not be freed. What's worse, the scsi scan will access the freed ha structure through qla2xxx_scan_finished: if (time > vha->hw->loop_reset_delay * HZ) return 1; The scsi scan keeps checking to see if a scan is complete by calling qla2xxx_scan_finished. There is a timeout value that limits the length of time a scan can take (hw->loop_reset_delay, usually set to 5 seconds), but this definition is in the data structure (hw) that can get freed early. This can yield unpredictable results, the worst of which is that the scsi scan can hang indefinitely. This happens when the freed structure gets reused and loop_reset_delay gets overwritten with garbage, which the scan obliviously uses as its timeout value. The fix for this is simple: at the top of qla2xxx_scan_finished, check for the UNLOADING bit in the vha structure (_vha is not freed at this point). If UNLOADING is set, we exit the scan for this adapter immediately. After this last reference to the ha structure, we'll exit the scan for this adapter, and continue on. This problem is hard to hit, but I have run into it doing negative testing many times now (with a test specifically designed to bring it out), so I can verify that this fix works. My testing has been against a RHEL7 driver variant, but the bug and patch are equally relevant to to the upstream driver. Fixes: beb9e315 ("qla2xxx: Prevent removal and board_disable race") Signed-off-by:
Bill Kuzeja <william.kuzeja@stratus.com> Acked-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Lorenzo Bianconi authored
commit d304286a upstream. fix scale configuration/parsing for h3lis331dl accel driver when sensitivity is higher than 1(m/s^2)/digit Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Fixes: 1e52fefc ("iio: accel: Add support for the h3lis331dl accelerometer") Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Song Hongyan authored
commit 8af644a7 upstream. This fix makes newer ISH hubs work. Previous ones worked by lucky coincidence. Rotation sensor function does not work due to miss PM function. Add common hid sensor iio pm function for rotation sensor. Further clarification from Srinivas: If CONFIG_PM is not defined, then this prevents this sensor to function. So above commit caused this. This sensor was supposed to be always on to trigger wake up in prior external hubs. But with the new ISH hub this is not the case. Signed-off-by:
Song Hongyan <hongyan.song@intel.com> Fixes: 2b89635e ("iio: hid_sensor_hub: Common PM functions") Signed-off-by:
-
Song Hongyan authored
commit 6f77199e upstream. While testing, it was observed that on some platforms the scale value from iio sysfs for gyroscope is always 0 (E.g. Yoga 260). This results in the final angular velocity component values to be zeros. This is caused by insufficient precision of scale value displayed in sysfs. If the precision is changed to nano from current micro, then this is sufficient to display the scale value on this platform. Since this can be a problem for all other HID sensors, increase scale precision of all HID sensors to nano from current micro. Results on Yoga 260: name scale before scale now -------------------------------------------- gyro_3d 0.000000 0.000000174 als 0.001000 0.001000000 magn_3d 0.000001 0.000001000 accel_3d 0.000009 0.000009806 Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
Oliver Neukum authored
commit 7309aa84 upstream. variable struct usb_cdc_parsed_header h may be used uninitialized in acm_probe. In kernel 4.8. /* handle quirks deadly to normal probing*/ if (quirks == NO_UNION_NORMAL) ... goto skip_normal_probe; } we bypass call to cdc_parse_cdc_header(&h, intf, buffer, buflen); but later use h in if (h.usb_cdc_country_functional_desc) { /* export the country data */ Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by:
Victor Sologoubov <victor0@rambler.ru> Signed-off-by:
-
Scott Wood authored
commit 7c1c5413 upstream. The boot-time frequency of a CPU is considered its rated maximum, as we have no other source of such information. However, this was previously only used for chips with 80% restrictions on secondary PLLs. This usually wasn't a problem because most chips/configs boot with a divider of /1, with other dividers being used only for dynamic frequency reduction. However, at least one config (LS1021A at less than 1 GHz) uses a different divider for top speed. This was causing cpufreq to set a frequency beyond the chip's rated speed. This is fixed by applying a 100%-of-initial-speed limit to all CPU PLLs, similar to the existing 80% limit that only applied to some. Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Azael Avalos authored
