- 10 Apr, 2008 1 commit
-
-
David S. Miller authored
1) ptrace should pass 'current' to task_user_regset_view() 2) When fetching general registers using a 64-bit view, and the target is 32-bit, we have to convert. 3) Skip the whole register window get/set code block if the user isn't asking to access anything in there. Otherwise we have problems if the user doesn't have an address space setup. Fetching ptrace register is still valid at such a time, and ptrace does not try to access the register window area of the regset. Signed-off-by:David S. Miller <davem@davemloft.net>
-
- 03 Apr, 2008 2 commits
-
-
David S. Miller authored
If target is not current we need to use access_process_vm(). Noticed by Roland McGrath. Signed-off-by: -
David S. Miller authored
The calculation of the FPU reg save area pointer was wrong. Based upon an OOPS report from Tom Callaway. Signed-off-by:
-
- 28 Mar, 2008 37 commits
-
-
FUJITA Tomonori authored
Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
FUJITA Tomonori authored
Some IOMMUs allocate memory areas spanning LLD's segment boundary limit. It forces low level drivers to have a workaround to adjust scatter lists that the IOMMU builds. We are in the process of making all the IOMMUs respect the segment boundary limits to remove such work around in LLDs. SPARC64 IOMMUs were rewritten to use the IOMMU helper functions and the commit 89c94f2f made the IOMMUs not allocate memory areas spanning the segment boundary limit. However, SPARC64 IOMMUs allocate memory areas first then try to merge them (while some IOMMUs walk through all the sg entries to see how they can be merged first and allocate memory areas). So SPARC64 IOMMUs also need the boundary limit checking when they try to merge sg entries. Signed-off-by:
-
David S. Miller authored
Noticed by Andrew Morton. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: [PATCH] mnt_expire is protected by namespace_sem, no need for vfsmount_lock [PATCH] do shrink_submounts() for all fs types [PATCH] sanitize locking in mark_mounts_for_expiry() and shrink_submounts() [PATCH] count ghost references to vfsmounts [PATCH] reduce stack footprint in namespace.c
-
Jesper Juhl authored
The Coverity checker spotted that we leak the storage allocated to 'name' in int driver_add_kobj(). The leak looks legit to me - this is the code : int driver_add_kobj(struct device_driver *drv, struct kobject *kobj, const char *fmt, ...) { va_list args; char *name; int ret; va_start(args, fmt); name = kvasprintf(GFP_KERNEL, fmt, args); ^^^^^^^^ This dynamically allocates space... va_end(args); if (!name) return -ENOMEM; return kobject_add(kobj, &drv->p->kobj, "%s", name); ^^^^^^^^ This neglects to free the space allocated } Inside kobject_add() a copy of 'name' will be made and used. As far as I can see, Coverity is correct in flagging this as a leak, but I'd like some configmation before the patch is applied. This should fix it. Signed-off-by:Jesper Juhl <jesper.juhl@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alasdair G Kergon authored
write_err is an unsigned long used with set_bit() so should not be passed around as unsigned int. http://bugzilla.kernel.org/show_bug.cgi?id=10271Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Andrew Morton authored
drivers/memstick/host/tifm_ms.c: In function 'tifm_ms_data_event': drivers/memstick/host/tifm_ms.c:185: warning: 'p_off' may be used uninitialized in this function Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by:
-
Anton Vorontsov authored
