zc.buildout 3.0.1+slapos001: Rebase on zc.buildout 3.0.1

See merge request !30

doc/getting-started.rst

@@ -28,11 +28,15 @@ The recommended way to install Buildout is to use pip within a virtual environme
 
 .. code-block:: console
 
-  virtualenv mybuildout
-  cd mybuildout
-  bin/pip install zc.buildout
+  python3 -m venv myenv
+  source myenv/bin/activate
+  pip install zc.buildout
 
+Or for the code from master branch:
 
+.. code-block:: console
+
+  pip install https://lab.nexedi.com/nexedi/slapos.buildout/-/archive/master/slapos.buildout-master.tar.gz
 
 To use Buildout, you need to provide a Buildout configuration. Here is
 a minimal configuration:
@@ -98,6 +102,33 @@ specified using *parts*.  The parts to be built are listed in the
 name that specifies the software to build the part and provides
 parameters to control how the part is built.
 
+
+Bootstrapping an isolated environment
+=====================================
+
+Sometimes it is useful to install ``zc.buildout`` and its dependencies
+directly in ``eggs`` directory and to generate a ``buildout`` script in
+the ``bin`` directory that uses the version in ``eggs`` directory,
+instead of relying on the package available in the environment.
+
+One way to achieve this uses the ``extra-paths`` option of ``buildout``
+section: by setting it to empty value, packages outside of ``eggs``
+or ``develop-eggs`` directories will not be considered when looking
+for already installed eggs. Then the ``bootstrap`` command will
+install ``zc.buildout`` and its dependencies from scratch in ``eggs``.
+
+.. code-block:: console
+
+  buildout buildout:extra-paths= bootstrap
+
+After this, the generated ``bin/buildout`` script will use the packages
+installed in ``eggs`` directory instead of those in the environment and
+preserve the isolation from the environment, even without setting
+``extra-paths``. That is because the default value for ``extra-paths``
+only considers the paths where ``zc.buildout`` and its dependencies are
+found, and in this case that is only the ``eggs`` directory.
+
+
 Installing software
 ===================
 

doc/reference.rst

@@ -358,6 +358,19 @@ extends-cache
   substitutions, and the result is a relative path, then it will be
   interpreted relative to the buildout directory.)
 
+.. _extra-paths-buildout-option
+
+extra-paths, default: 'zc.buildout'
+  Extra paths to scan for already installed distributions.
+
+  Setting this to an empty value enables isolation of buildout.
+  Setting this to 'legacy' enables the legacy behavior of
+  scanning the paths of the distributions of zc.buildout itself
+  and its dependencies, which may contain sites-packages or not.
+  Setting this to 'zc.buildout' also scans the paths of the
+  current zc.buildout and dependencies, but respects the order
+  they appear in sys.path, avoiding unexpected results.
+
 .. _find-links-option:
 
 find-links, default: ''

setup.py

@@ -12,7 +12,7 @@
 #
 ##############################################################################
 name = "zc.buildout"
-version = '3.0.1'
+version = '3.0.1+slapos001'
 
 import os
 from setuptools import setup
@@ -47,7 +47,7 @@ setup(
     python_requires = '>=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, !=3.4.*',
     namespace_packages = ['zc'],
     install_requires = [
-        'setuptools>=8.0',
+        'setuptools>=38.2.3',
         'pip',
         'wheel',
     ],

src/zc/buildout/__init__.py

@@ -49,3 +49,16 @@ class UserError(Exception):
 
     def __str__(self):
         return " ".join(map(str, self.args))
+
+# Used for Python 2-3 compatibility
+if str is bytes: # BBB Py2
+    bytes2str = str2bytes = lambda s: s
+    def unicode2str(s):
+        return s.encode('utf-8')
+else:
+    def bytes2str(s):
+        return s.decode()
+    def str2bytes(s):
+        return s.encode()
+    def unicode2str(s):
+        return s

src/zc/buildout/configparser.py

@@ -113,10 +113,12 @@ section_header  = re.compile(
     r'([#;].*)?$)'
     ).match
 
+option_name_re = r'[^\s{}[\]=:]+'
 option_start = re.compile(
-    r'(?P<name>[^\s{}[\]=:]+\s*[-+]?)'
+    r'(?P<name>%s\s*[-+]?)'
     r'='
-    r'(?P<value>.*)$').match
+    r'(?P<value>.*)$'
+    % option_name_re).match
 
 leading_blank_lines = re.compile(r"^(\s*\n)+")
 
@@ -201,7 +203,12 @@ def parse(fp, fpname, exp_globals=dict):
                         if not context:
                             context = exp_globals()
                         # evaluated expression is in list: get first element
+                        try:
                             section_condition = eval(expr, context)[0]
+                        except NameError as x:
+                            sections.setdefault(sectname, {})[
+                                '__unsupported_conditional_expression__'] = x
+                            continue
                     # finally, ignore section when an expression
                     # evaluates to false
                     if not section_condition:
@@ -255,6 +262,8 @@ def parse(fp, fpname, exp_globals=dict):
         section = sections[sectname]
         for name in section:
             value = section[name]
+            if isinstance(value, NameError):
+                continue
             if value[:1].isspace():
                 section[name] = leading_blank_lines.sub(
                     '', textwrap.dedent(value.rstrip()))

src/zc/buildout/rmtree.py

@@ -16,7 +16,8 @@
 import shutil
 import os
 import doctest
-import time
+import errno
+import sys
 
 def rmtree (path):
     """
@@ -26,6 +27,10 @@ def rmtree (path):
     process (e.g. antivirus scanner). This tries to chmod the
     file to writeable and retries 10 times before giving up.
 
+    Also it tries to remove symlink itself if a symlink as passed as
+    path argument.
+
+    Finally, it tries to make parent directory writable.
     >>> from tempfile import mkdtemp
 
     Let's make a directory ...
@@ -41,10 +46,16 @@ def rmtree (path):
 
     >>> foo = os.path.join (d, 'foo')
     >>> with open (foo, 'w') as f: _ = f.write ('huhu')
+    >>> bar = os.path.join (d, 'bar')
+    >>> os.symlink(bar, bar)
 
     and make it unwriteable
 
-    >>> os.chmod (foo, 256) # 0400
+    >>> os.chmod (foo, 0o400)
+
+    and make parent dir unwritable
+
+    >>> os.chmod (d, 0o400)
 
     rmtree should be able to remove it:
 
@@ -54,21 +65,76 @@ def rmtree (path):
 