commit 1c80e960 upstream. Bug 150611 uncovered that the WMI ID used by the toshiba-wmi driver is not Toshiba specific, and as such, the driver was being loaded on non Toshiba laptops too. This patch adds a DMI matching list checking for TOSHIBA as the vendor, refusing to load if it is not. Also the WMI GUID was renamed, dropping the TOSHIBA_ prefix, to better reflect that such GUID is not a Toshiba specific one. Signed-off-by:
Azael Avalos <coproscefalo@gmail.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Richard Weinberger authored
commit d8e9e5e8 upstream. Don't pass a size larger than iov_len to kernel_sendmsg(). Otherwise it will cause a NULL pointer deref when kernel_sendmsg() returns with rv < size. DRBD as external module has been around in the kernel 2.4 days already. We used to be compatible to 2.4 and very early 2.6 kernels, we used to use rv = sock_sendmsg(sock, &msg, iov.iov_len); then later changed to rv = kernel_sendmsg(sock, &msg, &iov, 1, size); when we should have used rv = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); tcp_sendmsg() used to totally ignore the size parameter. 57be5bda ip: convert tcp_sendmsg() to iov_iter primitives changes that, and exposes our long standing error. Even with this error exposed, to trigger the bug, we would need to have an environment (config or otherwise) causing us to not use sendpage() for larger transfers, a failing connection, and have it fail "just at the right time". Apparently that was unlikely enough for most, so this went unnoticed for years. Still, it is known to trigger at least some of these, and suspected for the others: [0] http://lists.linbit.com/pipermail/drbd-user/2016-July/023112.html [1] http://lists.linbit.com/pipermail/drbd-dev/2016-March/003362.html [2] https://forums.grsecurity.net/viewtopic.php?f=3&t=4546 [3] https://ubuntuforums.org/showthread.php?t=2336150 [4] http://e2.howsolveproblem.com/i/1175162/ This should go into 4.9, and into all stable branches since and including v4.0, which is the first to contain the exposing change. It is correct for all stable branches older than that as well (which contain the DRBD driver; which is 2.6.33 and up). It requires a small "conflict" resolution for v4.4 and earlier, with v4.5 we dropped the comment block immediately preceding the kernel_sendmsg(). Fixes: b411b363 ("The DRBD driver") Cc: viro@zeniv.linux.org.uk Cc: christoph.lechleitner@iteg.at Cc: wolfgang.glas@iteg.at Reported-by:
Christoph Lechleitner <christoph.lechleitner@iteg.at> Tested-by:
Richard Weinberger <richard@nod.at> [changed oneliner to be "obvious" without context; more verbose message] Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Felipe Balbi authored
commit fd9afd3c upstream. According to Dave Miller "the networking stack has a hard requirement that all SKBs which are transmitted must have their completion signalled in a fininte amount of time. This is because, until the SKB is freed by the driver, it holds onto socket, netfilter, and other subsystem resources." In summary, this means that using TX IRQ throttling for the networking gadgets is, at least, complex and we should avoid it for the time being. Reported-by:
David Miller <davem@davemloft.net> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Johan Hovold authored
commit 18266403 upstream. The TIOCMIWAIT implementation would return -EINVAL if any of the three supported signals were included in the mask. Instead of returning an error in case TIOCM_CTS is included, simply drop the mask check completely, which is in accordance with how other drivers implement this ioctl. Fixes: 5a6a62bd ("cdc-acm: add TIOCMIWAIT") Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
-
Vivek Gautam authored
commit 9b9d7cdd upstream. Fixing the sequence of events in dwc3_core_init() error exit path. dwc3_core_exit() call is also removed from the error path since, whatever it's doing is already done. Fixes: c499ff71 usb: dwc3: core: re-factor init and exit paths Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by:
Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by:
-
Marc Dietrich authored
commit 68fae2f3 upstream. This basicly reverts commit e534f3e9 (staging:nvec: Introduce the use of the managed version of kzalloc). Serio struct should never by managed because it is refcounted. Doing so will lead to a double free oops on module remove. Signed-off-by:
Marc Dietrich <marvin24@gmx.de> Fixes: e534f3e9 ("staging:nvec: Introduce the use of the managed version of kzalloc") Signed-off-by:
-
Paul Fertser authored
