- 20 Jun, 2013 4 commits
-
-
git://github.com/mripard/linuxArnd Bergmann authored
From Maxime Ripard: Allwinner SoCs DT additions for 3.11, part 2 Mostly adds support for the i2c controllers and the Allwinner A10S SoC. * tag 'sunxi-dt-for-3.11-2' of git://github.com/mripard/linux: ARM: sunxi: Add Olimex A10s-Olinuxino-micro device tree ARM: sunxi: dt: Add Allwinner A10s DTSI ARM: sun4i: cubieboard: Enable the i2c controllers ARM: sun5i: olinuxino: Enable the i2c controllers ARM: sun5i: dt: Add i2c muxing options ARM: sun4i: dt: Add i2c muxing options ARM: sunxi: dt: Add i2c controller nodes to the DTSI Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
git://git.linaro.org/people/shawnguo/linux-2.6Arnd Bergmann authored
From Shawn Guo: imx device tree changes for 3.11: * A bunch of new board additions, imx6sl-evk, vf610-twr, imx53-tx53, imx53-m53evk and imx27-phytec-phycore * Various pinctrl setting updates and additions * Enable various on board peripherals, usb, audio, nor, display etc. * Configure L2 cache data and tag latency from device tree * Add imx-weim bus driver * tag 'imx-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: (82 commits) ARM: dts: imx27: Add VPU devicetree node ARM: mxc: fix gpio-ranges for VF610 ARM: dtsi: imx6qdl-sabresd: Enable WM8962 audio support ARM: dtsi: imx6qdl-sabresd: Enable SSI2 and AUDMUX ARM: dtsi: imx6qdl-sabresd: Add WM8962 CODEC support ARM: dtsi: imx6qdl-sabresd: add a fixed regulator for WM8962 ARM: dtsi: imx6dl: Add a pinctrl for AUDMUX ARM: dtsi: imx6q/imx6dl: Add a pinctrl for I2C1 ARM: dts: imx6qdl-sabresd: add clko1 iomux configuration ARM: dts: Phytec imx6q pfla02 and pbab01 support ARM: dts: imx6q: Add pinctrl for usdhc2 and enet ARM: dts: imx27-phytec-phycore-rdk: Add MTD name for NOR flash ARM: dts: imx27-phytec-phycore-rdk: Add SDHC support ARM: dts: i.MX27: Add SDHC devicetree nodes ARM: dts: i.MX27: Add DMA devicetree node ARM: dts: imx6qdl-sabreauto: enable the WEIM NOR ARM: dts: imx6dl: add pinctrls for WEIM NOR ARM: dts: imx6q: add pinctrls for WEIM NOR ARM: dts: imx6qdl: add more information for WEIM ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM ... Signed-off-by:
-
git://git.linaro.org/people/shawnguo/linux-2.6Arnd Bergmann authored
This is a dependency for imx/dt Signed-off-by: -
git://git.linaro.org/people/shawnguo/linux-2.6Arnd Bergmann authored
From Shawn Guo: mxs device tree changes for 3.11: * A couple of new board support, cfa10055 and cfa10057 * A few updates on cfa10036 device tree source * Some auart pinctrl data addition * Adopt soc bus infrastructure for mach-mxs * tag 'mxs-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: dt: Add Crystalfontz CFA-10057 device tree ARM: mxs: dt: Add the Crystalfontz CFA-10055 device tree ARM: cfa10049: Switch the chip select pin of the LCD controller ARM: cfa10036: Add USB0 OTG port ARM: dts: apf28dev: Add touchscreen support for APF28dev ARM: mxs: Fix UARTs on M28EVK ARM: cfa10036: dt: Change i2c0 clock frequency ARM: dts: cfa10036: Change the OLED display to SSD1306 ARM: mx28: add auart4 2 pins pinmux to imx28.dtsi ARM: mx28: add auart3 2 pins pinmux to imx28.dtsi ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi ARM: mxs: Use soc bus infrastructure ARM: dts: mx28: Adjust the digctl compatible string ARM: mxs: Remove init_irq declaration in machine description Includes an update to 3.10-rc6 Signed-off-by:
-
- 19 Jun, 2013 2 commits
-
-
git://git.xilinx.com/linux-xlnxArnd Bergmann authored
From Michal Simek: arm: Xilinx Zynq dt changes for v3.11 The branch contains: - DT uart handling cleanup - Support for zc706 and zed board - Removal of board compatible string * tag 'zynq-dt-for-3.11' of git://git.xilinx.com/linux-xlnx: arm: dt: zynq: Add support for the zed platform arm: dt: zynq: Add support for the zc706 platform arm: dt: zynq: Use 'status' property for UART nodes arm: zynq: Remove board specific compatibility string clk: zynq: Remove deprecated clock code arm: zynq: Migrate platform to clock controller clk: zynq: Add clock controller driver clk: zynq: Factor out PLL driver Signed-off-by:
-
Maxime Ripard authored
Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by:
Emilio López <emilio@elopez.com.ar> Acked-by:
-
- 17 Jun, 2013 34 commits
-
-
Soren Brinkmann authored
Add a DT fragment for the Zed Zynq platform and a corresponding target to the Makefile Signed-off-by:
Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by:
Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by:
Michal Simek <michal.simek@xilinx.com>
-
Soren Brinkmann authored
Add a DT fragment for the zc706 Zynq platform and a corresponding target to the Makefile. Signed-off-by:
-
Soren Brinkmann authored