     >>> os.path.isdir (d)
     0
+
+    Let's make a directory ...
+
+    >>> d = mkdtemp()
+
+    and make sure it is actually there
+
+    >>> os.path.isdir (d)
+    1
+
+    Now create a broken symlink ...
+
+    >>> foo = os.path.join (d, 'foo')
+    >>> os.symlink(foo + '.not_exist', foo)
+
+    rmtree should be able to remove it:
+
+    >>> rmtree (foo)
+
+    and now the directory is gone
+
+    >>> os.path.isdir (foo)
+    0
+
+    cleanup directory
+
+    >>> rmtree (d)
+
+    and now the directory is gone
+
+    >>> os.path.isdir (d)
+    0
+    """
+    def chmod_retry(func, failed_path, exc_info):
+        """Make sure the directories are executable and writable.
         """
-    def retry_writeable (func, path, exc):
-        os.chmod (path, 384) # 0600
-        for i in range(10):
-            try:
-                func (path)
-                break
-            except OSError:
-                time.sleep(0.1)
+        if func is os.path.islink:
+            os.unlink(path)
+        elif func is os.lstat or func is os.open:
+            if not os.path.islink(path):
+                raise
+            os.unlink(path)
+        else:
+            # Depending on the Python version, the following items differ.
+            if sys.version_info >= (3, ):
+                expected_error_type = PermissionError
+                expected_func_tuple = (os.lstat, os.open)
             else:
-            # tried 10 times without success, thus
-            # finally rethrow the last exception
+                expected_error_type = OSError
+                expected_func_tuple = (os.listdir, )
+            e = exc_info[1]
+            if isinstance(e, expected_error_type):
+                if e.errno == errno.ENOENT:
+                    # because we are calling again rmtree on listdir errors, this path might
+                    # have been already deleted by the recursive call to rmtree.
+                    return
+                if e.errno == errno.EACCES:
+                    if func in expected_func_tuple:
+                        os.chmod(failed_path, 0o700)
+                        # corner case to handle errors in listing directories.
+                        # https://bugs.python.org/issue8523
+                        return shutil.rmtree(failed_path, onerror=chmod_retry)
+                    # If parent directory is not writable, we still cannot delete the file.
+                    # But make sure not to change the parent of the folder we are deleting.
+                    if failed_path != path:
+                        os.chmod(os.path.dirname(failed_path), 0o700)
+                        return func(failed_path)
             raise
 
-    shutil.rmtree (path, onerror = retry_writeable)
+    shutil.rmtree(path, onerror=chmod_retry)
 
 def test_suite():
     return doctest.DocTestSuite()

src/zc/buildout/testing.py

@@ -23,6 +23,7 @@ except ImportError:
     from BaseHTTPServer import HTTPServer, BaseHTTPRequestHandler
     from urllib2        import urlopen
 
+import base64
 import errno
 import logging
 import multiprocessing
@@ -222,6 +223,9 @@ class Buildout(zc.buildout.buildout.Buildout):
 
     Options = TestOptions
 
+    def initialize(self, *args):
+        pass
+
 def buildoutSetUp(test):
 
     test.globs['__tear_downs'] = __tear_downs = []
@@ -412,6 +416,23 @@ class Handler(BaseHTTPRequestHandler):
             self.__server.__log = False
             return k()
 
+        if self.path.startswith('/private/'):
+            auth = self.headers.get('Authorization')
+            if auth and auth.startswith('Basic ') and \
+                self.path[9:].encode() == base64.b64decode(
+                    self.headers.get('Authorization')[6:]):
+                return k()
+            # But not returning 401+WWW-Authenticate, we check that the client
+            # skips auth challenge, which is not free (in terms of performance)
+            # and useless for what we support.
+            self.send_response(403, 'Forbidden')
+            out = '<html><body>Forbidden</body></html>'.encode()
+            self.send_header('Content-Length', str(len(out)))
+            self.send_header('Content-Type', 'text/html')
+            self.end_headers()
+            self.wfile.write(out)
+            return
+
         path = os.path.abspath(os.path.join(self.tree, *self.path.split('/')))
         if not (
             ((path == self.tree) or path.startswith(self.tree+os.path.sep))
@@ -622,6 +643,8 @@ ignore_not_upgrading = (
     'Not upgrading because not running a local buildout command.\n'
     ), '')
 
+os.environ['BUILDOUT_INFO_REINSTALL_REASON'] = '0'
+
 def run_buildout(command):
     # Make sure we don't get .buildout
     os.environ['HOME'] = os.path.join(os.getcwd(), 'home')

src/zc/buildout/tests/__init__.py

@@ -123,6 +123,45 @@ def create_sample_eggs(test, executable=sys.executable):
             )
         zc.buildout.testing.bdist_egg(tmp, sys.executable, dest)
 
+        write(tmp, 'builddep.py', '')
+        write(
+            tmp, 'setup.py',
+            "from setuptools import setup\n"
+            "setup(name='builddep', "
+            " py_modules=['builddep'], "
+            " zip_safe=True, version='0.1')\n"
+            )
+        zc.buildout.testing.sdist(tmp, dest)
+
+        write(tmp, 'withsetuprequires.py', '')
+        write(
+            tmp, 'setup.py',
+            "from setuptools import setup\n"
+            "setup(name='withsetuprequires', "
+            " setup_requires = 'builddep', "
+            " py_modules=['withsetuprequires'], "
+            " zip_safe=True, version='0.1')\n"
+            "import builddep"
+            )
+        zc.buildout.testing.sdist(tmp, dest)
+
+        write(tmp, 'withbuildsystemrequires.py', '')
+        write(tmp, 'pyproject.toml',
+            '[build-system]\n'
+            'requires = ["builddep"]'
+            )
+        write(
+            tmp, 'setup.py',
+            "from setuptools import setup\n"
+            "setup(name='withbuildsystemrequires', "
+            " setup_requires = 'builddep', "
+            " py_modules=['withbuildsystemrequires'], "
+            " package_data={'withbuildsystemrequires': ['pyproject.toml']}, "
+            " zip_safe=True, version='0.1')\n"
+            "import builddep"
+            )
+        zc.buildout.testing.sdist(tmp, dest)
+
     finally:
         shutil.rmtree(tmp)
 

src/zc/buildout/tests/allow-unknown-extras.txt

@@ -40,6 +40,7 @@ Now we can run the buildout and see that it fails:
     ...
     While:
       Installing eggs.
+      Base installation request: 'allowdemo[bad_extra]'
     Error: Couldn't find the required extra...
 
 If we flip the option on, the buildout succeeds

src/zc/buildout/tests/allowhosts.txt

@@ -61,6 +61,8 @@ Now we can run the buildout and make sure all attempts to dist.plone.org fails::
     ...
     While:
       Installing eggs.
+      Base installation request: 'allowdemo'
+        Requirement of allowdemo: kss.core
       Getting distribution for 'kss.core'.
     Error: Couldn't find a distribution for 'kss.core'.
 
