Pull input fixes from Dmitry Torokhov:

 - a new product ID for the xpad joystick driver

 - fixes to resistive-adc-touch and snvs_pwrkey drivers

 - a change to touchscreen helpers to make clang happier

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: touchscreen - avoid bitwise vs logical OR warning
  Input: xpad - add support for another USB ID of Nacon GC-100
  Input: resistive-adc-touch - fix division by zero error on z1 == 0
  Input: snvs_pwrkey - add clk handling

Merge tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix 'perf test evsel' build error on !x86 architectures

 - Fix libperf's test_stat_cpu mixup of CPU numbers and CPU indexes

 - Output offsets for decompressed records, not just useless zeros

* tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  libperf tests: Fix test_stat_cpu
  libperf test evsel: Fix build error on !x86 architectures
  perf report: Output non-zero offset for decompressed records

Pull memblock fix from Mike Rapoport:
 "Fix handling of NOMAP regions with kmemleak.

  NOMAP regions don't have linear map entries so an attempt to scan
  these areas in kmemleak would fault.

  Prevent such faults by excluding NOMAP regions from kmemleak"

* tag 'fixes-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: exclude NOMAP regions from kmemleak

Tracing fixes for 5.15:

 - Fix defined but not use warning/error for osnoise function

 - Fix memory leak in event probe

 - Fix memblock leak in bootconfig

 - Fix the API of event probes to be like kprobes

 - Added test to check removal of event probe API

 - Fix recordmcount.pl for nds32 failed build

* tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^'
  selftests/ftrace: Update test for more eprobe removal process
  tracing: Fix event probe removal from dynamic events
  tracing: Fix missing * in comment block
  bootconfig: init: Fix memblock leak in xbc_make_cmdline()
  tracing: Fix memory leak in eprobe_register()
  tracing: Fix missing osnoise tracer on max_latency

Pull clk driver fixes from Stephen Boyd:
 "Clk driver fixes for critical issues found in the past few weeks:

   - Select gdsc config so qcom sm6350 driver probes

   - Fix a register offset in qcom gcc-sm6115 so the correct clk is
     controlled

   - Fix inverted logic in Renesas RZ/G2L .is_enabled()

   - Mark some more clks critical in Renesas clk driver

   - Remove a duplicate clk in the agilex driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: add select QCOM_GDSC for SM6350
  clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc
  clk: socfpga: agilex: fix duplicate s2f_user0_clk
  clk: renesas: rzg2l: Fix clk status function
  clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical

Merge tag 'for-5.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM verity target to skip redundant processing on I/O errors.

 - Fix request-based DM so that it doesn't queue request to blk-mq when
   DM device is suspended.

 - Fix DM core mempool NULL pointer race when completing IO.

 - Make DM clone target's 'descs' array static.

* tag 'for-5.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: fix mempool NULL pointer race when completing IO
  dm rq: don't queue request to blk-mq during DM suspend
  dm clone: make array 'descs' static
  dm verity: skip redundant verity_handle_err() on I/O errors

Pull s390 fixes from Vasily Gorbik:

 - Maintainers and reviewers changes:

    * Cornelia decided to free up her time and step down from vfio-ccw
      maintainer and s390 kvm reviewer duties

    * Add Alexander Gordeev as s390 arch code reviewer

 - Fix broken strrchr implementation

* tag 's390-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: add Alexander Gordeev as reviewer
  s390: fix strrchr() implementation
  vfio-ccw: step down as maintainer
  KVM: s390: remove myself as reviewer

Pull csky fixes from Guo Ren:
 "Only 5 fixups:

   - Make HAVE_TCM depend on !COMPILE_TEST

   - bitops: Remove duplicate __clear_bit define

   - Select ARCH_WANT_FRAME_POINTERS only if compiler supports it

   - Fixup regs.sr broken in ptrace

   - don't let sigreturn play with priveleged bits of status register"

* tag 'csky-for-linus-5.15-rc6' of git://github.com/c-sky/csky-linux:
  csky: Make HAVE_TCM depend on !COMPILE_TEST
  csky: bitops: Remove duplicate __clear_bit define
  csky: Select ARCH_WANT_FRAME_POINTERS only if compiler supports it
  csky: Fixup regs.sr broken in ptrace
  csky: don't let sigreturn play with priveleged bits of status register

Pull ARC fix from Vineet Gupta:
 "Small fixlet for ARC"

* tag 'arc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: fix potential build snafu

Pull ARM SoC fixes from Arnd Bergmann:
 "A small number fixes this time, mostly touching actual code:

   - Add platform device for i.MX System Reset Controller (SRC) to
     fix a regression caused by fw_devlink change

