- 15 Jan, 2017 16 commits
-
-
Eric Dumazet authored
[ Upstream commit 7cfd5fd5 ] On 32bit arches, (skb->end - skb->data) is not 'unsigned int', so we shall use min_t() instead of min() to avoid a compiler error. Fixes: 1272ce87 ("gro: Enter slow-path if there is no tailroom") Reported-by:
kernel test robot <fengguang.wu@intel.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Herbert Xu authored
[ Upstream commit 1272ce87 ] The GRO path has a fast-path where we avoid calling pskb_may_pull and pskb_expand by directly accessing frag0. However, this should only be done if we have enough tailroom in the skb as otherwise we'll have to expand it later anyway. This patch adds the check by capping frag0_len with the skb tailroom. Fixes: cb18978c ("gro: Open-code final pskb_may_pull") Reported-by:
Slava Shwartsman <slavash@mellanox.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
hayeswang authored
[ Upstream commit 75dc692e ] Pause the rx and make sure the rx fifo is empty when the autosuspend occurs. If the rx data comes when the driver is canceling the rx urb, the host controller would stop getting the data from the device and continue it after next rx urb is submitted. That is, one continuing data is split into two different urb buffers. That let the driver take the data as a rx descriptor, and unexpected behavior happens. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
hayeswang authored
[ Upstream commit 8fb28061 ] Split rtl8152_suspend() into rtl8152_system_suspend() and rtl8152_rumtime_suspend(). Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit 5350d54f ] In the case of custom rules being present we need to handle the case of the LOCAL table being intialized after the new rule has been added. To address that I am adding a new check so that we can make certain we don't use an alias of MAIN for LOCAL when allocating a new table. Fixes: 0ddcf43d ("ipv4: FIB Local/MAIN table collapse") Reported-by:
Oliver Brunel <jjk@jjacky.com> Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Michal Tesar authored
[ Upstream commit 7ababb78 ] 5.2. Action on Reception of a Query When a system receives a Query, it does not respond immediately. Instead, it delays its response by a random amount of time, bounded by the Max Resp Time value derived from the Max Resp Code in the received Query message. A system may receive a variety of Queries on different interfaces and of different kinds (e.g., General Queries, Group-Specific Queries, and Group-and-Source-Specific Queries), each of which may require its own delayed response. Before scheduling a response to a Query, the system must first consider previously scheduled pending responses and in many cases schedule a combined response. Therefore, the system must be able to maintain the following state: o A timer per interface for scheduling responses to General Queries. o A per-group and interface timer for scheduling responses to Group- Specific and Group-and-Source-Specific Queries. o A per-group and interface list of sources to be reported in the response to a Group-and-Source-Specific Query. When a new Query with the Router-Alert option arrives on an interface, provided the system has state to report, a delay for a response is randomly selected in the range (0, [Max Resp Time]) where Max Resp Time is derived from Max Resp Code in the received Query message. The following rules are then used to determine if a Report needs to be scheduled and the type of Report to schedule. The rules are considered in order and only the first matching rule is applied. 1. If there is a pending response to a previous General Query scheduled sooner than the selected delay, no additional response needs to be scheduled. 2. If the received Query is a General Query, the interface timer is used to schedule a response to the General Query after the selected delay. Any previously pending response to a General Query is canceled. --8<-- Currently the timer is rearmed with new random expiration time for every incoming query regardless of possibly already pending report. Which is not aligned with the above RFE. It also might happen that higher rate of incoming queries can postpone the report after the expiration time of the first query causing group membership loss. Now the per interface general query timer is rearmed only when there is no pending report already scheduled on that interface or the newly selected expiration time is before the already pending scheduled report. Signed-off-by:
