- 25 Sep, 2018 1 commit
-
-
Linus Walleij authored
-
- 24 Sep, 2018 6 commits
-
-
Tony Lindgren authored
If a gpio instance has any GPIO bits requested we do a pm_runtime_get() on the device. Now with cpu_pm handling the deeper SoC idle state quirks, let's just remove pm_runtime_irq_safe() call and add a warning in case we ever happen to encounter it. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Tony Lindgren authored
For a long time the gpio-omap custom PM calls have been annoying me so let's replace them with cpu_pm instead. This will enable GPIO PM for deeper idle states on omap4. And we can handle GPIO PM for omap2/3/4 in the same way. Note that with this patch we are also slightly changing GPIO PM to be less aggressive for omap3 and only will idle GPIO when PER context may be lost. For omap2, we don't need to save context and don't want to remove any triggering so let's add a quirk flag for that. Let's do this all in a single patch to avoid a situation where old custom calls still are used with new code. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Tony Lindgren authored
I noticed that unlike omap2 and 3 based SoCs, omap4 based SoCs keep the GPIO clocks enabled for GPIO level interrupts with wakeup enabled. This blocks deeper idle states as the whole domain will stay busy. The GPIO functional clock seems to stay enabled if the wakeup register is enabled and a level interrupt is triggered. In that case the only way to have the GPIO module idle is to reset it. It is possible this has gone unnoticed with OSWR (Open SWitch Retention) and off mode during idle resetting GPIO context most GPIO instances in the earlier Android trees for example. Looks like the way to deal with this is to have omap4 based SoCs only set wake for the duration of idle for level interrupts, and clear level registers for the idle. With level interrupts we can do this as the level interrupt from device will be still there on resume. I've taken the long path to fixing this to avoid yet more hard to read code. I've set up a quirks flag, and a struct for function pointers so we can use these to clean up other quirk handling easier in the later patches. The current level quirk handling is moved to the new functions. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Janusz Krzysztofik authored
New code introduced by commit bf9346f5 ("gpiolib: Identify arrays matching GPIO hardware") forcibly tries to find an array member which has its array index number equal to its hardware pin number and set up an array info for possible fast bitmap processing of all arrray pins belonging to that chip which also satisfy that numbering rule. Depending on array content, it may happen that consecutive array members which belong to the same chip but don't have array indexes equal to their pin hardware numbers will be split into groups, some of them processed together via the fast bitmap path, and rest of them separetely. However, applications may expect all those pins being processed together with a single call to .set_multiple() chip callback, like that was done before the change. Limit applicability of fast bitmap processing path to cases where all pins of consecutive array members starting from 0 which belong to the same chip have their hardware numbers equal to their corresponding array indexes. That should still speed up processing of applications using whole GPIO banks as I/O ports, while not breaking simultaneous manipulation of consecutive pins of the same chip which don't follow the equal numbering rule. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Janusz Krzysztofik authored
In new code introduced by commit b17566a6 ("gpiolib: Implement fast processing path in get/set array"), bitmap index is not updated with next found zero bit position as it should while skipping over pins already processed via fast bitmap path, possibly resulting in an infinite loop. Fix it. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
Give the HTC EGPIO chips unique names, htc-egpio-0, htc-egpio-1 etc, so that it gets possible to associate machine descriptor tables with individual chips. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 20 Sep, 2018 8 commits
-
-
Linus Walleij authored
-
Linus Walleij authored
We remove the references to anything but two-cell GPIO specifiers and just mention that controllers need to specify their bindings and that we strongly recommend two-cell bindings. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
In 2011 the commit bf859f84 ("gpio/dt: Refine GPIO device tree binding") introduced an experimental BNF notation for defining a regular grammar for the GPIO phandles used by different devices. This was an interesting approach, and shows that we have long nutured the idea to formally verify device tree files using regular grammar. Most if not all other bindings use natural language to define the bindings, and the recent thinking for verifying device tree files is to use JSON schemas in separate definitions. Cut the BNF business and replace it with natural language so that it becomes more human-readable for now. Cc: devicetree@vger.kernel.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Kumar Gala <galak@kernel.crashing.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Andrew F. Davis authored
These defines, structs and inline functions are used only internally by the driver, they do not belong in platform_data. Move them. Signed-off-by: Andrew F. Davis <afd@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Andrew F. Davis authored
This macro does nothing and has only one user, remove it. Signed-off-by: Andrew F. Davis <afd@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Andrew F. Davis authored
Previously we created a controller structure per bank of GPIO pins. This has since been changed to one per controller, but the allocation size was not changed. Fix this here. This also leaves the variable 'nbank' unused, instead of removing it, move it down and use it to clean up a loop. For loops with multiple initializers and/or iteration expressions, especially ones that don't use those loop counters are quite hard to follow, fix this. Signed-off-by: Andrew F. Davis <afd@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Andrew F. Davis authored
Use dev_name to get a unique label and use -1 for a base to get our selection automatically. We pull in all GPIOs per chip now so this does not have the effect of out of order labels like before. We do these both together so we can drop all the static data in one patch. This also lets us normalize the return paths as we don't need any cleanup after this change. Signed-off-by: Andrew F. Davis <afd@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Andrew F. Davis authored
This was added as part of the patch in the fixes below, but was not needed or used, remove this here. Fixes: 8e11047b ("gpio: davinci: Add support for multiple GPIO controllers") Tested-by: Keerthy <j-keerthy@ti.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 17 Sep, 2018 15 commits
