- 31 Oct, 2013 7 commits
-
-
Guennadi Liakhovetski authored
Camera sensors usually require a master clock for data sampling. This patch registers such a clock source for em28xx cameras. This fixes the currently broken em28xx ov2640 camera support and can also be used by other camera sensors. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Guennadi Liakhovetski authored
To obtain a clock reference consumers supply their device object to the V4L2 clock framework. The latter then uses the consumer device name to find a matching clock. For that to work V4L2 clock providers have to provide the same device name, when registering clocks. This patch adds a helper macro to generate a suitable device name for I2C devices. Signed-off-by:
-
Guennadi Liakhovetski authored
Many bridges and video host controllers supply fixed rate always on clocks to their I2C devices. This patch adds two simple helpers to register and unregister such a clock. Signed-off-by:
-
Guennadi Liakhovetski authored
This prepares soc-camera to use struct v4l2_subdev_platform_data for its subdevice-facing API, which would allow subdevice driver re-use. Signed-off-by:
-
Guennadi Liakhovetski authored
This struct shall be used by subdevice drivers to pass per-subdevice data, e.g. power supplies, to generic V4L2 methods, at the same time allowing optional host-specific extensions via the host_priv pointer. To avoid having to pass two pointers to those methods, add a pointer to this new struct to struct v4l2_subdev. Signed-off-by:
-
Guennadi Liakhovetski authored
If v4l2_async_register_subdev() fails, don't skip the clean up. Signed-off-by:
-
Guennadi Liakhovetski authored
BUG*() and WARN*() macros specify their conditions as unlikely, using BUG_ON(unlikely(condition)) is redundant, remove it. Signed-off-by:
-
- 28 Oct, 2013 25 commits
-
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Prathyush K authored
If a frame is still decoding when system enters suspend mode, we wait on the device queue for a interrupt condition. This sometimes leads to a timeout because the device queue might not be woken up everytime. Usually, the context queue gets woken up when that context's frame gets decoded. This patch adds a condition to wake up the device queue along with the context queue when the system is in suspend mode. Since the device queue is now woken up, we don't have to check the context's int_cond flag while waiting. Also, we can skip calling try_run after waking up the device queue to ensure that we don't have to wait for more than one frame to be processed. Signed-off-by:
Prathyush K <prathyush.k@samsung.com> Signed-off-by:
Arun Mankuzhi <arun.m@samsung.com> Signed-off-by:
Arun Kumar K <arun.kk@samsung.com> Signed-off-by:
-
Arun Kumar K authored
The patch sets the default values of MAX_QP and GOP size encoder parameters to some firmware recommended default values. This enables the applications to get a better encoded output using the default settings itself. Signed-off-by:
Kiran AVND <avnd.kiran@samsung.com> Signed-off-by:
-
Fabio Estevam authored
Running the coda driver without CONFIG_SRAM selected leads to the following probe error: coda 63ff4000.vpu: iram pool not available coda: probe of 63ff4000.vpu failed with error -12 In order to avoid it, select CONFIG_SRAM inside VIDEO_CODA. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Philipp Zabel authored
If unused, the pixel format priv field has to be cleared by the driver in try_fmt. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
Implement try_decoder_cmd to let userspace determine available commands and flags. Signed-off-by:
-
Philipp Zabel authored
This patch fixes the v4l2-compliance "TRY_FMT(G_FMT) != G_FMT" issue. The driver now overwrites invalid formats with the current setting, using coda_get_max_dimensions to find device specific max width/height. Signed-off-by:
-
Philipp Zabel authored
Moving the ioctl handler callbacks into the coda namespace helps tremendously to make sense of backtraces. Signed-off-by:
-
Philipp Zabel authored
Instead of copying v4l2_buf.flags from the source buffer, set the destination buffer flags as reported by the hardware codec. Signed-off-by:
-
Philipp Zabel authored
Use the product name (currently CodaDx6 or CODA7541) to fill the v4l2_capabilities.name field. Signed-off-by:
-
Philipp Zabel authored
The register is only written on CodaDx6, so the temporary variable to be written only needs to be initialized on CodaDx6. Also, drop two no-op lines. Signed-off-by:
-
Philipp Zabel authored
Correctly flag compressed formats in the ENUM_FMT ioctl output. Signed-off-by:
-
Philipp Zabel authored