@@ -92,6 +94,8 @@ Now we can run the buildout and make sure all attempts to dist.plone.org fails::
     ...
     While:
       Installing eggs.
+      Base installation request: 'allowdemo'
+        Requirement of allowdemo: kss.core
       Getting distribution for 'kss.core'.
     Error: Couldn't find a distribution for 'kss.core'.
 

src/zc/buildout/tests/buildout.txt

@@ -337,6 +337,10 @@ we'll see that the directory gets removed and recreated::
     ... path = mydata
     ... """)
 
+    >>> print_(system(buildout+' --dry-run'), end='')
+    Develop: '/sample-buildout/recipes'
+    Uninstalling data-dir.
+    Installing data-dir.
     >>> print_(system(buildout), end='')
     Develop: '/sample-buildout/recipes'
     Uninstalling data-dir.
@@ -357,6 +361,10 @@ If any of the files or directories created by a recipe are removed,
 the part will be reinstalled::
 
     >>> rmdir(sample_buildout, 'mydata')
+    >>> print_(system(buildout+' --dry-run'), end='')
+    Develop: '/sample-buildout/recipes'
+    Uninstalling data-dir.
+    Installing data-dir.
     >>> print_(system(buildout), end='')
     Develop: '/sample-buildout/recipes'
     Uninstalling data-dir.
@@ -816,6 +824,8 @@ the origin of the value (file name or ``COMPUTED_VALUE``, ``DEFAULT_VALUE``,
         DEFAULT_VALUE
     directory= /sample-buildout
         COMPUTED_VALUE
+    dry-run= false
+        DEFAULT_VALUE
     eggs-directory= /sample-buildout/eggs
         DEFAULT_VALUE
     executable= ...
@@ -911,6 +921,11 @@ You get more information about the way values are computed::
        AS COMPUTED_VALUE
        SET VALUE = /sample-buildout
     <BLANKLINE>
+    dry-run= false
+    <BLANKLINE>
+       AS DEFAULT_VALUE
+       SET VALUE = false
+    <BLANKLINE>
     eggs-directory= /sample-buildout/eggs
     <BLANKLINE>
        AS DEFAULT_VALUE
@@ -1269,6 +1284,102 @@ the current section.  We can also use the special option,
     my_name debug
     recipe recipes:debug
 
+It is possible to have access to profile base url from section by
+using ${:_profile_base_location_}:
+
+    >>> write(sample_buildout, 'buildout.cfg',
+    ... """
+    ... [buildout]
+    ... develop = recipes
+    ... parts = data-dir debug
+    ... log-level = INFO
+    ...
+    ... [debug]
+    ... recipe = recipes:debug
+    ... profile_base_location = ${:_profile_base_location_}
+    ...
+    ... [data-dir]
+    ... recipe = recipes:mkdir
+    ... path = mydata
+    ... """)
+
+    >>> print_(system(buildout), end='')
+    Develop: '/sample-buildout/recipes'
+    Uninstalling debug.
+    Updating data-dir.
+    Installing debug.
+    _profile_base_location_ /sample-buildout
+    profile_base_location /sample-buildout
+    recipe recipes:debug
+
+Keep in mind that in case of sections spaning across multiple profiles,
+the topmost value will be presented:
+
+    >>> write(sample_buildout, 'extended.cfg',
+    ... """
+    ... [debug]
+    ... profile_base_location = ${:_profile_base_location_}
+    ... """)
+
+    >>> write(sample_buildout, 'buildout.cfg',
+    ... """
+    ... [buildout]
+    ... extends = extended.cfg
+    ... develop = recipes
+    ... parts = data-dir debug
+    ... log-level = INFO
+    ...
+    ... [debug]
+    ... recipe = recipes:debug
+    ... profile_base_location = ${:_profile_base_location_}
+    ...
+    ... [data-dir]
+    ... recipe = recipes:mkdir
+    ... path = mydata
+    ... """)
+
+    >>> print_(system(buildout), end='')
+    Develop: '/sample-buildout/recipes'
+    Updating data-dir.
+    Updating debug.
+    _profile_base_location_ /sample-buildout
+    profile_base_location /sample-buildout
+    recipe recipes:debug
+
+But of course, in case if accessing happens in extended profile's section,
+this profile's location will be exposed:
+
+    >>> write(sample_buildout, 'extended.cfg',
+    ... """
+    ... [debug]
+    ... profile_base_location = ${:_profile_base_location_}
+    ... """)
+
+    >>> write(sample_buildout, 'buildout.cfg',
+    ... """
+    ... [buildout]
+    ... extends = extended.cfg
+    ... develop = recipes
+    ... parts = data-dir debug
+    ... log-level = INFO
+    ...
+    ... [debug]
+    ... recipe = recipes:debug
+    ...
+    ... [data-dir]
+    ... recipe = recipes:mkdir
+    ... path = mydata
+    ... """)
+
+    >>> print_(system(buildout), end='')
+    Develop: '/sample-buildout/recipes'
+    Updating data-dir.
+    Updating debug.
+    _profile_base_location_ /sample-buildout
+    profile_base_location /sample-buildout
+    recipe recipes:debug
+    >>> remove(sample_buildout, 'extended.cfg')
+
 Automatic part selection and ordering
 -------------------------------------
 
@@ -2700,7 +2811,7 @@ were created.
 The ``.installed.cfg`` is only updated for the recipes that ran::
 
     >>> cat(sample_buildout, '.installed.cfg')
-    ... # doctest: +NORMALIZE_WHITESPACE
+    ... # doctest: +NORMALIZE_WHITESPACE +ELLIPSIS
     [buildout]
     installed_develop_eggs = /sample-buildout/develop-eggs/recipes.egg-link
     parts = debug d1 d2 d3 d4
@@ -2730,7 +2841,7 @@ The ``.installed.cfg`` is only updated for the recipes that ran::
     <BLANKLINE>
     [d4]
     __buildout_installed__ = /sample-buildout/data2-extra
-    __buildout_signature__ = recipes-PiIFiO8ny5yNZ1S3JfT0xg==
+    __buildout_signature__ = recipes-PiIFiO8ny5yNZ1S3JfT0xg== d2:...
     path = /sample-buildout/data2-extra
     recipe = recipes:mkdir
 
@@ -2804,10 +2915,10 @@ provide alternate locations, and even names for these directories::
     Creating directory '/sample-alt/work'.
     Creating directory '/sample-alt/developbasket'.
     Develop: '/sample-buildout/recipes'
-    Uninstalling d4.
-    Uninstalling d3.
     Uninstalling d2.
     Uninstalling debug.
+    Uninstalling d4.
+    Uninstalling d3.
 
