- 24 Jul, 2017 7 commits
-
-
Phil Sutter authored
During concurrent access testing, threadfunc() concatenated thread ID and object index to create a unique key like so: | tdata->objs[i].value = (tdata->id << 16) | i; This breaks if a user passes an entries parameter of 64k or higher, since 'i' might use more than 16 bits then. Effectively, this will lead to duplicate keys in the table. Fix the problem by introducing a struct holding object and thread ID and using that as key instead of a single integer type field. Fixes: f4a3e90b ("rhashtable-test: extend to test concurrency") Reported by: Manuel Messner <mm@skelett.io> Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Edward Cree says: ==================== bpf: fix verifier min/max handling in BPF_SUB I managed to come up with a test for the swapped bounds in BPF_SUB, so here it is along with a patch that fixes it, separated out from my 'rewrite everything' series so it can go to -stable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Edward Cree authored
We have to subtract the src max from the dst min, and vice-versa, since (e.g.) the smallest result comes from the largest subtrahend. Fixes: 48461135 ("bpf: allow access into map value arrays") Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Edward Cree authored
There is a bug in the verifier's handling of BPF_SUB: [a,b] - [c,d] yields was [a-c, b-d] rather than the correct [a-d, b-c]. So here is a test which, with the bogus handling, will produce ranges of [0,0] and thus allowed accesses; whereas the correct handling will give a range of [-255, 255] (and hence the right-shift will give a range of [0, 255]) and the accesses will be rejected. Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mark Brown authored
The mediatek ethernet driver uses interrupts but does not explicitly include linux/interrupt.h, relying on implicit includes. Fix this so we don't get build breaks as happened for ARM in next-20170720. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tonghao Zhang authored
There is some codes of tun/tap module which did not check the return value of register_netdevice_notifier. Add the check now. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sean Wang authored
Potential dangerous invalid memory might be accessed if invalid mac value reflected from the forward port field in rxd4 caused by possible potential hardware defects. So added a simple sanity checker to avoid the kind of situation happening. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Jul, 2017 26 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) BPF verifier signed/unsigned value tracking fix, from Daniel Borkmann, Edward Cree, and Josef Bacik. 2) Fix memory allocation length when setting up calls to ->ndo_set_mac_address, from Cong Wang. 3) Add a new cxgb4 device ID, from Ganesh Goudar. 4) Fix FIB refcount handling, we have to set it's initial value before the configure callback (which can bump it). From David Ahern. 5) Fix double-free in qcom/emac driver, from Timur Tabi. 6) A bunch of gcc-7 string format overflow warning fixes from Arnd Bergmann. 7) Fix link level headroom tests in ip_do_fragment(), from Vasily Averin. 8) Fix chunk walking in SCTP when iterating over error and parameter headers. From Alexander Potapenko. 9) TCP BBR congestion control fixes from Neal Cardwell. 10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger. 11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong Wang. 12) xmit_recursion in ppp driver needs to be per-device not per-cpu, from Gao Feng. 13) Cannot release skb->dst in UDP if IP options processing needs it. From Paolo Abeni. 14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander Levin and myself. 15) Revert some rtnetlink notification changes that are causing regressions, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits) net: bonding: Fix transmit load balancing in balance-alb mode rds: Make sure updates to cp_send_gen can be observed net: ethernet: ti: cpsw: Push the request_irq function to the end of probe ipv4: initialize fib_trie prior to register_netdev_notifier call. rtnetlink: allocate more memory for dev_set_mac_address() net: dsa: b53: Add missing ARL entries for BCM53125 bpf: more tests for mixed signed and unsigned bounds checks bpf: add test for mixed signed and unsigned bounds checks bpf: fix up test cases with mixed signed/unsigned bounds bpf: allow to specify log level and reduce it for test_verifier bpf: fix mixed signed/unsigned derived min/max value bounds ipv6: avoid overflow of offset in ip6_find_1stfragopt net: tehuti: don't process data if it has not been copied from userspace Revert "rtnetlink: Do not generate notifications for CHANGEADDR event" net: dsa: mv88e6xxx: Enable CMODE config support for 6390X dt-binding: ptp: Add SoC compatibility strings for dte ptp clock NET: dwmac: Make dwmac reset unconditional net: Zero terminate ifr_name in dev_ifname(). wireless: wext: terminate ifr name coming from userspace netfilter: fix netfilter_net_init() return ...
