This patch introduces the RX/TX and a simple netdev implementation
for VF-reps. The VF-reps use the RX/TX rings of the PF. For each VF-rep
the PF driver issues a VFR_ALLOC FW cmd that returns "cfa_code"
and "cfa_action" values. The FW sets up the filter tables in such
a way that VF traffic by default (in absence of other rules)
gets punted to the parent PF. The cfa_code value in the RX-compl
informs the driver of the source VF. For traffic being transmitted
from the VF-rep, the TX BD is tagged with a cfa_action value that
informs the HW to punt it to the corresponding VF.
Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is a part of a patch-set that introduces support for
VF-reps in the bnxt_en driver. The driver registers eswitch mode
get/set methods with the devlink interface that allow a user to
enable SRIOV switchdev mode. When enabled, the driver registers
a VF-rep netdev object for each VF with the stack. This can
essentially bring the VFs unders the management perview of the
hypervisor and applications such as OVS.

The next patch in the series, adds the RX/TX routines and a slim
netdev implementation for the VF-reps.
Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In addition to the ETS weight, older firmware also requires the min_bw
parameter to be set for it to work properly.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Report DCB_CAP_DCBX_LLD_MANAGED only if the firmware DCBX agent is enabled
and running for PF or VF.  Otherwise, if both LLDP and DCBX agents are
disabled in firmware, we report DCB_CAP_DCBX_LLD_HOST and allow host
IEEE DCB settings.  This patch refines the current logic in the driver.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For debugging purpose, it is sometimes useful to disable periodic
port statistics updates, so that the firmware logs will not be
filled with statistics update messages.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of duplicating the logic multiple times.  Also, it is unnecessary
to zero the buffer in .get_ethtool_stats() because it is already zeroed
by the caller.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To allow users to set the hardware bridging mode to VEB or VEPA.  Only
single function PF can change the bridging mode.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Retrieve and store the hardware bridge mode, so that we can implement
ndo_bridge_{get|set)link methods in the next patch.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

VF representors and PTP are added features in the new firmware spec.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The last (4th) argument of tcp_rcv_established() is redundant as it
always equals to skb->len and the skb itself is always passed as 2th
agrument. There is no reason to have it.
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function mlx4_en_get_profile always return zero. So it is not
necessary to check its return value.

CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When IPv6 isn't enabled the following error is generated:

ERROR: "nd_tbl" [drivers/net/ethernet/mellanox/mlxsw/mlxsw_spectrum.ko]
undefined!

Fix it by replacing 'arp_tbl' and 'nd_tbl' with 'tbl->family' wherever
possible and reference 'nd_tbl' only when IPV6 is enabled.

Fixes: d5eb89cf ("mlxsw: spectrum_router: Reflect IPv6 neighbours to the device")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function mlx4_en_arm_cq always returns zero. So change the
return type of the function mlx4_en_arm_cq to void.

CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_phy_register_fixed_link() declares the 'err' variable to hold the result
of of_property_read_string() but only uses it once after that, while that
function can be called directly from the *if* statement...

Remove that variable and move/regroup 'link_gpio' and 'len' variables in
order to sort the declarations in the reverse Xmas tree order -- to please
DaveM. ;-)
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A null check is needed after all.  netlink skbs can have skb->head be
backed by vmalloc.  The netlink destructor vfree()s head, then sets it to
NULL.  We then panic in skb_release_data with a NULL dereference.

Re-add such a test.

Alternative would be to switch to kvfree to free skb->head memory
and remove the special handling in netlink destructor.
Reported-by: kernel test robot <fengguang.wu@intel.com>
Fixes: 06dc75ab ("net: Revert "net: add function to allocate sk_buff head without data area")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

To fix

In file included from drivers/net/ethernet/cavium/liquidio/octeon_mem_ops.c:24:0:
drivers/net/ethernet/cavium/liquidio/octeon_device.h:216:2: error: expected specifier-qualifier-list before ‘irqreturn_t’
  irqreturn_t (*process_interrupt_regs)(void *);
  ^

as seen on arm64 allmodconfig builds.

Cc: Derek Chickles <derek.chickles@caviumnetworks.com>
Cc: Satanand Burla <satananda.burla@caviumnetworks.com>
Cc: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Cc: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We forgot to set the error code on two error paths which means that we
return ERR_PTR(0) which is NULL.  The caller, find_and_alloc_map(), is
not expecting that and will have a NULL dereference.

Fixes: 546ac1ff ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/hyperv/netvsc_drv.c:737:8-14: WARNING: PTR_ERR_OR_ZERO can be used

 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Fixes: 9749fed5 ("netvsc: use ERR_PTR to avoid dereference issues")
CC: stephen hemminger <stephen@networkplumber.org>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'rxrpc-rewrite-20170721' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

David Howells says:

====================
rxrpc: Rearrange headers

Here's a pair of patches that rearrange some of the AF_RXRPC header files
that are outside of the net/rxrpc/ directory:

 (1) The bits userspace need are moved to uapi/linux/rxrpc.h.  [Should this
     be af_rxrpc.h instead, I wonder - but there doesn't seem to be
     precedent for that in the other net UAPI headers.]