     >>> ls(alt)
     d  basket
@@ -2915,8 +3026,10 @@ database is shown::
     bin-directory = /sample-buildout/bin
     develop-eggs-directory = /sample-buildout/develop-eggs
     directory = /sample-buildout
+    dry-run = false
     eggs-directory = /sample-buildout/eggs
     executable = python
+    extra-paths = ...
     find-links =
     install-from-cache = false
     installed = /sample-buildout/.installed.cfg
@@ -3234,7 +3347,6 @@ or paths to use::
     >>> remove('setup.cfg')
     >>> print_(system(buildout + ' -csetup.cfg init demo other ./src'), end='')
     Creating '/sample-bootstrapped/setup.cfg'.
-    Creating directory '/sample-bootstrapped/develop-eggs'.
     Getting distribution for 'zc.recipe.egg>=2.0.6'.
     Got zc.recipe.egg
     Installing py.
@@ -3293,7 +3405,6 @@ for us::
     >>> remove('setup.cfg')
     >>> print_(system(buildout + ' -csetup.cfg init demo other ./src'), end='')
     Creating '/sample-bootstrapped/setup.cfg'.
-    Creating directory '/sample-bootstrapped/develop-eggs'.
     Installing py.
     Generated script '/sample-bootstrapped/bin/demo'.
     Generated script '/sample-bootstrapped/bin/distutilsscript'.

src/zc/buildout/tests/dependencylinks.txt

@@ -87,6 +87,8 @@ buildout to see where the egg comes from this time.
     ...
     While:
       Updating eggs.
+      Base installation request: 'depdemo'
+        Requirement of depdemo: demoneeded
       Getting distribution for 'demoneeded'.
     Error: Couldn't find a distribution for 'demoneeded'.
 

src/zc/buildout/tests/download.txt

@@ -63,6 +63,32 @@ When trying to access a file that doesn't exist, we'll get an exception:
 ... else: print_('woops')
 download error
 
+An alternate URL can be used in case of HTTPError with the main one.
+Useful when a version of a resource can only be downloaded with a temporary
+URL as long as it's the last version, and this version is then moved to a
+permanent place when a newer version is released. In such case, when using
+a cache (in particular networkcache), it's important that the main URL (`url`)
+is always used as cache key. And `alternate_url` shall be the temporary URL.
+
+>>> path, is_temp = download(server_url+'not-there',
+...                          alternate_url=server_url+'foo.txt')
+>>> cat(path)
+This is a foo text.
+>>> is_temp
+True
+>>> remove(path)
+
+The main URL is tried first:
+
+>>> write(server_data, 'other.txt', 'This is some other text.')
+>>> path, is_temp = download(server_url+'other.txt',
+...                          alternate_url=server_url+'foo.txt')
+>>> cat(path)
+This is some other text.
+>>> is_temp
+True
+>>> remove(path)
+
 Downloading a local file doesn't produce a temporary file but simply returns
 the local file itself:
 
@@ -126,6 +152,37 @@ This is a foo text.
 
 >>> remove(path)
 
+HTTP basic authentication:
+
+>>> download = Download()
+>>> user_url = server_url.replace('/localhost:', '/%s@localhost:') + 'private/'
+>>> path, is_temp = download(user_url % 'foo:' + 'foo:')
+>>> is_temp; remove(path)
+True
+>>> path, is_temp = download(user_url % 'foo:bar' + 'foo:bar')
+>>> is_temp; remove(path)
+True
+>>> download(user_url % 'bar:' + 'foo:')
+Traceback (most recent call last):
+UserError: Error downloading ...: HTTP Error 403: Forbidden
+
+... with netrc:
+
+>>> url = server_url + 'private/foo:bar'
+>>> download(url)
+Traceback (most recent call last):
+UserError: Error downloading ...: HTTP Error 403: Forbidden
+>>> import os, zc.buildout.download
+>>> old_home = os.environ['HOME']
+>>> home = os.environ['HOME'] = tmpdir('test-netrc')
+>>> netrc = join(home, '.netrc')
+>>> write(netrc, 'machine localhost login foo password bar')
+>>> os.chmod(netrc, 0o600)
+>>> zc.buildout.download.netrc.__init__()
+>>> path, is_temp = download(url)
+>>> is_temp; remove(path)
+True
+>>> os.environ['HOME'] = old_home
 
 Downloading using the download cache
 ------------------------------------
@@ -165,14 +222,6 @@ the file on the server to see this:
 >>> cat(path)
 This is a foo text.
 
-If we specify an MD5 checksum for a file that is already in the cache, the
-cached copy's checksum will be verified:
-
->>> download(server_url+'foo.txt', md5('The wrong text.'.encode()).hexdigest())
-Traceback (most recent call last):
-ChecksumError: MD5 checksum mismatch for cached download
-               from 'http://localhost/foo.txt' at '/download-cache/foo.txt'
-
 Trying to access another file at a different URL which has the same base name
 will result in the cached copy being used:
 
@@ -184,6 +233,14 @@ will result in the cached copy being used:
 >>> cat(path)
 This is a foo text.
 
+If we specify an MD5 checksum for a file that is already in the cache, the
+cached copy's checksum will be verified and the cache will be refreshed:
+
+>>> path, is_temp = download(server_url+'foo.txt', md5('The wrong text.'.encode()).hexdigest())
+>>> is_temp
+True
+>>> remove(path)
+
 Given a target path for the download, the utility will provide a copy of the
 file at that location both when first downloading the file and when using a
 cached copy:
@@ -259,7 +316,7 @@ If the file is completely missing it should notify the user of the error:
 >>> download(server_url+'bar.txt') # doctest: +NORMALIZE_WHITESPACE +ELLIPSIS
 Traceback (most recent call last):
 ...
-UserError: Error downloading extends for URL http://localhost/bar.txt:
+UserError: Error downloading http://localhost/bar.txt:
 ...404...
 >>> ls(cache)
 
@@ -442,18 +499,22 @@ However, when downloading the file normally with the cache being used in
 fall-back mode, the file will be downloaded from the net and the cached copy
 will be replaced with the new content:
 
->>> cat(download(server_url+'foo.txt')[0])
+>>> path, is_temp = download(server_url+'foo.txt')
+>>> cat(path)
 The wrong text.
 >>> cat(cache, 'foo.txt')
 The wrong text.
+>>> is_temp
+True
+>>> remove(path)
 
-When trying to download a resource whose checksum does not match, the cached
-copy will neither be used nor overwritten:
+Fall-back mode is meaningless if md5sum is given. If the checksum of the
+cached copy matches, the resource is not downloaded:
 
 >>> write(server_data, 'foo.txt', 'This is a foo text.')
->>> download(server_url+'foo.txt', md5('The wrong text.'.encode()).hexdigest())
-Traceback (most recent call last):
-ChecksumError: MD5 checksum mismatch downloading 'http://localhost/foo.txt'
+>>> path, is_temp = download(server_url+'foo.txt', md5('The wrong text.'.encode()).hexdigest())
+>>> print_(path)
+/download-cache/foo.txt
 >>> cat(cache, 'foo.txt')
 The wrong text.
 

src/zc/buildout/tests/downloadcache.txt

@@ -33,11 +33,12 @@ download:
 