   - A fixup for a boot regression caused by my own rework for the
     Qualcomm SCM driver

   - Multiple bugfixes for the Arm FFA and optee firmware drivers,
     addressing problems when they are built as a loadable module

   - Four dts bugfixes for the Broadcom SoC used in Raspberry pi,
     addressing VEC (video encoder), MDIO bus controller
     #address-cells/#size-cells, SDIO voltage and PCIe host bridge
     dtc warnings"

* tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: imx: register reset controller from a platform driver
  iommu/arm: fix ARM_SMMU_QCOM compilation
  ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address
  ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting
  tee: optee: Fix missing devices unregister during optee_remove
  ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states
  ARM: dts: bcm2711: fix MDIO #address- and #size-cells
  ARM: dts: bcm283x: Fix VEC address for BCM2711
  firmware: arm_ffa: Fix __ffa_devices_unregister
  firmware: arm_ffa: Add missing remove callback to ffa_bus_type

Pull pci fix from Bjorn Helgaas:

 - Don't save msi_populate_sysfs() error code as dev->msi_irq_groups so
   we don't dereference the error code as a pointer (Wang Hai)

* tag 'pci-v5.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/MSI: Handle msi_populate_sysfs() errors correctly

Pull ACPI fix from Rafael Wysocki:
 "Add a missing device ID to a quirk list in the suspend-to-idle support
  code"

* tag 'acpi-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PM: Include alternate AMDI0005 id in special behaviour

A new warning in clang points out a few places in this driver where a
bitwise OR is being used with boolean types:

drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
        data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x",
                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This use of a bitwise OR is intentional, as bitwise operations do not
short circuit, which allows all the calls to touchscreen_get_prop_u32()
to happen so that the last parameter is initialized while coalescing the
results of the calls to make a decision after they are all evaluated.

To make this clearer to the compiler, use the '|=' operator to assign
the result of each touchscreen_get_prop_u32() call to data_present,
which keeps the meaning of the code the same but makes it obvious that
every one of these calls is expected to happen.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The Nacon GX100XF is already mapped, but it seems there is a Nacon
GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other
colours exist) with a different USB ID when in XInput mode.
Signed-off-by: Michael Cullen <michael@michaelcullen.name>
Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.nameSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

For proper pressure calculation we need at least x and z1 to be non
zero. Even worse, in case z1 we may run in to division by zero
error.

Fixes: 60b7db91 ("Input: resistive-adc-touch - rework mapping of channels")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an
associated clock. Accessing the registers requires that this clock is
enabled. Binding the driver on at least i.MX7S and i.MX8MP while not
having the clock enabled results in a complete hang of the machine.
(This usually only happens if snvs_pwrkey is built as a module and the
rtc-snvs driver isn't already bound because at bootup the required clk
is on and only gets disabled when the clk framework disables unused clks
late during boot.)

This completes the fix in commit 135be16d ("ARM: dts: imx7s: add
snvs clock to pwrkey").
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

I received a build failure for a new patch I'm working on the nds32
architecture, and when I went to test it, I couldn't get to my build error,
because it failed to build with a bunch of:

  Error: invalid operands (*UND* and *UND* sections) for `^'

issues with various files. Those files were temporary asm files that looked
like:  kernel/.tmp_mc_fork.s

I decided to look deeper, and found that the "mc" portion of that name
stood for "mcount", and was created by the recordmcount.pl script. One that
I wrote over a decade ago. Once I knew the source of the problem, I was
able to investigate it further.

The way the recordmcount.pl script works (BTW, there's a C version that
simply modifies the ELF object) is by doing an "objdump" on the object
file. Looks for all the calls to "mcount", and creates an offset of those
locations from some global variable it can use (usually a global function
name, found with <.*>:). Creates a asm file that is a table of references
to these locations, using the found variable/function. Compiles it and
links it back into the original object file. This asm file is called
".tmp_mc_<object_base_name>.s".

The problem here is that the objdump produced by the nds32 object file,
contains things that look like:

 0000159a <.L3^B1>:
    159a:       c6 00           beqz38 $r6, 159a <.L3^B1>
                        159a: R_NDS32_9_PCREL_RELA      .text+0x159e
    159c:       84 d2           movi55 $r6, #-14
    159e:       80 06           mov55 $r0, $r6
    15a0:       ec 3c           addi10.sp #0x3c

Where ".L3^B1 is somehow selected as the "global" variable to index off of.

Then the assembly file that holds the mcount locations looks like this:

        .section __mcount_loc,"a",@progbits
        .align 2
        .long .L3^B1 + -5522
        .long .L3^B1 + -5384
        .long .L3^B1 + -5270
        .long .L3^B1 + -5098
        .long .L3^B1 + -4970
        .long .L3^B1 + -4758
        .long .L3^B1 + -4122
        [...]

