This declaration is declared twice so just remove this one because
the other one is the one which contains static struct initializers.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

WPS definition was defined by default in ks_wlan.h header
file. So it makes no sense to have conditional preprocessor
stuff along the code about this.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Avoid very long if condition just changing its style. This makes
checkpatch script not complains about this line.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Avoid the use of switch-case block which is not necessary
at all and just use a ternary operator to achieve this.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Most cases which are being handled in the switch-case of
ks_wlan_set_mode function are just returning EINVAL. Avoid
the use of switch-case stament and just use a simple if
to handle those. This decrease LOC as well as improves
readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This definitions are in linux/wireless.h header so it is not
necessary at all to have this compatibility stuff duplicated here.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Singles if does not need at all to use brackets in its body
so just remove them which is the preferred style.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some minor changes have been done in this function to clean
it a bit:
    - POWER_MGMT_ACTIVE and default case are the same so
      just handle that with the same block of code,
    - POWER_MGMT_SAVE1 replaces if-else with a ternary operator.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function hostif_data_indication checks some hardcoded values in a
switch-case block. This values are defined in uapi/linux/llc.h
header. Just use them and avoid a comment in the code improving
readability a bit.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a lot of netdev_dbg calls related with the access point
in this function and all of them can be joined in only one call.
This makes code a bit simplier.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commits avoid some if-else code extracting common code before
its use and making use of a new variable 'size' which is assigned
using a ternary operator. This improves readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit reviews KSC_OPNOTSUPP related code. The
preprocessor KSC_OPNOTSUPP is defined by default so
related wext functions are not being used. Just clean
code removing all of this stuff.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit make use of IW_HANDLER to set wext operations
of the device. Using this, comments are not neccessary anymore
and also NULL entries so readability is clearly increased.
In order to avoid casting because of the use of a different
prototype in all related functions, those which are affected
have been updated also to make use of the  union iwreq_data
as third parameter updating code accordly.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit reviews includes of ks_hostif.c source file.
Those which are not being used at all have been removed.
Driver header includes have been moved after the kernel
header includes to make style consistent in different
files of the driver. The need of ks_wlan.h header include
is only because of some preprocessor conditional code
of WPS definition. This definition is in ks_wlan.h
so this one must be included before the ks_hostif.h header
file.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes data_buff array field of ks_wlan_private
which is not being used at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes l2_dev and l2_fd fields of ks_wlan_private
struct because they are not being used at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes a blank line between definition in
hostif_data_request function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit fix length of the definition line of init_request
function. Warning from checkpatch script for this is fixed.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes some comments which are not necessary at all
because code is clear enough to understand its intention.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit changes logic to handle with the status of the device
at first checking for close state to return directly instead
of just do the stuff when device is open. This improves readability
avoiding one level indentation.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit changes type for device_open_status field of ks_wlan_private
structure from int to bool. This variable is only be set to 1
on ks_wlan_net_start and set to 0 on ks_wlan_net_stop. For this
purpose it is not necessary at all to use an integer because a bool
is enough. This also renames field name from device_open_status to
is_device_open.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit assigns dev_alloc_name() call to 'ret' variable to
check it after instead of check directly the call in the if
condition. This improves a bit readability. It also add an empty
line before the new assignment to separate it from the previous
check statement block.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit replaces type unsigned char which is the one which
is being used for firmware buffers with u8 type which is preferred.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit reviews and fixes error paths in ks7010_sdio_remove
driver function. It change logic to handle error directly
after priv dereference to avoid one level indentation. It also
removes a temporal netdev variable which wasn't being used in all
of the function calls. Also if send_stop_request call fails it
was making a direct 'return' instead of doing a properly cleaning.
Because of this a new 'err_free_card' label has been added.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit checks sdio_set_block_size function return value.
If it fails abort driver initialization.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit replaces deprecated create_workqueue call with the
alloc_workqueue one which is the one to be used now for this
purpose.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit moves MODULE_DEVICE_TABLE related code to the end of
the file. This is not necessary at all but moving it just before
its use improves readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit use an and operator in a if condition to avoid one
indentation level which is not needed at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit reviews debug and error messages in code located
in ks7010_sdio source file avoiding to use 'error' or 'ks7010'
because this file is using netdev_* functions and has non
sense to repeat information in log messages.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit reviews comment style used in ks7010_sdio source file
in order to be coherent with the rest of the code. Most comments
in this source are before definitions but only two of them have
been written at the right. So, be coherent moving this two to the
top of definitions. Also fix one multiline comment style to use
the normal preferred kernel style.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit adds REG suffix to register definitions related
with SDIO in order to improve readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes two definitions inside ks7010_sdio source file
because they are not being used at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit moves SDIO related register definitions from header
to source file. There is no need to have those into the header
because they are only being used in specific SDIO code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit moves ROM_FILE from header to source file because
there is not being used outside this.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes casts in calls to michael_mic_function.
Most of them are nosense because types match perfectly function
parameters. To avoid also int casting for len parameter just
pass unsigned len to function which makes sense because is only
being called with unsigned int len parameters.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When refactoring the function msdc_init_gpd_bd, an error in the
calculation of the bd.next address was introduced. The offset has to
be added to the base address, not multiplied.

Fixes: 8f239558 ("staging: mt7621-mmc: Refactor msdc_init_gpd_bd")
Reported-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The card_workqueue field of msdc_host is already if 0'd out and there
are no references to it in the code (not even in unused code), so
remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the current code there are '#if 0' out references on using a
tasklet instead of delayed_work. Removing these improves readability.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The functions msdc_command_resp and msdc_do_request are always called
with the host->lock lock held. By adding annotations, sparse is
informed about that.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Current code discard the address space information on the base address
of the mmc controller, that causes sparse warnings. It uses the raw
read write function, that is correct for the mips architecture (little
endian), but for portability the non-raw function should be used. Also
the clear/set bit macros do direct memory access, that is also correct
for mips, but not portable.

So the type of the base address is changed to void __iomem *, that is
the type returned by the ioremap function. The set/clear bit macros
are changed to functions, that use the portable read and write
functions. The use of the raw access functions is changed to use the
non-raw ones.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>