Michal Tesar <mtesar@redhat.com> Signed-off-by:
-
Reiter Wolfgang authored
[ Upstream commit 3b48ab22 ] Final nlmsg_len field update must reflect inserted net_dm_drop_point data. This patch depends on previous patch: "drop_monitor: add missing call to genlmsg_end" Signed-off-by:
Reiter Wolfgang <wr0112358@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Reiter Wolfgang authored
[ Upstream commit 4200462d ] Update nlmsg_len field with genlmsg_end to enable userspace processing using nlmsg_next helper. Also adds error handling. Signed-off-by:
-
Eli Cohen authored
[ Upstream commit d151d73d ] Avoid using a local variable named numa_node to avoid shadowing a public one. Fixes: db058a18 ('net/mlx5_core: Set irq affinity hints') Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Noa Osherovich authored
[ Upstream commit 883371c4 ] When setting HCA capabilities, set log_max_qp to be the minimum between the selected profile's value and the HCA limitation. Fixes: 938fe83c ('net/mlx5_core: New device capabilities...') Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 57016590 ] There is currently a small window during which the network device registered by stmmac can be made visible, yet all resources, including and clock and MDIO bus have not had a chance to be set up, this can lead to the following error to occur: [ 473.919358] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): stmmac_dvr_probe: warning: cannot get CSR clock [ 473.919382] stmmaceth 0000:01:00.0: no reset control found [ 473.919412] stmmac - user ID: 0x10, Synopsys ID: 0x42 [ 473.919429] stmmaceth 0000:01:00.0: DMA HW capability register supported [ 473.919436] stmmaceth 0000:01:00.0: RX Checksum Offload Engine supported [ 473.919443] stmmaceth 0000:01:00.0: TX Checksum insertion supported [ 473.919451] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer [ 473.921395] libphy: PHY stmmac-1:00 not found [ 473.921417] stmmaceth 0000:01:00.0 eth0: Could not attach to PHY [ 473.921427] stmmaceth 0000:01:00.0 eth0: stmmac_open: Cannot attach to PHY (error: -19) [ 473.959710] libphy: stmmac: probed [ 473.959724] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 0 IRQ POLL (stmmac-1:00) active [ 473.959728] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 1 IRQ POLL (stmmac-1:01) [ 473.959731] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 2 IRQ POLL (stmmac-1:02) [ 473.959734] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 3 IRQ POLL (stmmac-1:03) Fix this by making sure that register_netdev() is the last thing being done, which guarantees that the clock and the MDIO bus are available. Fixes: 4bfcbd7a ("stmmac: Move the mdio_register/_unregister in probe/remove") Reported-by:
Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 628185cf ] Shahar reported a soft lockup in tc_classify(), where we run into an endless loop when walking the classifier chain due to tp->next == tp which is a state we should never run into. The issue only seems to trigger under load in the tc control path. What happens is that in tc_ctl_tfilter(), thread A allocates a new tp, initializes it, sets tp_created to 1, and calls into tp->ops->change() with it. In that classifier callback we had to unlock/lock the rtnl mutex and returned with -EAGAIN. One reason why we need to drop there is, for example, that we need to request an action module to be loaded. This happens via tcf_exts_validate() -> tcf_action_init/_1() meaning after we loaded and found the requested action, we need to redo the whole request so we don't race against others. While we had to unlock rtnl in that time, thread B's request was processed next on that CPU. Thread B added a new tp instance successfully to the classifier chain. When thread A returned grabbing the rtnl mutex again, propagating -EAGAIN and destroying its tp instance which never got linked, we goto replay and redo A's request. This time when walking the classifier chain in tc_ctl_tfilter() for checking for existing tp instances we had a priority match and