- 14 Aug, 2018 2 commits
-
-
Jani Nikula authored
Since Haswell we have no color range indication either in the pipe or port registers for DP. Instead, there's a separate register for setting the DP Main Stream Attributes (MSA) directly. The MSA register definition makes no references to colorimetry, just a vague reference to the DP spec. The connection to the color range was lost. Apparently we've failed to set the proper MSA bit for limited, or CEA, range ever since the first DDI platforms. We've started setting other MSA parameters since commit dae84799 ("drm/i915: add intel_ddi_set_pipe_settings"). Without the crucial bit of information, the DP sink has no way of knowing the source is actually transmitting limited range RGB, leading to "washed out" colors. With the colorimetry information, compliant sinks should be able to handle the limited range properly. Native (i.e. non-LSPCON) HDMI was not affected because we do pass the color range via AVI infoframes. Though not the root cause, the problem was made worse for DDI platforms with commit 55bc60db ("drm/i915: Add "Automatic" mode for the "Broadcast RGB" property"), which selects limited range RGB automatically based on the mode, as per the DP, HDMI and CEA specs. After all these years, the fix boils down to flipping one bit. [Per testing reports, this fixes DP sinks, but not the LSPCON. My educated guess is that the LSPCON fails to turn the CEA range MSA into AVI infoframes for HDMI.] Reported-by:
Michał Kopeć <mkopec12@gmail.com> Reported-by:
N. W. <nw9165-3201@yahoo.com> Reported-by:
Nicholas Stommel <nicholas.stommel@gmail.com> Reported-by:
Tom Yan <tom.ty89@gmail.com> Tested-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180814060001.18224-1-jani.nikula@intel.com
-
Chris Wilson authored
This reapplies commit 39f3be16 ("drm/i915: Kick waiters on resetting legacy rings") after the improved gem_eio was run across all machines we found that gen3 and early gen4 still lost the immediate interrupt following reset, and the HWSTAM w/a applied to gen6+ is inadequate. Unlike the later gen, on gen3/4 the principle (and only tests to fail so far) are the wait vs reset test cases, whereas the reset stress case works fine (which was the predominantly failing case for gen6+). That is enough to suggest the underlying issue is sufficiently different to support the difference in HWSTAM efficacy. Testcase: igt/gem_eio/wait-10ms References: 39f3be16 ("drm/i915: Kick waiters on resetting legacy rings") References: a69ab52b ("drm/i915: Remove extra waiter kick on legacy resets") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180814104056.27001-1-chris@chris-wilson.co.uk
-
- 13 Aug, 2018 5 commits
-
-
Chris Wilson authored
Do not call gen6_reset_rps_interrupts() when we know the registers do not exist. Signed-off-by:
-
Chris Wilson authored
Since the gt powerstate is allocated by i915_gem_init, clean it from i915_gem_fini for symmetry and to correct the imbalance on error. Signed-off-by:
-
Mika Kuoppala authored
If engine reports that it is not ready for reset, we give up. Evidence shows that forcing a per engine reset on an engine which is not reporting to be ready for reset, can bring it back into a working order. There is risk that we corrupt the context image currently executing on that engine. But that is a risk worth taking as if we unblock the engine, we prevent a whole device wedging in a case of full gpu reset. Reset individual engine even if it reports that it is not prepared for reset, but only if we aim for full gpu reset and not on first reset attempt. v2: force reset only on later attempts, readability (Chris) v3: simplify with adequate caffeine levels (Chris) v4: comment about risks and migitations (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Mika Kuoppala authored
There is a possibility for per gen reset logic to be more nasty if the softer approach on resetting does not bear fruit. Expose retry count to per gen reset logic if it wants to take such tough measures. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
We require that we keep the list of outstanding work short so that we do not "leak" memory while pageflipping under stress. However that system stress may delay kernel workers virtually indefinitely, which incurs the pageflips stall and eventually hit a timeout waiting for the cleanup. Try to combat CPU starvation of our short-lived cleanup workers by switching to a high priority workqueue. Testcase: igt/kms_cursor_legacy/all-pipes-torture-move References: https://bugs.freedesktop.org/show_bug.cgi?id=107122Signed-off-by:
-
- 10 Aug, 2018 3 commits
-
-
Paulo Zanoni authored
The RS_CTX_ENABLE and CTX_SAVE_INHIBIT bits are not present on ICL anymore, but we still try to set them and then check them with GEM_BUG_ON, resulting in a BUG() call. The bug can be reproduced by igt/drv_selftest/live_hangcheck/others-priority and our CI was able to catch it. It is worth noticing that commit 05f0addd ("drm/i915/icl: Enhanced execution list support") already tried to avoid the save bits on ICL, but only inside populate_lr_context(). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Testcase: igt/drv_selftest/live_hangcheck/others-priority Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107399 References: 05f0addd ("drm/i915/icl: Enhanced execution list support") Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180809235852.24516-1-paulo.r.zanoni@intel.comReviewed-by:
-
Maarten Lankhorst authored
This will make it easier to test PSR1 on PSR2 capable eDP machines. Changes since v1: - Remove I915_PSR_DEBUG_FORCE_PSR2, it did nothing, not sure forcing PSR2 would even work. - Handle NULL crtc in intel_psr_set_debugfs_mode. (dhnkrn) Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180808141911.7647-2-maarten.lankhorst@linux.intel.comReviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
-
Maarten Lankhorst authored
Currently tests modify i915.enable_psr and then do a modeset cycle to change PSR. We can write a value to i915_edp_psr_debug to force a certain PSR mode without a modeset. To retain compatibility with older userspace, we also still allow the override through the module parameter, and add some tracking to check whether a debugfs mode is specified. Changes since v1: - Rename dev_priv->psr.enabled to .dp, and .hw_configured to .enabled. - Fix i915_psr_debugfs_mode to match the writes to debugfs. - Rename __i915_edp_psr_write to intel_psr_set_debugfs_mode, simplify it and move it to intel_psr.c. This keeps all internals in intel_psr.c - Perform an interruptible wait for hw completion outside of the psr lock, instead of being forced to trywait and return -EBUSY. Changes since v2: - Rebase on top of intel_psr changes. Changes since v3: - Assign psr.dp during init. (dhnkrn) - Add prepared bool, which should be used instead of relying on psr.dp. (dhnkrn) - Fix -EDEADLK handling in debugfs. (dhnkrn) - Clean up waiting for idle in intel_psr_set_debugfs_mode. - Print PSR mode when trying to enable PSR. (dhnkrn) - Move changing psr debug setting to i915_edp_psr_debug_set. (dhnkrn) Changes since v4: - Return error in _set() function. - Change flag values to make them easier to remember. (dhnkrn) - Only assign psr.dp once. (dhnkrn) - Only set crtc_state->has_psr on the crtc with psr.dp. - Fix typo. (dhnkrn) Changes since v5: - Only wait for PSR idle on the PSR connector correctly. (dhnkrn) - Reinstate WARN_ON(drrs.dp) in intel_psr_enable. (dhnkrn) - Remove stray comment. (dhnkrn) - Be silent in intel_psr_compute_config on wrong connector. (dhnkrn) Signed-off-by:
-
- 09 Aug, 2018 3 commits
-
-
Chris Wilson authored
The call to i915_gem_unpark() checks that we hold a rpm wakeref before taking a long term wakeref for i915->gt.awake. We should therefore make sure we do hold the wakeref when directly calling unpark to disable the retire worker. Fixes: 932cac10 ("drm/i915/selftests: Prevent background reaping of active objects") Signed-off-by:
-
Chris Wilson authored
On suspend, we cancel the automatic forcewake and clear all other sources of forcewake so the machine can sleep before we do suspend. However, we expose the forcewake to userspace (only via debugfs, but nevertheless we do) and want to restore that upon resume or else our accounting will be off and we may not acquire the forcewake before we use it. So record which domains we cleared on suspend and reacquire them early on resume. v2: Hold the spinlock to appease our sanitychecks v3: s/fw_domains_user/fw_domains_saved/ to convey intent more clearly Reported-by:
Imre Deak <imre.deak@linux.intel.com> Fixes: b8473050 ("drm/i915: Fix forcewake active domain tracking") Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180808210842.3555-1-chris@chris-wilson.co.uk
