Release version typeB_V4.5

The stackup is properly done for Megtron 6. Include all improvements
from typeA_v4.5.

hardOrsTypeB/Exported OrsTypeB.Net

 [
+C243
+0402
+CAP_SM1nF
+
+
+
+]
+[
 C259
 0402
 CAP_SM0.4pF
@@ -153,7 +161,7 @@ RES_SM-0R
 [
 R139
 R0402-Phillips
-RES_SM-0
+RES_SM-0R
 
 
 
@@ -193,7 +201,7 @@ RJ45, Femelle, right angle
 [
 R139b
 R0402-Phillips
-RES_SM-0
+RES_SM-0R
 
 
 
@@ -3800,15 +3808,7 @@ CAP_SM1nF
 ]
 [
 C247
-0201
-CAP_SM1nF
-
-
-
-]
-[
-C243
-0201
+0402
 CAP_SM1nF
 
 
@@ -7157,12 +7157,12 @@ R163-2
 RXTX_CTL1
 R8x-2
 U3x-4
-U9x-6
+U9x-5
 )
 (
 RXTX_CTL1b
 R8xb-2
-U9xb-6
+U9xb-5
 U5x-4
 )
 (
@@ -7273,8 +7273,8 @@ MCT36
 C6y-2
 BrDg1y-D1D2
 BrDg1y-D1D2
-R18y-2
 T1y-21
+R18y-2
 R20y-1
 )
 (
@@ -8148,12 +8148,12 @@ U1-C17
 )
 (
 NetC242_2
+C244-2
 C243-1
-C242-2
 L11-3
 L13-1
-C244-2
 R125-2
+C242-2
 )
 (
 GPS_RESET_N
@@ -8500,10 +8500,10 @@ C190-1
 (
 NetC189_1
 FB10-1
-C193-1
 U17-38
-U17-39
+C193-1
 C189-1
+U17-39
 )
 (
 NetC223_1
@@ -8636,19 +8636,20 @@ C44-1
 U18-8
 R111-2
 C51-1
-U1-N21
 C31-1
+U1-N21
 R39-2
 R38-2
 U1-L17
-C36-1
 C35-1
-C30-1
 U1-K20
+C30-1
 C34-1
+U1-H16
 C32-1
 U1-G19
 U1-M4
+C36-1
 C33-1
 U1-N1
 C53-1
@@ -8657,7 +8658,6 @@ U1-J13
 C56-1
 U1-J3
 U1-H6
-U1-H16
 U1-F2
 C57-1
 U1-C1
@@ -9141,18 +9141,18 @@ R44-2
 (
 TX1A_P
 U13-M7
-L2-1
 C106-2
+L2-1
 )
 (
-RX1A_N
-U13-M2
-C102-2
+RX1A_P
+U13-M1
+C104-2
 )
 (
 TX2A_N
-L3-1
 C113-2
+L3-1
 U13-A7
 )
 (
@@ -9184,9 +9184,9 @@ L4-1
 U13-A8
 )
 (
-RX1A_P
-U13-M1
-C104-2
+RX1A_N
+U13-M2
+C102-2
 )
 (
 NetR16_2
@@ -9254,14 +9254,14 @@ C83y-2
 R138-1
 C124-1
 R137-1
-U13-B8
 C125-1
+U13-B8
 FB3-1
 J1-2
+C24-1
 C18-1
 C16-1
 U1-AA17
-C24-1
 U1-Y20
 C27-1
 R14-2
@@ -9273,7 +9273,6 @@ U1-U19
 U1-V16
 R72-2
 C25-1
-R71-2
 U1-R15
 C91-2
 U3-5
@@ -9319,15 +9318,15 @@ R11-2
 C37-1
 L15-1
 U1-P18
+R71-2
 C26-1
-C29-1
 U1-F22
-U1-M14
+C29-1
 L8-2
+U1-M14
 R69-2
-C219-1
 U1-F12
-C22-1
+C219-1
 C38-1
 C42-1
 U1-C21
@@ -9337,9 +9336,10 @@ R73-2
 C43-1
 C40-1
 U1-E15
+C22-1
 R55-1
-U1-A17
 R54-1
+U1-A17
 U1-B14
 C39-1
 )
@@ -9382,9 +9382,9 @@ CONN2-28
 (
 GND
 MTG11-0
+C186b-1
 C_ANT_F2-2
 C_ANT_F2-2
-C186b-1
 CU8b-1
 CU2b-2
 CA22b2-1
@@ -9438,13 +9438,13 @@ UPwCb2-1
 CD4b2-1
 CC4b2-1
 RL9b2-1
+RA9b2-2
 CA23b2-1
 MTG5-0
-RA9b2-2
-U11b2-7
 U11b2-2
-U9b2-PAD
 CA24b2-2
+U11b2-7
+U9b2-PAD
 CA27b2-2
 CA25b2-2
 CA26b2-1
@@ -9454,8 +9454,8 @@ UPwCb2-11
 UPwCb2-10
 UPwCb2-PAD
 UPwCb2-3
-UPwCb2-8
 UPwBb2-13
+UPwCb2-8
 UPwCb2-7
 UPwBb2-15
 UPwBb2-11
@@ -9500,15 +9500,15 @@ UPwAb2-11
 UPwAb2-10
 C46xb-1
 RL1b2-2
-U9xb-3
 U9xb-8
 CA16b2-2
+U9xb-3
 U9xb-4
 U9xb-PAD
-U9xb-5
-C39xb-1
+U9xb-6
 C42xb-1
 C37xb-1
+C39xb-1
 L5xb-2
 R36xb-1
 C47xb-1
@@ -9517,8 +9517,8 @@ C41xb-1
 UPwBb2-8
 UPwBb2-7
 UPwBb2-3
-CA4b2-1
 UPwBb2-4
+CA4b2-1
 UPwAb2-13
 UPwAb2-15
 UPwAb2-PAD
@@ -9533,26 +9533,26 @@ CA15b2-2
 RL9-1
 RA9-2
 CA23-1
-U11-7
 CA24-2
+U11-7
 MTG3-0
 U11-2
-CA26-1
 QA2-2
+CA26-1
 QA3-2
 CA25-2
 CA27-2
 RA8-2
 Q55-2
-U22-5
-U22-4
 C258-1
+U22-4
+U22-3
+U22-6
 U22-8
-U22-PAD
 R159-1
 C259-1