Set the default status for UARTs to disabled in the zynq-7000.dtsi file and let board dts files enable the UARTs on demand. Signed-off-by:
-
Soren Brinkmann authored
It is not necessary to have board specific compatibility strings in the platform code. The board dts files can use the more generic 'xlnx,zynq-7000' string. Signed-off-by:
-
Alexander Shiyan authored
This patch adds the missing VPU devicetree node for i.MX27 CPUs. Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org>
-
Stephen Warren authored
The gpio-ranges properties in vf610.dtsi were written according to an older version of the GPIO bindings. Unfortunately, these were changed incompatibly in commit 86853c83 "gpio: add gpio offset in gpio range cells property". This patch adds the missing required extra cell in each gpio-ranges property. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
Nicolin Chen authored
Enable WM8962 ALSA machine driver via devicetree. Signed-off-by:
Nicolin Chen <b42378@freescale.com> Signed-off-by:
-
Nicolin Chen authored
Enable SSI2 and its pin configuration in AUDMUX. Signed-off-by:
-
Nicolin Chen authored
Add WM8962 CODEC support and enable its parent I2C bus. Signed-off-by:
-
Nicolin Chen authored
On Sabre SD, system controls WM8962 power by pulling up/down GPIO_4_10, so add a regulator controled by GPIO_4_10 for WM8962. Signed-off-by:
-
Nicolin Chen authored
Add a pinctrl for AUDMUX used on imx6dl-sabresd. Signed-off-by:
-
Nicolin Chen authored
Add a pinctrl for I2C1 used on imx6q/dl-sabresd. Signed-off-by:
-
Nicolin Chen authored
Setting GPIO_0 pad as clko1 clock output to provide MCLK for WM8962. Signed-off-by:
-
Christian Hemp authored
Add support for imx6q Phytec phyFLEX-i.MX6 Quad (aka pfla02 and pbab01). - Module pfla02 - Carrier-Board pbab01 Signed-off-by:
Christian Hemp <c.hemp@phytec.de> Signed-off-by:
-
Christian Hemp authored
Add a group to the usdhc2 and enet pinctrl. Signed-off-by:
-
Alexander Shiyan authored
This patch adds name for NOR flash. This keeps compatibility for commandline partitions parsing from old bootloaders and make name of device same for DT and non-DT boot. Signed-off-by:
Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by:
-
Alexander Shiyan authored
This patch adds the SHDC devicetree node for PCM970 board. Signed-off-by:
-
Alexander Shiyan authored
This patch adds the missing SDHC devicetree nodes for i.MX27 SoCs. Signed-off-by:
-
Alexander Shiyan authored
This patch adds the missing DMA devicetree node for i.MX27 SoCs. Signed-off-by:
-
Huang Shijie authored
Enable the WEIM NOR for imx6q{dl}-sabreauto boards. For the pin conflict with SPI NOR, its status is set to "disabled". Signed-off-by:Huang Shijie <b32955@freescale.com> Signed-off-by:
-
Huang Shijie authored
Add two pinctrls for WEIM: one for the weim nor, another for the chipselect. Signed-off-by:
-
Huang Shijie authored
Add two pinctrls for WEIM: one for the weim nor, another for the chipselect. Signed-off-by:
-
Huang Shijie authored
Add the clock and compatible information for the weim. Also adds the weim label. Signed-off-by:
-
Huang Shijie authored
In the imx6q-sabreauto and imx6dl-sabreauto boards, the pin MX6Q{DL}_PAD_EIM_D19 is used as a GPIO for SPI NOR, but it is used as a data pin for the WEIM NOR. In order to fix the conflict, this patch removes the pin from the hog, and adds a new board-level pinctrl: pinctrl_ecspi1_sabreauto. The SPI NOR selects this pinctrl_ecspi1_sabreauto when it is enabled. Signed-off-by: -
Huang Shijie authored
The WEIM(Wireless External Interface Module) works like a bus. You can attach many different devices on it, such as NOR, onenand. In the case of i.MX6q-sabreauto, the NOR is connected to WEIM. This patch also adds the devicetree binding document. The driver only works when the devicetree is enabled. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Markus Niebel authored
Add missing pin config Signed-off-by:
Markus Niebel <Markus.Niebel@tqs.de> Signed-off-by:
-
Steffen Trumtrar authored
use NO_PAD_CTL / 0x80000000 instead of 0x10000 to prevent misconfigured pads Signed-off-by:
-
Markus Niebel authored
Signed-off-by:
-
Markus Niebel authored
Add properties to make use of pca9554 gpio expander. Signed-off-by:
-
Markus Niebel authored
Enable the sgtl5000 found on MBa53 mainboard. Also enable audio muxer and ssi, which are needed for sound to work. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
Enable tve on MBa53. Signed-off-by:
-
Sascha Hauer authored
As the displays are optional and we have more than one, also set the status of the parallel display and the ldb to disabled. Signed-off-by:
-
Michael Olbrich authored
Signed-off-by:
Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by:
-
Steffen Trumtrar authored
Add WP/CD pinctrl for esdhc2. Also, add vmmc-supply for esdhc2. Signed-off-by:
-