# reboot ... [ 42.351266] Flash device refused suspend due to active operation (state 0) [ 42.358195] Unable to handle kernel NULL pointer dereference at virtual address 00000078 [ 42.360060] pgd = c7d9c000 [ 42.362769] [00000078] *pgd=a7d8d031, *pte=00000000, *ppte=00000000 [ 42.372902] Internal error: Oops: 17 [#1] [ 42.376911] Modules linked in: [ 42.379980] CPU: 0 Not tainted (2.6.25-rc2-10642-ge8f2594-dirty #73) [ 42.380000] PC is at physmap_flash_shutdown+0x28/0x54 ... [ 42.380000] Backtrace: [ 42.380000] [<c0130c1c>] (physmap_flash_shutdown+0x0/0x54) from [<c01207c0>] (platform_drv_shutdown+0x20/0x24) [ 42.380000] r5:28121969 r4:c0229e08 [ 42.380000] [<c01207a0>] (platform_drv_shutdown+0x0/0x24) from [<c011cd40>] (device_shutdown+0x60/0x88) [ 42.380000] [<c011cce0>] (device_shutdown+0x0/0x88) from [<c003e8a4>] (kernel_restart_prepare+0x2c/0x3c) [ 42.380000] r4:00000000 [ 42.380000] [<c003e878>] (kernel_restart_prepare+0x0/0x3c) from [<c003ea00>] (kernel_restart+0x14/0x48) [ 42.380000] [<c003e9ec>] (kernel_restart+0x0/0x48) from [<c003fdc0>] (sys_reboot+0xe8/0x1f8) [ 42.380000] r4:01234567 [ 42.380000] [<c003fcd8>] (sys_reboot+0x0/0x1f8) from [<c001aa00>] (ret_fast_syscall+0x0/0x2c) [ 42.380000] r7:00000058 r6:00000004 r5:00000001 r4:00000000 [ 42.380000] Code: 0a000009 e7953004 e1a00003 e1a0e00f (e593f078) [ 42.650051] ---[ end trace 6d6c26a0fc3141de ]--- Segmentation fault INIT: no more processes left in this runlevel While looping for mtd[i]s, we should stop at the mtd[i] == NULL. This patch also removes unnecessary "if (info)" checks: suspend/resume/shutdown ops are executed only if probe() is succeeded, so info is guaranteed to be !NULL. Signed-off-by:
Anton Vorontsov <cbouatmailru@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Milan Broz authored
Fix regression in dm-crypt introduced in commit 3a7f6c99 ("dm crypt: use async crypto"). If write requests need to be split into pieces, the code must not process them in parallel because the crypto context cannot be shared. So there can be parallel crypto operations on one part of the write, but only one write bio can be processed at a time. This is not optimal and the workqueue code needs to be optimized for parallel processing, but for now it solves the problem without affecting the performance of synchronous crypto operation (most of current dm-crypt users). http://bugzilla.kernel.org/show_bug.cgi?id=10242 http://bugzilla.kernel.org/show_bug.cgi?id=10207Signed-off-by:
Milan Broz <mbroz@redhat.com> Signed-off-by:
-
Ananth N Mavinakayanahalli authored
Prasanna has taken a new job. Update the MAINTAINERS file Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by:
-
Michael Hennerich authored
blackfin video driver: fix bug when opening/reading/mmaping BF54x and BF52x framebuffer simultaneously http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3974 opening/reading/mmaping BF54x and BF52x framebuffer simultaneously triggers BUG: failure at mm/nommu.c:470/add_nommu_vma() Add VM_SHARED to the default vm_flags Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Bryan Wu authored
- Allocate pseudo_palette together with fbinfo - Code cleanup Signed-off-by:
-
Jean Delvare authored
This reverts commit 3c0a654e and fixes kernel bug #10245: http://bugzilla.kernel.org/show_bug.cgi?id=10245 The HP Compaq nc6120 has the same PCI sub-device ID as the nx6110, and the SMBus is used by ACPI for thermal management on the nc6120, so Linux should not attach a native driver to it. This means that this quirk is unsafe and has to be removed. I also added a comment to help developers realize that adding new IDs to this SMBus unhiding quirk table should be done only with great care, and in particular only after checking that ACPI is not making use of the SMBus. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Tomasz Koprowski <tomek@koprowski.org> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Christoph Hellwig authored
Neither of the headers actually compiles when included from userpsace nor should it be made available as userspace tools should be using the libraries or at least headers from e2fsprogs. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Harvey Harrison authored