 C247-2
-U22-3
+U22-PAD
 R158-1
 R156-1
 T4-2
@@ -9565,8 +9565,8 @@ JM4-3
 JM4-7
 T4-5
 C329-2
-C319-2
 C118-2
+C319-2
 C119-2
 R161-1
 L12-2
@@ -9575,12 +9575,10 @@ T3-2
 T3-5
 T3-1
 C133-2
-U13-B1
 C126-2
+U13-B1
 C134-2
-U13-C1
 C312-2
-U13-C2
 C124-2
 C140-2
 C128-2
@@ -9589,29 +9587,29 @@ C139-2
 C318-2
 C127-2
 U13-A4
-U13-A5
 U13-B2
+U13-A5
 U13-A6
 C309-2
-U13-C4
 U13-C7
+U13-C8
+U13-C9
 U13-A12
 U13-B12
 U13-C10
-U13-C11
 U13-C12
 C210-2
 C211-2
 C212-2
 C208-1
 JM3-1
-C209-2
 R97-1
+C209-2
 U17-47
-C191-2
 C190-2
-C189-2
+C191-2
 C193-2
+C189-2
 C201-2
 C197-2
 U17-49
@@ -9685,30 +9683,32 @@ C238-2
 C173-2
 C135-2
 C136-2
-U13-D1
 U13-E1
 C132-2
 U13-F1
 C120-2
+U13-K1
+C114-2
+U13-D1
+U13-C1
 U13-G1
-C311-2
+U13-C2
 C131-2
+C311-2
 U13-H1
 C121-2
 U13-J1
-U13-J2
-U13-K1
 U13-H2
+U13-J2
 C307-2
+U13-C4
 U13-F3
-U13-C8
-U13-C9
-U13-H3
-R42-2
 U13-F9
 U13-F7
-U13-H6
+R42-2
+U13-H3
 U13-H7
+U13-H6
 U13-L1
 U13-L2
 U13-K2
@@ -9716,39 +9716,38 @@ U13-L3
 C310-2
 C308-2
 C115-2
-C111-2
+C110-2
 U13-M5
 U13-M4
+C111-2
 U13-L7
 U13-L8
 U13-L9
 U13-M6
-C103-2
 C141-2
-C241-1
+C103-2
 C244-1
 C243-2
-C242-1
 L11-2
-U21-5
+C241-1
+U21-6
 U21-4
 U21-3
-R153-1
 C257-1
 R155-1
+R153-1
 U21-8
 U21-PAD
 C256-1
-R152-1
 MTG8-0
+C242-1
 Q44-2
+T1-1
 T1-2
 T1-5
-C114-2
-T1-1
-C110-2
 C142-2
 R37-1
+R152-1
 R150-1
 T2-2
 T2-5
@@ -9757,33 +9756,34 @@ C316-2
 C108-2
 C330-2
 C109-2
+U13-C11
 C129-2
 U13-D12
-C130-2
 U13-F11
 C313-2
-U13-G12
 C138-2
 C137-2
+U13-G12
+C130-2
 C90-2
 C281-1
 U29-2
 C185-2
 U13-H10
-U13-K12
-U13-L11
 U13-L10
-C317-2
+U13-L11
+U13-K12
 U13-L12
+C317-2
 C122-2
 C123-2
 C331-2
 C184-2
 R41-1
 Y3-2
-R26-2
 MTG2-0
 C227-1
+R26-2
 R116-2
 CM10-2
 C229-2
@@ -9792,30 +9792,30 @@ C225-2
 C236-2
 C222-1
 C220-1
-J1-3
 J1-1
+J1-3
 J1-7
 J1-5
 J1-9
-J1-11
 J1-13
+J1-11
+C235-1
 C71-2
 C89-1
-C235-1
 U18-11
 U18-2
 C230-2
 C233-1
 U18-13
 U18-49
-C18-2
 U1-AB19
+C18-2
 U1-AB9
+R47-1
 C91-1
-U3-3
 U4-3
-R47-1
 R45-1
+U3-3
 C47-2
 C46-2
 U1-AA22
@@ -9829,11 +9829,11 @@ C21-2
 C16-2
 U1-Y5
 U1-AA2
-C44-2
-R80-1
 C17-2
+R80-1
 U1-W8
 R81-1
+C44-2
 R48-1
 R46-1
 C234-2
@@ -9850,8 +9850,8 @@ C232-1
 CM2-2
 C218-2
 U18-30
-R102-2
 R100-2
+R102-2
 C231-1
 C213-2
 C216-2
@@ -9879,26 +9879,26 @@ UPwD-4
 CC4-1
 UPwD-7
 UPwD-8
+UPwC-13
 CD15-2
 UPwC-15
-UPwC-13
 MTG10-0
 MTG7-0
 C186-1
 CU8-1
-CC6-1
 U6-PAD
 UPwC-11
-CC8-1
+CC6-1
 UPwC-10
+CC8-1
 CC16-2
 RL2-2
 UPwC-1
 U9-PAD
 CB4-1
 UPwC-PAD
-UPwC-8
 UPwC-7
+UPwC-8
 UPwC-3
 UPwC-4
 CC15-2
@@ -9940,16 +9940,16 @@ C_ANT_F1-2
 C_ANT_F1-2
 CU2-2
 US3-13
+US3-PAD
 US3-1
 US3-12
 US3-10
 US3-9
 US3-8
-US3-PAD
 US3-3
 US3-4
-US3-6
 US3-5
+US3-6
 Z1-PAD
 Z1-PAD
 Z1-PAD
@@ -9993,22 +9993,22 @@ U7-PAD
 U5-PAD
 Z1-PAD
 Z1-PAD
+RL3-2
 Z1-PAD
 Z1-PAD
-Z1-PAD
-RL3-2
 CA16-2
 UPwA-8
 R35x-1
 RL1-2
-U9x-8
 U9x-PAD
+U9x-8
 R36x-1
 C47x-1
-U9x-5
+U9x-6
 C39x-1
 L5x-2
 Z1-PAD
+Z1-PAD
 C46x-1
 C34z-1
 U14x-7
@@ -10045,17 +10045,17 @@ C57z-2
 J4-S
 R76z-2
 C37z-1
-C86-2
 PR10-2
 PR10-2
+C86-2
 C87-2
 U2-3
 R22-1
-C23-2
-C15-2