     >>> print_(get(link_server), end='')
     <html><body>
-    <a href="bigdemo-0.1-py2.4.egg">bigdemo-0.1-py2.4.egg</a><br>
-    <a href="demo-0.1-py2.4.egg">demo-0.1-py2.4.egg</a><br>
-    <a href="demo-0.2-py2.4.egg">demo-0.2-py2.4.egg</a><br>
-    <a href="demo-0.3-py2.4.egg">demo-0.3-py2.4.egg</a><br>
-    <a href="demo-0.4rc1-py2.4.egg">demo-0.4rc1-py2.4.egg</a><br>
+    <a href="bigdemo-0.1-pyN.N.egg">bigdemo-0.1-pyN.N.egg</a><br>
+    <a href="builddep-0.1.zip">builddep-0.1.zip</a><br>
+    <a href="demo-0.1-pyN.N.egg">demo-0.1-pyN.N.egg</a><br>
+    <a href="demo-0.2-pyN.N.egg">demo-0.2-pyN.N.egg</a><br>
+    <a href="demo-0.3-pyN.N.egg">demo-0.3-pyN.N.egg</a><br>
+    <a href="demo-0.4rc1-pyN.N.egg">demo-0.4rc1-pyN.N.egg</a><br>
     <a href="demoneeded-1.0.zip">demoneeded-1.0.zip</a><br>
     <a href="demoneeded-1.1.zip">demoneeded-1.1.zip</a><br>
     <a href="demoneeded-1.2rc1.zip">demoneeded-1.2rc1.zip</a><br>
@@ -45,7 +46,9 @@ download:
     <a href="extdemo-1.4.zip">extdemo-1.4.zip</a><br>
     <a href="index/">index/</a><br>
     <a href="mixedcase-0.5.zip">mixedcase-0.5.zip</a><br>
-    <a href="other-1.0-py2.4.egg">other-1.0-py2.4.egg</a><br>
+    <a href="other-1.0-pyN.N.egg">other-1.0-pyN.N.egg</a><br>
+    <a href="withbuildsystemrequires-0.1.zip">withbuildsystemrequires-0.1.zip</a><br>
+    <a href="withsetuprequires-0.1.zip">withsetuprequires-0.1.zip</a><br>
     </body></html>
 
 

src/zc/buildout/tests/easy_install.txt

@@ -97,11 +97,12 @@ We have a link server that has a number of eggs:
 
     >>> print_(get(link_server), end='')
     <html><body>
-    <a href="bigdemo-0.1-py2.4.egg">bigdemo-0.1-py2.4.egg</a><br>
-    <a href="demo-0.1-py2.4.egg">demo-0.1-py2.4.egg</a><br>
-    <a href="demo-0.2-py2.4.egg">demo-0.2-py2.4.egg</a><br>
-    <a href="demo-0.3-py2.4.egg">demo-0.3-py2.4.egg</a><br>
-    <a href="demo-0.4rc1-py2.4.egg">demo-0.4rc1-py2.4.egg</a><br>
+    <a href="bigdemo-0.1-pyN.N.egg">bigdemo-0.1-pyN.N.egg</a><br>
+    <a href="builddep-0.1.zip">builddep-0.1.zip</a><br>
+    <a href="demo-0.1-pyN.N.egg">demo-0.1-pyN.N.egg</a><br>
+    <a href="demo-0.2-pyN.N.egg">demo-0.2-pyN.N.egg</a><br>
+    <a href="demo-0.3-pyN.N.egg">demo-0.3-pyN.N.egg</a><br>
+    <a href="demo-0.4rc1-pyN.N.egg">demo-0.4rc1-pyN.N.egg</a><br>
     <a href="demoneeded-1.0.zip">demoneeded-1.0.zip</a><br>
     <a href="demoneeded-1.1.zip">demoneeded-1.1.zip</a><br>
     <a href="demoneeded-1.2rc1.zip">demoneeded-1.2rc1.zip</a><br>
@@ -109,7 +110,9 @@ We have a link server that has a number of eggs:
     <a href="extdemo-1.4.zip">extdemo-1.4.zip</a><br>
     <a href="index/">index/</a><br>
     <a href="mixedcase-0.5.zip">mixedcase-0.5.zip</a><br>
-    <a href="other-1.0-py2.4.egg">other-1.0-py2.4.egg</a><br>
+    <a href="other-1.0-pyN.N.egg">other-1.0-pyN.N.egg</a><br>
+    <a href="withbuildsystemrequires-0.1.zip">withbuildsystemrequires-0.1.zip</a><br>
+    <a href="withsetuprequires-0.1.zip">withsetuprequires-0.1.zip</a><br>
     </body></html>
 
 Let's make a directory and install the demo egg to it, using the demo:
@@ -765,9 +768,9 @@ An interpreter can also be generated without other eggs:
     <BLANKLINE>
     import sys
     <BLANKLINE>
-    sys.path[0:0] = [
     <BLANKLINE>
-      ]
+    <BLANKLINE>
+    _interactive = True
     ...
 
 An additional argument can be passed to define which scripts to install
@@ -1233,11 +1236,12 @@ Let's update our link server with a new version of extdemo:
     >>> update_extdemo()
     >>> print_(get(link_server), end='')
     <html><body>
-    <a href="bigdemo-0.1-py2.4.egg">bigdemo-0.1-py2.4.egg</a><br>
-    <a href="demo-0.1-py2.4.egg">demo-0.1-py2.4.egg</a><br>
-    <a href="demo-0.2-py2.4.egg">demo-0.2-py2.4.egg</a><br>
-    <a href="demo-0.3-py2.4.egg">demo-0.3-py2.4.egg</a><br>
-    <a href="demo-0.4rc1-py2.4.egg">demo-0.4rc1-py2.4.egg</a><br>
+    <a href="bigdemo-0.1-pyN.N.egg">bigdemo-0.1-pyN.N.egg</a><br>
+    <a href="builddep-0.1.zip">builddep-0.1.zip</a><br>
+    <a href="demo-0.1-pyN.N.egg">demo-0.1-pyN.N.egg</a><br>
+    <a href="demo-0.2-pyN.N.egg">demo-0.2-pyN.N.egg</a><br>
+    <a href="demo-0.3-pyN.N.egg">demo-0.3-pyN.N.egg</a><br>
+    <a href="demo-0.4rc1-pyN.N.egg">demo-0.4rc1-pyN.N.egg</a><br>
     <a href="demoneeded-1.0.zip">demoneeded-1.0.zip</a><br>
     <a href="demoneeded-1.1.zip">demoneeded-1.1.zip</a><br>
     <a href="demoneeded-1.2rc1.zip">demoneeded-1.2rc1.zip</a><br>
@@ -1246,7 +1250,9 @@ Let's update our link server with a new version of extdemo:
     <a href="extdemo-1.5.zip">extdemo-1.5.zip</a><br>
     <a href="index/">index/</a><br>
     <a href="mixedcase-0.5.zip">mixedcase-0.5.zip</a><br>
-    <a href="other-1.0-py2.4.egg">other-1.0-py2.4.egg</a><br>
+    <a href="other-1.0-pyN.N.egg">other-1.0-pyN.N.egg</a><br>
+    <a href="withbuildsystemrequires-0.1.zip">withbuildsystemrequires-0.1.zip</a><br>
+    <a href="withsetuprequires-0.1.zip">withsetuprequires-0.1.zip</a><br>
     </body></html>
 