Allow device_run with no buffers queued after streamoff only when the current instance is a decoder. Signed-off-by:
-
Philipp Zabel authored
With the new firmware, there are not anymore four register sets, but a single register set, which the driver has to conserve across context switches. This allows to handle more than four instances at the same time. Signed-off-by:
-
Shaik Ameer Basha authored
When the current context is running, 1] If release is called, it waits until the job is finished. 2] As soon as the job is finished, v4l2_mem_ctx_release()tries to release the vb2 queues. 3] But if the current context can be scheduled in the v4l2_m2m_job_finish() it schedules the context and tries to call device_run(). 4] As the release() and device_run() sequence can't be predicted sometimes device_run() may get empty vb2 buffers. This patch adds the ABORT state to the job_flags. Once the job_abort() or release() is called on the context, the same context will not be scheduled in the v4l2_m2m_job_finish(). Signed-off-by:
Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by:
-
Shaik Ameer Basha authored
When the current context is running, 1] If release() or streamoff() is called on the current context, it waits until the job is aborted or finished. 2] If the job is finished, driver will call the v4l2_m2m_job_finish(). 3] If the job is aborted inside device_run callback, then driver has to inform the v4l2 mem2mem framework about the same by calling v4l2_m2m_job_finish() with VB2_BUF_STATE_ERROR. The current code doesn't call v4l2_m2m_job_finish() in the case, where the job is aborted from the device_run callback. This scenerio is producing a hang as the other queued contexts are not getting scheduled. By adding the ABORT state, driver can understand the current job is aborted and not finished. By checking this flag, driver can call v4l2_m2m_job_finish() with VB2_BUF_STATE_ERROR. Signed-off-by:
-
Philipp Zabel authored
v4l2_m2m_streamoff drops the list of ready buffers but failed to reset the num_rdy counter to zero. This would lead to v4l2_m2m_num_src/dst_bufs_ready reporting wrong values after streamoff. Signed-off-by:
-
Philipp Zabel authored
Just clearing the m2m_ctx->queue list_head will leave the m2m_dev->job_queue in a broken state and can cause scheduling of device_runs after streamoff was called. Signed-off-by:
-
Jingoo Han authored
Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Jingoo Han authored
Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by:
-
Jingoo Han authored
Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by:
-
Archit Taneja authored
Add support for the de-interlacer block in VPE. For de-interlacer to work, we need to enable 2 more sets of VPE input ports which fetch data from the 'last' and 'last to last' fields of the interlaced video. Apart from that, we need to enable the Motion vector output and input ports, and also allocate DMA buffers for them. We need to make sure that two most recent fields in the source queue are available and in the 'READY' state. Once a mem2mem context gets access to the VPE HW(in device_run), it extracts the addresses of the 3 buffers, and provides it to the data descriptors for the 3 sets of input ports((LUMA1, CHROMA1), (LUMA2, CHROMA2), and (LUMA3, CHROMA3)) respectively for the 3 consecutive fields. The motion vector and output port descriptors are configured and the list is submitted to VPDMA. Once the transaction is done, the v4l2 buffer corresponding to the oldest field(the 3rd one) is changed to the state 'DONE', and the buffers corresponding to 1st and 2nd fields become the 2nd and 3rd field for the next de-interlace operation. This way, for each deinterlace operation, we have the 3 most recent fields. After each transaction, we also swap the motion vector buffers, the new input motion vector buffer contains the resultant motion information of all the previous frames, and the new output motion vector buffer will be used to hold the updated motion vector to capture the motion changes in the next field. The motion vector buffers are allocated using the DMA allocation API. The de-interlacer is removed from bypass mode, it requires some extra default configurations which are now added. The chrominance upsampler coefficients are added for interlaced frames. Some VPDMA parameters like frame start event and line mode are configured for the 2 extra sets of input ports. Signed-off-by:
Archit Taneja <archit@ti.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Archit Taneja authored
