- 21 May, 2020 33 commits
-
-
Arnd Bergmann authored
Merge tag 'v5.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New soc variant the rk3326 which is essentially a px30 with only one display controller and a new board using it, the Odroid Advance Go. sdcard regulator for the rockpro64 and a lot of devicetree fixes making the dt-binding check a lot happier. * tag 'v5.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (22 commits) arm64: dts: rockchip: fix pinctrl-names for gpio-leds node on rk3326-odroid-go2 arm64: dts: rockchip: fix pd_tcpc0 and pd_tcpc1 node position on rk3399 arm64: dts: rockchip: add bus-width properties to mmc nodes for px30 arm64: dts: rockchip: remove disable-wp from rk3308-roc-cc emmc node arm64: dts: rockchip: rename and label gpio-led subnodes arm64: dts: rockchip: fix defines in pd_vio node for rk3399 arm64: dts: rockchip: fix &pinctrl phy sub nodename for rk3399-orangepi arm64: dts: rockchip: fix rtl8211e nodename for rk3399-orangepi arm64: dts: rockchip: fix &pinctrl phy sub nodename for rk3399-nanopi4 arm64: dts: rockchip: fix rtl8211e nodename for rk3399-nanopi4 arm64: dts: rockchip: fix rtl8211f nodename for rk3328 Beelink A1 arm64: dts: rockchip: fix phy nodename for rk3328 include: dt-bindings: rockchip: remove unused defines arm64: dts: rockchip: replace RK_FUNC defines in rk3326-odroid-go2 arm64: dts: rockchip: Define the rockchip Video Decoder node on rk3399 arm64: dts: rockchip: remove #sound-dai-cells from &spdif node of rk3399-hugsun-x99.dts arm64: dts: rockchip: remove #sound-dai-cells from &i2s1 node of rk3399-pinebook-pro.dts arm64: dts: rockchip: add Odroid Advance Go dt-bindings: Add binding for Hardkernel Odroid Go Advance arm64: dts: rockchip: add core devicetree for rk3326 ... Link: https://lore.kernel.org/r/1970481.V9vR1fIhX2@philSigned-off-by:
Arnd Bergmann <arnd@arndb.de>
-
git://git.infradead.org/linux-mvebuArnd Bergmann authored
mvebu dt64 for 5.8 (part 1) Armada 3720 based SoC: + Fix PCIe support allowing to use Compex wifi cards + Turris MOX board: - fix SFP binding - forbid SDR104 on SDIO to pass electromagnetic interference certifications + uDPU board: add i2c recovery support Armada 8040 based SoC: SolidRun 8040: update phy interface * tag 'mvebu-dt64-5.8-1' of git://git.infradead.org/linux-mvebu: arm64: dts: armada-3720-turris-mox: fix SFP binding arm64: dts: armada-3720-turris-mox: forbid SDR104 on SDIO for FCC purposes arm64: dts: add uDPU i2c bus recovery arm64: dts: marvell: drop i2c timeout-ms property arm64: dts: marvell: armada-37xx: Move PCIe max-link-speed property arm64: dts: marvell: armada-37xx: Move PCIe comphy handle property arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function arm64: dts: update SolidRun Armada 8040 phy interface types Link: https://lore.kernel.org/r/878shmeffd.fsf@FE-laptopSigned-off-by:
-
git://git.infradead.org/linux-mvebuArnd Bergmann authored
mvebu dt for 5.8 (part 1) Add LCP panel support on ReadyNAS NV+v2 Add new board: Check Point L-50, kirkwood based SoC router Remove unused property 'timeout-ms' in i2c nodes * tag 'mvebu-dt-5.8-1' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: ReadyNAS NV+v2: Add LCD panel ARM: dts: kirkwood: Add Check Point L-50 board ARM: dts: marvell: drop i2c timeout-ms property Link: https://lore.kernel.org/r/87blmiefgw.fsf@FE-laptopSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'juno-updates-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt ARMv8 Juno/Vexpress/Fast Models updates for v5.8 Various miscellaneous device tree source fixes to make them fully binding compliant. It includes fixing various device node names, order of interrupt properties, compatible names, address and size cell fields and their aligment with children nodes as well as moving some fixed devices out of bus node. * tag 'juno-updates-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: juno: Fix SCPI shared mem node name arm64: dts: vexpress: Fix VExpress LED names arm64: dts: juno: Fix GPU interrupt order arm64: dts: fvp/juno: Fix bus node names arm64: dts: fvp: Fix SMMU DT node arm64: dts: fvp/juno: Fix serial node names arm64: dts: juno: Use proper DT node name for USB arm64: dts: fvp: Fix ITS node names and #msi-cells arm64: dts: fvp: Fix GIC child nodes arm64: dts: juno: Fix GIC child nodes arm64: dts: fvp: Fix GIC compatible names arm64: dts: juno: Fix mem-timer arm64: dts: juno: Move fixed devices out of bus node arm64: dts: fvp: Move fixed clocks out of bus node arm64: dts: vexpress: Move fixed devices out of bus node arm64: dts: fvp: Move fixed devices out of bus node arm64: dts: fvp/juno: Fix node address fields Link: https://lore.kernel.org/r/20200519094702.GA32975@bogusSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'qcom-dts-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM dts updates for v5.8 This adds SCM firmware node for IPQ806x and fixes the high resolution timer for IPQ4019. Samsung Galaxy S5 gains regulators, eMMC and USB support. * tag 'qcom-dts-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: msm8974-klte: Add max77826 pmic node ARM: dts: qcom: msm8974-klte: Add USB node ARM: dts: qcom: msm8974-klte: Add sdhci1 node ARM: dts: qcom: msm8974-klte: Add gpio-keys nodes ARM: dts: qcom: msm8974-klte: Remove inherited vreg_boost node ARM: dts: qcom: msm8974-klte: Add pma8084 regulator nodes ARM: dts: qcom: ipq4019: fix high resolution timer ARM: dts: qcom: add scm definition to ipq806x Link: https://lore.kernel.org/r/20200519052538.1250076-1-bjorn.andersson@linaro.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for v5.8 For SDM845 this defines the IPA network accelerator and the CCI camera control bus, it defines the required UFS reset and adds WiFi for the Lenovo Yoga C630 and defines GPIO pin names and adds OV8856 and OC7251 camera nodes for DB845c. For SC7180 it adds GPU support, defines the modem remoteproc, adds the IPA network accelerator, Coresight and ETM support, adds cpuidle low power states and updates the CPUs' compatible. For SM8250 it adds regulators from the PM8150, PM8150L and PM8009 and adds voltage corners, it defines the nodes for UFS PHY and controller and finally corrects a typo in the PDC node to make SPMI functional. For MSM8916 I2C1 and I2C5 are defined, a node for the CCI camera control interface bus is added and Coresight is disabled by default to match some product configurations. The Samsung A3U gained display support and Samsung A5U gained touchscreen support. MSM8996 now property describes the power supply chain for the GPU, the CCI camera control interface bus is added and the DB820c has the regulators of the secondary PMIC defined. For QCS404 USB PHYs and controllers are defined and wired up for the EVB. SDM630/SDM660 platform support is added and the Xiaomi Redmi Note 7 defined. It also contains a number of changes throughout to improve DT binding compliance. * tag 'qcom-arm64-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (68 commits) arm64: dts: qcom: sc7180: Correct the pdc interrupt ranges arm64: dts: qcom: sc7180: add IPA information arm64: dts: qcom: sc7180: Fix ETMv4 power management patch arm64: dts: qcom: sc7180: Add A618 gpu dt blob dt-bindings: arm-smmu: Add sc7180 compatible string arm64: dts: qcom: msm8996: Make GPU node control GPU_GX GDSC arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc arm64: dts: qcom: apq8016-sbc: merge -pins.dtsi into main .dtsi arm64: dts: qcom: msm8916: move gpu opp table to gpu node arm64: dts: qcom: msm8916: avoid using _ in node names arm64: dts: qcom: c630: Specify UFS device reset arm64: dts: qcom: c630: Add WiFi node arm64: dts: qcom: msm8916-samsung-a3u: add nodes for display panel arm64: dts: qcom: db820c: Fix invalid pm8994 supplies arm64: dts: qcom: db820c: Add pmi8994 RPM regulators arm64: dts: qcom: msm8916: Disable coresight by default arm64: dts: qcom: sc7180: Add "no-map" to cmd_db reserved area arm64: dts: qcom: msm8916-samsung-a5u: Add touchscreen arm64: dts: qcom: msm8916-samsung-a2015: Add touchscreen regulator arm64: dts: qcom: msm8916: Add blsp_i2c5 ... Link: https://lore.kernel.org/r/20200519052528.1249950-1-bjorn.andersson@linaro.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linuxArnd Bergmann authored
AT91 DT for 5.8 - New board: Microchip SAMA5D2 Industrial Connectivity Platform - All SoCs are now converted to the new PMC device tree binding - sama5d2 flexcom nodes are now fully described in sama5d2.dtsi * tag 'at91-5.8-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: (35 commits) ARM: dts: at91: sama5d2_xplained: Add aliases for the dedicated I2C IPs ARM: dts: at91: Configure I2C SCL gpio as open drain ARM: dts: at91: sama5d2_xplained: Describe the flx0 I2C function ARM: dts: at91: sama5d2_ptc_ek: Add comments to describe the aliases ARM: dts: at91: sama5d2_xplained: Add alias for DBGU ARM: dts: at91: sama5d2: Add missing flexcom definitions ARM: dts: at91: sama5d2: Remove i2s and tcb aliases from SoC dtsi ARM: dts: at91: sama5d2: Add DMA bindings for the SPI and I2C flx0 functions ARM: dts: at91: sama5d2: Add DMA bindings for the flx1 I2C function