-
Rodrigo Vivi authored
One more CFL ID added to spec. Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180803232721.20038-1-rodrigo.vivi@intel.com
-
- 08 Aug, 2018 13 commits
-
-
Chris Wilson authored
Now with a more efficacious workaround for the lost interrupts after reset, we can remove the hack of kicking the waiters after reset. The issue was that the kick only worked for the immediate window after the reset (those seqno that would complete in the time it took for the waiter thread to perform its check) but miss any seqno that lacked an interrupt afterwards. References: 39f3be16 ("drm/i915: Kick waiters on resetting legacy rings") Signed-off-by:
-
Chris Wilson authored
An oddity occurs on Sandybridge, Ivybridge and Haswell (and presumably Valleyview) in that for the period following the GPU restart after a reset, there are no GT interrupts received. From Ville's notes, bit 0 in the HWSTAM corresponds to the render interrupt, and if we unmask it we do see immediate resumption of GT interrupt delivery (via the master irq handler) after the reset. v2: Limit the w/a to the render interrupt from rcs Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107500 Fixes: c5498089 ("drm/i915: Mask everything in ring HWSTAM on gen6+ in ringbuffer mode") References: d420a50c ("drm/i915: Clean up the HWSTAM mess") Testcase: igt/gem_eio/reset-stress Signed-off-by:
-
Chris Wilson authored
Hitting the timeout and finding that all engines are actually idle is indicative of an interrupt delivery problem. This problem is an issue that we need to fix, so make sure we log it and provide the GEM trace. Signed-off-by:
-
Imre Deak authored
On ICL there are 5 fused power gates, so add the two missing ones for clarity. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
There is no need for separate IDs for power wells on a new platform with the same functionality as an other power well on a previous platform, we can just reuse the ID from the previous platform. This is only possible after the previous patches where we removed dependence on the actual enum values. This also fixes a problem on ICL where in assert_can_enable_dc5/9() we would've failed to look up the PW#2 power well. v2: - Keep an ID assigned for the ICL PW#2 power well too. (Paulo) Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
The format for the ID names is <platform>_DISP_PW_* so rename the IDs not following this accordingly. Leave BXT_DPIO_CMN_BC as-is since we'll change that to use another existing ID in the next patch. v2: - Fix line over 80 chars checkpatch warning. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
Now that we removed dependence on the power well IDs to determine the control register and request/status flag offsets the only purpose of power well IDs is to look up power wells directly bypassing the power domains framework. However this direct lookup isn't needed for most of the exisiting power wells and hopefully won't be needed for any new power wells in the future. To make maintenance of the power well ID enum easier, don't require a unique ID for each power well, only if it's necessary. Remove the IDs becoming redundant this way and assign to all the corresponding power wells a new DISP_PW_ID_NONE ID. After the previous two patches the IDs don't need to have a fixed value, so remove the explicit initializers and adjust the enum's code comment accordingly. v2: - Keep required ID assignments for HSW_DISP_PW_GLOBAL and ICL_DISP_PW_2. (Paulo) Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
Similarly to the previous patch use a separate request/status HW flag index defined right after the corresponding control registers instead of depending for this on the power well IDs. Since the set of control/status registers varies among the different power wells (on a single platform), also add a new i915_power_well_registers struct that we populate and assign to each DDI power well as needed. Also clarify a bit the code comment describing the function and layout of the control registers. This also fixes a problem on ICL, where we incorrectly read the KVMR control register in hsw_power_well_requesters() even for DDI and AUX power wells. v2: - Clarify platform range tags in code comments. (Paulo) - Fix line over 80 chars checkpatch warning. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