commit 17c1c9ba upstream. This reverts commit 36b30d61. This is necessary to detect paz00 (ac100) touchpad properly as one speaking ETPS/2 protocol. Without it X.org's synaptics driver doesn't work as the touchpad is detected as an ImPS/2 mouse instead. Commit ec6184b1 changed the way auto-detection is performed on ports marked as pass through and made the issue apparent. A pass through port is an additional PS/2 port used to connect a slave device to a master device that is using PS/2 to communicate with the host (so slave's PS/2 communication is tunneled over master's PS/2 link). "Synaptics PS/2 TouchPad Interfacing Guide" describes such a setup (PS/2 PASS-THROUGH OPTION section). Since paz00's embedded controller is not connected to a PS/2 port itself, the PS/2 interface it exposes is not a pass-through one. Signed-off-by:
Paul Fertser <fercerpav@gmail.com> Acked-by:
-
Paul Fertser authored
commit d8f8a74d upstream. This command was sent behind serio's back and the answer to it was confusing atkbd probe function which lead to the elantech touchpad getting detected as a keyboard. To prevent this from happening just let every party do its part of the job. Signed-off-by:
-
Ian Abbott authored
commit 55abe816 upstream. `ni_tio_clock_period_ps()` used to return the clock period in picoseconds, and had a `BUG()` call for invalid cases. It was changed to pass the clock period back via a pointer parameter and return an error for the invalid cases. Unfortunately the code to handle user-specified clock sources with user-specified clock period is still returning the clock period the old way, which can lead to the caller not getting the clock period, or seeing an unexpected error. Fix it by passing the clock period via the pointer parameter and returning `0`. Fixes: b42ca86a ("staging: comedi: ni_tio: remove BUG() checks for ni_tio_get_clock_src()") Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Huacai Chen authored
commit 33c027ae upstream. Early commit 30ca5cb6 ("staging: sm750fb: change definition of PANEL_PLANE_TL fields") and 27b047bb ("staging: sm750fb: change definition of PANEL_PLANE_BR fields") modify the register bit fields definitions. But the modifications are wrong, because the bit mask of "bit field 10:0" is not 0xeff, but 0x7ff. The wrong definition bugs makes display very strange. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
Arnd Bergmann authored
commit 34eee70a upstream. The ad5933_i2c_read function returns an error code to indicate whether it could read data or not. However ad5933_work() ignores this return code and just accesses the data unconditionally, which gets detected by gcc as a possible bug: drivers/staging/iio/impedance-analyzer/ad5933.c: In function 'ad5933_work': drivers/staging/iio/impedance-analyzer/ad5933.c:649:16: warning: 'status' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds minimal error handling so we only evaluate the data if it was correctly read. Link: https://patchwork.kernel.org/patch/8110281/Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Ulf Hansson authored
commit fe1b5700 upstream. In the eMMC 4.51 version of the spec, an EXT_CSD field called GENERIC_CMD6_TIME[248] was added. This allows cards to specify the maximum time it may need to move out from its busy state, when a CMD6 command has been sent. In cases when the card is compliant to versions < 4.51 of the eMMC spec, obviously the core needs to use a fall-back value for this timeout, which currently is set to 10 minutes. This value is completely in the wrong range and importantly in some cases it causes a card initialization to take more than 10 minute to complete. Earlier this scenario was avoided as the mmc core used CMD13 to poll the card, to find out when it stopped signaling busy. Commit 08573eaf ("mmc: mmc: do not use CMD13 to get status after speed mode switch") changed this behavior. Instead of reverting that commit, which would cause other issues, let's instead start by picking a simple solution for the problem, by using a 500ms default generic CMD6 timeout. The reason for using exactly 500ms, comes from observations that shows it's quite common for cards to specify 250ms. 500ms is two times that value so likely it should be enough for most cards. Fixes: 08573eaf ("mmc: mmc: do not use CMD13 to get status after speed mode switch") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Tested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Adrian Hunter authored
commit 69b962a6 upstream. In the busy response case (i.e. !host->data), an unexpected data interrupt would result in clearing the data command as though it had completed but without informing the upper layers and thus resulting in a hang. Fix by only clearing the data command for data interrupts that are expected. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Adrian Hunter authored
commit 6ebebeab upstream. CMD line reset during an ongoing data transfer can cause the data transfer to hang. Fix by delaying the reset until the data transfer is finished. Signed-off-by:
-
Laura Abbott authored