found the tp instance that was created and linked by thread B. Now calling again into tp->ops->change() with that tp was successful and returned without error. tp_created was never cleared in the second round, thus kernel thinks that we need to link it into the classifier chain (once again). tp and *back point to the same object due to the match we had earlier on. Thus for thread B's already public tp, we reset tp->next to tp itself and link it into the chain, which eventually causes the mentioned endless loop in tc_classify() once a packet hits the data path. Fix is to clear tp_created at the beginning of each request, also when we replay it. On the paths that can cause -EAGAIN we already destroy the original tp instance we had and on replay we really need to start from scratch. It seems that this issue was first introduced in commit 12186be7 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup"). Fixes: 12186be7 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup") Reported-by:
Shahar Klein <shahark@mellanox.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
Dave Jones authored
[ Upstream commit a98f9175 ] By setting certain socket options on ipv6 raw sockets, we can confuse the length calculation in rawv6_push_pending_frames triggering a BUG_ON. RIP: 0010:[<ffffffff817c6390>] [<ffffffff817c6390>] rawv6_sendmsg+0xc30/0xc40 RSP: 0018:ffff881f6c4a7c18 EFLAGS: 00010282 RAX: 00000000fffffff2 RBX: ffff881f6c681680 RCX: 0000000000000002 RDX: ffff881f6c4a7cf8 RSI: 0000000000000030 RDI: ffff881fed0f6a00 RBP: ffff881f6c4a7da8 R08: 0000000000000000 R09: 0000000000000009 R10: ffff881fed0f6a00 R11: 0000000000000009 R12: 0000000000000030 R13: ffff881fed0f6a00 R14: ffff881fee39ba00 R15: ffff881fefa93a80 Call Trace: [<ffffffff8118ba23>] ? unmap_page_range+0x693/0x830 [<ffffffff81772697>] inet_sendmsg+0x67/0xa0 [<ffffffff816d93f8>] sock_sendmsg+0x38/0x50 [<ffffffff816d982f>] SYSC_sendto+0xef/0x170 [<ffffffff816da27e>] SyS_sendto+0xe/0x10 [<ffffffff81002910>] do_syscall_64+0x50/0xa0 [<ffffffff817f7cbc>] entry_SYSCALL64_slow_path+0x25/0x25 Handle by jumping to the failure path if skb_copy_bits gets an EFAULT. Reproducer: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #define LEN 504 int main(int argc, char* argv[]) { int fd; int zero = 0; char buf[LEN]; memset(buf, 0, LEN); fd = socket(AF_INET6, SOCK_RAW, 7); setsockopt(fd, SOL_IPV6, IPV6_CHECKSUM, &zero, 4); setsockopt(fd, SOL_IPV6, IPV6_DSTOPTS, &buf, LEN); sendto(fd, buf, 1, 0, (struct sockaddr *) buf, 110); } Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
David Ahern authored
[ Upstream commit eb63ecc1 ] Locally originated traffic in a VRF fails in the presence of a POSTROUTING rule. For example, $ iptables -t nat -A POSTROUTING -s 11.1.1.0/24 -j MASQUERADE $ ping -I red -c1 11.1.1.3 ping: Warning: source address might be selected on device other than red. PING 11.1.1.3 (11.1.1.3) from 11.1.1.2 red: 56(84) bytes of data. ping: sendmsg: Operation not permitted Worse, the above causes random corruption resulting in a panic in random places (I have not seen a consistent backtrace). Call nf_reset to drop the conntrack info following the pass through the VRF device. The nf_reset is needed on Tx but not Rx because of the order in which NF_HOOK's are hit: on Rx the VRF device is after the real ingress device and on Tx it is is before the real egress device. Connection tracking should be tied to the real egress device and not the VRF device. Fixes: 8f58336d ("net: Add ethernet header for pass through VRF device") Fixes: 35402e31 ("net: Add IPv6 support to VRF device") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 93a97c50 ] If we can't allocate the resources in gigaset_initdriver() then we should return -ENOMEM instead of zero. Fixes: 2869b23e ("[PATCH] drivers/isdn/gigaset: new M101 driver (v2)") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
stephen hemminger authored
[ Upstream commit a50af86d ] Hyper-V (and Azure) support using NVGRE which requires some extra space for encapsulation headers. Because of this the largest allowed TSO packet is reduced. For older releases, hard code a fixed reduced value. For next release, there is a better solution which uses result of host offload negotiation. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