 The easy_install caches information about servers to reduce network
@@ -1445,9 +1451,8 @@ Now when we install the distributions:
     ...     ['demo==0.2'], dest,
     ...     links=[link_server], index=link_server+'index/')
     GET 200 /
-    GET 404 /index/demo/
-    GET 200 /index/
     GET 404 /index/demoneeded/
+    GET 200 /index/
 
     >>> zc.buildout.easy_install.build(
     ...   'extdemo', dest,
@@ -1469,6 +1474,7 @@ from the link server:
     >>> ws = zc.buildout.easy_install.install(
     ...     ['demo'], dest,
     ...     links=[link_server], index=link_server+'index/')
+    GET 404 /index/demo/
     GET 200 /demo-0.3-py2.4.egg
 
 Normally, the download cache is the preferred source of downloads, but

src/zc/buildout/tests/extends-cache.txt → src/zc/buildout/tests/extends-cache.txt.disabled

@@ -492,9 +492,9 @@ a better solution would re-use the logging already done by the utility.)
 
 >>> import zc.buildout
 >>> old_download = zc.buildout.download.Download.download
->>> def wrapper_download(self, url, md5sum=None, path=None):
+>>> def wrapper_download(self, url, *args, **kw):
 ...   print_("The URL %s was downloaded." % url)
-...   return old_download(url, md5sum, path)
+...   return old_download(url, *args, **kw)
 >>> zc.buildout.download.Download.download = wrapper_download
 
 >>> zc.buildout.buildout.main([])

src/zc/buildout/tests/repeatable.txt

@@ -207,6 +207,7 @@ versions:
       Getting section foo.
       Initializing section foo.
       Installing recipe spam.
+      Base installation request: 'spam'
       Getting distribution for 'spam'.
     Error: Picked: spam = 2
     ...

zc.recipe.egg_/setup.py

@@ -14,7 +14,7 @@
 """Setup for zc.recipe.egg package
 """
 
-version = '2.0.8.dev0'
+version = '2.0.8.dev0+slapos001'
 
 import os
 from setuptools import setup, find_packages

zc.recipe.egg_/src/zc/recipe/egg/README.rst

@@ -9,6 +9,19 @@ eggs
     requirement strings.  Each string must be given on a separate
     line.
 
+patch-binary
+   The path to the patch executable.
+
+EGGNAME-patches
+   A new-line separated list of patchs to apply when building.
+
+EGGNAME-patch-options
+   Options to give to the patch program when applying patches.
+
+EGGNAME-patch-revision
+   An integer to specify the revision (default is the number of
+   patches).
+
 find-links
    A list of URLs, files, or directories to search for distributions.
 

zc.recipe.egg_/src/zc/recipe/egg/api.rst

@@ -97,14 +97,14 @@ of extra requirements to be included in the working set.
 We can see that the options were augmented with additional data
 computed by the egg recipe by looking at .installed.cfg:
 
-    >>> cat(sample_buildout, '.installed.cfg')
+    >>> cat(sample_buildout, '.installed.cfg') # doctest: +ELLIPSIS
     [buildout]
     installed_develop_eggs = /sample-buildout/develop-eggs/sample.egg-link
     parts = sample-part
     <BLANKLINE>
     [sample-part]
     __buildout_installed__ = 
-    __buildout_signature__ = ...
+    __buildout_signature__ = sample-... setuptools-... zc.buildout-... zc.recipe.egg-...
     _b = /sample-buildout/bin
     _d = /sample-buildout/develop-eggs
     _e = /sample-buildout/eggs

zc.recipe.egg_/src/zc/recipe/egg/custom.py

@@ -15,6 +15,7 @@
 """
 import logging
 import os
+import re
 import sys
 
 import zc.buildout.easy_install
@@ -28,17 +29,19 @@ class Base:
         self.name, self.options = name, options
 
         options['_d'] = buildout['buildout']['develop-eggs-directory']
-
-        self.build_ext = build_ext(buildout, options)
-
-    def update(self):
-        return self.install()
+        options['_e'] = buildout['buildout']['eggs-directory']
 
 
-class Custom(Base):
+        environment_section = options.get('environment')
+        if environment_section:
+            self.environment = buildout[environment_section]
+        else:
+            self.environment = {}
+        environment_data = list(self.environment.items())
+        environment_data.sort()
+        options['_environment-data'] = repr(environment_data)
 
-    def __init__(self, buildout, name, options):
-        Base.__init__(self, buildout, name, options)
+        self.build_ext = build_ext(buildout, options)
 
         links = options.get('find-links',
                             buildout['buildout'].get('find-links'))
@@ -54,45 +57,20 @@ class Custom(Base):
             options['index'] = index
         self.index = index
 
-        environment_section = options.get('environment')
-        if environment_section:
-            self.environment = buildout[environment_section]
-        else:
-            self.environment = {}
-        environment_data = list(self.environment.items())
-        environment_data.sort()
-        options['_environment-data'] = repr(environment_data)
-
-        options['_e'] = buildout['buildout']['eggs-directory']
-
-        if buildout['buildout'].get('offline') == 'true':
-            self.install = lambda: ()
-
         self.newest = buildout['buildout'].get('newest') == 'true'
 
-    def install(self):
-        options = self.options
-        distribution = options.get('egg')
-        if distribution is None:
-            distribution = options.get('eggs')
-            if distribution is None:
-                distribution = self.name
-            else:
-                logger.warn("The eggs option is deprecated. Use egg instead")
 
 
-        distribution = options.get('egg', options.get('eggs', self.name)
-                                   ).strip()
+    def install(self):
         self._set_environment()
         try:
-            return zc.buildout.easy_install.build(
-                distribution, options['_d'], self.build_ext,
-                self.links, self.index, sys.executable,
-                [options['_e']], newest=self.newest,
-                )
+            self._install_setup_eggs()
+            return self._install()
         finally:
             self._restore_environment()
 
+    def update(self):
+        return self.install()
 
     def _set_environment(self):
         self._saved_environment = {}
@@ -114,6 +92,78 @@ class Custom(Base):
                 except KeyError:
                     pass
 