VPE is a block which consists of a single memory to memory path which can perform chrominance up/down sampling, de-interlacing, scaling, and color space conversion of raster or tiled YUV420 coplanar, YUV422 coplanar or YUV422 interleaved video formats. We create a mem2mem driver based primarily on the mem2mem-testdev example. The de-interlacer, scaler and color space converter are all bypassed for now to keep the driver simple. Chroma up/down sampler blocks are implemented, so conversion beteen different YUV formats is possible. Each mem2mem context allocates a buffer for VPE MMR values which it will use when it gets access to the VPE HW via the mem2mem queue, it also allocates a VPDMA descriptor list to which configuration and data descriptors are added. Based on the information received via v4l2 ioctls for the source and destination queues, the driver configures the values for the MMRs, and stores them in the buffer. There are also some VPDMA parameters like frame start and line mode which needs to be configured, these are configured by direct register writes via the VPDMA helper functions. The driver's device_run() mem2mem op will add each descriptor based on how the source and destination queues are set up for the given ctx, once the list is prepared, it's submitted to VPDMA, these descriptors when parsed by VPDMA will upload MMR registers, start DMA of video buffers on the various input and output clients/ports. When the list is parsed completely(and the DMAs on all the output ports done), an interrupt is generated which we use to notify that the source and destination buffers are done. The rest of the driver is quite similar to other mem2mem drivers, we use the multiplane v4l2 ioctls as the HW support coplanar formats. Signed-off-by:
-
Archit Taneja authored
Create functions which the VPE driver can use to create a VPDMA descriptor and add it to a VPDMA descriptor list. These functions take a pointer to an existing list, and append the configuration/data/control descriptor header to the list. In the case of configuration descriptors, the creation of a payload block may be required(the payloads can hold VPE MMR values, or scaler coefficients). The allocation of the payload buffer and it's content is left to the VPE driver. However, the VPDMA library provides helper macros to create payload in the correct format. Add debug functions to dump the descriptors in a way such that it's easy to see the values of different fields in the descriptors. Signed-off-by:
-
Archit Taneja authored
The primary function of VPDMA is to move data between external memory and internal processing modules(in our case, VPE) that source or sink data. VPDMA is capable of buffering this data and then delivering the data as demanded to the modules as programmed. The modules that source or sink data are referred to as clients or ports. A channel is setup inside the VPDMA to connect a specific memory buffer to a specific client. The VPDMA centralizes the DMA control functions and buffering required to allow all the clients to minimize the effect of long latency times. Add the following to the VPDMA helper: - A data struct which describe VPDMA channels. For now, these channels are the ones used only by VPE, the list of channels will increase when VIP(Video Input Port) also uses the VPDMA library. This channel information will be used to populate fields required by data descriptors. - Data structs which describe the different data types supported by VPDMA. This data type information will be used to populate fields required by data descriptors and used by the VPE driver to map a V4L2 format to the corresponding VPDMA data type. - Provide VPDMA register offset definitions, functions to read, write and modify VPDMA registers. - Functions to create and submit a VPDMA list. A list is a group of descriptors that makes up a set of DMA transfers that need to be completed. Each descriptor will either perform a DMA transaction to fetch input buffers and write to output buffers(data descriptors), or configure the MMRs of sub blocks of VPE(configuration descriptors), or provide control information to VPDMA (control descriptors). - Functions to allocate, map and unmap buffers needed for the descriptor list, payloads containing MMR values and scaler coefficients. These use the DMA mapping APIs to ensure exclusive access to VPDMA. - Functions to enable VPDMA interrupts. VPDMA can trigger an interrupt on the VPE interrupt line when a descriptor list is parsed completely and the DMA transactions are completed. This requires masking the events in VPDMA registers and configuring some top level VPE interrupt registers. - Enable some VPDMA specific parameters: frame start event(when to start DMA for a client) and line mode(whether each line fetched should be mirrored or not). - Function to load firmware required by VPDMA. VPDMA requires a firmware for it's internal list manager. We add the required request_firmware apis to fetch this firmware from user space. - Function to dump VPDMA registers. - A function to initialize and create a VPDMA instance, this will be called by the VPE driver with it's platform device pointer, this function will take care of loading VPDMA firmware and returning a vpdma_data instance back to the VPE driver. The VIP driver will also call the same init function to initialize it's own VPDMA instance. Signed-off-by:
-
- 17 Oct, 2013 8 commits
-
-
Wei Yongjun authored
irq allocated with devm_request_irq should not be freed using free_irq, because doing so causes a dangling pointer, and a subsequent double free. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Chen Gang authored
[media] drivers: media: usb: b2c2: use usb_*_coherent() instead of pci_*_consistent() in flexcop-usb.c Some architectures do not support PCI, but still support USB, so need let our usb driver try to use usb_* instead of pci_* to support these architectures, or can not pass compiling. The related error (with allmodconfig for arc): CC [M] drivers/media/usb/b2c2/flexcop-usb.o drivers/media/usb/b2c2/flexcop-usb.c: In function ‘flexcop_usb_transfer_exit’: drivers/media/usb/b2c2/flexcop-usb.c:393: error: implicit declaration of function ‘pci_free_consistent’ drivers/media/usb/b2c2/flexcop-usb.c: In function ‘flexcop_usb_transfer_init’: drivers/media/usb/b2c2/flexcop-usb.c:410: error: implicit declaration of function ‘pci_alloc_consistent’ Signed-off-by:Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Peter Senna Tschudin authored
The variable frame_ready is only assigned the values true and false. Change its type to bool. The simplified semantic patch that find this problem is as follows (http://coccinelle.lip6.fr/): @exists@ type T; identifier b; @@ - T + bool b = ...; ... when any b = \(true\|false\) Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Philipp Zabel authored
__setup_offsets fills the v4l2_planes' mem_offset fields, which is only valid for V4L2_MEMORY_MMAP type buffers. For V4L2_MEMORY_DMABUF and _USERPTR buffers, this incorrectly overwrites the fd and userptr fields. Reported-by:
Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Pawel Osciak <pawel@osciak.com> Acked-by:
-
Chanho Min authored
The pan/tilt absolute control value is signed value. If minimum value is minus, It will be changed to plus by clamp_t() as commit 64ae9958. ([media] uvcvideo: Fix control value clamping for unsigned integer controls). It leads to wrong setting of the control values. For example, when min and max are -36000 and 36000, the setting value between of this range is always 36000. So, its data type should be changed to signed. Signed-off-by:
Chanho Min <chanho.min@lge.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
drivers/media/pci/cx25821/cx25821-cards.c:49:20: warning: symbol 'cx25821_bcount' was not declared. Should it be static? drivers/media/pci/cx25821/cx25821-video-upstream.c:162:33: warning: incorrect type in assignment (different base types) drivers/media/pci/cx25821/cx25821-video-upstream.c:163:33: warning: incorrect type in assignment (different base types) drivers/media/pci/cx25821/cx25821-video-upstream.c:164:33: warning: incorrect type in assignment (different base types) drivers/media/pci/cx25821/cx25821-video-upstream.c:165:33: warning: incorrect type in assignment (different base types) drivers/media/pci/cx25821/cx25821-medusa-video.h:43:16: warning: symbol '_num_decoders' was not declared. Should it be static? drivers/media/pci/cx25821/cx25821-medusa-video.h:44:16: warning: symbol '_num_cameras' was not declared. Should it be static? drivers/media/pci/cx25821/cx25821-medusa-video.h:46:14: warning: symbol '_video_standard' was not declared. Should it be static? drivers/media/pci/cx25821/cx25821-medusa-video.h:47:5: warning: symbol '_display_field_cnt' was not declared. Should it be static? After analyzing the last four warnings carefully it became clear that these variables were really completely unused. As a result of that the call to medusa_set_decoderduration() is now dubious since the duration is always 0. Without documentation, however, I can't tell what the right value is. Signed-off-by:
-
Laurent Pinchart authored
struct v4l2_fh has an enum v4l2_priority field. Make sure the enum definition is available by including linux/videodev2.h. Signed-off-by:
-
Laurent Pinchart authored
v4l2-fh.h dereferences struct file, the structure must thus be defined. Pull in its definition by including linux/fs.h. Signed-off-by:
-