-
-
Linus Walleij authored
A bunch of core gpiolib files still include the <linux/gpio.h> legacy API header for no good reason. After this only the gpiolib-legacy.c file includes it, which is fine. The sysfs ABI code has a pointless wrapper function around gpio_to_desc() we can just loose. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
Just use the SPDX license tag for these drivers. Cc: patches@opensource.cirrus.com Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Mark Brown <broonie@kernel.org> Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
These are GPIO drivers so just include <linux/gpio/driver.h>. Cc: patches@opensource.cirrus.com Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: Mark Brown <broonie@kernel.org> Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
Just use the SPDX license tag for this file. Cc: Kamlakant Patel <kamlakant.patel@cavium.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This is a GPIO driver so include only <linux/gpio/driver.h>. Cc: Kamlakant Patel <kamlakant.patel@cavium.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
Just use the SPDX header for the license. Cc: Daniel Drake <drake@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This is a GPIO driver so include only <linux/gpio/driver.h>. Cc: Daniel Drake <drake@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
Just use the SPDX header for the license. Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This is a GPIO driver so include only <linux/gpio/driver.h>. Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
Just use the SPDX header for the license. Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This is a GPIO driver so include only <linux/gpio/driver.h>. Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This API is not used anywhere in the kernel and has remained unused for years after being introduced. Over time, we have developed a subsystem to deal with pin control and this now managed pull up/down. Delete the old and unused API. If this platform needs it, we should implement a proper pin controller for it instead. Cc: Yoichi Yuasa <yuasa@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This switches this file to use the SPDX license tag. Cc: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This is a GPIO driver so include only <linux/gpio/driver.h>. Cc: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Hans Verkuil authored
Some drivers use a single irqchip for multiple gpiochips. As a result the irqchip hooks are overridden for the first gpiochip that was added, but for the other gpiochip instances this should not happen again, otherwise we would go into an infinite recursion. Check for this, but also log a message that the driver should be fixed since this is bad practice. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 14 Sep, 2018 1 commit
-
-
Wolfram Sang authored
EINVAL is very generic, use ENOTSUPP in case the gpiochip does not provide this function. While removing the assignment from the 'status' variable, use better indentation in the declaration block. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 13 Sep, 2018 6 commits
-
-
Janusz Krzysztofik authored
Certain GPIO descriptor arrays returned by gpio_get_array() may contain information on direct mapping of array members to pins of a single GPIO chip in hardware order. In such cases, bitmaps of values can be passed directly from/to the chip's .get/set_multiple() callbacks without wasting time on iterations. Add respective code to gpiod_get/set_array_bitmap_complex() functions. Pins not applicable for fast path are processed as before, skipping over the 'fast' ones. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Janusz Krzysztofik authored
In order to make use of array info obtained from gpiod_get_array() and speed up processing of arrays matching single GPIO chip layout, that information must be passed to get/set array functions. Extend the functions' API with that additional parameter and update all users. Pass NULL if a user builds an array itself from single GPIOs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Janusz Krzysztofik authored
Certain GPIO array lookup results may map directly to GPIO pins of a single GPIO chip in hardware order. If that condition is recognized and handled efficiently, significant performance gain of get/set array functions may be possible. While processing a request for an array of GPIO descriptors, identify those which represent corresponding pins of a single GPIO chip. Skip over pins which require open source or open drain special processing. Moreover, identify pins which require inversion. Pass a pointer to that information with the array to the caller so it can benefit from enhanced performance as soon as get/set array functions can accept and make efficient use of it. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Janusz Krzysztofik authored
Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Uwe Kleine-König authored
This concerns gpio edge detection for GPIO IRQs used from userspace for GPIO event listeners. Trying to work out the right event if it's not sure that the examined gpio actually moved is impossible. Consider two gpios "gpioA" and "gpioB" that share an interrupt. gpioA's irq should trigger on any edge, gpioB's on a falling edge. If now the common irq fires and both gpio lines are high, there are several possibilities that could have happend: a) gpioA just had a low-to-high edge b) gpioB just had a high-to-low-to-high spike c) a combination of both a) and b) While c) is unlikely (in most setups) a) and b) alone are bad enough. Currently the code assumes case a) unconditionally and doesn't report an event for gpioB. Note that even if there is no irq sharing involved a spike for a gpio might not result in an event if it's configured to trigger for a single edge only. The only way to improve this is to drop support for interrupt sharing. This way a spike results in an event for the right gpio at least. Note that apart from dropping IRQF_SHARED this effectively undoes commit df1e76f2 ("gpiolib: skip unwanted events, don't convert them to opposite edge"). This obviously breaks setups that rely on interrupt sharing, but given that this cannot be reliable, this is probably an acceptable trade-off. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [Assuming there are no users of interrupt sharing yet] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 12 Sep, 2018 2 commits
-
-
Linus Walleij authored
Just use the SPDX identifier for the license. Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Linus Walleij authored
This is a GPIO driver so only include <linux/gpio/driver.h>. Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 11 Sep, 2018 1 commit
-
-
Wolfram Sang authored
The ';' was missing. And cosmetic: there was a space too much. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-