- 06 Jun, 2017 5 commits
-
-
Devin Heitmueller authored
The recent changes in 4.9 to mandate USB buffers be heap allocated broke this driver, which was allocating the buffers on the stack. This resulted in the device failing at initialization. Introduce dedicated send/receive buffers as part of the state structure, and add a mutex to protect access to them. Note: we also had to tweak the API to mxl111sf_ctrl_msg to pass the pointer to the state struct rather than the device, since we need it inside the function to access the buffers and the mutex. This patch adjusts the callers to match the API change. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Reported-by:
Doug Lung <dlung0@gmail.com> Cc: Michael Ira Krufky <mkrufky@linuxtv.org> Cc: <stable@vger.kernel.org> # for v4.5 and up Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Songjun Wu authored
Sometimes 'DMA single access' is not enough to transfer a frame of image, '8-beat burst access' is set as the default DMA memory burst size. Signed-off-by:
Songjun Wu <songjun.wu@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Devin Heitmueller authored
Setting initial standard at the top of cx8800_initdev would cause the first call to cx88_set_tvnorm() to return without programming any registers (leaving the driver saying it's set to NTSC but the hardware isn't programmed). Even worse, any subsequent attempt to explicitly set it to NTSC-M will return success but actually fail to program the underlying registers unless first changing the standard to something other than NTSC-M. Set the initial standard later in the process, and make sure the field is zero at the beginning to ensure that the call always goes through. This regression was introduced in the following commit: commit ccd6f1d4 ("[media] cx88: move width, height and field to core struct") Author: Hans Verkuil <hans.verkuil@cisco.com> [media] cx88: move width, height and field to core struct Signed-off-by:
-
Hugues Fruchet authored
This V4L2 subdev driver enables Digital Camera Memory Interface (DCMI) of STMicroelectronics STM32 SoC series. Signed-off-by:
Yannick Fertre <yannick.fertre@st.com> Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Hugues Fruchet authored
This adds documentation of device tree bindings for the STM32 DCMI (Digital Camera Memory Interface). Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 19 May, 2017 26 commits
-
-
Mauro Carvalho Chehab authored
Without annotations, gcc 7.1 will complain. Signed-off-by: -
Mauro Carvalho Chehab authored
On this driver, it can fall through a switch. I tried to annotate it, in order to shut up a gcc warning, but that didn't work, as the logic there is somewhat complex. So, instead, let's just repeat the code. gcc should likely optimize it anyway, and this makes the code better readable, IMHO. Signed-off-by: -
Mauro Carvalho Chehab authored
Clearly, hsync and vsinc bool vars are part of the return logic on the second case of the switch. Annotate that, in order to shut up gcc warnings. Signed-off-by: -
Mauro Carvalho Chehab authored
There are two cases here that it does a switch fall through. Annotate it, in order to shut up gcc warnings. Signed-off-by: -
Mauro Carvalho Chehab authored
On two switches, this driver have unannotated switch fall through. in the first case, it falls through a return. On the second one, it prints undesired log messages on fall through. Solve that by copying the commands that it should be running. Gcc will very likely optimize it anyway, so this sholdn't be causing any harm, and shuts up gcc warnings. Signed-off-by: -
Mauro Carvalho Chehab authored
The atomisp currently produce hundreds of warnings when W=1. It is a known fact that this driver is currently in bad shape, and there are lot of things to be done here. We don't want to be bothered by those "minor" stuff for now, while the driver doesn't receive a major cleanup. So, disable those warnings. Signed-off-by: -
Mauro Carvalho Chehab authored
Gcc 7.1 complains that: drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c: In function 'mtk_vdec_pic_info_update': drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c:284:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^~~ Indeed, if debug is disabled, "ret" is never used. The best fix for it seems to make the fuction to return an error code. Signed-off-by: -
Mauro Carvalho Chehab authored
Gcc 7.1 complains about: drivers/media/platform/s5p-jpeg/jpeg-core.c: In function 's5p_jpeg_parse_hdr.isra.9': drivers/media/platform/s5p-jpeg/jpeg-core.c:1207:12: warning: 'width' may be used uninitialized in this function [-Wmaybe-uninitialized] result->w = width; ~~~~~~~~~~^~~~~~~ drivers/media/platform/s5p-jpeg/jpeg-core.c:1208:12: warning: 'height' may be used uninitialized in this function [-Wmaybe-uninitialized] result->h = height; ~~~~~~~~~~^~~~~~~~ Indeed the code would allow it to return a random value (although it shouldn't happen, in practice). So, explicitly set both to zero, just in case. Acked-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Avoid warnings like those: drivers/media/pci/ddbridge/ddbridge-core.c: In function 'dvb_input_detach': drivers/media/pci/ddbridge/ddbridge-core.c:787:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (input->fe) { ^ drivers/media/pci/ddbridge/ddbridge-core.c:792:2: note: here case 4: ^~~~ ... On several cases, it is just that gcc 7.1 is not capable of understanding the comment, but on other places, we need an annotation. Signed-off-by: -