-
Kosuke Tatsukawa authored
balance-alb mode used to have transmit dynamic load balancing feature enabled by default. However, transmit dynamic load balancing no longer works in balance-alb after commit 8b426dc5 ("bonding: remove hardcoded value"). Both balance-tlb and balance-alb use the function bond_do_alb_xmit() to send packets. This function uses the parameter tlb_dynamic_lb. tlb_dynamic_lb used to have the default value of 1 for balance-alb, but now the value is set to 0 except in balance-tlb. Re-enable transmit dyanmic load balancing by initializing tlb_dynamic_lb for balance-alb similar to balance-tlb. Fixes: 8b426dc5 ("bonding: remove hardcoded value") Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Håkon Bugge authored
cp->cp_send_gen is treated as a normal variable, although it may be used by different threads. This is fixed by using {READ,WRITE}_ONCE when it is incremented and READ_ONCE when it is read outside the {acquire,release}_in_xmit protection. Normative reference from the Linux-Kernel Memory Model: Loads from and stores to shared (but non-atomic) variables should be protected with the READ_ONCE(), WRITE_ONCE(), and ACCESS_ONCE(). Clause 5.1.2.4/25 in the C standard is also relevant. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Knut Omang <knut.omang@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Keerthy authored
Push the request_irq function to the end of probe so as to ensure all the required fields are populated in the event of an ISR getting executed right after requesting the irq. Currently while loading the crash kernel a crash was seen as soon as devm_request_threaded_irq was called. This was due to n->poll being NULL which is called as part of net_rx_action function. Suggested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mahesh Bandewar authored
Net stack initialization currently initializes fib-trie after the first call to netdevice_notifier() call. In fact fib_trie initialization needs to happen before first rtnl_register(). It does not cause any problem since there are no devices UP at this moment, but trying to bring 'lo' UP at initialization would make this assumption wrong and exposes the issue. Fixes following crash Call Trace: ? alternate_node_alloc+0x76/0xa0 fib_table_insert+0x1b7/0x4b0 fib_magic.isra.17+0xea/0x120 fib_add_ifaddr+0x7b/0x190 fib_netdev_event+0xc0/0x130 register_netdevice_notifier+0x1c1/0x1d0 ip_fib_init+0x72/0x85 ip_rt_init+0x187/0x1e9 ip_init+0xe/0x1a inet_init+0x171/0x26c ? ipv4_offload_init+0x66/0x66 do_one_initcall+0x43/0x160 kernel_init_freeable+0x191/0x219 ? rest_init+0x80/0x80 kernel_init+0xe/0x150 ret_from_fork+0x22/0x30 Code: f6 46 23 04 74 86 4c 89 f7 e8 ae 45 01 00 49 89 c7 4d 85 ff 0f 85 7b ff ff ff 31 db eb 08 4c 89 ff e8 16 47 01 00 48 8b 44 24 38 <45> 8b 6e 14 4d 63 76 74 48 89 04 24 0f 1f 44 00 00 48 83 c4 08 RIP: kmem_cache_alloc+0xcf/0x1c0 RSP: ffff9b1500017c28 CR2: 0000000000000014 Fixes: 7b1a74fd ("[NETNS]: Refactor fib initialization so it can handle multiple namespaces.") Fixes: 7f9b8052 ("[IPV4]: fib hash|trie initialization") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
WANG Cong authored
virtnet_set_mac_address() interprets mac address as struct sockaddr, but upper layer only allocates dev->addr_len which is ETH_ALEN + sizeof(sa_family_t) in this case. We lack a unified definition for mac address, so just fix the upper layer, this also allows drivers to interpret it to struct sockaddr freely. Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
The BCM53125 entry was missing an arl_entries member which would basically prevent the ARL search from terminating properly. This switch has 4 ARL entries, so add that. Fixes: 1da6df85 ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF map value adjust fix First patch in the series is the actual fix and the remaining patches are just updates to selftests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Add a couple of more test cases to BPF selftests that are related to mixed signed and unsigned checks. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Edward Cree authored
These failed due to a bug in verifier bounds handling. Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Fix the few existing test cases that used mixed signed/unsigned bounds and switch them only to one flavor. Reason why we need this is that proper boundaries cannot be derived from mixed tests. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