- 12 Jan, 2017 24 commits
-
-
Greg Kroah-Hartman authored
-
Felipe Balbi authored
commit eaa496ff upstream. ep->mult is supposed to be set to Isochronous and Interrupt Endapoint's multiplier value. This value is computed from different places depending on the link speed. If we're dealing with HighSpeed, then it's part of bits [12:11] of wMaxPacketSize. This case wasn't taken into consideration before. While at that, also make sure the ep->mult defaults to one so drivers can use it unconditionally and assume they'll never multiply ep->maxpacket to zero. Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit c53af76d which is commit eaa496ff upstream as it was incorrect. Reported-by:
Bin Liu <b-liu@ti.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Thomas Gleixner authored
commit c1a9eeb9 upstream. When a disfunctional timer, e.g. dummy timer, is installed, the tick core tries to setup the broadcast timer. If no broadcast device is installed, the kernel crashes with a NULL pointer dereference in tick_broadcast_setup_oneshot() because the function has no sanity check. Reported-by:
Mason <slash.tmp@free.fr> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Richard Cochran <rcochran@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org>, Cc: Sebastian Frias <sf84@laposte.net> Cc: Thibaud Cornic <thibaud_cornic@sigmadesigns.com> Cc: Robin Murphy <robin.murphy@arm.com> Link: http://lkml.kernel.org/r/1147ef90-7877-e4d2-bb2b-5c4fa8d3144b@free.frSigned-off-by:
-
Michel Dänzer authored
commit 4349bd77 upstream. We were storing viewport relative coordinates for AVIVO/DCE display engines. However, radeon_crtc_cursor_set2 and radeon_cursor_reset pass radeon_crtc->cursor_x/y as the x/y parameters of radeon_cursor_move_locked, which would break if the CRTC isn't located at (0, 0). Cc: stable@vger.kernel.org Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit f0b0faff upstream. Smatch complains about where the au8293_data is placed: drivers/media/pci/cx23885/cx23885-dvb.c:2174 dvb_register() info: 'a8293_pdata' is not actually initialized (unreached code). It is not actually expected to have such initialization at switch { foo = bar; case: ... } Not really sure how gcc does that, but this is something that I would expect that different compilers would do different things. David Howells checked with the compiler people: it's not really expected to initialise as expected. So, move the initialization outside the switch(), making smatch to shut up one warning. Acked-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Arnd Bergmann authored
commit 57e7c8ce upstream. When CONFIG_PCI_MSI is disabled, we get warnings about unused functions in the vxge driver: drivers/net/ethernet/neterion/vxge/vxge-main.c:2121:13: warning: 'adaptive_coalesce_tx_interrupts' defined but not used [-Wunused-function] drivers/net/ethernet/neterion/vxge/vxge-main.c:2149:13: warning: 'adaptive_coalesce_rx_interrupts' defined but not used [-Wunused-function] We could add another #ifdef here, but it's nicer to avoid those warnings for good by converting the existing #ifdef to if(IS_ENABLED()), which has the same effect but provides better compile-time coverage in general, and lets the compiler understand better when the function is intentionally unused. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Paul Burton authored
commit 2f5281ba upstream. cpmac_start_xmit() used the max() macro on skb->len (an unsigned int) and ETH_ZLEN (a signed int literal). This led to the following compiler warning: In file included from include/linux/list.h:8:0, from include/linux/module.h:9, from drivers/net/ethernet/ti/cpmac.c:19: drivers/net/ethernet/ti/cpmac.c: In function 'cpmac_start_xmit': include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast (void) (&_max1 == &_max2); \ ^ drivers/net/ethernet/ti/cpmac.c:560:8: note: in expansion of macro 'max' len = max(skb->len, ETH_ZLEN); ^ On top of this, it assigned the result of the max() macro to a signed integer whilst all further uses of it result in it being cast to varying widths of unsigned integer. Fix this up by using max_t to ensure the comparison is performed as unsigned integers, and for consistency change the type of the len variable to unsigned int. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