Will replace open-coded variants elsewhere. Done in the same style as the 32-bit versions. Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John W. Linville <linville@tuxdriver.com> Cc: Joe Perches <joe@perches.com> Cc: Jiri Benc <jbenc@suse.cz> Signed-off-by:
-
Alessandro Zummo authored
The following patch allows ixp4xx-beeper to be loaded by udev automatically when compiled as a module with kernel versions 2.4.24 and greater. This patch is required because 43cc71ee ("platform: prefix MODALIAS with "platform:"") changed the modalias string to have the extra prefix. LKG7102D7:~# udevinfo -a -p /sys/devices/platform/ixp4xx-beeper.4 looking at device '/devices/platform/ixp4xx-beeper.4': KERNEL=="ixp4xx-beeper.4" SUBSYSTEM=="platform" DRIVER=="" ATTR{modalias}=="platform:ixp4xx-beeper" udev therefore tries to modprobe platform:ixp4xx-beeper instead of ixp4xx-beeper. LKG7102D7:~# udevtest /sys/devices/platform/ixp4xx-beeper.4 ... import_uevent_var: import into environment: 'PHYSDEVBUS=platform' import_uevent_var: import into environment: 'MODALIAS=platform:ixp4xx-beeper' main: looking at device '/devices/platform/ixp4xx-beeper.4' from subsystem 'platform' wait_for_sysfs: file '/sys/devices/platform/ixp4xx-beeper.4/bus' appeared after 0 loops main: run: 'socket:/org/kernel/udev/monitor' main: run: '/sbin/modprobe --use-blacklist platform:ixp4xx-beeper' With this patch, depmod adds an alias line (see below) to modules.alias which allows modprobe to load the right module. alias platform:ixp4xx-beeper ixp4xx-beeper Signed-off-by:
Gordon Farquharson <gordonfarquharson@gmail.com> Signed-off-by:
Alessandro Zummo <a.zummo@towertech.it> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Andy Whitcroft authored
This version brings proper quote tracking across lines, and brings the handling of comments into the same mechanism ensuring nesting is correctly handled. It brings the usual flurry of fixes for false positives. It also brings a number of new checks. The most contentious change will likely be the checks for NR_CPUS as this throws some new warnings in kernel/sched.c. Of note: - all new quote tracking across lines - all new comment tracking - new more direct, less ambigious wording for some warnings - recommends mutexes and completions over semaphores - recommends strict_strto* over simple_strto* - report on direct use of NR_CPUS Andy Whitcroft (22): Version: 0.16 string quote tracking should cross line boundaries check spacing round -> correctly across newlines checks for linux/ against asm/ include files should be warnings standardise on 'required' and 'prohibited' take the first end of condition when parsing statements values: cope with unbalanced brackets preprocessor #elif is not a function preprocessor #if should not trigger trailing statement checks test: allow us to limit output to a single error recommend real mutexes over semaphores asm checks should mirror those for __asm__ warn on semaphores being used in place of completions trailing ; on control structure should ignore do {} while (); recommend strict_strtoX over simple_strtoX redo comment handling as a quote type use of NR_CPUS is normally wrong consistant spacing should only be about spaces if brace check suppression should only apply to the top-levels use tr/// to align spacing for operators move to using four parameter form of substr check and report modifications to include/asm Signed-off-by:Andy Whitcroft <apw@shadowen.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Andrew Morton authored