 R165-2
-R83-1
+C15-2
+C23-2
 U1-V21
+R83-1
 C27-2
 C28-2
 U1-R20
@@ -10075,10 +10075,10 @@ C36-2
 U1-K15
 C33-2
 C16x-1
+C328-1
 PR10-2
 PR5-2
 PR10-2
-C328-1
 R36-1
 C18x-1
 C146-1
@@ -10086,7 +10086,6 @@ U12-12
 PR5-2
 C327-1
 U12-10
-C12x-1
 U6x-3
 U1-H21
 C35-2
@@ -10094,13 +10093,13 @@ U1-J18
 C32-2
 U1-F17
 C34-2
-C40-2
 C37-2
+C42-2
 U5x-3
 U1-A22
-C42-2
 C38-2
 U1-E20
+C40-2
 C41-2
 U1-C16
 U1-B19
@@ -10110,54 +10109,54 @@ U1-T11
 C77-2
 U1-R12
 C180-2
+U1-P11
 C72-2
 U1-T9
 C85-2
 U1-T7
 U1-R10
 U1-R8
-U1-P9
 C29-2
 U1-P13
 C76-2
-U1-P11
-U1-M11
-U1-J12
-C75-2
+U1-P9
+C80-2
 U1-K11
+C75-2
+U1-J12
+U1-M11
 U1-J10
 C181-2
-C80-2
 U1-N8
 C82-2
 U1-P7
+U1-M7
 U1-L8
 U1-J8
 C79-2
-U1-M7
 FB7-1
 U1-K7
 U1-U4
 C49-2
+C45-2
 C48-2
 C50-2
 U1-N6
-C45-2
 U1-P3
+C54-2
 U1-V1
 C51-2
-CM6-2
-C54-2
 CM3-2
-Q6-3
 Q6-1
+CM6-2
+Q6-3
 C53-2
 C84-2
 R74-2
-C219-2
 U1-K5
 C81-2
 U1-L2
+C219-2
 C55-2
 R105-2
 CM5-2
@@ -10171,35 +10170,35 @@ U1-G14
 C74-2
 U1-H11
 U1-G12
-C22-2
 U1-E12
 U1-F11
+U1-E11
 U1-H9
-U1-G10
 C78-2
-U1-G8
-U1-E11
+U1-G10
 C59-2
 C61-2
+U1-G8
 U1-G9
 U1-E9
-U1-D8
 U1-D13
+C22-2
 U1-D12
 C39-2
 U1-C12
 U1-B12
 U1-A12
-C62-2
 U1-D9
+U1-D8
 C70-2
-U1-A11
 U1-C10
+C62-2
+U1-A11
 U1-C9
 U1-A9
 U1-H7
-C60-2
 C56-2
+C60-2
 U1-G7
 U1-E7
 U1-G6
@@ -10223,11 +10222,12 @@ U1-A5
 U1-A3
 C52-2
 CM7-2
-C69-2
 Q4-2
-U1-A2
+C69-2
 R140-2
+U1-A2
 PR5-2
+C12x-1
 C326-1
 PR5-2
 C14x-1
@@ -10237,6 +10237,7 @@ C2x-1
 U12-13
 C73y-1
 C63y-1
+R78y-2
 C62y-1
 C74y-1
 Q3y-S
@@ -10244,7 +10245,6 @@ Q3y-S
 U4x-3
 U3x-3
 U12-24
-R78y-2
 C85y-1
 R77y-1
 R82y-2
@@ -10280,15 +10280,15 @@ C80y-1
 C81y-1
 MTG3x-0
 C72y-1
-J2-2
 C71y-1
 C70y-1
+C4y-1
 C82y-1
 C84y-1
 C83y-1
 J2-S
+J2-2
 J2-S
-C4y-1
 C69y-1
 BrDg1y-S1
 BrDg2y-S4
@@ -10297,9 +10297,10 @@ C56y-1
 D7y-A
 D10y-A
 BrDg1y-S1
+BrDg2y-S1
 BrDg2y-S4
 D11y-A
-BrDg2y-S1
+C54y-1
 DS1b-A
 J1y-S
 MTG1x-0
@@ -10325,11 +10326,11 @@ CONN2-37
 CONN2-27
 CONN2-23
 CONN2-17
-CONN2-38
 CONN2-13
 CONN2-9
 CONN2-5
 CONN2-1
+CONN2-38
 Y1y-4
 C27y-1
 Y1y-2
@@ -10352,7 +10353,6 @@ C22y-2
 U4y-36
 U4y-35
 MTG4x-0
-C54y-1
 C55y-1
 R3y-1
 C8y-2
@@ -10365,8 +10365,8 @@ J3y-S
 U4y-9
 U4y-4
 U4y-10
-C12y-1
 C2y-2
+C12y-1
 U4y-11
 C14y-1
 U4y-22
@@ -10408,17 +10408,17 @@ LC1x-1
 LC2xb2-1
 CA20b2-2
 LC1xb2-1
-C241-2
 L12-1
 C245-2
+C241-2
 L11-1
 C34y-2
 C31y-2
 C43y-2
 C32y-2
 L9y-2
-CA20-2
 C186-2
+CA20-2
 FB14-1
 C41y-1
 R75y-2
@@ -10707,9 +10707,9 @@ R83y-2
 )
 (
 NetC65y_1
+C65y-1
 R64y-1
 U14y-19
-C65y-1
 Q3y-D
 L10y-2
 Q2y-S
@@ -10810,12 +10810,12 @@ R80y-1
 )
 (
 NetR125_1
-R125-1
 U21-1
+R125-1
 )
 (
 NetQ44_D
-U21-6
+U21-5
 R137-2
 Q44-3
 )
@@ -10823,7 +10823,7 @@ Q44-3
 NetQ55_D
 Q55-3
 R138-2
-U22-6
+U22-5
 )
 (
 NetR126_1
@@ -10865,8 +10865,8 @@ C41x-2
 )
 (
 NetC37xb_2
-L6xb-1
 C39xb-2
+L6xb-1
 C41xb-2
 R30xb-2
 C37xb-2
@@ -10939,16 +10939,16 @@ CA25b2-1
 VCC1b2
 CA21b2-2
 LC1xb2-3
-CD16b2-1
 UPwDb2-6
+CD15b2-1
 U11b2-1
 U11b2-3
 UPwDb2-5
 CA27b2-1
+CD16b2-1
 CC16b2-1
 CB16b2-1
 CA16b2-1
-CD15b2-1
 UPwCb2-6
 UPwCb2-5
 CC15b2-1

