tracepoint support for argdist and trace, and new tplist tool for printing tracepoints

README.md

@@ -108,6 +108,7 @@ Examples:
 - tools/[tcpconnect](tools/tcpconnect.py): Trace TCP active connections (connect()). [Examples](tools/tcpconnect_example.txt).
 - tools/[tcpconnlat](tools/tcpconnlat.py): Trace TCP active connection latency (connect()). [Examples](tools/tcpconnlat_example.txt).
 - tools/[tcpretrans](tools/tcpretrans.py): Trace TCP retransmits and TLPs. [Examples](tools/tcpretrans_example.txt).
+- tools/[tplist](tools/tplist.py): Display kernel tracepoints and their format.
 - tools/[trace](tools/trace.py): Trace arbitrary functions, with filters. [Examples](tools/trace_example.txt)
 - tools/[vfscount](tools/vfscount.py) tools/[vfscount.c](tools/vfscount.c): Count VFS calls. [Examples](tools/vfscount_example.txt).
 - tools/[vfsstat](tools/vfsstat.py) tools/[vfsstat.c](tools/vfsstat.c): Count some VFS calls, with column output. [Examples](tools/vfsstat_example.txt).

man/man8/argdist.8

@@ -50,11 +50,11 @@ many cases, argdist will deduce the necessary header files automatically.
 .SH SPECIFIER SYNTAX
 The general specifier syntax is as follows:
 
-.B {p,r}:[library]:function(signature)[:type[,type...]:expr[,expr...][:filter]][#label]
+.B {p,r,t}:{[library],category}:function(signature)[:type[,type...]:expr[,expr...][:filter]][#label]
 .TP
-.B {p,r}
-Probe type \- "p" for function entry, "r" for function return;
-\-H for histogram collection, \-C for frequency count.
+.B {p,r,t}
+Probe type \- "p" for function entry, "r" for function return, "t" for kernel
+tracepoint; \-H for histogram collection, \-C for frequency count.
 Indicates where to place the probe and whether the probe should collect frequency
 count information, or aggregate the collected values into a histogram. Counting 
 probes will collect the number of times every parameter value was observed,
@@ -68,12 +68,17 @@ Specify the full path to the .so or executable file where the function to probe
 resides. Alternatively, you can specify just the lib name: for example, "c"
 refers to libc. If no library name is specified, the kernel is assumed.
 .TP
+.B category
+The category of the kernel tracepoint. For example: net, sched, block.
+.TP
 .B function(signature)
 The function to probe, and its signature.
 The function name must match exactly for the probe to be placed. The signature,
 on the other hand, is only required if you plan to collect parameter values 
 based on that signature. For example, if you only want to collect the first
 parameter, you don't have to specify the rest of the parameters in the signature.
+When capturing kernel tracepoints, this should be the name of the event, e.g.
+net_dev_start_xmit. The signature for kernel tracepoints should be empty.
 .TP
 .B [type[,type...]]
 The type(s) of the expression(s) to capture.
@@ -85,6 +90,9 @@ The expression(s) to capture.
 These are the values that are assigned to the histogram or raw event collection.
 You may use the parameters directly, or valid C expressions that involve the
 parameters, such as "size % 10".
+Tracepoints may access a special structure called "tp" that is formatted according
+to the tracepoint format (which you can obtain using tplist). For example, the
+block:block_rq_complete tracepoint can access tp.nr_sector.
 Return probes can use the argument values received by the
 function when it was entered, through the $entry(paramname) special variable.
 Return probes can also access the function's return value in $retval, and the
@@ -137,6 +145,14 @@ Count fork() calls in libc across all processes, grouped by pid:
 #
 .B argdist -C 'p:c:fork():int:$PID;fork per process'
 .TP
+Print histogram of number of sectors in completing block I/O requests:
+#
+.B argdist -H 't:block:block_rq_complete():u32:tp.nr_sector'
+.TP
+Aggregate interrupts by interrupt request (IRQ):
+#
+.B argdist -C 't:irq:irq_handler_entry():int:tp.irq'
+.TP
 Print histograms of sleep() and nanosleep() parameter values:
 #
 .B argdist -H 'p:c:sleep(u32 seconds):u32:seconds' 'p:c:nanosleep(struct timespec *req):long:req->tv_nsec'

man/man8/tplist.8

+.TH tplist 8  "2016-03-20" "USER COMMANDS"
+.SH NAME
+tplist \- Display kernel tracepoints and their format.
+.SH SYNOPSIS
+.B tplist [-v] [tracepoint]
+.SH DESCRIPTION
+tplist lists all kernel tracepoints, and can optionally print out the tracepoint
+format; namely, the variables that you can trace when the tracepoint is hit. This
+is usually used in conjunction with the argdist and/or trace tools.
+
+On a typical system, accessing the tracepoint list and format requires root.
+.SH OPTIONS
+.TP
+\-v
+Display the variables associated with the tracepoint or tracepoints.
+.TP
+[tracepoint]
+A wildcard expression that specifies which tracepoints to print. For example,
+block:* will print all block tracepoints (block:block_rq_complete, etc.).
+Regular expressions are not supported.
+.SH EXAMPLES
+.TP
+Print all kernel tracepoints:
+#
+.B tplist
+.TP
+Print all net tracepoints with their format:
+#
+.B tplist -v 'net:*'
+.SH SOURCE
+This is from bcc.
+.IP
+https://github.com/iovisor/bcc
+.SH OS
+Linux
+.SH STABILITY
+Unstable - in development.
+.SH AUTHOR
+Sasha Goldshtein

man/man8/trace.8

@@ -45,10 +45,12 @@ information. See PROBE SYNTAX below.
 The general probe syntax is as follows:
 