Mar 23 09:06:31 opensuse103 kernel: Installing 9P2000 support Mar 23 09:06:31 opensuse103 kernel: sys_init_module: '9pnet_fd'->init suspiciously returned 1, it should follow 0/-E convention Mar 23 09:06:31 opensuse103 kernel: sys_init_module: loading module anyway... Mar 23 09:06:31 opensuse103 kernel: Pid: 5323, comm: modprobe Not tainted 2.6.25-rc6-git7-default #1 Mar 23 09:06:31 opensuse103 kernel: [<c013c253>] sys_init_module+0x172b/0x17c9 Mar 23 09:06:31 opensuse103 kernel: [<c0108a6a>] sys_mmap2+0x62/0x77 Mar 23 09:06:31 opensuse103 kernel: [<c01059c4>] sysenter_past_esp+0x6d/0xa9 Mar 23 09:06:31 opensuse103 kernel: ======================= Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@opteron.(none)> Cc: David S. Miller <davem@davemloft.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <devzero@web.de> Signed-off-by:
-
Dave Jones authored
Silence two kerneldoc warnings. Warning(kernel/audit.c:1276): No description found for parameter 'string' Warning(kernel/audit.c:1276): No description found for parameter 'len' [also fix a typo for bonus points] Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Acked-by:
-
Sven Schnelle authored
kafs doesn't check if the cell already exists - so if you do an echo "add newcell.org 1.2.3.4" >/proc/fs/afs/cells it will try to create this cell again. kobject will also complain about a double registration. To prevent such problems, return -EEXIST in that case. Signed-off-by:
Sven Schnelle <svens@stackframe.org> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
Add a MAINTAINERS record for AFS. Signed-off-by:
-
Dmitri Monakhov authored
Current nobh_write_end() implementation ignore partial writes(copied < len) case if page was fully mapped and simply mark page as Uptodate, which is totally wrong because area [pos+copied, pos+len) wasn't updated explicitly in previous write_begin call. It simply contains garbage from pagecache and result in data leakage. #TEST_CASE_BEGIN: ~~~~~~~~~~~~~~~~ In fact issue triggered by classical testcase open("/mnt/test", O_RDWR|O_CREAT|O_TRUNC, 0666) = 3 ftruncate(3, 409600) = 0 writev(3, [{"a", 1}, {NULL, 4095}], 2) = 1 ##TESTCASE_SOURCE: ~~~~~~~~~~~~~~~~~ #include <stdio.h> #include <stdlib.h> #include <fcntl.h> #include <sys/uio.h> #include <sys/mman.h> #include <errno.h> int main(int argc, char **argv) { int fd, ret; void* p; struct iovec iov[2]; fd = open(argv[1], O_RDWR|O_CREAT|O_TRUNC, 0666); ftruncate(fd, 409600); iov[0].iov_base="a"; iov[0].iov_len=1; iov[1].iov_base=NULL; iov[1].iov_len=4096; ret = writev(fd, iov, sizeof(iov)/sizeof(struct iovec)); printf("writev = %d, err = %d\n", ret, errno); return 0; } ##TESTCASE RESULT: ~~~~~~~~~~~~~~~~~~ [root@ts63 ~]# mount | grep mnt2 /dev/mapper/test on /mnt2 type ext2 (rw,nobh) [root@ts63 ~]# /tmp/writev /mnt2/test writev = 1, err = 0 [root@ts63 ~]# hexdump -C /mnt2/test 00000000 61 65 62 6f 6f 74 00 00 f0 b9 b4 59 3a 00 00 00 |aeboot.....Y:...| 00000010 20 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00 | .......!.......| 00000020 df df df df df df df df df df df df df df df df |................| 00000030 3a 00 00 00 2a 00 00 00 21 00 00 00 00 00 00 00 |:...*...!.......| 00000040 60 c0 8c 00 00 00 00 00 40 4a 8d 00 00 00 00 00 |`.......@J......| 00000050 00 00 00 00 00 00 00 00 41 00 00 00 00 00 00 00 |........A.......| 00000060 74 69 6d 65 20 64 64 20 69 66 3d 2f 64 65 76 2f |time dd if=/dev/| 00000070 6c 6f 6f 70 30 20 20 6f 66 3d 2f 64 65 76 2f 6e |loop0 of=/dev/n| skip.. 00000f50 00 00 00 00 00 00 00 00 31 00 00 00 00 00 00 00 |........1.......| 00000f60 6d 6b 66 73 2e 65 78 74 33 20 2f 64 65 76 2f 76 |mkfs.ext3 /dev/v| 00000f70 7a 76 67 2f 74 65 73 74 20 2d 62 34 30 39 36 00 |zvg/test -b4096.| 00000f80 a0 fe 8c 00 00 00 00 00 21 00 00 00 00 00 00 00 |........!.......| 00000f90 23 31 32 30 35 39 35 30 34 30 34 00 3a 00 00 00 |#1205950404.:...| 00000fa0 20 00 8d 00 00 00 00 00 21 00 00 00 00 00 00 00 | .......!.......| 00000fb0 d0 cf 8c 00 00 00 00 00 10 d0 8c 00 00 00 00 00 |................