hardOrsTypeB/ORS_TypeB_8Layers.OutJob

@@ -17,11 +17,11 @@ RevisionNamingSchemeGUID=
 [OutputGroup1]
 Name=ORS_TypeB_8Layers.OutJob
 Description=
-TargetOutputMedium=Assembly
+TargetOutputMedium=Gerbers
 VariantName=[No Variations]
 VariantScope=0
 CurrentConfigurationName=
-TargetPrinter=Virtual Printer
+TargetPrinter=Brother MFC-660CN
 PrinterOptions=Record=PrinterOptions|Copies=1|Duplex=1|TrueTypeOptions=3|Collate=1|PrintWhat=0
 OutputMedium1=Print Job
 OutputMedium1_Type=Printer
@@ -50,7 +50,7 @@ OutputName1=NC Drill Files
 OutputCategory1=Fabrication
 OutputDocumentPath1=
 OutputVariantName1=
-OutputEnabled1=0
+OutputEnabled1=1
 OutputEnabled1_OutputMedium1=0
 OutputEnabled1_OutputMedium2=0
 OutputEnabled1_OutputMedium3=0
@@ -68,7 +68,7 @@ OutputName2=Gerber Files
 OutputCategory2=Fabrication
 OutputDocumentPath2=
 OutputVariantName2=
-OutputEnabled2=0
+OutputEnabled2=1
 OutputEnabled2_OutputMedium1=0
 OutputEnabled2_OutputMedium2=0
 OutputEnabled2_OutputMedium3=0
@@ -190,7 +190,7 @@ OutputName8=Assembly-ORS_TDDN77_3800-4000
 OutputCategory8=Assembly
 OutputDocumentPath8=
 OutputVariantName8=TDDN77_3800-4000
-OutputEnabled8=1
+OutputEnabled8=0
 OutputEnabled8_OutputMedium1=0
 OutputEnabled8_OutputMedium2=0
 OutputEnabled8_OutputMedium3=0
@@ -233,7 +233,7 @@ OutputName9=Assembly-ORS_TDDN79_4600-5000
 OutputCategory9=Assembly
 OutputDocumentPath9=
 OutputVariantName9=TDDN79_4600-5000
-OutputEnabled9=1
+OutputEnabled9=0
 OutputEnabled9_OutputMedium1=0
 OutputEnabled9_OutputMedium2=0
 OutputEnabled9_OutputMedium3=0

hardOrsTypeB/Project Logs for OrsTypeB/OrsTypeB PCB ECO 17-03-2023 11-44-05.LOG

-Removed Pin From Net: NetName=GND Pin=C47x-2
-Removed Pin From Net: NetName=GND Pin=C47xb-2
-Change Component Comment : Designator=C47x Old Comment=CAP_SM5.6pF New Comment=CAP_SM0.4pF
-Change Component Comment : Designator=C47xb Old Comment=CAP_SM5.6pF New Comment=CAP_SM0.4pF
-Change Component Comment : Designator=C46x Old Comment=CAP_SM10pF New Comment=CAP_SM0.2pF
-Change Component Comment : Designator=C46xb Old Comment=CAP_SM10pF New Comment=CAP_SM0.2pF
-Added Pin To Net: NetName=NetC44x_2 Pin=C46x-2
-Added Pin To Net: NetName=NetC44xb_2 Pin=C46xb-2
-Added Pin To Net: NetName=NetC45x_2 Pin=C47x-2
-Added Pin To Net: NetName=GND Pin=C47xb-1
-Added Pin To Net: NetName=NetC45xb_2 Pin=C47xb-2
-Added Member To Class: ClassName=OrsTypeB_Pwr_1 Member=Component C44x CAP_SM10pF
-Added Member To Class: ClassName=b Member=Component C46xb (C46x) CAP_SM0.2pF
-Added Member To Class: ClassName=b Member=Component C47xb (C47x) CAP_SM0.4pF
-Added Member To Class: ClassName=OrsTypeB_Pwr_1 Member=Component C47x CAP_SM0.4pF

hardOrsTypeB/Project Logs for OrsTypeB/OrsTypeB PCB ECO 17-03-2023 12-13-58.LOG

-Change Component Comment : Designator=C257 Old Comment=CAP_SM5.6pF New Comment=CAP_SM0.2pF
-Change Component Comment : Designator=C256 Old Comment=CAP_SM5.6pF New Comment=CAP_SM0.4pF
-Change Component Comment : Designator=C258 Old Comment=CAP_SM5.6pF New Comment=CAP_SM0.4pF
-Change Component Comment : Designator=C259 Old Comment=CAP_SM5.6pF New Comment=CAP_SM0.4pF
-Added Pin To Net: NetName=GND Pin=C256-1
-Added Pin To Net: NetName=NetC249_1 Pin=C256-2
-Added Pin To Net: NetName=GND Pin=C257-1
-Added Pin To Net: NetName=NetC253_1 Pin=C257-2
-Added Pin To Net: NetName=GND Pin=C258-1
-Added Pin To Net: NetName=NetC251_2 Pin=C258-2
-Added Pin To Net: NetName=GND Pin=C259-1
-Added Pin To Net: NetName=NetC255_1 Pin=C259-2
-Added Member To Class: ClassName=root Member=Component C256 CAP_SM0.4pF
-Added Member To Class: ClassName=root Member=Component C257 CAP_SM0.2pF
-Added Member To Class: ClassName=root Member=Component C258 CAP_SM0.4pF
-Added Member To Class: ClassName=root Member=Component C259 CAP_SM0.4pF

hardOrsTypeB/Project Logs for OrsTypeB/OrsTypeB PCB ECO 17-03-2023 15-23-41.LOG

-Removed Pin From Net: NetName=NetC251_2 Pin=C258-2
-Change Component Comment : Designator=C257 Old Comment=CAP_SM0.2pF New Comment=CAP_SM0.4pF
-Change Component Comment : Designator=C256 Old Comment=CAP_SM0.4pF New Comment=CAP_SM0.2pF
-Change Component Comment : Designator=C258 Old Comment=CAP_SM0.4pF New Comment=CAP_SM0.2pF
-Added Pin To Net: NetName=NetC251_1 Pin=C258-2