 (2) For the most part, the contents of rxrpc/packet.h are no longer used
     outside of the AF_RXRPC module, so move them to net/rxrpc/protocol.h
     with the exception of the standard abort codes which are exposed to
     userspace when an abort occurs and the security index values which are
     needed when constructing keys.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Current firmware supported by the driver doesn't support batch deletion
of IPv6 neighbours on a given router interface (RIF).

Until a new version that supports this functionality is made available,
delete neighbours one by one.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: remove typedefs from structures part 3

As we know, typedef is suggested not to use in kernel, even checkpatch.pl
also gives warnings about it. Now sctp is using it for many structures.

All this kind of typedef's using should be removed. This patchset is the
part 3 to remove it for another 11 basic structures from linux/sctp.h.

Just as the part 1 and 2, No any code's logic would be changed in these
patches, only cleaning up.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_abort_chunk_t, and
replace with struct sctp_abort_chunk in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_heartbeat_chunk_t, and
replace with struct sctp_heartbeat_chunk in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_heartbeathdr_t, and
replace with struct sctp_heartbeathdr in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_sack_chunk_t, and
replace with struct sctp_sack_chunk in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_sackhdr_t, and replace
with struct sctp_sackhdr in the places where it's using this
typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_sack_variable_t, and
replace with union sctp_sack_variable in the places where it's
using this typedef.

It is also to fix some indents in sctp_acked().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_dup_tsn_t, and replace
with __be32 in the places where it's using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_gap_ack_block_t, and
replace with struct sctp_gap_ack_block in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_unrecognized_param_t, and
replace with struct sctp_unrecognized_param in the places where it's
using this typedef.

It is also to fix some indents in sctp_sf_do_unexpected_init() and
sctp_sf_do_5_1B_init().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_cookie_param_t, and
replace with struct sctp_cookie_param in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_initack_chunk_t, and
replace with struct sctp_initack_chunk in the places where it's
using this typedef.

It is also to use sizeof(variable) instead of sizeof(type).
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sabrina Dubroca says:

====================
Allow to switch off UDP-based tunnel offloads per netdevice

This patchset adds a new netdevice feature to toggle RX offloads of
UDP-based tunnel via ethtool. This is useful if the offload is causing
issues, for example if the hardware is buggy.

The feature is added to all devices providing the ->ndo_udp_tunnel_add
op, and enabled by default to preserve current behavior.

When the administrator disables this feature on a device, all
currently offloaded ports are cleared from the device.  When the
feature is turned on, the stack notifies the device about all current
ports.

v2:
 - rename feature bit to NETIF_F_RX_UDP_TUNNEL_PORT
 - rename ethtool feature to rx-udp_tunnel-port-offload
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This improves consistency of handling when moving a netdev to another
netns. Most drivers currently do a full reset when the device goes up,
so that will flush the offload state anyway.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

NETIF_F_RX_UDP_TUNNEL_PORT is special, in that we need to do more than
just flip the bit in dev->features. When disabling we must also clear
currently offloaded ports from the device, and when enabling we must
tell the device to offload the ports it can.

Because vxlan stores its sockets in a hashtable and they are inserted at
the head of per-bucket lists, switching the feature off and then on can
result in a different set of ports being offloaded (depending on the
HW's limits).
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds a new NETDEV_UDP_TUNNEL_DROP_INFO event, similar to
NETDEV_UDP_TUNNEL_PUSH_INFO, to signal to un-offload ports.

This also adds udp_tunnel_drop_rx_port(), which calls
ndo_udp_tunnel_del.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

If NETIF_F_RX_UDP_TUNNEL_PORT was disabled on a given netdevice, skip
the tunnel offload ndo call during tunnel port creation and deletion.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds a new netdevice feature, so that the offloading of RX port for
UDP tunnels can be disabled by the administrator on some netdevices,
using the "rx-udp_tunnel-port-offload" feature in ethtool.

This feature is set for all devices that provide ndo_udp_tunnel_add.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds changelink rtnl operation support for geneve devices
and the code changes involve:

  - added geneve_quiesce() which quiesces the geneve device data path
    for both TX and RX. This lets us perform the changelink operation
    atomically w.r.t data path. Also added geneve_unquiesce() to
    reverse the operation of geneve_quiesce().

  - refactor geneve_newlink into geneve_nl2info to be used by both
    geneve_newlink and geneve_changelink

  - geneve_nl2info takes a changelink boolean argument to isolate
    changelink checks.

  - Allow changing only a few attributes (ttl, tos, and remote tunnel
    endpoint IP address (within the same address family)):
    - return -EOPNOTSUPP for attributes that cannot be changed for
      now. Incremental patches can make the non-supported one
      available in the future if needed.
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>