Mauro Carvalho Chehab authored
When a REMOTE_KEY_PRESSED event happens, it does the right thing. However, if debug is enabled, it will print a bogus message warning that "key repeated". Fix it. Signed-off-by: -
Mauro Carvalho Chehab authored
The logic that handles CA_SET_PID is clearly missing a break: it prints that the command succeeded, but, due to the missing break, it would be returning -EOPNOTSUPP, as if the driver weren't supporting such ioctl. Signed-off-by: -
Mauro Carvalho Chehab authored
Right now, the driver is doing the right thing for PVC_ERRORCODE_UNKNOWN and PVC_ERRORCODE_INVALID_CONTROL: for both, it returns an error code (SAA_ERR_NOT_SUPPORTED). However, it is printing two error messages instead of one on those cases. Fix the logic. Signed-off-by: -
Mauro Carvalho Chehab authored
There's a missing break for VSB16 modulation logic, with would cause it to return -EINVAL, instead of handling it. Fix it. Signed-off-by: -
Arnd Bergmann authored
gcc-7 suggests that an expression using a bitwise not and a bitmask on a 'bool' variable is better written using boolean logic: drivers/media/rc/imon.c: In function 'imon_incoming_scancode': drivers/media/rc/imon.c:1725:22: error: '~' on a boolean expression [-Werror=bool-operation] ictx->pad_mouse = ~(ictx->pad_mouse) & 0x1; ^ drivers/media/rc/imon.c:1725:22: note: did you mean to use logical not? I agree. Fixes: 21677cfc ("V4L/DVB: ir-core: add imon driver") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Manny Vindiola authored
This is a patch to the atomisp_tpg.c file that fixes up a missing blank line warning found by the checkpatch.pl tool Signed-off-by:
Manny Vindiola <mannyv@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Dan Carpenter authored
We're putting the NUL terminators one space beyond where they belong. This doesn't show up in testing because all but the callers put a NUL in the correct place themselves. LOL. It causes a static checker warning about buffer overflows. Fixes: a49d2536 ("staging/atomisp: Add support for the Intel IPU v2") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
We should verify that "ix < max_len" before we test whether we have reached the NUL terminator. Fixes: a49d2536 ("staging/atomisp: Add support for the Intel IPU v2") Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
-
Hans de Goede authored
With gcc-7.1.1 I was getting the following compile error: error: ‘*’ in boolean context, suggest ‘&&’ instead The problem is the definition of CEIL_DIV: #define CEIL_DIV(a, b) ((b) ? ((a) + (b) - 1) / (b) : 0) Which when called as: CEIL_DIV(x, y * z) triggers this error, note we cannot do as the error suggests since b is evaluated multiple times. This commit fixes these compile errors. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Guru Das Srinagesh authored
Fix sparse warnings: "symbol not declared; should it be static?" Signed-off-by:
Guru Das Srinagesh <gurooodas@gmail.com> Signed-off-by:
-
Avraham Shukron authored
Fix for warnings reported by checkpatch.pl: - Multiline comment style - Bare "unsigned" - Missing blank line after declarations - Un-needed braces around single-statement branch Signed-off-by:
Avraham Shukron <avraham.shukron@gmail.com> Signed-off-by:
-
Avraham Shukron authored
Fix for error (not warnings) reported by checkpatch.pl Specifically: - missing whitespace around "=" and after "," - indentation with spaces instead of tabs - lines starting with a whitespace This patch does not affect the compiled code in any way. Signed-off-by:
-
Valentin Vidic authored
Fixes a sparse warning: drivers/staging/media/atomisp/platform/intel-mid/intel_mid_pcihelpers.c:35:5: warning: symbol 'qos' was not declared. Should it be static? Signed-off-by:
Valentin Vidic <Valentin.Vidic@CARNet.hr> Signed-off-by:
-
Avraham Shukron authored
Added "static" storage class to 4 not-declared functions Signed-off-by:
-
Fabrizio Perria authored
Fix checkpatch warning: removed unnecessary initialization of static variable "skip_fwload" to 0 in source atomisp_v4l2.c Signed-off-by:
Fabrizio Perria <fabrizio.perria@gmail.com> Signed-off-by:
-
Guru Das Srinagesh authored
Fixes sparse warning "dubious: x & !y" in logical expression. Signed-off-by:
-
Joe Perches authored
__printf validation adds format and argument validation. Fix the various broken format/argument mismatches. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
- 18 May, 2017 9 commits
-
-
Philipp Zabel authored
The below mentioned fix contains a small but severe bug, fix it to make the driver work again. Fixes: 3538aa6e ("[media] tc358743: fix register i2c_rd/wr functions") Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Arnd Bergmann authored