For the test_verifier case, it's quite hard to parse log level 2 to figure out what's causing an issue when used to log level 1. We do want to use bpf_verify_program() in order to simulate some of the tests with strict alignment. So just add an argument to pass the level and put it to 1 for test_verifier. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Edward reported that there's an issue in min/max value bounds tracking when signed and unsigned compares both provide hints on limits when having unknown variables. E.g. a program such as the following should have been rejected: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff8a94cda93400 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 11: (65) if r1 s> 0x1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=0,max_value=1 R1=inv,min_value=0,max_value=1 R2=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 14: (b7) r0 = 0 15: (95) exit What happens is that in the first part ... 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = -1 10: (2d) if r1 > r2 goto pc+3 ... r1 carries an unsigned value, and is compared as unsigned against a register carrying an immediate. Verifier deduces in reg_set_min_max() that since the compare is unsigned and operation is greater than (>), that in the fall-through/false case, r1's minimum bound must be 0 and maximum bound must be r2. Latter is larger than the bound and thus max value is reset back to being 'invalid' aka BPF_REGISTER_MAX_RANGE. Thus, r1 state is now 'R1=inv,min_value=0'. The subsequent test ... 11: (65) if r1 s> 0x1 goto pc+2 ... is a signed compare of r1 with immediate value 1. Here, verifier deduces in reg_set_min_max() that since the compare is signed this time and operation is greater than (>), that in the fall-through/false case, we can deduce that r1's maximum bound must be 1, meaning with prior test, we result in r1 having the following state: R1=inv,min_value=0,max_value=1. Given that the actual value this holds is -8, the bounds are wrongly deduced. When this is being added to r0 which holds the map_value(_adj) type, then subsequent store access in above case will go through check_mem_access() which invokes check_map_access_adj(), that will then probe whether the map memory is in bounds based on the min_value and max_value as well as access size since the actual unknown value is min_value <= x <= max_value; commit fce366a9 ("bpf, verifier: fix alu ops against map_value{, _adj} register types") provides some more explanation on the semantics. It's worth to note in this context that in the current code, min_value and max_value tracking are used for two things, i) dynamic map value access via check_map_access_adj() and since commit 06c1c049 ("bpf: allow helpers access to variable memory") ii) also enforced at check_helper_mem_access() when passing a memory address (pointer to packet, map value, stack) and length pair to a helper and the length in this case is an unknown value defining an access range through min_value/max_value in that case. The min_value/max_value tracking is /not/ used in the direct packet access case to track ranges. However, the issue also affects case ii), for example, the following crafted program based on the same principle must be rejected as well: 0: (b7) r2 = 0 1: (bf) r3 = r10 2: (07) r3 += -512 3: (7a) *(u64 *)(r10 -16) = -8 4: (79) r4 = *(u64 *)(r10 -16) 5: (b7) r6 = -1 6: (2d) if r4 > r6 goto pc+5 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 7: (65) if r4 s> 0x1 goto pc+4 R1=ctx R2=imm0,min_value=0,max_value=0,min_align=2147483648 R3=fp-512 R4=inv,min_value=0,max_value=1 R6=imm-1,max_value=18446744073709551615,min_align=1 R10=fp 8: (07) r4 += 1 9: (b7) r5 = 0 10: (6a) *(u16 *)(r10 -512) = 0 11: (85) call bpf_skb_load_bytes#26 12: (b7) r0 = 0 13: (95) exit Meaning, while we initialize the max_value stack slot that the verifier thinks we access in the [1,2] range, in reality we pass -7 as length which is interpreted as u32 in the helper. Thus, this issue is relevant also for the case of helper ranges. Resetting both bounds in check_reg_overflow() in case only one of them exceeds limits is also not enough as similar test can be created that uses values which are within range, thus also here learned min value in r1 is incorrect when mixed with later signed test to create a range: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff880ad081fa00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+7 