Atm, we determine the control/status flag offsets within the PUNIT control/status registers based on the power well's ID. Since the power well ID enum is global across all platforms, the associated macros to get the flag offsets involves some magic. This makes checking the register/bit definitions against the specification more difficult than necessary. Also the values in the power well ID enum must stay fixed, making code maintenance of the enum cumbersome. To solve the above define the control/status flag indices right after the corresponding registers and use these to derive the control/status flag values by storing the indices in the i915_power_well_desc struct. Initializing anonymous union fields require the preceding field in the struct to be explicitly initialized - even when using named initializers - and the initialization to be done right before the union initialization, hence the reordering of the .id fields. v2: - Clarify commit log message about anonymous union initializers. (Paulo) Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
It makes sense to keep unchanging data const. Extract such fields from the i915_power_well struct into a new i915_power_well_desc struct that we initialize during compile time. For the rest of the dynamic fields allocate an array of i915_power_well objects in i915 dev_priv, and link to each of these objects their corresponding i915_power_well_desc object. v2: - Fix checkpatch warnings about missing param name in fn declaration and lines over 80 chars. (Paulo) - Move check for unique IDs to __set_power_wells(). Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
The callbacks these asserts are called from are used from a single power well, so not much point in checking that. The check also requires a unique power well ID that we would need to keep around only for this purpose. (A follow-up patch removes power well IDs not needed for direct power well access). Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
intel_power_domains_fini() rolls back what was done in intel_power_domains_init_hw(), so rename and move it accordingly. This allows us adding a cleanup function later for intel_power_domains_init() in a cleaner way. No functional change. v2: - Fix checkpatch error adding missing param name to function declaration. (Paulo) Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
Similarly to commit 0a445945 ("drm/i915: Work around GCC anonymous union initialization bug") we need to initialize anonymous unions inside extra braces to work around a GCC4.4 build error. v2: - Fix checkpatch errors in commit log. (Paulo) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 07 Aug, 2018 3 commits
-
-
Chris Wilson authored
We have a few instances of checking seqno-1 to see if the HW has started the request. Pull those together under a helper. v2: Pull the !seqno assertion higher, as given seqno==1 we may indeed check to see if we have started using seqno==0. Suggested-by:
-
Mahesh Kumar authored
We distribute DDB equally among all pipes irrespective of display buffer requirement of each pipe. This leads to a situation where high resolution y-tiled display can not be enabled with 2 low resolution displays. Main contributing factor for DDB requirement is width of the display. This patch make changes to distribute ddb based on display width. So display with higher width will get bigger chunk of DDB. Changes Since V1: - pipe_size/ddb_size will not overflow u16 so use appropriate data-types during computation (Chris) Changes Since V2: - avoid redundancy and possible truncation errors (Chris) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107113 Cc: raviraj.p.sitaram@intel.com Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by:
-
Mahesh Kumar authored
ddb_size is u16 so use same return type for intel_get_ddb_size wrapper. Signed-off-by:
-
- 06 Aug, 2018 4 commits
-
-
Chris Wilson authored
Experience teaches us over and over again that coherency on Baytrail requires the odd heavy hammer, and in particular clflush alone is not enough to guarrantee that writes from the CPU are picked up by the CS. Do as we do elsewhere and ensure we have an unconditional i915_gem_chipset_flush() after writing to memory and submitting a batch to HW. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107499Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180806144604.8346-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