hardOrsTypeB/Project Logs for OrsTypeB/OrsTypeB PCB ECO 17-03-2023 16-30-12.LOG

-Change Component Description : Designator=Z1 Old Description=FilterCeramic 2.3GHz-2.4GHz New Description=Band Pass Filter
-Change Component Description : Designator=Z1b Old Description=FilterCeramic 2.3GHz-2.4GHz New Description=Band Pass Filter

hardOrsTypeB/Project Outputs for OrsTypeB/Design Rule Check - OrsTypeB.drc

 Protel Design System Design Rule Check
 PCB File : V:\Work\Projets\RapidSpaceLocal\ors-hardware\hardOrsTypeB\OrsTypeB.PcbDoc
-Date     : 17/03/2023
-Time     : 16:48:49
+Date     : 18/04/2023
+Time     : 17:21:03
 
-Processing Rule : Clearance Constraint (Gap=0.21mm) (InPolygon),(All)
+Processing Rule : Clearance Constraint (Gap=0.15mm) (InNetClass('DiffPairNetClass100Ohms_1_2')),(InPolygon)
 Rule Violations :0
 
-Processing Rule : Clearance Constraint (Gap=0.2mm) (InNamedPolygon('TOP-GND') OR InNamedPolygon('GND-BOTTOM_PWR1')),(All)
+Processing Rule : Clearance Constraint (Gap=0.15mm) (InNetClass('50OhmsL8toL5')),(InPolygon)
 Rule Violations :0
 
-Processing Rule : Clearance Constraint (Gap=0.12mm) (All),(IsVia)
+Processing Rule : Matched Net Lengths(Tolerance=0.3mm) (InNetClass('POENetClass1'))
 Rule Violations :0
 
-Processing Rule : Clearance Constraint (Gap=0.2mm) (InNamedPolygon('L4-+12V-2')OR  InNamedPolygon('L4-+12V')OR InNamedPolygon('BOTTOM+12V')OR InNamedPolygon('BOTTOM+12V-1')OR InNamedPolygon('L6_NoNet2') OR InNamedPolygon('L6_NoNet')),(All)
+Processing Rule : Matched Net Lengths(Tolerance=0.5mm) (InNetClass('POENetClass2'))
 Rule Violations :0
 
-Processing Rule : Clearance Constraint (Gap=0.5mm) (InNetClass('50OhmsL8tol4')),(InPolygon)
+Processing Rule : Clearance Constraint (Gap=0.1mm) (All),(All)
 Rule Violations :0
 
-Processing Rule : Clearance Constraint (Gap=0.5mm) (InNamedPolygon('L5_NoNet') OR InNamedPolygon('L6_NoNet') OR InNamedPolygon('L4_NoNet') OR InNamedPolygon('L7_NoNet')OR InNamedPolygon('L3_NoNet')),(All)
+Processing Rule : Clearance Constraint (Gap=0.2mm) (InNetClass('50OhmsL1toL2')),(InPolygon)
 Rule Violations :0
 
-Processing Rule : Clearance Constraint (Gap=0.1mm) (InNetClass('DiffPairNetClass')),(All)
+Processing Rule : Net Antennae (Tolerance=0mm) (Disabled)(All)
 Rule Violations :0
 
-Processing Rule : Short-Circuit Constraint (Allowed=No) (All),(All)
+Processing Rule : Silk to Silk (Clearance=0.2mm) (Disabled)(All),(All)
 Rule Violations :0
 
-Processing Rule : Un-Routed Net Constraint ( (All) )
+Processing Rule : Silk To Solder Mask (Clearance=0.2mm) (Disabled)(IsPad),(All)
 Rule Violations :0
 
-Processing Rule : Power Plane Connect Rule(Direct Connect )(Expansion=0.508mm) (Conductor Width=0.254mm) (Air Gap=0.254mm) (Entries=4) (All)
+Processing Rule : Minimum Solder Mask Sliver (Gap=0.05mm) (All),(All)
 Rule Violations :0
 
-Processing Rule : Width Constraint (Min=0.1mm) (Max=10mm) (Preferred=0.254mm) (All)
+Processing Rule : Hole To Hole Clearance (Gap=0.25mm) (All),(All)
+Rule Violations :0
+
+Processing Rule : Hole Size Constraint (Min=0.02mm) (Max=3.5mm) (All)
 Rule Violations :0
 
 Processing Rule : Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)
 Rule Violations :0
 
-Processing Rule : Hole Size Constraint (Min=0.02mm) (Max=3.5mm) (All)
+Processing Rule : Width Constraint (Min=0.1mm) (Max=10mm) (Preferred=0.254mm) (All)
 Rule Violations :0
 
-Processing Rule : Hole To Hole Clearance (Gap=0.25mm) (All),(All)
+Processing Rule : Power Plane Connect Rule(Direct Connect )(Expansion=0.508mm) (Conductor Width=0.254mm) (Air Gap=0.254mm) (Entries=4) (All)
 Rule Violations :0
 
-Processing Rule : Minimum Solder Mask Sliver (Gap=0.05mm) (All),(All)
+Processing Rule : Un-Routed Net Constraint ( (All) )
 Rule Violations :0
 
-Processing Rule : Silk To Solder Mask (Clearance=0.2mm) (Disabled)(IsPad),(All)
+Processing Rule : Short-Circuit Constraint (Allowed=No) (All),(All)
 Rule Violations :0
 
-Processing Rule : Silk to Silk (Clearance=0.2mm) (Disabled)(All),(All)
+Processing Rule : Clearance Constraint (Gap=0.1mm) (InNetClass('DiffPairNetClass')),(All)
 Rule Violations :0
 
-Processing Rule : Net Antennae (Tolerance=0mm) (Disabled)(All)
+Processing Rule : Clearance Constraint (Gap=0.5mm) (InNamedPolygon('L5_NoNet') OR InNamedPolygon('L6_NoNet') OR InNamedPolygon('L4_NoNet') OR InNamedPolygon('L7_NoNet')OR InNamedPolygon('L3_NoNet')),(All)
 Rule Violations :0
 
