- 26 Aug, 2014 39 commits
-
-
Stefan Assmann authored
commit 781798a1 upstream. commit fa44f2f1 broke reloading of igb, when VFs are assigned to a guest, in several ways. 1. on module load adapter->vf_data does not get properly allocated, resulting in a null pointer exception when accessing adapter->vf_data in igb_reset() on module reload. modprobe -r igb ; modprobe igb max_vfs=7 [ 215.215837] igb 0000:01:00.1: removed PHC on eth1 [ 216.932072] igb 0000:01:00.1: IOV Disabled [ 216.937038] igb 0000:01:00.0: removed PHC on eth0 [ 217.127032] igb 0000:01:00.0: Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated [ 217.146178] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 217.154050] igb: Copyright (c) 2007-2013 Intel Corporation. [ 217.160688] igb 0000:01:00.0: Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface. [ 217.173703] igb 0000:01:00.0: irq 103 for MSI/MSI-X [ 217.179227] igb 0000:01:00.0: irq 104 for MSI/MSI-X [ 217.184735] igb 0000:01:00.0: irq 105 for MSI/MSI-X [ 217.220082] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 217.228846] IP: [<ffffffffa007c5e5>] igb_reset+0xc5/0x4b0 [igb] [ 217.235472] PGD 3607ec067 PUD 36170b067 PMD 0 [ 217.240461] Oops: 0002 [#1] SMP [ 217.244085] Modules linked in: igb(+) igbvf mptsas mptscsih mptbase scsi_transport_sas [last unloaded: igb] [ 217.255040] CPU: 4 PID: 4833 Comm: modprobe Not tainted 3.11.0+ #46 [...] [ 217.390007] [<ffffffffa007fab2>] igb_probe+0x892/0xfd0 [igb] [ 217.396422] [<ffffffff81470b3e>] local_pci_probe+0x1e/0x40 [ 217.402641] [<ffffffff81472029>] pci_device_probe+0xf9/0x110 [...] 2. A follow up issue, pci_enable_sriov() should only be called if no VFs were still allocated on module unload. Otherwise pci_enable_sriov() gets called multiple times in a row rendering the NIC unusable until reset. 3. simply calling igb_enable_sriov() in igb_probe_vfs() is not enough as the interrupts need to be re-setup. Switching that to igb_pci_enable_sriov(). Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Tested-by:
Sibai Li <Sibai.li@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Carolyn Wyborny authored
commit d1c17d80 upstream. This patch calls code to set the master/slave mode for all m88 gen 2 PHY's. This patch also removes the call to this function for I210 devices only from the function that is not called by I210 devices. Signed-off-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by:
Jeff Pieper <jeffrey.e.pieper@gmail.com> Signed-off-by:
-
Fujinaka, Todd authored
commit a4e979a2 upstream. Add the ethtool offline tests for i354 devices. Signed-off-by:
Todd Fujinaka <todd.fujinaka@intel.com> Tested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Russell King authored
commit dc4ff9bb upstream. The fallback to 32-bit DMA mask is rather odd: err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA configuration, aborting\n"); goto err_dma; } } } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Acked-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Don Skidmore authored
commit c7bb417d upstream. Since we are already checking for read failure in check_link we don't need to do it here. Instead just make sure the watchdog task gets scheduled, if we are up, and it can be done there. This will better follow igbvf method of handling a mailbox event and message timeout. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Don Skidmore <donald.c.skidmore@intel.com> Tested-by:
Stephen Ko <stephen.s.ko@intel.com> Signed-off-by:
-
Russell King authored
commit 53567aa4 upstream. The fallback to 32-bit DMA mask is rather odd: if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA " "configuration, aborting\n"); goto err_dma; } } pci_using_dac = 0; } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Acked-by:
-
Emil Tantilov authored
commit cf78959c upstream. This patch resolves an issue where the MTA table can be cleared when the interface is reset while in promisc mode. As result IPv6 traffic between VFs will be interrupted. This patch makes the update of the MTA table unconditional to avoid the inconsistent clearing on reset. Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
-
Jacob Keller authored
commit 27d9ce4f upstream. ixgbe_napi_disable_all calls napi_disable on each queue, however the busy polling code introduced a local_bh_disable()d context around the napi_disable. The original author did not realize that napi_disable might sleep, which would cause a sleep while atomic BUG. In addition, on a single processor system, the ixgbe_qv_lock_napi loop shouldn't have to mdelay. This patch adds an ixgbe_qv_disable along with a new IXGBE_QV_STATE_DISABLED bit, which it uses to indicate to the poll and napi routines that the q_vector has been disabled. Now the ixgbe_napi_disable_all function will wait until all pending work has been finished and prevent any future work from being started. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Cc: Eliezer Tamir <eliezer.tamir@linux.intel.com> Cc: Alexander Duyck <alexander.duyck@intel.com> Cc: Hyong-Youb Kim <hykim@myri.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Dmitry Kravkov <dmitry@broadcom.com> Tested-by:
-
Emil Tantilov authored
commit 2e010381 upstream. This patch resolves an issue where the logic used to detect changes in rx-usecs was incorrect and was masked by the call to ixgbe_update_rsc(). Setting rx-usecs between 0,2-9 and 1,10 and up requires a reset to allow ixgbe_configure_tx_ring() to set the correct value for TXDCTL.WTHRESH in order to avoid Tx hangs with BQL enabled. Signed-off-by:
-
Russell King authored
commit f5f2eda8 upstream. The fallback to 32-bit DMA mask is rather odd: if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA configuration, aborting\n"); goto err_dma; } } pci_using_dac = 0; } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Acked-by:
-
Vladimir Davydov authored
commit 74a1b1ea upstream. On e1000_down(), we should ensure every asynchronous work is canceled before proceeding. Since the watchdog_task can schedule other works apart from itself, it should be stopped first, but currently it is stopped after the reset_task. This can result in the following race leading to the reset_task running after the module unload: e1000_down_and_stop(): e1000_watchdog(): ---------------------- ----------------- cancel_work_sync(reset_task) schedule_work(reset_task) cancel_delayed_work_sync(watchdog_task) The patch moves cancel_delayed_work_sync(watchdog_task) at the beginning of e1000_down_and_stop() thus ensuring the race is impossible. Cc: Tushar Dave <tushar.n.dave@intel.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Tested-by:
-
yzhu1 authored
commit 6a7d64e3 upstream. This change is based on a similar change made to e1000e support in commit bb9e44d0 ("e1000e: prevent oops when adapter is being closed and reset simultaneously"). The same issue has also been observed on the older e1000 cards. Here, we have increased the RESET_COUNT value to 50 because there are too many accesses to e1000 nic on stress tests to e1000 nic, it is not enough to set RESET_COUT 25. Experimentation has shown that it is enough to set RESET_COUNT 50. Signed-off-by:
yzhu1 <yanjun.zhu@windriver.com> Tested-by:
-
Hong Zhiguo authored
commit 49a45a06 upstream. tx_ring and adapter->tx_ring are already of type "struct e1000_tx_ring *" Signed-off-by:
Hong Zhiguo <zhiguohong@tencent.com> Tested-by:
-
Mika Westerberg authored
commit 38a529b5 upstream. Commit 7509963c (e1000e: Fix a compile flag mis-match for suspend/resume) moved suspend and resume hooks to be available when CONFIG_PM is set. However, it can be set even if CONFIG_PM_SLEEP is not set causing following warnings to be emitted: drivers/net/ethernet/intel/e1000e/netdev.c:6178:12: warning: ‘e1000_suspend’ defined but not used [-Wunused-function] drivers/net/ethernet/intel/e1000e/netdev.c:6185:12: warning: ‘e1000_resume’ defined but not used [-Wunused-function] To fix this make the hooks to be available only when CONFIG_PM_SLEEP is set and remove CONFIG_PM wrapping from driver ops because this is already handled by SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS(). Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Dave Ertman <davidx.m.ertman@intel.com> Cc: Aaron Brown <aaron.f.brown@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
David Ertman authored
commit 7509963c upstream. This patch addresses a mis-match between the declaration and usage of the e1000_suspend and e1000_resume functions. Previously, these functions were declared in a CONFIG_PM_SLEEP wrapper, and then utilized within a CONFIG_PM wrapper. Both the declaration and usage will now be contained within CONFIG_PM wrappers. Signed-off-by:
Dave Ertman <davidx.m.ertman@intel.com> Tested-by:
-
Russell King authored
commit 718a39eb upstream. The fallback to 32-bit DMA mask is rather odd: err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA configuration, aborting\n"); goto err_dma; } } } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Acked-by:
-
Russell King authored
commit 4aa806b7 upstream. Provide a helper to set both the DMA and coherent DMA masks to the same value - this avoids duplicated code in a number of drivers, sometimes with buggy error handling, and also allows us identify which drivers do things differently. Signed-off-by:
-
Keith Packard authored