 .B [{p,r}]:[library]:function [(predicate)] ["format string"[, arguments]]
+
+.B t:category:event [(predicate)] ["format string"[, arguments]]
 .TP
-.B [{p,r}]
-Probe type \- "p" for function entry, "r" for function return. The default
-probe type is "p".
+.B {[{p,r}],t}
+Probe type \- "p" for function entry, "r" for function return, "t" for kernel
+tracepoint. The default probe type is "p".
 .TP
 .B [library]
 Library containing the probe.
@@ -58,9 +60,15 @@ refers to libc. If no library name is specified, the kernel is assumed. Also,
 you can specify an executable name (without a full path) if it is in the PATH.
 For example, "bash".
 .TP
+.B category
+The tracepoint category. For example, "sched" or "irq".
+.TP
 .B function
 The function to probe.
 .TP
+.B event
+The tracepoint event. For example, "block_rq_complete".
+.TP
 .B [(predicate)]
 The filter applied to the captured data. Only if the filter evaluates as true,
 the trace message will be printed. The filter can use any valid C expression
@@ -81,6 +89,11 @@ number of arguments as there are placeholders in the format string. The
 format specifier replacements may be any C expressions, and may refer to the
 same special keywords as in the predicate (arg1, arg2, etc.).
 
+In tracepoints, both the predicate and the arguments may refer to the tracepoint
+format structure, which is stored in the special "tp" variable. For example, the
+block:block_rq_complete tracepoint can print or filter by tp.nr_sector. To 
+discover the format of your tracepoint, use the tplist tool.
+
 The predicate expression and the format specifier replacements for printing
 may also use the following special keywords: $pid, $tgid to refer to the 
 current process' pid and tgid; $uid, $gid to refer to the current user's
@@ -102,6 +115,10 @@ Trace all malloc calls and print the size of the requested allocation:
 Trace returns from the readline function in bash and print the return value as a string:
 #
 .B trace 'r:bash:readline """%s"", retval' 
+.TP
+Trace the block:block_rq_complete tracepoint and print the number of sectors completed:
+#
+.B trace 't:block:block_rq_complete """%d sectors"", tp.nr_sector'
 .SH SOURCE
 This is from bcc.
 .IP

src/python/bcc/__init__.py

@@ -325,6 +325,11 @@ class BPF(object):
         global open_kprobes
         return open_kprobes
 
+    @staticmethod
+    def open_uprobes():
+            global open_uprobes
+            return open_uprobes
+
     @staticmethod
     def detach_kprobe(event):
         ev_name = "p_" + event.replace("+", "_").replace(".", "_")

tools/argdist_example.txt

@@ -262,6 +262,27 @@ p::__kmalloc(size_t size, gfp_t flags):gfp_t,size_t:flags,size
 The flags value must be expanded by hand, but it's still helpful to eliminate
 certain kinds of allocations or visually group them together.
 
+argdist also has basic support for kernel tracepoints. It is sometimes more
+convenient to use tracepoints because they are documented and don't vary a lot
+between kernel versions like function signatures tend to. For example, let's
+trace the net:net_dev_start_xmit tracepoint and print the interface name that
+is transmitting:
+
+# argdist -C 't:net:net_dev_start_xmit(void *a, void *b, struct net_device *c):char*:c->name' -n 2
+[05:01:10]
+t:net:net_dev_start_xmit(void *a, void *b, struct net_device *c):char*:c->name
+        COUNT      EVENT
+        4          c->name = eth0
+[05:01:11]
+t:net:net_dev_start_xmit(void *a, void *b, struct net_device *c):char*:c->name
+        COUNT      EVENT
+        6          c->name = lo
+        92         c->name = eth0
+
+Note that to determine the necessary function signature you need to look at the
+TP_PROTO declaration in the kernel headers. For example, the net_dev_start_xmit
+tracepoint is defined in the include/trace/events/net.h header file.
+
 Here's a final example that finds how many write() system calls are performed
 by each process on the system:
 
@@ -311,13 +332,13 @@ optional arguments:
                         additional header files to include in the BPF program
 