-Processing Rule : Clearance Constraint (Gap=0.6mm) (InNetClass('50OhmsL1toL2')),(InPolygon)
+Processing Rule : Clearance Constraint (Gap=0.35mm) (InNetClass('HighIsolation')),(All)
 Rule Violations :0
 
-Processing Rule : Clearance Constraint (Gap=0.1mm) (All),(All)
+Processing Rule : Clearance Constraint (Gap=0.2mm) (InNamedPolygon('L4-+12V-2')OR  InNamedPolygon('L4-+12V')OR InNamedPolygon('BOTTOM+12V')OR InNamedPolygon('BOTTOM+12V-1')OR InNamedPolygon('L6_NoNet2') OR InNamedPolygon('L6_NoNet')),(All)
 Rule Violations :0
 
-Processing Rule : Matched Net Lengths(Tolerance=0.5mm) (InNetClass('POENetClass2'))
+Processing Rule : Clearance Constraint (Gap=0.12mm) (All),(IsVia)
 Rule Violations :0
 
-Processing Rule : Matched Net Lengths(Tolerance=0.3mm) (InNetClass('POENetClass1'))
+Processing Rule : Clearance Constraint (Gap=0.2mm) (InNamedPolygon('TOP-GND') OR InNamedPolygon('GND-BOTTOM_PWR1')),(All)
 Rule Violations :0
 
-Processing Rule : Clearance Constraint (Gap=0.21mm) (InNetClass('50OhmsL8toL5')),(InPolygon)
+Processing Rule : Clearance Constraint (Gap=0.21mm) (InPolygon),(All)
 Rule Violations :0
 
-Processing Rule : Clearance Constraint (Gap=0.12mm) (InNetClass('DiffPairNetClass100Ohms_1_2')),(InPolygon)
+Processing Rule : Clearance Constraint (Gap=0.5mm) (InNetClass('50OhmsL8tol4')),(InPolygon)
 Rule Violations :0
 
 
 Violations Detected : 0
-Time Elapsed        : 00:02:12
\ No newline at end of file
+Time Elapsed        : 00:02:07
\ No newline at end of file

hardOrsTypeB/Project Outputs for OrsTypeB/Gerber/Gerber Files.EXTREP

 ------------------------------------------------------------------------------------------
-Gerber File Extension Report For: Gerber Files.GBR   17/03/2023  16:51:35
+Gerber File Extension Report For: Gerber Files.GBR   18/04/2023  17:26:15
 ------------------------------------------------------------------------------------------
 
 

hardOrsTypeB/Project Outputs for OrsTypeB/Gerber/Gerber Files.REP

@@ -189,16 +189,17 @@ Generating : L2
 
 
 Used DCodes :
-    D52
-    D79
-    D106
+    D12
+    D13
+    D50
+    D161
     D162
-    D165
+    D163
     D166
     D167
     D168
     D169
-    D171
+    D170
     D172
     D173
 *************************************************************
@@ -216,20 +217,21 @@ Generating : L3
 
 Used DCodes :
     D12
-    D52
-    D79
+    D13
+    D50
     D102
+    D103
     D104
     D105
     D106
-    D107
-    D108
     D109
     D110
     D111
-    D115
+    D112
+    D113
+    D161
     D162
-    D163
+    D165
     D166
     D167
     D168
@@ -253,21 +255,23 @@ Generating : L4
 
 
 Used DCodes :
-    D52
-    D79
-    D103
+    D12
+    D13
+    D50
+    D102
     D104
-    D105
     D106
     D107
-    D109
+    D110
     D111
+    D161
     D162
-    D163
+    D165
     D166
     D167
     D168
     D169
+    D170
     D178
     D179
 *************************************************************
@@ -284,19 +288,20 @@ Generating : L5
 
 
 Used DCodes :
-    D52
-    D79
-    D105
+    D12
+    D13
+    D50
+    D102
     D106
-    D107
-    D115
+    D113
+    D161
     D162
-    D165
+    D163
     D166
     D167
     D168
     D169
-    D171
+    D170
     D178
     D179
 *************************************************************
@@ -313,24 +318,26 @@ Generating : L6
 
 
 Used DCodes :
-    D52
-    D79
+    D12
+    D13
+    D50
     D102
     D103
     D104
     D105
     D106
     D107
-    D108
-    D110
+    D109
     D111
-    D115
-    D148
+    D113
+    D129
+    D161
     D162
     D166
     D167
     D168
     D169
+    D170
     D174
     D175
     D179
@@ -350,13 +357,12 @@ Generating : L7
 
 
 Used DCodes :
-    D12
-    D52
-    D79
-    D103
-    D105
-    D111
-    D112
+    D13
+    D50
+    D102
+    D104
+    D115
+    D161
     D162
     D163
     D165
@@ -367,6 +373,8 @@ Used DCodes :
     D170
     D171
     D179
+    D182
+    D183
 *************************************************************
 
 *************************************************************
@@ -383,50 +391,50 @@ Generating : BOTTOM
 Used DCodes :
     D10
     D12
+    D13
     D15
-    D16
-    D17
-    D18
-    D19
     D21
-    D22
     D23
+    D25
+    D26
     D27
+    D28
+    D29
+    D30
+    D31
     D32
     D33
     D34
-    D35
-    D40
+    D37
+    D38
+    D39
+    D42
     D43
-    D52
-    D54
-    D57
-    D62
-    D63
-    D69
-    D79
-    D80
-    D84
-    D85
-    D86
+    D44
+    D48
+    D49
+    D50
+    D64
+    D65
+    D66
+    D67
+    D68
+    D72
+    D75
     D88
-    D89
-    D90
-    D91
-    D94
-    D95
-    D96
+    D98
     D102
     D103
     D104
     D105
     D106
-    D107
-    D108
     D109
     D110
     D111
-    D115
+    D112
+    D113
+    D116
+    D161
     D162
     D163
     D164
@@ -599,6 +607,10 @@ Used DCodes :
     D340
     D341
     D342
+    D343
+    D344
+    D345
+    D346
 *************************************************************
 
 *************************************************************
@@ -611,16 +623,13 @@ Generating : Top Overlay
 
 
 Used DCodes :
-    D104
-    D105
-    D106
-    D109
+    D12
+    D102
+    D110
+    D111
+    D161
     D162
     D174
-    D343
-    D344
-    D345
-    D346
     D347
     D348
     D349
@@ -667,6 +676,9 @@ Used DCodes :
     D390
     D391
     D392
+    D393
+    D394
+    D395
 *************************************************************
 