+    def _install_setup_eggs(self):
+        options = self.options
+        setup_eggs = [
+            r.strip()
+            for r in options.get('setup-eggs', '').split('\n')
+            if r.strip()]
+        if setup_eggs:
+            ws = zc.buildout.easy_install.install(
+                setup_eggs, options['_e'],
+                links=self.links,
+                index=self.index,
+                executable=sys.executable,
+                path=[options['_d'], options['_e']],
+                newest=self.newest,
+                )
+            extra_path = os.pathsep.join(ws.entries)
+            self.environment['PYTHONEXTRAPATH'] = os.environ['PYTHONEXTRAPATH'] = extra_path
+
+    def _get_patch_dict(self, options, distribution):
+        patch_dict = {}
+        global_patch_binary = options.get('patch-binary', 'patch')
+        def get_option(egg, key, default):
+            return options.get('%s-%s' % (egg, key),
+                               options.get(key, default))
+        egg = re.sub('[<>=].*', '', distribution)
+        patches = filter(lambda x:x,
+                         map(lambda x:x.strip(),
+                             get_option(egg, 'patches', '').splitlines()))
+        patches = list(patches)
+        if not patches:
+            return patch_dict
+        patch_options = get_option(egg, 'patch-options', '-p0').split()
+        patch_binary = get_option(egg, 'patch-binary', global_patch_binary)
+        patch_revision = int(get_option(egg, 'patch-revision', len(patches)))
+        patch_dict[egg] = {
+          'patches':patches,
+          'patch_options':patch_options,
+          'patch_binary':patch_binary,
+          'patch_revision':patch_revision,
+        }
+        return patch_dict
+
+
+class Custom(Base):
+
+    def __init__(self, buildout, name, options):
+        Base.__init__(self, buildout, name, options)
+
+        if buildout['buildout'].get('offline') == 'true':
+            self._install = lambda: ()
+
+    def _install(self):
+        options = self.options
+        distribution = options.get('egg')
+        if distribution is None:
+            distribution = options.get('eggs')
+            if distribution is None:
+                distribution = self.name
+            else:
+                logger.warn("The eggs option is deprecated. Use egg instead")
+
+
+        distribution = options.get('egg', options.get('eggs', self.name)
+                                   ).strip()
+
+        patch_dict = self._get_patch_dict(options, distribution)
+        return zc.buildout.easy_install.build(
+            distribution, options['_d'], self.build_ext,
+            self.links, self.index, sys.executable,
+            [options['_e']], newest=self.newest, patch_dict=patch_dict,
+            )
+
 
 class Develop(Base):
 
@@ -122,7 +172,7 @@ class Develop(Base):
         options['setup'] = os.path.join(buildout['buildout']['directory'],
                                         options['setup'])
 
-    def install(self):
+    def _install(self):
         options = self.options
         return zc.buildout.easy_install.develop(
             options['setup'], options['_d'], self.build_ext)

zc.recipe.egg_/src/zc/recipe/egg/custom.rst

@@ -20,6 +20,23 @@ rpath
    A new-line separated list of directories to search for dynamic libraries
    at run time.
 
+setup-eggs
+   A new-line separated list of eggs that need to be installed
+   beforehand. It is useful to meet the `setup_requires` requirement.
+
+patch-binary
+   The path to the patch executable.
+
+patches
+   A new-line separated list of patchs to apply when building.
+
+patch-options
+   Options to give to the patch program when applying patches.
+
+patch-revision
+   An integer to specify the revision (default is the number of
+   patches).
+
 define
    A comma-separated list of names of C preprocessor variables to
    define.
@@ -434,8 +451,8 @@ Create a clean buildout.cfg w/o the checkenv recipe, and delete the recipe:
     ... """ % dict(server=link_server))
     >>> print_(system(buildout), end='') # doctest: +ELLIPSIS
     Develop: '/sample-buildout/recipes'
-    Uninstalling checkenv.
     Uninstalling extdemo.
+    Uninstalling checkenv.
     Installing extdemo...
 
     >>> rmdir(sample_buildout, 'recipes')
@@ -463,6 +480,10 @@ rpath
    A new-line separated list of directories to search for dynamic libraries
    at run time.
 
+setup-eggs
+   A new-line separated list of eggs that need to be installed
+   beforehand. It is useful to meet the `setup_requires` requirement.
+
 define
    A comma-separated list of names of C preprocessor variables to
    define.
@@ -499,6 +520,10 @@ swig-cpp
 swig-opts
    List of SWIG command line options
 
+environment
+   The name of a section with additional environment variables. The
+   environment variables are set before the egg is built.
+
 To illustrate this, we'll use a directory containing the extdemo
 example from the earlier section:
 

zc.recipe.egg_/src/zc/recipe/egg/egg.py

@@ -51,11 +51,44 @@ class Eggs(object):
                             if host.strip() != ''])
         self.allow_hosts = allow_hosts
 
+        self.buildout_dir = b_options['directory']
         options['eggs-directory'] = b_options['eggs-directory']
         options['_e'] = options['eggs-directory']  # backward compat.
         options['develop-eggs-directory'] = b_options['develop-eggs-directory']
         options['_d'] = options['develop-eggs-directory']  # backward compat.
 
+    def _get_patch_dict(self, options, egg=None):
+        patch_dict = {}
+        global_patch_binary = options.get('patch-binary', 'patch')
+        if egg:
+            egg = re.sub('[<>=].*', '', egg)
+            egg_list = [egg]
+        else:
+            egg_list = [x[:-8] for x in options.keys() if x.endswith('-patches')]
+        def get_option(egg, key, default):
+            if len(egg_list) == 1:
+                return options.get('%s-%s' % (egg, key),
+                                   options.get(key, default))
+            else:
+                return options.get('%s-%s' % (egg, key), default)
+        for egg in egg_list:
+            patches = filter(lambda x:x,
+                             map(lambda x:x.strip(),
+                                 get_option(egg, 'patches', '').splitlines()))
+            patches = list(patches)
+            if not patches:
+                continue
+            patch_options = get_option(egg, 'patch-options', '-p0').split()
+            patch_binary = get_option(egg, 'patch-binary', global_patch_binary)
+            patch_revision = int(get_option(egg, 'patch-revision', len(patches)))
+            patch_dict[egg] = {
+              'patches':patches,
+              'patch_options':patch_options,
+              'patch_binary':patch_binary,
+              'patch_revision':patch_revision,
+            }
+        return patch_dict
+
     def working_set(self, extra=()):
         """Separate method to just get the working set
 