 Probe specifier syntax:
-        {p,r}:[library]:function(signature)[:type[,type...]:expr[,expr...][:filter]][#label]
+        {p,r,t}:{[library],category}:function(signature)[:type[,type...]:expr[,expr...][:filter]][#label]
 Where:
-        p,r        -- probe at function entry or at function exit
+        p,r,t      -- probe at function entry, function exit, or kernel tracepoint
                       in exit probes: can use $retval, $entry(param), $latency
         library    -- the library that contains the function
                       (leave empty for kernel functions)
-        function   -- the function name to trace
+        category   -- the category of the kernel tracepoint (e.g. net, sched)
         signature  -- the function's parameters, as in the C header
         type       -- the type of the expression to collect (supports multiple)
         expr       -- the expression to collect (supports multiple)
@@ -365,7 +386,13 @@ argdist -C 'p:c:fork()#fork calls'
         Count fork() calls in libc across all processes
         Can also use funccount.py, which is easier and more flexible 
 
-argdist  -H \
+argdist -H 't:block:block_rq_complete():u32:tp.nr_sector'
+        Print histogram of number of sectors in completing block I/O requests
+
+argdist -C 't:irq:irq_handler_entry():int:tp.irq'
+        Aggregate interrupts by interrupt request (IRQ)
+
+argdist -H \
         'p:c:sleep(u32 seconds):u32:seconds' \
         'p:c:nanosleep(struct timespec *req):long:req->tv_nsec'
         Print histograms of sleep() and nanosleep() parameter values

tools/tplist.py

+#!/usr/bin/env python
+#
+# tplist    Display kernel tracepoints and their formats.
+#
+# USAGE:    tplist [-v] [tracepoint]
+#
+# Licensed under the Apache License, Version 2.0 (the "License")
+# Copyright (C) 2016 Sasha Goldshtein.
+
+import argparse
+import fnmatch
+import re
+import os
+
+trace_root = "/sys/kernel/debug/tracing"
+event_root = os.path.join(trace_root, "events")
+
+parser = argparse.ArgumentParser(description=
+                "Display kernel tracepoints and their formats.",
+                formatter_class=argparse.RawDescriptionHelpFormatter)
+parser.add_argument("-v", dest="variables", action="store_true", help=
+                "Print the format (available variables) for each tracepoint")
+parser.add_argument(dest="tracepoint", nargs="?",
+                help="The tracepoint name to print (wildcards allowed)")
+args = parser.parse_args()
+
+def print_tpoint_format(category, event):
+        fmt = open(os.path.join(event_root, category, event, "format")
+                  ).readlines()
+        for line in fmt:
+                match = re.search(r'field:([^;]*);', line)
+                if match is None:
+                        continue
+                parts = match.group(1).split()
+                field_name = parts[-1:][0]
+                field_type = " ".join(parts[:-1])
+                if "__data_loc" in field_type:
+                        continue
+                if field_name.startswith("common_"):
+                        continue
+                print("    %s %s;" % (field_type, field_name))
+
+def print_tpoint(category, event):
+        tpoint = "%s:%s" % (category, event)
+        if not args.tracepoint or fnmatch.fnmatch(tpoint, args.tracepoint):
+                print(tpoint)
+                if args.variables:
+                        print_tpoint_format(category, event)
+
+def print_all():
+        for category in os.listdir(event_root):
+                cat_dir = os.path.join(event_root, category)
+                if not os.path.isdir(cat_dir):
+                        continue
+                for event in os.listdir(cat_dir):
+                        evt_dir = os.path.join(cat_dir, event)
+                        if os.path.isdir(evt_dir):
+                                print_tpoint(category, event)
+
+if __name__ == "__main__":
+        print_all()

tools/trace_example.txt

@@ -80,6 +80,31 @@ Note that the retval variable must be cast to int before comparing to zero.
 The reason is that the default type for argN and retval is an unsigned 64-bit
 integer, which can never be smaller than 0.
 
+trace has also some basic support for kernel tracepoints. For example, let's
+trace the block:block_rq_complete tracepoint and print out the number of sectors
+transferred:
+
+# trace 't:block:block_rq_complete "sectors=%d", tp.nr_sector'
+TIME     PID    COMM         FUNC             -
+01:23:51 0      swapper/0    block_rq_complete sectors=8
+01:23:55 10017  kworker/u64: block_rq_complete sectors=1
+01:23:55 0      swapper/0    block_rq_complete sectors=8
+^C
+
+To discover the tracepoint structure format (which you can refer to as the "tp"
+variable), use the tplist tool. For example:
+
+# tplist -v block:block_rq_complete
+block:block_rq_complete
+    dev_t dev;
+    sector_t sector;
+    unsigned int nr_sector;
+    int errors;
+    char rwbs[8];
+
+This output tells you that you can use "tp.dev", "tp.sector", etc. in your
+predicate and trace arguments.
+
 As a final example, let's trace open syscalls for a specific process. By 
 default, tracing is system-wide, but the -p switch overrides this:
 
@@ -144,4 +169,6 @@ trace 'r::__kmalloc (retval == 0) "kmalloc failed!"
         Trace returns from __kmalloc which returned a null pointer
 trace 'r:c:malloc (retval) "allocated = %p", retval
         Trace returns from malloc and print non-NULL allocated buffers
+trace 't:block:block_rq_complete "sectors=%d", tp.nr_sector'
+        Trace the block_rq_complete kernel tracepoint and print # of tx sectors