ARM: dts: at91: sama5d2: Add DMA bindings for the flx3 SPI function ARM: dts: at91: sama5d2: Add DMA bindings for the SPI and UART flx4 functions ARM: dts: at91: sama5d2: Specify the FIFO size for the Flexcom UART ARM: dts: at91: sama5d2: Move flx0 definitions in the SoC dtsi ARM: dts: at91: sama5d2: Move flx1 definitions in the SoC dtsi ARM: dts: at91: sama5d2: Move flx2 definitions in the SoC dtsi ARM: dts: at91: sama5d2: Move flx3 definitions in the SoC dtsi ARM: dts: at91: sama5d2: Move flx4 definitions in the SoC dtsi ARM: dts: at91: sama5d2: Fix the label numbering for flexcom functions ARM: dts: at91: sama5d27_wlsom1: Add alias for i2c0 ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP ... Link: https://lore.kernel.org/r/20200518212844.GA26356@piout.netSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'uniphier-dt64-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM64 SoC DT updates for v5.8 - add DMA controller nodes - add Akebi96 board support * tag 'uniphier-dt64-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: Add support for Akebi96 dt-bindings: arm: Add Akebi96 board support arm64: dts: uniphier: add #address-cells and #size-cells to SPI nodes arm64: dts: uniphier: Stabilize Ethernet RGMII mode of PXs3 ref board arm64: dts: uniphier: Add ethernet aliases arm64: dts: uniphier: Add XDMAC node Link: https://lore.kernel.org/r/CAK7LNARUL52pBhg8AD9XeScVqhD8qr2eVEfu4+1v8D+KPyOwNw@mail.gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'uniphier-dt-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt UniPhier ARM SoC DT updates for v5.8 - add DMA controller nodes * tag 'uniphier-dt-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: ARM: dts: uniphier: add #address-cells and #size-cells to SPI nodes ARM: dts: uniphier: Add ethernet aliases ARM: dts: uniphier: Add XDMAC node Link: https://lore.kernel.org/r/CAK7LNAQXSpg4s0e0d-tp9j85Sj01t13zAa5+rqsOWu4ZvkpYhg@mail.gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.7-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt MT2712: - replace deprecated compatible for the usb PHY MT6797: - switch to SPDX identifier - add and enable I2C device for x20 development board - add I2C compatible to the binding description MT7622: - add Wi-Fi device and enable it for the Bananpi-R64 MT8173: - add CPU capacities based on Dhryston benchmark - fix DT build warnings - set throtteling range to limitless - add Elm and Hana devices on which several chromebooks are based - add Global Command Queue entries to the users MT8183: - split cpuidle states in two as the clusters have different target residencies * tag 'v5.7-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt8173: Add capacity-dmips-mhz attributes arm64: dts: mt2712: use non-empty ranges for usb-phy arm64: dts: mt8173: fix mdp aliases property name arm64: dts: mediatek: Switch to SPDX license identifier for MT6797 SoC arm64: dts: mediatek: Enable I2C support for 96Boards X20 Development board arm64: dts: mediatek: Add I2C support for MT6797 SoC dt-bindings: i2c: Document I2C controller binding for MT6797 SoC arm64: dts: mt8173: fix cooling device range arm64: dts: mediatek: add mt8173 elm and hana board arm64: dts: mt8173: fix unit name warnings arm64: dts: mt8173: add uart aliases dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana arm64: dts: mt8183: adjust cpuidle target residency arm64: dts: mt8173: Add gce setting in mmsys and display node arm64: dts: mt7622: add built-in Wi-Fi device nodes Link: https://lore.kernel.org/r/2794a8db-c14f-ac34-9e28-9f3700db6c4c@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'ux500-dts-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS updates for the v5.8 kernel series: - Add proximity sensor and magnetometer to the Samsung Golden devicetree. - Add magnetometer and touchscreen to the Samsung Skomer devicetree. * tag 'ux500-dts-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: ux500: Add touchscreen to the Skomer ARM: dts: ux500: samsung-skomer: Add magnetometer ARM: dts: ux500: samsung-golden: Add magnetometer ARM: dts: ux500: samsung-golden: Add proximity sensor Link: https://lore.kernel.org/r/CACRpkdbukO33SxAZ_yn-1N8=hq3hF5OBOtP_V0fbjRT-fAa87A@mail.gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.7-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt MT2701: - add MUSB device to the SoC and the EVB MT7623: - add Mali-450 device node and bindings - add phy to gmac2 * tag 'v5.7-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt2701: Add usb2 device nodes dt-bindings: gpu: mali-utgard: add mediatek, mt7623-mali compatible arm: dts: mt7623: add Mali-450 device node arm: dts: mt7623: add phy-mode property for gmac2 Link: https://lore.kernel.org/r/ec17cf62-5463-9537-6618-2db9b2b5036e@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'socfpga_dts_update_for_v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.8 - Leave the FPGA bridges disabled in base dtsi - Add fpga2hps and fpga2sdram bridges on base Cyclone5/Arria5 dtsi * tag 'socfpga_dts_update_for_v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: Add fpga2hps and fpga2sdram bridges ARM: dts: socfgpa: set bridges status to disabled Link: https://lore.kernel.org/r/20200515193029.11318-2-dinguyen@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'sunxi-dt-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual number of patches to improve the Allwinner Device Tree support, including: - Support for the IOMMU on the H6 - Support for cpufreq / thermal throttling on the H6 - Support for the mailbox on the A64, A83t, H3, H5 and H6 - New boards: A20-OLinuXino-LIME-eMMC * tag 'sunxi-dt-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (23 commits) arm64: dts: allwinner: h6: Add IOMMU arm64: dts: allwinner: h6: Enable CPU opp tables for Tanix TX6 arm64: dts: allwinner: h6: add voltage range to OPP table arm64: dts: allwinner: sun50i-a64: Add missing address/size-cells arm64: dts: allwinner: h6: Enable CPU opp tables for Pine H64 arm64: dts: allwinner: Sort Pine H64 device-tree nodes arm64: dts: allwinner: h6: Enable CPU opp tables for Orange Pi 3 arm64: dts: allwinner: h6: Enable CPU opp tables for Beelink GS1 arm64: dts: allwinner: h6: Add CPU Operating Performance Points table arm64: dts: allwinner: h6: Add thermal trip points/cooling map arm64: dts: allwinner: h6: Add clock to CPU cores arm64: allwinner: h6: orangepi-lite2: Support BT+WIFI combo module arm64: dts: allwinner: h6: orangepi: Disable OTG mode arm64: dts: allwinner: h6: orangepi: Add gpio power supply ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity arm64: dts: allwinner: h6: Add msgbox node arm64: dts: allwinner: a64: Add msgbox node ARM: dts: sunxi: h3/h5: Add msgbox node ARM: dts: sunxi: a83t: Add msgbox node ARM: dts: sun8i-h3: add opp table for mali gpu ... Link: https://lore.kernel.org/r/cfa66bd9-f74c-4614-9ea5-9ef8546cc571.lettre@localhostSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-5.8-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.8-rc1 This contains a bit of cleanup and CPU frequency scaling support for the Tegra30 Beaver board. * tag 'tegra-for-5.8-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: dts: tegra30: beaver: Add CPU Operating Performance Points ARM: dts: tegra30: beaver: Set up voltage regulators for DVFS ARM: tegra: Kill off "simple-panel" compatibles Link: https://lore.kernel.org/r/20200515145311.1580134-11-thierry.reding@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'tegra-for-5.8-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt dt-bindings: Changes for v5.8-rc1 This adds bindings for the CSI TPG clock on Tegra210, moves various clocks from the clock and reset controller to the PMC where their controls really are, adds bindings for the external memory controller and video capture controller on Tegra210, as well as CPU frequency scaling on Tegra20 and Tegra30. * tag 'tegra-for-5.8-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: i2c: tegra: Document Tegra210 VI I2C dt-bindings: tegra: Add VI and CSI bindings dt-bindings: cpufreq: Add binding for NVIDIA Tegra20/30 dt-bindings: memory: tegra: Add external memory controller binding for Tegra210 dt-bindings: clock: tegra: Remove PMC clock IDs dt-bindings: clock: tegra: Add clock ID for CSI TPG clock Link: https://lore.kernel.org/r/20200515145311.1580134-4-thierry.reding@gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'ti-k3-dt-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt Texas Instruments K3 SoC DT updates for v5.8 - Add DSS support for both AM65x and J721e - Add watchdog support for J721e - Add EHRPWM support for AM65x - Add Thermal support for AM65x * tag 'ti-k3-dt-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-j721e-main: Add main domain watchdog entries arm64: dts: ti: k3-am65-main: Add ehrpwm nodes arm64: dts: ti: am654: Add thermal zones arm64: dts: ti: am65-wakeup: Add VTM node arm64: dts: ti: k3-j721e-common-proc-board: add assigned clks for DSS arm64: dts: ti: k3-j721e-main: Add DSS node arm64: dts: ti: am654: Add DSS node Link: https://lore.kernel.org/r/7484d3c9-323f-36a3-f0df-1287586f356d@ti.