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+3 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (65) if r1 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 12: (0f) r0 += r1 13: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=3,max_value=4 R1=inv,min_value=3,max_value=4 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 14: (b7) r0 = 0 15: (95) exit This leaves us with two options for fixing this: i) to invalidate all prior learned information once we switch signed context, ii) to track min/max signed and unsigned boundaries separately as done in [0]. (Given latter introduces major changes throughout the whole verifier, it's rather net-next material, thus this patch follows option i), meaning we can derive bounds either from only signed tests or only unsigned tests.) There is still the case of adjust_reg_min_max_vals(), where we adjust bounds on ALU operations, meaning programs like the following where boundaries on the reg get mixed in context later on when bounds are merged on the dst reg must get rejected, too: 0: (7a) *(u64 *)(r10 -8) = 0 1: (bf) r2 = r10 2: (07) r2 += -8 3: (18) r1 = 0xffff89b2bf87ce00 5: (85) call bpf_map_lookup_elem#1 6: (15) if r0 == 0x0 goto pc+6 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R10=fp 7: (7a) *(u64 *)(r10 -16) = -8 8: (79) r1 = *(u64 *)(r10 -16) 9: (b7) r2 = 2 10: (3d) if r2 >= r1 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R10=fp 11: (b7) r7 = 1 12: (65) if r7 s> 0x0 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,max_value=0 R10=fp 13: (b7) r0 = 0 14: (95) exit from 12 to 15: R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=imm1,min_value=1 R10=fp 15: (0f) r7 += r1 16: (65) if r7 s> 0x4 goto pc+2 R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 17: (0f) r0 += r7 18: (72) *(u8 *)(r0 +0) = 0 R0=map_value_adj(ks=8,vs=8,id=0),min_value=4,max_value=4 R1=inv,min_value=3 R2=imm2,min_value=2,max_value=2,min_align=2 R7=inv,min_value=4,max_value=4 R10=fp 19: (b7) r0 = 0 20: (95) exit Meaning, in adjust_reg_min_max_vals() we must also reset range values on the dst when src/dst registers have mixed signed/ unsigned derived min/max value bounds with one unbounded value as otherwise they can be added together deducing false boundaries. Once both boundaries are established from either ALU ops or compare operations w/o mixing signed/unsigned insns, then they can safely be added to other regs also having both boundaries established. Adding regs with one unbounded side to a map value where the bounded side has been learned w/o mixing ops is possible, but the resulting map value won't recover from that, meaning such op is considered invalid on the time of actual access. Invalid bounds are set on the dst reg in case i) src reg, or ii) in case dst reg already had them. The only way to recover would be to perform i) ALU ops but only 'add' is allowed on map value types or ii) comparisons, but these are disallowed on pointers in case they span a range. This is fine as only BPF_JEQ and BPF_JNE may be performed on PTR_TO_MAP_VALUE_OR_NULL registers which potentially turn them into PTR_TO_MAP_VALUE type depending on the branch, so only here min/max value cannot be invalidated for them. In terms of state pruning, value_from_signed is considered as well in states_equal() when dealing with adjusted map values. With regards to breaking existing programs, there is a small risk, but use-cases are rather quite narrow where this could occur and mixing compares probably unlikely. Joint work with Josef and Edward. [0] https://lists.iovisor.org/pipermail/iovisor-dev/2017-June/000822.html Fixes: 48461135 ("bpf: allow access into map value arrays") Reported-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These are two stable-candidate fixes for the intel_pstate driver and the generic power domains (genpd) framework. Specifics: - Fix the average CPU load computations in the intel_pstate driver on Knights Landing (Xeon Phi) processors that require an extra factor to compensate for a rate change differences between the TSC and MPERF which is missing (Srinivas Pandruvada). - Fix an initialization ordering issue in the generic power domains (genpd) framework (Sudeep Holla)" * tag 'pm-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present cpufreq: intel_pstate: Correct the busy calculation for KNL
-
Linus Torvalds authored