 *************************************************************
@@ -772,11 +784,9 @@ Used DCodes :
     D99
     D100
     D101
-    D134
+    D143
+    D161
     D162
-    D393
-    D394
-    D395
     D396
     D397
     D398
@@ -786,6 +796,9 @@ Used DCodes :
     D402
     D403
     D404
+    D405
+    D406
+    D407
 *************************************************************
 
 *************************************************************
@@ -802,28 +815,26 @@ Generating : Top Solder
 
 
 Used DCodes :
-    D23
-    D52
-    D65
-    D79
-    D91
-    D93
-    D95
-    D102
-    D107
+    D13
+    D33
+    D35
+    D37
+    D50
+    D62
+    D72
+    D103
+    D106
+    D161
     D162
-    D166
+    D167
     D168
     D169
-    D182
-    D185
-    D195
-    D278
-    D281
-    D284
-    D405
-    D406
-    D407
+    D190
+    D209
+    D217
+    D285
+    D286
+    D289
     D408
     D409
     D410
@@ -914,6 +925,9 @@ Used DCodes :
     D495
     D496
     D497
+    D498
+    D499
+    D500
 *************************************************************
 
 *************************************************************
@@ -930,44 +944,41 @@ Generating : Bottom Solder
 
 
 Used DCodes :
-    D91
-    D95
+    D33
+    D37
+    D161
     D162
-    D166
+    D167
     D168
     D169
-    D185
-    D195
-    D278
-    D417
-    D418
+    D190
+    D217
+    D285
     D419
-    D420
-    D421
-    D423
     D424
+    D426
     D428
+    D429
+    D430
+    D431
+    D432
     D433
     D434
-    D435
-    D440
-    D450
-    D452
-    D457
-    D458
+    D437
+    D438
+    D439
+    D441
+    D442
+    D446
+    D447
+    D461
+    D462
+    D463
     D464
-    D474
-    D478
-    D479
-    D480
-    D481
-    D482
-    D483
-    D486
-    D487
-    D494
-    D495
-    D496
+    D465
+    D469
+    D472
+    D492
     D497
     D498
     D499
@@ -1070,6 +1081,10 @@ Used DCodes :
     D596
     D597
     D598
+    D599
+    D600
+    D601
+    D602
 *************************************************************
 
 *************************************************************
@@ -1087,41 +1102,37 @@ Generating : Bottom Paste
 
 Used DCodes :
     D15
-    D16
-    D17
-    D18
-    D19
     D21
-    D22
     D23
+    D25
+    D26
     D27
+    D28
+    D29
+    D30
+    D31
     D32
     D33
     D34
-    D35
-    D40
+    D37
+    D38
+    D39
+    D42
     D43
-    D54
-    D57
-    D62
-    D63
-    D69
-    D80
-    D84
-    D85
-    D86
+    D44
+    D48
+    D49
+    D64
+    D65
+    D66
+    D67
+    D68
+    D72
+    D75
     D88
-    D89
-    D90
-    D91
-    D94
-    D95
-    D96
+    D98
+    D161
     D162
-    D182
-    D183
-    D184
-    D185
     D186
     D187
     D188
@@ -1132,7 +1143,6 @@ Used DCodes :
     D193
     D194
     D195
-    D196
     D197
     D198
     D199
@@ -1207,6 +1217,7 @@ Used DCodes :
     D268
     D269
     D270
+    D271
     D272
     D273
     D274
@@ -1216,16 +1227,21 @@ Used DCodes :
     D278
     D279
     D280
-    D599
-    D600
-    D601
-    D602
+    D281
+    D282
+    D283
+    D284
+    D285
     D603
     D604
     D605
     D606
     D607
     D608
+    D609
+    D610
+    D611
+    D612
 *************************************************************
 
 *************************************************************
@@ -1238,44 +1254,40 @@ Generating : Bottom Overlay
 
 
 Used DCodes :
+    D12
     D102
     D103
-    D104
-    D105
     D106
-    D107
     D109
     D110
-    D119
+    D111
+    D157
+    D161
     D162
     D174
-    D343
-    D344
-    D351
-    D352
-    D353
-    D354
-    D355
+    D182
+    D347
+    D348
     D358
     D359
     D360
+    D361
     D362
     D363
     D364
     D368
     D369
-    D370
-    D371
+    D373
     D374
-    D378
+    D380
+    D381
     D382
     D383
-    D386
+    D384
+    D385
     D387
-    D609
-    D610
-    D611
-    D612
+    D390
+    D391
     D613
     D614
     D615
@@ -1296,6 +1308,10 @@ Used DCodes :
     D630
     D631
     D632
+    D633
+    D634
+    D635
+    D636
 *************************************************************
 
 *************************************************************
@@ -1308,16 +1324,18 @@ Generating : Mechanical 1
 
 
 Used DCodes :
+    D161
     D162
     D174
-    D610
-    D613
     D614
-    D633
-    D634
-    D635
-    D636
+    D615
+    D616
     D637
+    D638
+    D639
+    D640
+    D641
+    D642
 *************************************************************
 
 *************************************************************
@@ -1330,21 +1348,22 @@ Generating : Mechanical 2
 
 
 Used DCodes :
-    D105
-    D109
+    D102
+    D110
+    D161
     D162
     D174
-    D343
-    D610
-    D611
-    D613
+    D347
     D614
-    D638
-    D639
-    D640
-    D641
-    D642
+    D615
+    D616
+    D617
     D643
+    D644
+    D645
+    D646
+    D647
+    D648
 *************************************************************
 
 *************************************************************
@@ -1357,21 +1376,23 @@ Generating : Mechanical 3
 
 
 Used DCodes :
-    D105
+    D102
+    D161
     D162
     D174
-    D343
-    D348
-    D611
-    D613
-    D614
-    D640
-    D643
-    D644
+    D347
+    D350
+    D351
+    D615
+    D616
+    D617
     D645
-    D646
-    D647
     D648
+    D649
+    D650
+    D651
+    D652
+    D653
 *************************************************************
 