commit 5f4dc28b upstream. When FB_EVENT_FB_UNBIND is sent, fbcon has two paths, one path taken when there is another frame buffer to switch any affected vcs to and another path when there isn't. In the case where there is another frame buffer to use, fbcon_fb_unbind calls set_con2fb_map to remap all of the affected vcs to the replacement frame buffer. set_con2fb_map will eventually call con2fb_release_oldinfo when the last vcs gets unmapped from the old frame buffer. con2fb_release_oldinfo frees the fbcon data that is hooked off of the fb_info structure, including the cursor timer. In the case where there isn't another frame buffer to use, fbcon_fb_unbind simply calls fbcon_unbind, which doesn't clear the con2fb_map or free the fbcon data hooked from the fb_info structure. In particular, it doesn't stop the cursor blink timer. When the fb_info structure is then freed, we end up with a timer queue pointing into freed memory and "bad things" start happening. This patch first changes con2fb_release_oldinfo so that it can take a NULL pointer for the new frame buffer, but still does all of the deallocation and cursor timer cleanup. Finally, the patch tries to replicate some of what set_con2fb_map does by clearing the con2fb_map for the affected vcs and calling the modified con2fb_release_info function to clean up the fb_info structure. Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Cedric Le Goater authored
commit 212c0cbd upstream. The "screen" properties : depth, width, height, linebytes need to be converted to the host endian order when read from the device tree. The offb_init_palette_hacks() routine also made assumption on the host endian order. Signed-off-by:
Cédric Le Goater <clg@fr.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Jan Kara authored
commit 77ea2a4b upstream. free_holes_block() passed local variable as a block pointer to ext4_clear_blocks(). Thus ext4_clear_blocks() zeroed out this local variable instead of proper place in inode / indirect block. We later zero out proper place in inode / indirect block but don't dirty the inode / buffer again which can lead to subtle issues (some changes e.g. to inode can be lost). Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Eric W. Biederman authored
commit 9566d674 upstream. While invesgiating the issue where in "mount --bind -oremount,ro ..." would result in later "mount --bind -oremount,rw" succeeding even if the mount started off locked I realized that there are several additional mount flags that should be locked and are not. In particular MNT_NOSUID, MNT_NODEV, MNT_NOEXEC, and the atime flags in addition to MNT_READONLY should all be locked. These flags are all per superblock, can all be changed with MS_BIND, and should not be changable if set by a more privileged user. The following additions to the current logic are added in this patch. - nosuid may not be clearable by a less privileged user. - nodev may not be clearable by a less privielged user. - noexec may not be clearable by a less privileged user. - atime flags may not be changeable by a less privileged user. The logic with atime is that always setting atime on access is a global policy and backup software and auditing software could break if atime bits are not updated (when they are configured to be updated), and serious performance degradation could result (DOS attack) if atime updates happen when they have been explicitly disabled. Therefore an unprivileged user should not be able to mess with the atime bits set by a more privileged user. The additional restrictions are implemented with the addition of MNT_LOCK_NOSUID, MNT_LOCK_NODEV, MNT_LOCK_NOEXEC, and MNT_LOCK_ATIME mnt flags. Taken together these changes and the fixes for MNT_LOCK_READONLY should make it safe for an unprivileged user to create a user namespace and to call "mount --bind -o remount,... ..." without the danger of mount flags being changed maliciously. Cc: stable@vger.kernel.org Acked-by:
Serge E. Hallyn <serge.hallyn@ubuntu.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit 07b64558 upstream. There are no races as locked mount flags are guaranteed to never change. Moving the test into do_remount makes it more visible, and ensures all filesystem remounts pass the MNT_LOCK_READONLY permission check. This second case is not an issue today as filesystem remounts are guarded by capable(CAP_DAC_ADMIN) and thus will always fail in less privileged mount namespaces, but it could become an issue in the future. Cc: stable@vger.kernel.org Acked-by:
-
Eric W. Biederman authored
commit a6138db8 upstream. Kenton Varda <kenton@sandstorm.io> discovered that by remounting a read-only bind mount read-only in a user namespace the MNT_LOCK_READONLY bit would be cleared, allowing an unprivileged user to the remount a read-only mount read-write. Correct this by replacing the mask of mount flags to preserve with a mask of mount flags that may be changed, and preserve all others. This ensures that any future bugs with this mask and remount will fail in an easy to detect way where new mount flags simply won't change. Cc: stable@vger.kernel.org Acked-by:
-
Naoya Horiguchi authored
commit 0253d634 upstream. Commit 4a705fef ("hugetlb: fix copy_hugetlb_page_range() to handle migration/hwpoisoned entry") changed the order of huge_ptep_set_wrprotect() and huge_ptep_get(), which leads to breakage in some workloads like hugepage-backed heap allocation via libhugetlbfs. This patch fixes it. The test program for the problem is shown below: $ cat heap.c #include <unistd.h> #include <stdlib.h> #include <string.h> #define HPS 0x200000 int main() { int i; char *p = malloc(HPS); memset(p, '1', HPS); for (i = 0; i < 5; i++) { if (!fork()) { memset(p, '2', HPS); p = malloc(HPS); memset(p, '3', HPS); free(p); return 0; } } sleep(1); free(p); return 0; } $ export HUGETLB_MORECORE=yes ; export HUGETLB_NO_PREFAULT= ; hugectl --heap ./heap Fixes 4a705fef ("hugetlb: fix copy_hugetlb_page_range() to handle migration/hwpoisoned entry"), so is applicable to -stable kernels which include it. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by:
Guillaume Morin <guillaume@morinfr.org> Suggested-by:
Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [2.6.37+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Naoya Horiguchi authored
commit 4a705fef upstream. There's a race between fork() and hugepage migration, as a result we try to "dereference" a swap entry as a normal pte, causing kernel panic. The cause of the problem is that copy_hugetlb_page_range() can't handle "swap entry" family (migration entry and hwpoisoned entry) so let's fix it. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Eliad Peller authored
commit 448cd2e2 upstream. In case of beacon_loss with IEEE80211_HW_CONNECTION_MONITOR device, mac80211 probes the ap (and disconnects on timeout) but ignores the ack. If we already got an ack, there's no reason to continue disconnecting. this can help devices that supports IEEE80211_HW_CONNECTION_MONITOR only partially (e.g. take care of keep alives, but does not probe the ap. In case the device wants to disconnect without probing, it can just call ieee80211_connection_loss. Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Ilan Peer authored
commit 12d423e8 upstream. Instead of always calling ieee80211_beacon_loss() on every missed beacons notification, call this function only if the number of consecutive missed beacons from last rx is higher than a predefined threshold. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Andrey Utkin authored
[ Upstream commit 093758e3 ] This commit is a guesswork, but it seems to make sense to drop this break, as otherwise the following line is never executed and becomes dead code. And that following line actually saves the result of local calculation by the pointer given in function argument. So the proposed change makes sense if this code in the whole makes sense (but I am unable to analyze it in the whole). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81641Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by:
-
Sowmini Varadhan authored
[ Upstream commit 4ec1b010 ] The LDC handshake could have been asynchronously triggered after ldc_bind() enables the ldc_rx() receive interrupt-handler (and thus intercepts incoming control packets) and before vio_port_up() calls ldc_connect(). If that is the case, ldc_connect() should return 0 and let the state-machine progress. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Karl Volz <karl.volz@oracle.com> Signed-off-by:
-
Christopher Alexander Tobias Schulze authored
[ Upstream commit fe418231 ] Fix detection of BREAK on sunsab serial console: BREAK detection was only performed when there were also serial characters received simultaneously. To handle all BREAKs correctly, the check for BREAK and the corresponding call to uart_handle_break() must also be done if count == 0, therefore duplicate this code fragment and pull it out of the loop over the received characters. Patch applies to 3.16-rc6. Signed-off-by:
Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net> Signed-off-by:
-
Christopher Alexander Tobias Schulze authored
[ Upstream commit 5cdceab3 ] Fix regression in bbc i2c temperature and fan control on some Sun systems that causes the driver to refuse to load due to the bbc_i2c_bussel resource not being present on the (second) i2c bus where the temperature sensors and fan control are located. (The check for the number of resources was removed when the driver was ported to a pure OF driver in mid 2008.) Signed-off-by:
-
David S. Miller authored
[ Upstream commit 4ca9a237 ] Based almost entirely upon a patch by Christopher Alexander Tobias Schulze. In commit db64fe02 ("mm: rewrite vmap layer") lazy VMAP tlb flushing was added to the vmalloc layer. This causes problems on sparc64. Sparc64 has two VMAP mapped regions and they are not contiguous with eachother. First we have the malloc mapping area, then another unrelated region, then the vmalloc region. This "another unrelated region" is where the firmware is mapped. If the lazy TLB flushing logic in the vmalloc code triggers after we've had both a module unload and a vfree or similar, it will pass an address range that goes from somewhere inside the malloc region to somewhere inside the vmalloc region, and thus covering the openfirmware area entirely. The sparc64 kernel learns about openfirmware's dynamic mappings in this region early in the boot, and then services TLB misses in this area. But openfirmware has some locked TLB entries which are not mentioned in those dynamic mappings and we should thus not disturb them. These huge lazy TLB flush ranges causes those openfirmware locked TLB entries to be removed, resulting in all kinds of problems including hard hangs and crashes during reboot/reset. Besides causing problems like this, such huge TLB flush ranges are also incredibly inefficient. A plea has been made with the author of the VMAP lazy TLB flushing code, but for now we'll put a safety guard into our flush_tlb_kernel_range() implementation. Since the implementation has become non-trivial, stop defining it as a macro and instead make it a function in a C source file. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 18f38132 ] The assumption was that update_mmu_cache() (and the equivalent for PMDs) would only be called when the PTE being installed will be accessible by the user. This is not true for code paths originating from remove_migration_pte(). There are dire consequences for placing a non-valid PTE into the TSB. The TLB miss frramework assumes thatwhen a TSB entry matches we can just load it into the TLB and return from the TLB miss trap. So if a non-valid PTE is in there, we will deadlock taking the TLB miss over and over, never satisfying the miss. Just exit early from update_mmu_cache() and friends in this situation. Based upon a report and patch from Christopher Alexander Tobias Schulze. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 5aa4ecfd ] This is the prevent previous stores from overlapping the block stores done by the memcpy loop. Based upon a glibc patch by Jose E. Marchesi Signed-off-by:
-
David S. Miller authored
[ Upstream commit b18eb2d7 ] Access to the TSB hash tables during TLB misses requires that there be an atomic 128-bit quad load available so that we fetch a matching TAG and DATA field at the same time. On cpus prior to UltraSPARC-III only virtual address based quad loads are available. UltraSPARC-III and later provide physical address based variants which are easier to use. When we only have virtual address based quad loads available this means that we have to lock the TSB into the TLB at a fixed virtual address on each cpu when it runs that process. We can't just access the PAGE_OFFSET based aliased mapping of these TSBs because we cannot take a recursive TLB miss inside of the TLB miss handler without risking running out of hardware trap levels (some trap combinations can be deep, such as those generated by register window spill and fill traps). Without huge pages it's working perfectly fine, but when the huge TSB got added another chunk of fixed virtual address space was not allocated for this second TSB mapping. So we were mapping both the 8K and 4MB TSBs to the same exact virtual address, causing multiple TLB matches which gives undefined behavior. Signed-off-by:
-
David S. Miller authored
[ Upstream commit e5c460f4 ] This was found using Dave Jone's trinity tool. When a user process which is 32-bit performs a load or a store, the cpu chops off the top 32-bits of the effective address before translating it. This is because we run 32-bit tasks with the PSTATE_AM (address masking) bit set. We can't run the kernel with that bit set, so when the kernel accesses userspace no address masking occurs. Since a 32-bit process will have no mappings in that region we will properly fault, so we don't try to handle this using access_ok(), which can safely just be a NOP on sparc64. Real faults from 32-bit processes should never generate such addresses so a bug check was added long ago, and it barks in the logs if this happens. But it also barks when a kernel user access causes this condition, and that _can_ happen. For example, if a pointer passed into a system call is "0xfffffffc" and the kernel access 4 bytes offset from that pointer. Just handle such faults normally via the exception entries. Signed-off-by:
-
David S. Miller authored
[ Upstream commit fe866433 ] pte_ERROR() is not used anywhere, delete it. For pgd_ERROR() and pmd_ERROR(), output something similar to x86, giving the address of the pgd/pmd as well as it's value. Also provide the caller, since these macros are invoked from pgd_clear_bad() and pmd_clear_bad() which provides little context as to what high level operation was occuring when the BAD state was detected. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 70ffc6eb ] Make get_user_insn() able to cope with huge PMDs. Next, make do_fault_siginfo() more robust when get_user_insn() can't actually fetch the instruction. In particular, use the MMU announced fault address when that happens, instead of calling compute_effective_address() and computing garbage. Signed-off-by:
-
David S. Miller authored
[ Upstream commit d037d163 ] If we have a 32-bit task we must chop off the top 32-bits of the 64-bit value just as the cpu would. Signed-off-by:
-
- 19 Aug, 2014 1 commit
-
-
Kirill Tkhai authored
[ Upstream commit 49b6c01f ] One more place where we must not be able to be preempted or to be interrupted in RT. Always actually disable interrupts during synchronization cycle. Signed-off-by:
Kirill Tkhai <tkhai@yandex.ru> Signed-off-by:
-