Fix a link error in this specific combination of config options: CONFIG_MEDIA_CEC_SUPPORT=y CONFIG_CEC_CORE=m CONFIG_MEDIA_CEC_NOTIFIER=y CONFIG_VIDEO_STI_HDMI_CEC=m CONFIG_DRM_STI=y drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_remove': sti_hdmi.c:(.text.sti_hdmi_remove+0x10): undefined reference to `cec_notifier_set_phys_addr' sti_hdmi.c:(.text.sti_hdmi_remove+0x34): undefined reference to `cec_notifier_put' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_connector_get_modes': sti_hdmi.c:(.text.sti_hdmi_connector_get_modes+0x4a): undefined reference to `cec_notifier_set_phys_addr_from_edid' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_probe': sti_hdmi.c:(.text.sti_hdmi_probe+0x204): undefined reference to `cec_notifier_get' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_connector_detect': sti_hdmi.c:(.text.sti_hdmi_connector_detect+0x36): undefined reference to `cec_notifier_set_phys_addr' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_disable': sti_hdmi.c:(.text.sti_hdmi_disable+0xc0): undefined reference to `cec_notifier_set_phys_addr' The version below seems to work, though I don't particularly like the IS_REACHABLE() addition since that can be confusing to users. Signed-off-by:
-
Christophe JAILLET authored
We should ensure that 'plane_no' is '< vb->num_planes' as done in 'vb2_plane_cookie' just a few lines below. Fixes: e23ccc0a ("[media] v4l: add videobuf2 Video for Linux 2 driver framework") Cc: stable@vger.kernel.org Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Wei Yongjun authored
Remove including <linux/version.h> that is not needed. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Yongjun authored
The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Fixes: 0f314f6c ("[media] rainshadow-cec: new RainShadow Tech HDMI CEC driver") Signed-off-by:
-
Petr Cvek authored
The conversion from soc_camera omitted a correct handling of the clock gating for a sensor. When the pxa_camera driver module was removed it tried to unregister clk, but this caused a similar warning: WARNING: CPU: 0 PID: 6740 at drivers/media/v4l2-core/v4l2-clk.c:278 v4l2_clk_unregister(): Refusing to unregister ref-counted 0-0030 clock! The clock was at time still refcounted by the sensor driver. Before the removing of the pxa_camera the clock must be dropped by the sensor driver. This should be triggered by v4l2_async_notifier_unregister() call which removes sensor driver module too, calls unbind() function and then tries to probe sensor driver again. Inside unbind() we can safely unregister the v4l2 clock as the sensor driver got removed. The original v4l2_clk_unregister() should be put inside test as the clock can be already unregistered from unbind(). If there was not any bound sensor the clock is still present. The codepath is practically a copy from the old soc_camera. The bug was tested with a pxa_camera+ov9640 combination during the conversion of the ov9640 from the soc_camera. Signed-off-by:
Petr Cvek <petr.cvek@tul.cz> Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Arnd Bergmann authored
Changing the IS_REACHABLE() into a plain #ifdef broke the case of CONFIG_MEDIA_RC=m && CONFIG_MEDIA_CEC=y: drivers/media/cec/cec-core.o: In function `cec_unregister_adapter': cec-core.c:(.text.cec_unregister_adapter+0x18): undefined reference to `rc_unregister_device' drivers/media/cec/cec-core.o: In function `cec_delete_adapter': cec-core.c:(.text.cec_delete_adapter+0x54): undefined reference to `rc_free_device' drivers/media/cec/cec-core.o: In function `cec_register_adapter': cec-core.c:(.text.cec_register_adapter+0x94): undefined reference to `rc_register_device' cec-core.c:(.text.cec_register_adapter+0xa4): undefined reference to `rc_free_device' cec-core.c:(.text.cec_register_adapter+0x110): undefined reference to `rc_unregister_device' drivers/media/cec/cec-core.o: In function `cec_allocate_adapter': cec-core.c:(.text.cec_allocate_adapter+0x234): undefined reference to `rc_allocate_device' drivers/media/cec/cec-adap.o: In function `cec_received_msg': cec-adap.c:(.text.cec_received_msg+0x734): undefined reference to `rc_keydown' cec-adap.c:(.text.cec_received_msg+0x768): undefined reference to `rc_keyup' This adds an additional dependency to explicitly forbid this combination. Fixes: 5f2c467c ("[media] cec: add MEDIA_CEC_RC config option") Signed-off-by:
-
Arnd Bergmann authored
The barrier implied by spin_unlock() in rain_irq_work_handler makes it hard for gcc to figure out the state of the variables, leading to a false-positive warning: drivers/media/usb/rainshadow-cec/rainshadow-cec.c: In function 'rain_irq_work_handler': drivers/media/usb/rainshadow-cec/rainshadow-cec.c:171:31: error: 'data' may be used uninitialized in this function [-Werror=maybe-uninitialized] Slightly rearranging the code makes it easier for the compiler to see that the code is correct, and gets rid of the warning. Fixes: 0f314f6c ("[media] rainshadow-cec: new RainShadow Tech HDMI CEC driver") Signed-off-by:
-
Arnd Bergmann authored
gcc warns about an obviously incorrect use of strncat(): drivers/media/usb/rainshadow-cec/rainshadow-cec.c: In function 'rain_cec_adap_transmit': drivers/media/usb/rainshadow-cec/rainshadow-cec.c:299:4: error: specified bound 48 equals the size of the destination [-Werror=stringop-overflow=] It seems that strlcat was intended here, and using that makes the code correct. Fixes: 0f314f6c ("[media] rainshadow-cec: new RainShadow Tech HDMI CEC driver") Signed-off-by:
-