@@ -77,6 +110,7 @@ class Eggs(object):
             distributions=orig_distributions + list(extra),
             develop_eggs_dir=options['develop-eggs-directory'],
             eggs_dir=options['eggs-directory'],
+            buildout_dir=self.buildout_dir,
             offline=(buildout_section.get('offline') == 'true'),
             newest=(buildout_section.get('newest') == 'true'),
             links=self.links,
@@ -98,6 +132,7 @@ class Eggs(object):
         distributions,
         eggs_dir,
         develop_eggs_dir,
+        buildout_dir,
         offline=False,
         newest=True,
         links=(),
@@ -131,6 +166,7 @@ class Eggs(object):
                     [develop_eggs_dir, eggs_dir]
                     )
             else:
+                patch_dict = self._get_patch_dict(self.options)
                 ws = zc.buildout.easy_install.install(
                     distributions, eggs_dir,
                     links=links,
@@ -138,9 +174,10 @@ class Eggs(object):
                     path=[develop_eggs_dir],
                     newest=newest,
                     allow_hosts=allow_hosts,
-                    allow_unknown_extras=allow_unknown_extras)
+                    allow_unknown_extras=allow_unknown_extras,
+                    patch_dict=patch_dict)
             ws = zc.buildout.easy_install.sort_working_set(
-                ws, eggs_dir, develop_eggs_dir
+                ws, buildout_dir, eggs_dir, develop_eggs_dir
                 )
             cache_storage[cache_key] = ws
 

zc.recipe.egg_/src/zc/recipe/egg/patches.rst

+
+Patching eggs before installation
+---------------------------------
+
+The SlapOS extensions of ``zc.recipe.egg`` supports applying patches before installing eggs.
+
+The syntax is to use a version with the magic string ``SlapOSPatched`` plus the number of
+patches to apply.
+
+
+Let's use a patch for demoneeded egg:
+
+    >>> write(sample_buildout, 'demoneeded.patch',
+    ... r"""diff -ru before/demoneeded-1.1/eggrecipedemoneeded.py after/demoneeded-1.1/eggrecipedemoneeded.py
+    ... --- before/demoneeded-1.1/eggrecipedemoneeded.py 2020-09-08 09:27:36.000000000 +0200
+    ... +++ after/demoneeded-1.1/eggrecipedemoneeded.py 2020-09-08 09:46:16.482243822 +0200
+    ... @@ -1,3 +1,3 @@
+    ... -y=1
+    ... +y="patched demoneeded"
+    ...  def f():
+    ...    pass
+    ... \ No newline at end of file
+    ... """)
+
+First, we install demoneeded directly:
+
+    >>> write(sample_buildout, 'buildout.cfg',
+    ... """
+    ... [buildout]
+    ... parts = demoneeded
+    ...
+    ... [demoneeded]
+    ... recipe = zc.recipe.egg:eggs
+    ... eggs = demoneeded
+    ... find-links = %(server)s
+    ... index = %(server)s/index
+    ... demoneeded-patches =
+    ...   ./demoneeded.patch#4b8ad56711dd0d898a2b7957e9604079
+    ... demoneeded-patch-options = -p2
+    ...
+    ... [versions]
+    ... demoneeded = 1.1+SlapOSPatched001
+    ... """ % dict(server=link_server))
+
+When running buildout, we have a warning that a different version is installed, but that's not fatal.
+
+    >>> print_(system(buildout), end='')
+    Installing demoneeded.
+    patching file eggrecipedemoneeded.py
+    Installing demoneeded 1.1
+    Caused installation of a distribution:
+    demoneeded 1.1+slapospatched001
+    with a different version.
+
+The installed egg has the slapospatched001 marker
+
+    >>> ls(sample_buildout, 'eggs')
+    d  demoneeded-1.1+slapospatched001-pyN.N.egg
+    -  setuptools-0.7-py2.3.egg
+    d  zc.buildout-1.0-py2.3.egg
+
+The code of the egg has been patched:
+
+    >>> import glob
+    >>> import os.path
+    >>> cat(glob.glob(os.path.join(sample_buildout, 'eggs', 'demoneeded-1.1+slapospatched001*', 'eggrecipedemoneeded.py'))[0])
+    y="patched demoneeded"
+    def f():
+      pass
+
+Reset the state and also remove the installed egg
+
+    >>> remove('.installed.cfg')
+    >>> rmdir(glob.glob(os.path.join(sample_buildout, 'eggs', 'demoneeded-1.1+slapospatched001*'))[0])
+
+
+In the previous example we applied patches to an egg installed directly, but
+the same technique can be used to apply patches on eggs installed as dependencies.
+
+In this example we install demo and apply a patch to demoneeded, which is a dependency to demo. 
+
+    >>> write(sample_buildout, 'buildout.cfg',
+    ... """
+    ... [buildout]
+    ... parts = demo
+    ...
+    ... [demo]
+    ... recipe = zc.recipe.egg
+    ... eggs = demo
+    ... find-links = %(server)s
+    ... index = %(server)s/index
+    ... demoneeded-patches =
+    ...   ./demoneeded.patch#4b8ad56711dd0d898a2b7957e9604079
+    ... demoneeded-patch-options = -p2
+    ...
+    ... [versions]
+    ... demoneeded = 1.1+SlapOSPatched001
+    ... """ % dict(server=link_server))
+
+When running buildout, we also have that warning that a different version is installed.
+
+    >>> print_(system(buildout), end='')
+    Installing demo.
+    Getting distribution for 'demo'.
+    Got demo 0.3.
+    patching file eggrecipedemoneeded.py
+    Installing demoneeded 1.1
+    Caused installation of a distribution:
+    demoneeded 1.1+slapospatched001
+    with a different version.
+    Generated script '/sample-buildout/bin/demo'.
+
+The installed egg has the slapospatched001 marker
+
+    >>> ls(sample_buildout, 'eggs')
+    d  demo-0.3-pyN.N.egg
+    d  demoneeded-1.1+slapospatched001-pyN.N.egg
+    -  setuptools-0.7-py2.3.egg
+    d  zc.buildout-1.0-py2.3.egg
+
+If we run the demo script we see the patch was applied:
+
+    >>> print_(system(join(sample_buildout, 'bin', 'demo')), end='')
+    3 patched demoneeded

zc.recipe.egg_/src/zc/recipe/egg/tests.py

@@ -100,6 +100,26 @@ def test_suite():
                zc.buildout.testing.not_found,
                ])
             ),
+        doctest.DocFileSuite(
+            'patches.rst',
+            setUp=setUp, tearDown=zc.buildout.testing.buildoutTearDown,
+            optionflags=doctest.NORMALIZE_WHITESPACE | doctest.ELLIPSIS,
+            checker=renormalizing.RENormalizing([
+               zc.buildout.testing.normalize_path,
+               zc.buildout.testing.normalize_endings,
+               zc.buildout.testing.normalize_script,
+               zc.buildout.testing.normalize_egg_py,
+               zc.buildout.tests.normalize_bang,
+               zc.buildout.tests.normalize_S,
+               zc.buildout.testing.not_found,
+               zc.buildout.testing.easy_install_deprecated,
+               (re.compile(r'[d-]  zc.buildout(-\S+)?[.]egg(-link)?'),
+                'zc.buildout.egg'),
+               (re.compile(r'[d-]  setuptools-[^-]+-'), 'setuptools-X-'),
+               (re.compile(r'eggs\\\\demo'), 'eggs/demo'),
+               (re.compile(r'[a-zA-Z]:\\\\foo\\\\bar'), '/foo/bar'),
+               ])
+            ),
         ]
     if not WINDOWS:
         suites.append(

[Jérome Perrin]

@xavier_thompson there are tests failing in loop since this merge ( https://erp5js.nexedi.net/#/test_result_module/20240508-105335FFC ) , can you please check, maybe it's needed to apply already some changes from slapos!1550 (merged)