They really are, and the "take the address of a single character" makes the string fortification code unhappy (it believes that you can now only acccess one byte, rather than a byte range, and then raises errors for the memory copies going on in there). We could now remove a few 'addressof' operators (since arrays naturally degrade to pointers), but this is the minimal patch that just changes the C prototypes of those template arrays (the templates themselves are defined in inline asm). Reported-by: kernel test robot <xiaolong.ye@intel.com> Acked-and-tested-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull misc filesystem fixes from Jan Kara: "Several ACL related fixes for ext2, reiserfs, and hfsplus. And also one minor isofs cleanup" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: hfsplus: Don't clear SGID when inheriting ACLs isofs: Fix off-by-one in 'session' mount option parsing reiserfs: preserve i_mode if __reiserfs_set_acl() fails ext2: preserve i_mode if ext2_set_acl() fails ext2: Don't clear SGID when inheriting ACLs reiserfs: Don't clear SGID when inheriting ACLs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs fixes from Jaegeuk Kim: "We've filed some bug fixes: - missing f2fs case in terms of stale SGID bit, introduced by Jan - build error for seq_file.h - avoid cpu lockup - wrong inode_unlock in error case" * tag 'for-f2fs-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: avoid cpu lockup f2fs: include seq_file.h for sysfs.c f2fs: Don't clear SGID when inheriting ACLs f2fs: remove extra inode_unlock() in error path
-
git://git.infradead.org/users/pcmoore/auditLinus Torvalds authored
Pull audit fix from Paul Moore: "A small audit fix, just a single line, to plug a memory leak in some audit error handling code" * 'stable-4.13' of git://git.infradead.org/users/pcmoore/audit: audit: fix memleak in auditd_send_unicast_skb.
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "A handful of small fixes for 4.13-rc2. Three of these fixes are tagged for -stable. They have all appeared in at least one -next release with no reported issues - Fix handling of media errors that span a sector - Fix support of multiple namespaces in a libnvdimm region being in device-dax mode - Clean up the machine check notifier properly when the nfit driver fails to register - Address a static analysis (smatch) report in device-dax" * tag 'libnvdimm-fixes-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix sysfs duplicate warnings MAINTAINERS: list drivers/acpi/nfit/ files for libnvdimm sub-system acpi/nfit: Fix memory corruption/Unregister mce decoder on failure device-dax: fix 'passing zero to ERR_PTR()' warning libnvdimm: fix badblock range handling of ARS range
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - HID multitouch 4.12 regression fix from Dmitry Torokhov - error handling fix for HID++ driver from Gustavo A. R. Silva * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-logitech-hidpp: add NULL check on devm_kmemdup() return value HID: multitouch: do not blindly set EV_KEY or EV_ABS bits
-
Rafael J. Wysocki authored
* intel_pstate: cpufreq: intel_pstate: Correct the busy calculation for KNL * pm-domains: PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
-
Gustavo A. R. Silva authored
Check return value from call to devm_kmemdup() in order to prevent a NULL pointer dereference. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
Sabrina Dubroca authored
In some cases, offset can overflow and can cause an infinite loop in ip6_find_1stfragopt(). Make it unsigned int to prevent the overflow, and cap it at IPV6_MAXPLEN, since packets larger than that should be invalid. This problem has been here since before the beginning of git history. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The array data is only populated with valid information from userspace if cmd != SIOCDEVPRIVATE, other cases the array contains garbage on the stack. The subsequent switch statement acts on a subcommand in data[0] which could be any garbage value if cmd is SIOCDEVPRIVATE which seems incorrect to me. Instead, just return EOPNOTSUPP for the case where cmd == SIOCDEVPRIVATE to avoid this issue. As a side note, I suspect that the original intention of the code was for this ioctl to work just for cmd == SIOCDEVPRIVATE (and the current logic is reversed). However, I don't wont to change the current semantics in case any userspace code relies on this existing behaviour. Detected by CoverityScan, CID#139647 ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