A long time ago, we were afraid of handling interrupts and signaling waiters during a reset, worrying that the confusion in request handling would interfere with our attempts to process the reset in an orderly fashion. Since then, we have isolated our irq-driven request handling by virtue of the engine->timeline.lock and control of kthreads where required, eliminating the danger of concurrently processing interrupts. Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180806145647.13131-1-chris@chris-wilson.co.uk
-
Lucas De Marchi authored
After disabling resource streamer on ICL (due to it actually not existing there), I got feedback that there have been some experimental patches for mesa to use RS years ago, but nothing ever landed or shipped because there was no performance improvement. This removes it from kernel keeping the uapi defines around for compatibility. v2: - re-add the inadvertent removal of CTX_CTRL_INHIBIT_SYN_CTX_SWITCH - don't bother trying to document removed params on uapi header: applications should know that from the query. (from Chris) v3: - disable CTX_CTRL_RS_CTX_ENABLE istead of removing it - reword commit message after Daniele confirmed no performance regression on his machine - reword commit message to make clear RS is being removed due to never been used v4: - move I915_EXEC_RESOURCE_STREAMER to __I915_EXEC_ILLEGAL_FLAGS so the check on ioctl() is made much earlier by i915_gem_check_execbuffer() (suggested by Tvrtko) Signed-off-by:Lucas De Marchi <lucas.demarchi@intel.com> Acked-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
-
Lucas De Marchi authored
Resource streamer has been removed on GEN11 so move it to the FEATURES macro. Signed-off-by:
-
- 03 Aug, 2018 4 commits
-
-
Gwan-gyeong Mun authored
Trivial typo, s/loose/lose/, in i915_drm_resume. Signed-off-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180803164150.8185-1-gwan-gyeong.mun@intel.comReviewed-by:
-
Chris Wilson authored
Make sure that the RPS IIR is completely clear on disabling so we should not get any more interrupts after idling. Since the IIR is shared with the guc, we have to be careful to only clobber RPS events. Signed-off-by:
-
Chris Wilson authored
Having stored the IIR for action, we should always clear it. Signed-off-by:
-
Chris Wilson authored
The LPE audio is a child device of i915, it is powered up and down alongside the igfx and presents no independent runtime interface. This aptly fulfils the description of a "No-Callback" Device, so mark it thus. Fixes: 183c0035 ("drm/i915: Fix runtime PM for LPE audio") Testcase: igt/pm_rpm/basic-pci-d3-state Testcase: igt/pm_rpm/basic-rte Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180802140416.6062-1-chris@chris-wilson.co.uk
-
- 02 Aug, 2018 2 commits
-
-
Paulo Zanoni authored
We don't have proper watermark NV12 support on ICL due to differences in how it should be implemented. In commit 234059da ("drm/i915/icl: NV12 y-plane ddb is not in same plane") we avoided writing the non-existent PLANE_NV12_BUF_CFG registers but we forgot to also avoid them on the hardware state readout. While the code is still not correct, at least now we can avoid unclaimed register error messages when dealing with RGB formats, which makes CI happier. Also add some FIXME comments in order to make it even more clear that there's still work to do. References: commit 234059da ("drm/i915/icl: NV12 y-plane ddb is not in same plane") Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by:
-
Chris Wilson authored
We used to reset last_adj to 0 on crossing a power domain boundary, to slow down our rate of change. However, commit 60548c55 ("drm/i915: Interactive RPS mode") accidentally caused it to be reset on every frequency update, nerfing the fast response granted by the slow start algorithm. Fixes: 60548c55 ("drm/i915: Interactive RPS mode") Testcase: igt/pm_rps/mix-max-config-loaded Signed-off-by:
-
- 01 Aug, 2018 1 commit
-
-
Chris Wilson authored
In the aub trace utility, the context images are terminated with a MI_BATCH_BUFFER_END; the simulator is reported as complaining otherwise. Do the same for our protocontext image for completeness, and in passing apply the magic bit for gen10 to mark the end of the context image. Reported-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
-