 *************************************************************
@@ -1384,13 +1405,14 @@ Generating : SOLE_EDGE-V4
 
 
 Used DCodes :
+    D161
     D162
     D174
-    D610
-    D639
-    D649
-    D650
-    D651
+    D614
+    D644
+    D654
+    D655
+    D656
 *************************************************************
 
 *************************************************************
@@ -1403,6 +1425,7 @@ Generating : DIMENSION
 
 
 Used DCodes :
+    D161
     D162
 *************************************************************
 

hardOrsTypeB/Project Outputs for OrsTypeB/Gerber/Gerber Files.RUL

 DRC Rules Export File for PCB: V:\Work\Projets\RapidSpaceLocal\ors-hardware\hardOrsTypeB\OrsTypeB.PcbDoc
-RuleKind=Clearance|RuleName=PolyGon Clearance_ALL|Scope=Board|Minimum=8.27
-RuleKind=Clearance|RuleName=PolyGon Clearance_GND|Scope=Board|Minimum=7.87
-RuleKind=Clearance|RuleName=Clearance-Via_1|Scope=Board|Minimum=4.72
-RuleKind=Clearance|RuleName=PolyGon Pour Clearance_12V|Scope=Board|Minimum=7.87
-RuleKind=Clearance|RuleName=50OhmsL8toL4|Scope=Board|Minimum=19.69
-RuleKind=Clearance|RuleName=PolyGon PourClearance_NoNet|Scope=Board|Minimum=19.69
-RuleKind=Clearance|RuleName=DiffPairNetClass|Scope=Board|Minimum=3.94
-RuleKind=ShortCircuit|RuleName=ShortCircuit|Scope=Board|Allowed=0
-RuleKind=Width|RuleName=Width|Scope=Board|Minimum=3.94
-RuleKind=SolderMaskExpansion|RuleName=SolderMaskExpansion|Scope=Board|Minimum=1.97
-RuleKind=Clearance|RuleName=50OhmsL1toL2|Scope=Board|Minimum=23.62
+RuleKind=Clearance|RuleName=100OhmsL8toL1_2|Scope=Board|Minimum=5.91
+RuleKind=Clearance|RuleName=50OhmsL8toL5|Scope=Board|Minimum=5.91
 RuleKind=Clearance|RuleName=Clearance|Scope=Board|Minimum=3.94
-RuleKind=Clearance|RuleName=50OhmsL8toL5|Scope=Board|Minimum=8.27
-RuleKind=Clearance|RuleName=100OhmsL8toL1_2|Scope=Board|Minimum=4.72
+RuleKind=Clearance|RuleName=50OhmsL1toL2|Scope=Board|Minimum=7.87
+RuleKind=SolderMaskExpansion|RuleName=SolderMaskExpansion|Scope=Board|Minimum=1.97
+RuleKind=Width|RuleName=Width|Scope=Board|Minimum=3.94
+RuleKind=ShortCircuit|RuleName=ShortCircuit|Scope=Board|Allowed=0
+RuleKind=Clearance|RuleName=DiffPairNetClass|Scope=Board|Minimum=3.94
+RuleKind=Clearance|RuleName=PolyGon PourClearance_NoNet|Scope=Board|Minimum=19.69
+RuleKind=Clearance|RuleName=HighIsolation|Scope=Board|Minimum=13.78
+RuleKind=Clearance|RuleName=PolyGon Pour Clearance_12V|Scope=Board|Minimum=7.87
+RuleKind=Clearance|RuleName=Clearance-Via_1|Scope=Board|Minimum=4.72
+RuleKind=Clearance|RuleName=PolyGon Clearance_GND|Scope=Board|Minimum=7.87
+RuleKind=Clearance|RuleName=PolyGon Clearance_ALL|Scope=Board|Minimum=8.27
+RuleKind=Clearance|RuleName=50OhmsL8toL4_1|Scope=Board|Minimum=19.69

hardOrsTypeB/Project Outputs for OrsTypeB/NC Drill/NC Drill Files.DRR

 ---------------------------------------------------------------------------
-NCDrill File Report For: OrsTypeB.PcbDoc   17/03/2023  16:51:49
+NCDrill File Report For: OrsTypeB.PcbDoc   18/04/2023  17:26:28
 ---------------------------------------------------------------------------
 
 Layer Pair : TOP to BOTTOM
@@ -8,14 +8,14 @@ ASCII Non-Plated RoundHoles File : NC Drill Files-NonPlated.TXT
 
 Tool         Hole Size           Hole Type     Hole Count Plated       Tool Travel
 ---------------------------------------------------------------------------
-T1        0.2mm (7.874mil)         Round          2497             4655.43 mm (183.28 Inch)
-T2        0.25mm (9.842mil)        Round          1811             4546.94 mm (179.01 Inch)
-T3        0.3mm (11.811mil)        Round          223              921.30 mm (36.27 Inch)
-T4        0.5mm (19.685mil)        Round          34               313.99 mm (12.36 Inch)
+T1        0.2mm (7.874mil)         Round          2500             4616.68 mm (181.76 Inch)
+T2        0.25mm (9.842mil)        Round          1811             4649.14 mm (183.04 Inch)
+T3        0.3mm (11.811mil)        Round          223              984.41 mm (38.76 Inch)
+T4        0.5mm (19.685mil)        Round          34               306.23 mm (12.06 Inch)
 T5        2.6mm (102.362mil)       Round          17               650.39 mm (25.61 Inch)
 T6        3.25mm (127.953mil)      Round          4                35.10 mm (1.38 Inch)
 T7        1mm (39.37mil)           Round          8         NPTH   301.02 mm (11.85 Inch)
 ---------------------------------------------------------------------------
-Totals                                            4594             11424.18 mm (449.77 Inch)
+Totals                                            4597             11542.97 mm (454.45 Inch)
 
 Total Processing Time (hh:mm:ss) : 00:00:02

hardOrsTypeB/Project Outputs for OrsTypeB/Status Report.Txt

-Output: NC Drill Files
-Type  : NC Drill
-From  : PCB Document [OrsTypeB.PcbDoc]
-   Generated File[NC Drill Files-Plated.TXT]
-   Generated File[NC Drill Files-NonPlated.TXT]
-   Generated File[NC Drill Files.LDP]
-   Generated File[NC Drill Files.DRR]
-
-
-Files Generated   : 4
-Documents Printed : 0
-
-Finished Output Generation At 16:51:51 On 17/03/2023