-
Arnd Bergmann authored
commit 0335695d upstream. The current_user_ns() macro currently returns &init_user_ns when user namespaces are disabled, and that causes several warnings when building with gcc-6.0 in code that compares the result of the macro to &init_user_ns itself: fs/xfs/xfs_ioctl.c: In function 'xfs_ioctl_setattr_check_projid': fs/xfs/xfs_ioctl.c:1249:22: error: self-comparison always evaluates to true [-Werror=tautological-compare] if (current_user_ns() == &init_user_ns) This is a legitimate warning in principle, but here it isn't really helpful, so I'm reprasing the definition in a way that shuts up the warning. Apparently gcc only warns when comparing identical literals, but it can figure out that the result of an inline function can be identical to a constant expression in order to optimize a condition yet not warn about the fact that the condition is known at compile time. This is exactly what we want here, and it looks reasonable because we generally prefer inline functions over macros anyway. Signed-off-by:
Serge Hallyn <serge.hallyn@canonical.com> Cc: David Howells <dhowells@redhat.com> Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com> Cc: James Morris <james.l.morris@oracle.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
H Hartley Sweeten authored
commit f6b1160e upstream. Arnd Bergmann pointed out that gcc-6 warns about passing negative signed integer into swab16() due to the macro expansion of 'outw'. It appears that the register map constants are causing the warnings. Actually, it might just be the (1 << 15) ones... Convert all the constants as suggested by checkpatch.pl: CHECK: Prefer using the BIT macro The BIT() macro will make all the constants explicitly 'unsigned', which helps to avoid the warning. Fix the, unsused, DT2821_CHANCSR_PRESLA() macro. The "Present List Address" (PRESLA) bits in the CHANCSR register are read only. This define was meant to extract the bits from the read value. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reported-by:
Ian Abbott <abbotti@mev.co.uk> Tested-by:
-
Johan Hovold authored
commit 99e5cde5 upstream. Make sure to drop any device reference taken by vio_find_node() when adding and removing virtual I/O slots. Fixes: 5eeb8c63 ("[PATCH] PCI Hotplug: rpaphp: Move VIO registration") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Shaohua Li authored
commit 82a301cb upstream. Fixes: 90f5f7ad("md: Wait for md_check_recovery before attempting device removal.") Reviewed-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Ard Biesheuvel authored
commit 1803b9a5 upstream. The core AES cipher implementation that uses ARMv8 Crypto Extensions instructions erroneously loads the round keys as 64-bit quantities, which causes the algorithm to fail when built for big endian. In addition, the key schedule generation routine fails to take endianness into account as well, when loading the combining the input key with the round constants. So fix both issues. Fixes: 12ac3efe ("arm64/crypto: use crypto instructions to generate AES key schedule") Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Ard Biesheuvel authored
commit caf4b9e2 upstream. Emit the XTS tweak literal constants in the appropriate order for a single 128-bit scalar literal load. Fixes: 49788fe2 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions") Signed-off-by:
-
Ard Biesheuvel authored
commit ee71e5f1 upstream. The SHA1 digest is an array of 5 32-bit quantities, so we should refer to them as such in order for this code to work correctly when built for big endian. So replace 16 byte scalar loads and stores with 4x4 vector ones where appropriate. Fixes: 2c98833a ("arm64/crypto: SHA-1 using ARMv8 Crypto Extensions") Signed-off-by:
-
Ard Biesheuvel authored
commit a2c435cc upstream. The AES implementation using pure NEON instructions relies on the generic AES key schedule generation routines, which store the round keys as arrays of 32-bit quantities stored in memory using native endianness. This means we should refer to these round keys using 4x4 loads rather than 16x1 loads. In addition, the ShiftRows tables are loading using a single scalar load, which is also affected by endianness, so emit these tables in the correct order depending on whether we are building for big endian or not. Fixes: 49788fe2 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions") Signed-off-by:
-
Ard Biesheuvel authored
commit 56e4e76c upstream. The AES-CCM implementation that uses ARMv8 Crypto Extensions instructions refers to the AES round keys as pairs of 64-bit quantities, which causes failures when building the code for big endian. In addition, it byte swaps the input counter unconditionally, while this is only required for little endian builds. So fix both issues. Fixes: 12ac3efe ("arm64/crypto: use crypto instructions to generate AES key schedule") Signed-off-by:
-
Ard Biesheuvel authored
commit 58010fa6 upstream. The AES key schedule generation is mostly endian agnostic, with the exception of the rotation and the incorporation of the round constant at the start of each round. So implement a big endian specific version of that part to make the whole routine big endian compatible. Fixes: 86464859 ("crypto: arm - AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions") Signed-off-by:
-
Ard Biesheuvel authored
commit 9c433ad5 upstream. The GHASH key and digest are both pairs of 64-bit quantities, but the GHASH code does not always refer to them as such, causing failures when built for big endian. So replace the 16x1 loads and stores with 2x8 ones. Fixes: b913a640 ("arm64/crypto: improve performance of GHASH algorithm") Signed-off-by:
-
Ard Biesheuvel authored
commit 174122c3 upstream. The SHA256 digest is an array of 8 32-bit quantities, so we should refer to them as such in order for this code to work correctly when built for big endian. So replace 16 byte scalar loads and stores with 4x32 vector ones where appropriate. Fixes: 6ba6c74d ("arm64/crypto: SHA-224/SHA-256 using ARMv8 Crypto Extensions") Signed-off-by:
-
Dan Carpenter authored
commit 9e6e7c74 upstream. We added some new locking but forgot to unlock on error. Fixes: 57127645 ("s390/zcrypt: Introduce new SHA-512 based Pseudo Random Generator.") Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Dan Carpenter authored
commit 16652a93 upstream. We never set "ret" to RESULT_OK. Fixes: 9f9c4180 ("mmc: mmc_test: add test for non-blocking transfers") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Tony Lindgren authored
commit bed57030 upstream. I noticed some wakeirq flakeyness with consumer drivers not using autosuspend. For drivers not using autosuspend, the wakeirq may never get unmasked in rpm_suspend() because of irq desc->depth. We are configuring dedicated wakeirqs to start with IRQ_NOAUTOEN as we naturally don't want them running until rpm_suspend() is called. However, when a consumer driver initially calls pm_runtime_get(), we now wrongly start with disable_irq_nosync() call on the dedicated wakeirq that is disabled to start with. This causes desc->depth to toggle between 1 and 2 instead of the usual 0 and 1. This can prevent enable_irq() from unmasking the wakeirq as that only happens at desc->depth 1. This does not necessarily show up with drivers using autosuspend as there is time for disable_irq_nosync() before rpm_suspend() gets called after the autosuspend timeout. Let's fix the issue by adding wirq->status that lazily gets set on the first rpm_suspend(). We also need PM runtime core private functions for dev_pm_enable_wake_irq_check() and dev_pm_disable_wake_irq_check() so we can enable the dedicated wakeirq on the first rpm_suspend(). While at it, let's also fix the comments for dev_pm_enable_wake_irq() and dev_pm_disable_wake_irq(). Those can still be used by the consumer drivers as needed because the IRQ core manages the interrupt usecount for us. Fixes: 4990d4fe (PM / Wakeirq: Add automated device wake IRQ handling) Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Florian Fainelli authored
commit 34c53579 upstream. We did not implement an irq_cpu_offline callback for our irqchip, yet we support setting a given IRQ's affinity. This resulted in interrupts whose affinity mask included CPUs being taken offline not to work correctly once the CPU had been put offline. Fixes: 5f7f0317 ("IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers") Signed-off-by:
-