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-dt-bindings-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas DT binding updates for v5.8 (take two) - Document support for the RZ/G1H-based iWave RainboW Qseven SOM (G21M) and board (G21D). * tag 'renesas-dt-bindings-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: arm: renesas: Document iW-RainboW-G21D-Qseven-RZG1H board dt-bindings: arm: renesas: Document iW-RainboW-G21M-Qseven-RZG1H SoM Link: https://lore.kernel.org/r/20200515100547.14671-6-geert+renesas@glider.beSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-arm-dt-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.8 (take two) - Initial support for the Renesas RZ/G1H SoC on the iWave RainboW Qseven SOM (G21M) and board (G21D), - Support for the AISTARVISION MIPI Adapter V2.1 camera board on the Silicon Linux EK874 RZ/G2E evaluation kit. * tag 'renesas-arm-dt-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION MIPI Adapter V2.1 ARM: dts: r8a7742: Add GPIO nodes ARM: dts: r8a7742: Add [H]SCIF{A|B} support ARM: dts: r8a7742: Add IRQC support ARM: dts: r8a7742-iwg21d-q7: Add iWave G21D-Q7 board based on RZ/G1H ARM: dts: r8a7742-iwg21m: Add iWave RZ/G1H Qseven SOM ARM: dts: r8a7742: Initial SoC device tree clk: renesas: Add r8a7742 CPG Core Clock Definitions dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macros Link: https://lore.kernel.org/r/20200515100547.14671-3-geert+renesas@glider.beSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'stm32-dt-for-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.8, round 1 Highlights: ---------- MCU part: -fix a typo for DAC io-channel-cells on f429 and h743 MPU part: -Generic: -Bump tp PSCI 1.0 -Fix a typo for DAC io-channel-cells -Add M4 pdds for deep sleep mode -Add I2C fatmode plus support -Add new Octavio lxa-mc1 board based on OSDMP15x SiP -Add new Stinger96 board support. It is a 96Boards IoT Extended board based on stm32mp157a SoC. Some figures: 256MB DDR, 125MB and flash, Onboard BG96 modem... -Add IoT Box board support based on stinger96 board + Wifi/BT, CCS811 VOC sensor, 2 digitals microphones ... -DH: -Adapt dhcom-som and dhcom-pdk2 dts(i) files to STM32MP15 SoC diversity -Add GPIO led and GPIO keys support on PDK2 board -AV96: -Major rework to support official avenger96 board based on DHCOR SOM. -Prototype board is no more supported * tag 'stm32-dt-for-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (58 commits) ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 board ARM: dts: stm32: Split SoC-independent parts of DHCOM SOM and PDK2 ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2 ARM: dts: stm32: Add GPIO keys for STM32MP1 DHCOM PDK2 ARM: dts: stm32: Add IoT Box board support dt-bindings: arm: stm32: Document IoT Box compatible ARM: dts: stm32: Add Stinger96 board support dt-bindings: arm: stm32: Document Stinger96 compatible ARM: dts: stm32: Add missing pinctrl entries for STM32MP15 dt-bindings: Add vendor prefix for Shiratech Solutions ARM: dts: stm32: Add bindings for SPI2 on AV96 ARM: dts: stm32: Add alternate pinmux for SPI2 pins ARM: dts: stm32: Add bindings for ADC on AV96 ARM: dts: stm32: Add alternate pinmux for ADC pins ARM: dts: stm32: Add bindings for FDCAN2 on AV96 ARM: dts: stm32: Add alternate pinmux for FDCAN2 pins ARM: dts: stm32: Add bindings for FDCAN1 on AV96 ARM: dts: stm32: Add alternate pinmux for FDCAN1 pins ARM: dts: stm32: Repair I2C2 operation on AV96 ARM: dts: stm32: Add alternate pinmux for I2C2 pins ... Link: https://lore.kernel.org/r/19160355-364d-170c-7ae2-5ba7f714103f@st.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linuxArnd Bergmann authored
Samsung DTS ARM changes for v5.8 1. Add DTS for Exynos4210-based Samsung Galaxy S2 (GT-I9100) mobile phone, 2. Enable WiFi and Bluetooth in multiple boards, 3. Add new features to S5Pv210-based Aries family of mobile phones (e.g. Samsung Galaxy S): necessary configuration for suspend, audio support, USB mux, touch keys, panel, i2c-gpio adapters, FM radio, ADC, 4. Many minor fixes (e.g. GPIO polarity, interrupts). * tag 'samsung-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (29 commits) ARM: dts: s5pv210: Set MAX8998 GPIO pulls on Aries boards ARM: dts: s5pv210: Correct FIMC definitions ARM: dts: s5pv210: Assign clocks to MMC devices on Aries boards ARM: dts: s5pv210: Enable ADC on Aries boards ARM: dts: s5pv210: Add an ADC node ARM: dts: s5pv210: Disable pull for vibrator enable GPIO on Aries boards ARM: dts: s5pv210: Add si470x FM radio to Galaxy S ARM: dts: s5pv210: Add remaining i2c-gpio adapters to Aries boards ARM: dts: s5pv210: Add panel support to Aries boards ARM: dts: s5pv210: Add touchkey support to Aries boards ARM: dts: s5pv210: Add FSA9480 support to Aries boards ARM: dts: s5pv210: Add WM8994 support to Aries boards ARM: dts: s5pv210: Disable pulls on GPIO I2C adapters for Aries ARM: dts: s5pv210: Set keep-power-in-suspend for SDHCI1 on Aries ARM: dts: s5pv210: Correct gpi pinctrl node name ARM: dts: s5pv210: Add sleep GPIO configuration for Galaxy S ARM: dts: s5pv210: Add sleep GPIO configuration for Fascinate4G ARM: dts: s5pv210: Add helper define for sleep gpio config ARM: dts: exynos: Enable WLAN support for the UniversalC210 board ARM: dts: exynos: Enable WLAN support for the Rinato board ... Link: https://lore.kernel.org/r/20200512122922.5700-2-krzk@kernel.orgSigned-off-by:
-
https://github.com/Broadcom/stblinuxArnd Bergmann authored
This pull request contains Broadcom ARM-based SoCs Device Tree changes for v5.8, please pull the following: - Nicolas updates the Raspberry Pi 4 board DTS to include the GPIO controlling power to the SD card, adds support for the vmmc regulator for the emmc2 controller and finally updates the power management provider for V3D to use the firmware to solve instabilities. * tag 'arm-soc/for-5.8/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Use firmware PM driver for V3D ARM: dts: bcm2711: Add vmmc regulator in emmc2 ARM: dts: bcm2711: Update expgpio's GPIO labels Link: https://lore.kernel.org/r/20200511210522.28243-2-f.fainelli@gmail.comSigned-off-by:
-
git://github.com/hisilicon/linux-hisiArnd Bergmann authored
ARM64: DT: Hisilicon SoCs DT updates for 5.8 - Add pinconf for spi2 and spi3 nodes and increase the drive strength to achieve the max speed for the Hikey960 board - Add CTI nodes for the Hikey620 board * tag 'hisi-arm64-dt-for-5.8' of git://github.com/hisilicon/linux-hisi: arm64: dts: hi6220: Add CTI options arm64: dts: hikey960: pinctrl: Fix spi2/spi3 pinconf Link: https://lore.kernel.org/r/5EBE430E.6090508@hisilicon.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'realtek-dt-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into arm/dt Realtek Arm based SoC DT for v5.8 Add RTD1195, RTD1395 and RTD1619 SoCs as well as Xnano X5 TV box. Clean up memory nodes and /soc ranges. Factor out r-bus and partition it into CRT, Iso, Misc, SB2 and SCPU Wrapper blocks. * tag 'realtek-dt-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek: (35 commits) dt-bindings: reset: rtd1295: Add SB2 reset arm64: dts: realtek: rtd16xx: Add SB2 and SCPU Wrapper syscon nodes arm64: dts: realtek: rtd139x: Add SB2 and SCPU Wrapper syscon nodes arm64: dts: realtek: rtd129x: Add SB2 and SCPU Wrapper syscon nodes ARM: dts: rtd1195: Add SB2 and SCPU Wrapper syscon nodes arm64: dts: realtek: rtd16xx: Add CRT syscon node ARM: dts: rtd1195: Add UART resets ARM: dts: rtd1195: Add reset nodes dt-bindings: reset: Add Realtek RTD1195 ARM: dts: rtd1195: Add CRT syscon node arm64: dts: realtek: rtd16xx: Introduce iso and misc syscon arm64: dts: realtek: rtd139x: Introduce CRT, iso and misc syscon arm64: dts: realtek: rtd129x: Introduce CRT, iso and misc syscon ARM: dts: rtd1195: Introduce iso and misc syscon arm64: dts: realtek: rtd1295: Add Xnano X5 dt-bindings: arm: realtek: Add Xnano X5 dt-bindings: vendor-prefixes: Add Xnano arm64: dts: realtek: rtd16xx: Add memory reservations arm64: dts: realtek: rtd16xx: Carve out boot ROM from memory arm64: dts: realtek: Add RTD1619 SoC and Realtek Mjolnir EVB ... Link: https://lore.kernel.org/r/20200510232158.18477-2-afaerber@suse.deSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'aspeed-5.8-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.8 New machines: - YADRO's ast2500 OpenPower P9 Nicole BMC - Facebook's ast2500 x86 Yosemite V2 BMC The AST2600 machines Rainier and Tacoma were fleshed out. Machines have started describing the GPIO names as userspace attempts to use the GPIO chardev API. * tag 'aspeed-5.8-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: (32 commits) ARM: dts: aspeed: Change KCS nodes to v2 binding ARM: dts: Aspeed: AST2600: Add XDMA PCI-E root control reset ARM: dts: aspeed: ast2600: Add XDMA Engine ARM: dts: aspeed: ast2500: Add XDMA Engine ARM: dts: aspeed: Adding Facebook Yosemite V2 BMC ARM: dts: aspeed: Add YADRO Nicole BMC ARM: dts: aspeed: mihawk: add aliases for i2c ARM: dts: aspeed: tacoma: Add TPM ARM: dts: aspeed: tacoma: Enable the second VUART ARM: dts: aspeed: tacoma: Add iio-hwmon nodes for IIO devices