This reverts commit cd8966e7. The duplicate CHANGEADDR event message is sent regardless of link status whereas the setlink changes only generate a notification when the link is up. Not sending a notification when the link is down breaks dhcpcd which only processes hwaddr changes when the link is down. Fixes reported regression: https://bugzilla.kernel.org/show_bug.cgi?id=196355Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin Hundebøll authored
Commit f39908d3 ('net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10') added support for setting the CMODE for the 6390X family, but only enabled it for 9290 and 6390 - and left out 6390X. Fix support for setting the CMODE on 6390X also by assigning mv88e6390x_port_set_cmode() to the .port_set_cmode function pointer in mv88e6390x_ops too. Fixes: f39908d3 ("net: dsa: mv88e6xxx: Set the CMODE for mv88e6390 ports 9 & 10") Signed-off-by: Martin Hundebøll <mnhu@prevas.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Jul, 2017 7 commits
-
-
Arun Parameswaran authored
Add SoC specific compatibility strings to the Broadcom DTE based PTP clock binding document. Fixed the document heading and node name. Fixes: 80d60761 ("dt-binding: ptp: add bindings document for dte based ptp clock") Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Potapenko authored
Currently llist_for_each_entry() and llist_for_each_entry_safe() iterate until &pos->member != NULL. But when building the kernel with Clang, the compiler assumes &pos->member cannot be NULL if the member's offset is greater than 0 (which would be equivalent to the object being non-contiguous in memory). Therefore the loop condition is always true, and the loops become infinite. To work around this, introduce the member_address_is_nonnull() macro, which casts object pointer to uintptr_t, thus letting the member pointer to be NULL. Signed-off-by: Alexander Potapenko <glider@google.com> Tested-by: Sodagudi Prasad <psodagud@codeaurora.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eugeniy Paltsev authored
Unconditional reset dwmac before HW init if reset controller is present. In existing implementation we reset dwmac only after second module probing: (module load -> unload -> load again [reset happens]) Now we reset dwmac at every module load: (module load [reset happens] -> unload -> load again [reset happens]) Also some reset controllers have only reset callback instead of assert + deassert callbacks pair, so handle this case. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
The ifr.ifr_name is passed around and assumed to be NULL terminated. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Levin, Alexander authored
ifr name is assumed to be a valid string by the kernel, but nothing was forcing username to pass a valid string. In turn, this would cause panics as we tried to access the string past it's valid memory. Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull structure randomization updates from Kees Cook: "Now that IPC and other changes have landed, enable manual markings for randstruct plugin, including the task_struct. This is the rest of what was staged in -next for the gcc-plugins, and comes in three patches, largest first: - mark "easy" structs with __randomize_layout - mark task_struct with an optional anonymous struct to isolate the __randomize_layout section - mark structs to opt _out_ of automated marking (which will come later) And, FWIW, this continues to pass allmodconfig (normal and patched to enable gcc-plugins) builds of x86_64, i386, arm64, arm, powerpc, and s390 for me" * tag 'gcc-plugins-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: randstruct: opt-out externally exposed function pointer structs task_struct: Allow randomized layout randstruct: Mark various structs for randomization
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "A number of small fixes for -rc1 Luminous changes plus a readdir race fix, marked for stable" * tag 'ceph-for-4.13-rc2' of git://github.com/ceph/ceph-client: libceph: potential NULL dereference in ceph_msg_data_create() ceph: fix race in concurrent readdir libceph: don't call encode_request_finish() on MOSDBackoff messages libceph: use alloc_pg_mapping() in __decode_pg_upmap_items() libceph: set -EINVAL in one place in crush_decode() libceph: NULL deref on osdmap_apply_incremental() error path libceph: fix old style declaration warnings
-