commit c25badc9 upstream. When converting to a shared library in ac5a181d ("cpupower: Add cpuidle parts into library"), cpu_freq_cpu_exists() was converted to cpupower_is_cpu_online(). cpu_req_cpu_exists() returned 0 on success and -ENOSYS on failure whereas cpupower_is_cpu_online returns 1 on success. Check for the correct return value in cpufreq-set. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1374212 Fixes: ac5a181d (cpupower: Add cpuidle parts into library) Reported-by:
Julian Seward <jseward@acm.org> Signed-off-by:
Laura Abbott <labbott@redhat.com> Acked-by:
Thomas Renninger <trenn@suse.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Mika Westerberg authored
commit d2cdf5dc upstream. When the system is suspended to S3 the BIOS might re-initialize certain GPIO pins back to their original state or it may re-program interrupt mask of others. For example Acer TravelMate B116-M had BIOS bug where certain GPIO pin (MF_ISH_GPIO_5) was programmed to trigger on high level, and the pin state was high once the BIOS gave control to the OS on resume. This triggers lots of messages like: irq 117, desc: ffff88017a61e600, depth: 1, count: 0, unhandled: 0 ->handle_irq(): ffffffff8109b613, handle_bad_irq+0x0/0x1e0 ->irq_data.chip(): ffffffffa0020180, chv_pinctrl_exit+0x2d84/0x12 [pinctrl_cherryview] ->action(): (null) IRQ_NOPROBE set We reset the mask back to known state in chv_pinctrl_resume() but that is called only after device interrupts have already been enabled. Now, this particular issue was fixed by upgrading the BIOS to the latest (v1.23) but not everybody upgrades their BIOSes so we fix it up in the driver as well. Prevent the possible interrupt storm by moving suspend and resume hooks to be called at _noirq time instead. Since device interrupts are still disabled we can restore the mask back to known state before interrupt storm happens. Reported-by:
Christian Steiner <christian.steiner@outlook.de> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Mika Westerberg authored
commit 56211121 upstream. If async suspend is enabled, the driver may access registers concurrently with another instance which may fail because of the bug in Cherryview GPIO hardware. Prevent this by taking the shared lock while accessing the hardware in suspend and resume hooks. Signed-off-by:
-
Alexey Brodkin authored
commit a79a8121 upstream. We used to use generic implementation of dma_map_ops.mmap which is dma_common_mmap() but that only worked for simpler cached mappings when vaddr = paddr. If a driver requests uncached DMA buffer kernel maps it to virtual address so that MMU gets involved and page uncached status takes into account. In that case usage of dma_common_mmap() lead to mapping of vaddr to vaddr for user-space which is obviously wrong. For more detals please refer to verbose explanation here [1]. So here we implement our own version of mmap() which always deals with dma_addr and maps underlying memory to user-space properly (note that DMA buffer mapped to user-space is always uncached because there's no way to properly manage cache from user-space). [1] https://lkml.org/lkml/2016/10/26/973Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 16d917b1 upstream. If we're using a shadow copy of a PCI device ROM, the shadow copy is in RAM and the device never sees accesses to it and doesn't respond to it. We don't have to route the shadow range to the PCI device, and the device doesn't have to claim the range. Previously we treated the shadow copy as though it were the ROM BAR, and we failed to claim it because the region wasn't routed to the device: pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci_bus 0000:01: Allocating resources pci 0000:01:00.0: can't claim BAR 6 [mem 0x000c0000-0x000dffff]: no compatible bridge window The failure path of pcibios_allocate_dev_rom_resource() cleared out the resource start address, which also caused the following ioremap() warning: WARNING: CPU: 0 PID: 116 at /build/linux-akdJXO/linux-4.8.0/arch/x86/mm/ioremap.c:121 __ioremap_caller+0x1ec/0x370 ioremap on RAM at 0x0000000000000000 - 0x000000000001ffff Handle an option ROM shadow copy as RAM, without trying to insert it into the iomem resource tree. This fixes a regression caused by 0c0e0736 ("PCI: Set ROM shadow location in arch code, not in PCI core"), which appeared in v4.6. The regression causes video device initialization to fail. This was reported on AMD Turks, but it likely affects others as well. Fixes: 0c0e0736 ("PCI: Set ROM shadow location in arch code, not in PCI core") Reported-and-tested-by:
Vecu Bosseur <vecu.bosseur@gmail.com> Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1627496 Link: https://bugzilla.kernel.org/show_bug.cgi?id=175391 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1352272Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