| 00000fc0 00 00 00 00 00 00 00 00 41 00 00 00 00 00 00 00 |........A.......| 00000fd0 6d 6f 75 6e 74 20 2f 64 65 76 2f 76 7a 76 67 2f |mount /dev/vzvg/| 00000fe0 74 65 73 74 20 20 2f 76 7a 20 2d 6f 20 64 61 74 |test /vz -o dat| 00000ff0 61 3d 77 72 69 74 65 62 61 63 6b 00 00 00 00 00 |a=writeback.....| 00001000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| As you can see file's page contains garbage from pagecache instead of zeros. #TEST_CASE_END Attached patch: - Add sanity check BUG_ON in order to prevent incorrect usage by caller, This is function invariant because page can has buffers and in no zero *fadata pointer at the same time. - Always attach buffers to page is it is partial write case. - Always switch back to generic_write_end if page has buffers. This is reasonable because if page already has buffer then generic_write_begin was called previously. Signed-off-by:Dmitri Monakhov <dmonakhov@openvz.org> Reviewed-by:
Nick Piggin <npiggin@suse.de> Cc: <stable@kernel.org> Signed-off-by:
-
YAMAMOTO Takashi authored
Call mm_free_cgroup earlier. Otherwise a reference due to lazy mm switching can prevent cgroup removal. Signed-off-by:
YAMAMOTO Takashi <yamamoto@valinux.co.jp> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Jonathan Corbet authored
Discourage people from inappropriately using in_atomic() Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Andrew Morton authored
drivers/char/drm/ati_pcigart.c: In function 'drm_ati_pcigart_init': drivers/char/drm/ati_pcigart.c:125: warning: format '%08X' expects type 'unsigned int', but argument 3 has type 'dma_addr_t' Cc: Dave Airlie <airlied@linux.ie> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Sebastian Siewior authored
This has been forgotten in commit f5bbdacc ("[MTD] NAND Modularize read function") and nobody compiled the driver. Signed-off-by:
Sebastian Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joern Engel <joern@wh.fh-wedel.de> Signed-off-by:
-
Andrew Morton authored
I believe http://bugzilla.kernel.org/show_bug.cgi?id=10318 is a false positive. There's no way in which networking will be using highmem pages here, so it won't be taking the KM_USER0 kmap slot, so there's no point in performing these checks. Cc: Pawel Staszewski <pstaszewski@artcom.pl> Cc: Ingo Molnar <mingo@elte.hu> Acked-by:
Christoph Lameter <clameter@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Roland Dreier authored
Because of a typo in iwch_accept_cr(), the cxgb3 connection handling code programs the hardware IRD (incoming RDMA read queue depth) with the value that is passed in for the ORD (outgoing RDMA read queue depth). In particular this means that if an application passes in IRD > 0 and ORD = 0 (which is a completely sane and valid thing to do for an app that expects only incoming RDMA read requests), then the hardware will end up programmed with IRD = 0 and the app will fail in a mysterious way. Fix this by using "ep->ird" instead of "ep->ord" in the intended place. Signed-off-by:
Roland Dreier <rolandd@cisco.com> Acked-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix missed hardware breakpoints across multiple threads
-
Ingo Molnar authored
Revert commit 1192aeb9 ("ACPI: drivers/acpi: elide a non-zero test on a result that is never 0") because it turns out that thermal_cooling_device_register() does actually return NULL if CONFIG_THERMAL is turned off (then the routine turns into a dummy inline routine in the header files that returns NULL unconditionally). This was found with randconfig testing, causing a crash during bootup: initcall 0x78878534 ran for 13 msecs: acpi_button_init+0x0/0x51() Calling initcall 0x78878585: acpi_fan_init+0x0/0x2c() BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd *pde = 00000000 Oops: 0000 [#1] Modules linked in: Pid: 1, comm: swapper Not tainted (2.6.25-rc7-sched-devel.git-x86-latest.git #14) EIP: 0060:[<782b8ad0>] EFLAGS: 00010246 CPU: 0 EIP is at acpi_fan_add+0x7d/0xfd EAX: b787c718 EBX: b787c400 ECX: b782ceb4 EDX: 00000007 ESI: 00000000 EDI: b787c6f4 EBP: b782cee0 ESP: b782cecc DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process swapper (pid: 1, ti=b782c000 task=b7846000 task.ti=b782c000) Stack: b787c459 00000000 b787c400 78790888 b787c60c b782cef8 782b6fb8 ffffffda b787c60c 00000000 78790958 b782cf0c 783005d7 b787c60c 78790958 78790584 b782cf1c 783007f6 b782cf28 00000000 b782cf40 782ffc4a 78790958 b794d558 Call Trace: [<782b6fb8>] ? acpi_device_probe+0x3e/0xdb [<783005d7>] ? driver_probe_device+0x82/0xfc [<783007f6>] ? __driver_attach+0x3a/0x70 [<782ffc4a>] ? bus_for_each_dev+0x3e/0x60 [<7830048c>] ? driver_attach+0x14/0x16 [<783007bc>] ? __driver_attach+0x0/0x70 [<7830006a>] ? bus_add_driver+0x9d/0x1b0 [<783008c3>] ? driver_register+0x47/0xa3 [<7813db00>] ? timespec_to_ktime+0x9/0xc [<782b7331>] ? acpi_bus_register_driver+0x3a/0x3c [<78878592>] ? acpi_fan_init+0xd/0x2c [<78863656>] ? kernel_init+0xac/0x1f9 [<788635aa>] ? kernel_init+0x0/0x1f9 [<78114563>] ? kernel_thread_helper+0x7/0x10 ======================= Code: 6e 78 e8 57 44 e7 ff 58 e9 93 00 00 00 8b 55 f0 8d bb f4 02 00 00 80 4b 2d 10 8b 03 e8 87 cb ff ff 8d 83 18 03 00 00 80 63 2d ef <ff> 35 00 00 00 00 50 68 e8 9c 6e 78 e8 22 44 e7 ff b9 b6 9c 6e EIP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd SS:ESP 0068:b782cecc ---[ end trace 778e504de7e3b1e3 ]--- Kernel panic - not syncing: Attempted to kill init! Signed-off-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Michael Ellerman authored
There is a bug in the powerpc DABR (data access breakpoint) handling, which can result in us missing breakpoints if several threads are trying to break on the same address. The circumstances are that do_page_fault() calls do_dabr(), this clears the DABR (sets it to 0) and sets up the signal which will report to userspace that the DABR was hit. The do_signal() code will restore the DABR value on the way out to userspace. If we reschedule before calling do_signal(), __switch_to() will check the cached DABR value and compare it to the new thread's value, if they match we don't set the DABR in hardware. So if two threads have the same DABR value, and we schedule from one to the other after taking the interrupt for the first thread hitting the DABR, the second thread will run without the DABR set in hardware. The cleanest fix is to move the cache update into set_dabr(), that way we can't forget to do it. Reported-by:
Jan Kratochvil <jan.kratochvil@redhat.com> Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Linus Torvalds authored
This reverts commit 3811dbf6. The masking was not at all useless, and it was sensible. We handle GFP_ZERO in the caller, and passing it down to any page allocator logic is buggy and wrong. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: comment documentation update. lguest: Don't need comment terminator before disk section. lguest: lguest.txt documentation fix lguest: Add puppies which where previously missing. virtio_pci: unregister virtio device at device remove
-
Al Viro authored
Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
... and take it out of ->umount_begin() instances. Call with all locks already taken (by do_umount()) and leave calling release_mounts() to caller (it will do release_mounts() anyway, so we can just put into the same list). Signed-off-by: -
Al Viro authored
... and fix a race on access of ->mnt_share et.al. without namespace_sem in the latter. Signed-off-by: -
Al Viro authored
make propagate_mount_busy() exclude references from the vfsmounts that had been isolated by umount_tree() and are just waiting for release_mounts() to dispose of their ->mnt_parent/->mnt_mountpoint. Signed-off-by:
-