ARM: dts: aspeed: rainier: Add VGA reserved memory region ARM: dts: aspeed: rainier: Add gpio line names ARM: dts: aspeed: tacoma: Add gpio line names ARM: dts: aspeed: zaius: Add gpio line names ARM: dts: aspeed: romulus: Add gpio line names ARM: dts: aspeed: witherspoon: Add gpio line names ARM: dts: aspeed: ast2600: Set arch timer always-on ARM: dts: aspeed: tacoma: Add GPIOs for FSI ARM: dts: aspeed: mihawk: Change the name of leds ARM: dts: aspeed: rainier: Remove regulators ... Link: https://lore.kernel.org/r/CACPK8Xd-=XFREvvS-mK_ECyn14y0GPAMyy5BpEEUYfaw4jAgsw@mail.gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt DTS changes for omaps for v5.8 merge window We add support for beaglebone-ai board that's am5729 based devices. Then we have a series changes to configure more hardware acceletators found on omap variants. With the recent ti-sysc related changes, we can now better configure the accelerators with help of the clock framework and reset driver. So with a series of changes from Suman Anna and Tero Kristo, let's configure IPUs and DSPs for dra7 devices like beagle-x15. And let's also configure the missing crypto accelerators for omap5 as those have been missing. Note that there are still some pending driver related patches to use IPU and DSP related features with mainline kernel, but those are independent of the devicetree changes. Then there is a display related change for am57xx-idk for tc358778 bridge, and a change to configure the missing clock source for some PWM timers. * tag 'omap-for-v5.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits) ARM: OMAP5: Make L4SEC clock domain SWSUP only ARM: OMAP4: Make L4SEC clock domain SWSUP only ARM: dts: omap5: add DES crypto accelerator node ARM: dts: omap5: add SHA crypto accelerator node ARM: dts: omap5: add aes2 entry ARM: dts: omap5: add aes1 entry ARM: dts: dra7-ipu-dsp-common: Add watchdog timers to IPU and DSP nodes ARM: dts: am571x-idk: Add CMA pools and enable IPUs & DSP1 rprocs ARM: dts: am572x-idk-common: Add CMA pools and enable IPU & DSP rprocs ARM: dts: beagle-x15-common: Add CMA pools and enable IPU & DSP rprocs ARM: dts: dra76-evm: Add CMA pools and enable IPU & DSP rprocs ARM: dts: dra71-evm: Add CMA pools and enable IPUs & DSP1 rprocs ARM: dts: dra72-evm-revc: Add CMA pools and enable IPUs & DSP1 rprocs ARM: dts: dra72-evm: Add CMA pools and enable IPUs & DSP1 rprocs ARM: dts: dra7-evm: Add CMA pools and enable IPU & DSP rprocs ARM: dts: dra7-ipu-dsp-common: Add timers to IPU and DSP nodes ARM: dts: dra7-ipu-dsp-common: Add mailboxes to IPU and DSP nodes ARM: dts: dra7-ipu-dsp-common: Move mailboxes into common files ARM: dts: DRA72x: Add aliases for rproc nodes ARM: dts: DRA74x: Add aliases for rproc nodes ... Link: https://lore.kernel.org/r/pull-1588873628-477615@atomide.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-dt-bindings-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas DT binding updates for v5.8 - Document System Controller (SYSC) and Reset (RST) support for RZ/G1H. * tag 'renesas-dt-bindings-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: reset: rcar-rst: Document r8a7742 reset module dt-bindings: power: rcar-sysc: Document r8a7742 SYSC binding Link: https://lore.kernel.org/r/20200430084849.1457-6-geert+renesas@glider.beSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'renesas-arm-dt-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.8 - USB, UART, PWM, and PCIe support for R-Car M3-W+, - PWM (16-bit Timer Pulse Unit and PWM Timers) support for R-Car M2-W, - Minor fixes and cleanups. * tag 'renesas-arm-dt-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: Fix IOMMU device node names ARM: dts: renesas: Fix IOMMU device node names ARM: dts: shmobile: Update CMT1 compatible values ARM: dts: r8a7791: Add PWM device nodes ARM: dts: r8a7791: Add TPU device node arm64: dts: renesas: r8a77961: Add PCIe device nodes arm64: dts: renesas: r8a77961: Add PWM device nodes arm64: dts: renesas: r8a77961: Add SCIF and HSCIF nodes arm64: dts: renesas: r8a77961: Add USB3.0 device nodes arm64: dts: renesas: r8a77961: Add USB2.0 device nodes Link: https://lore.kernel.org/r/20200430084849.1457-3-geert+renesas@glider.beSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'versatile-dts-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt Versatile DTS updates for the v5.8 kernel: Create a new device tree for the Integrator/AP with the IM-PD1 expansion module fitted in the first slot. If we want to augment the slot where it is sitting, we can alter the device tree or make the bootloader do so. * tag 'versatile-dts-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: Add devicetree for Integrator/AP with IM-PD1 Link: https://lore.kernel.org/r/CACRpkdZ-28o+pPdP7i_fc+7g4ndPWf+SWTsjnhFEegTggiXVSg@mail.gmail.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'sti-dt-for-v5.8-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into arm/dt STi DT fixes: - Remove duplicated rng node in stih407-family.dtsi - Fix complain about IRQ_TYPE_NONE usage in stih418.dtsi * tag 'sti-dt-for-v5.8-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: dts: arm: stih407-family: remove duplicated rng nodes dts: arm: stih418: Fix complain about IRQ_TYPE_NONE usage Link: https://lore.kernel.org/r/4b0c02e7-a247-50c0-d729-88d16b9dd7fd@st.comSigned-off-by:
-
Chunyan Zhang authored
Add emmc and sd card devicetree nodes for SC9863A. Link: https://lore.kernel.org/r/20200414101636.24503-3-zhang.lyra@gmail.comSigned-off-by:
Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by:
-
Chunyan Zhang authored
add clock devicetree nodes for SC9863A. Link: https://lore.kernel.org/r/20200414101636.24503-2-zhang.lyra@gmail.comSigned-off-by:
-
Johan Jonker authored
The 'pinctrl-names' property should contain a list of names to the assigned states. The value 'led_pins' in the gpio-leds node on rk3326-odroid-go2 is not a state that is normally used, so change it the common name 'default'. Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200519111444.2208-1-jbx6244@gmail.comSigned-off-by:
Heiko Stuebner <heiko@sntech.de>
-
- 19 May, 2020 2 commits
-
-
Johan Jonker authored
The pd_tcpc0 and pd_tcpc1 nodes are currently a sub node of pd_vio. In the rk3399 TRM figure of the 'Power Domain Partition' and in the table of 'Power Domain and Voltage Domain Summary' these power domains are positioned directly under VD_LOGIC, so fix that in 'rk3399.dtsi'. Signed-off-by:
Caesar Wang <wxt@rock-chips.com> Link: https://lore.kernel.org/r/20200428203003.3318-2-jbx6244@gmail.comSigned-off-by:
-
Maulik Shah authored
Few PDC interrupts do not map to respective parent GIC interrupt. Fix this by correcting the pdc interrupt map. Fixes: 22f185ee ("arm64: dts: qcom: sc7180: Add pdc interrupt controller") Cc: devicetree@vger.kernel.org Signed-off-by:
Maulik Shah <mkshah@codeaurora.org> Link: https://lore.kernel.org/r/1589804402-27130-1-git-send-email-mkshah@codeaurora.orgSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org>
-
- 18 May, 2020 5 commits
-
-
Alex Elder authored
Add IPA-related nodes and definitions to "sc7180.dtsi". Signed-off-by:
Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20200518214939.9730-1-elder@linaro.orgSigned-off-by:
-
Johan Jonker authored
'bus-width' and pinctrl containing the bus-pins should be in the same file, so add them to all mmc nodes in 'px30.dtsi'. Signed-off-by:
-
Johan Jonker authored
The mmc-controller.yaml didn't explicitly say disable-wp is for SD card slot only, but that is what it was designed for in the first place. Remove all disable-wp from emmc or sdio controllers. Signed-off-by:
-
Johan Jonker authored
Current dts files with 'gpio-led' nodes were manually verified. In order to automate this process leds-gpio.txt has been converted to yaml. With this conversion a check for pattern properties was added. A test with the command below gives a screen full of warnings like: arch/arm64/boot/dts/rockchip/rk3368-r88.dt.yaml: gpio-leds: 'work' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Fix these errors with help of the following rules: 1: Add nodename in the preferred form. 2: Always add a label that ends with '_led' to prevent conflicts with other labels such as 'power' and 'mmc' 3: If leds need pinctrl add a label that ends with '_led_pin' also to prevent conflicts with other labels. patternProperties: # The first form is preferred, but fall back to just 'led' # anywhere in the node name to at least catch some child nodes. "(^led-[0-9a-f]$|led)": make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/ leds-gpio.yaml Signed-off-by:
-
Johan Jonker authored
A test with the command below gives for example this error: arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml: pd_vio@15: 'pd_tcpc0@RK3399_PD_TCPC0', 'pd_tcpc1@RK3399_PD_TCPC1' do not match any of the regexes: '.*-names$', '.*-supply$', '^#.*-cells$', '^#[a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$', '^__.*__$', 'pinctrl-[0-9]+' Fix error by replacing the wrong defines by the ones mentioned in 'rk3399-power.h'. make -k ARCH=arm64 dtbs_check Signed-off-by:
-