And when it is compiled back to an object to link to the original object,
the compile fails on the "^" symbol.

Simple solution for now, is to have the perl script ignore using function
symbols that have an "^" in the name.

Link: https://lkml.kernel.org/r/20211014143507.4ad2c0f7@gandalf.local.home

Cc: stable@vger.kernel.org
Acked-by: Greentime Hu <green.hu@gmail.com>
Fixes: fbf58a52 ("nds32/ftrace: Add RECORD_MCOUNT support")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

In the big pgtable header split, I inadvertently introduced a couple of
duplicate symbols.

Fixes: fe6cb7b0 ("ARC: mm: disintegrate pgtable.h into levels and flags")
Signed-off-by: Vineet Gupta <vgupta@kernel.org>

Building csky:allmodconfig results in the following build errors.

arch/csky/mm/tcm.c:9:2: error:
		#error "You should define ITCM_RAM_BASE"
    9 | #error "You should define ITCM_RAM_BASE"
      |  ^~~~~
arch/csky/mm/tcm.c:14:2: error:
		#error "You should define DTCM_RAM_BASE"
   14 | #error "You should define DTCM_RAM_BASE"
      |  ^~~~~
arch/csky/mm/tcm.c:18:2: error:
		#error "You should define correct DTCM_RAM_BASE"
   18 | #error "You should define correct DTCM_RAM_BASE"

This is seen with compile tests since those enable HAVE_TCM,
but do not provide useful default values for ITCM_RAM_BASE or
DTCM_RAM_BASE. Disable HAVE_TCM for commpile tests to avoid
the error.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guo Ren <guoren@kernel.org>

Building csky:allmodconfig results in the following build error.

In file included from ./include/linux/bitops.h:33,
                 from ./include/linux/log2.h:12,
                 from kernel/bounds.c:13:
./arch/csky/include/asm/bitops.h:77: error: "__clear_bit" redefined

Since commit 9248e52f ("locking/atomic: simplify non-atomic wrappers"),
__clear_bit is defined in include/asm-generic/bitops/non-atomic.h,
and the define in the csky include file is no longer necessary or useful.
Remove it.

Fixes: 9248e52f ("locking/atomic: simplify non-atomic wrappers")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guo Ren <guoren@kernel.org>

Compiling csky:allmodconfig with an upstream C compiler results
in the following error.

csky-linux-gcc: error:
	unrecognized command-line option '-mbacktrace';
	did you mean '-fbacktrace'?

Select ARCH_WANT_FRAME_POINTERS only if gcc supports it to
avoid the error.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guo Ren <guoren@kernel.org>

gpr_get() return the entire pt_regs (include sr) to userspace, if we
don't restore the C bit in gpr_set, it may break the ALU result in
that context. So the C flag bit is part of gpr context, that's why
riscv totally remove the C bit in the ISA. That makes sr reg clear
from userspace to supervisor privilege.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org

csky restore_sigcontext() blindly overwrites regs->sr with the value
it finds in sigcontext.  Attacker can store whatever they want in there,
which includes things like S-bit.  Userland shouldn't be able to set
that, or anything other than C flag (bit 0).

Do the same thing other architectures with protected bits in flags
register do - preserve everything that shouldn't be settable in
user mode, picking the rest from the value saved is sigcontext.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org

Merge tag 'imx-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.15, round 3:

- Add platform device for i.MX System Reset Controller (SRC) to fix
  a regression caused by fw_devlink change.

* tag 'imx-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: register reset controller from a platform driver

Link: https://lore.kernel.org/r/20211015070017.GI22881@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Pull gpio fixes from Bartosz Golaszewski:

 - fix module autoloading on gpio-74x164 after a revert of OF modaliases

 - fix problems with the bias setting in gpio-pca953x

 - fix a use-after-free bug in gpio-mockup by using software nodes

* tag 'gpio-fixes-for-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: mockup: Convert to use software nodes
  gpio: pca953x: Improve bias setting
  gpio: 74x164: Add SPI device ID table

Pull spi fixes from Mark Brown:
 "A few small fixes.

  Mostly driver specific but there's one in the core which fixes a
  deadlock when adding devices on spi-mux that's triggered because
  spi-mux is a SPI device which is itself a SPI controller and so can
  instantiate devices when registered.

  We were using a global lock to protect against reusing chip selects
  but they're a per controller thing so moving the lock per controller
  resolves that"

* tag 'spi-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi-mux: Fix false-positive lockdep splats
  spi: Fix deadlock when adding SPI controllers on SPI buses
  spi: bcm-qspi: clear MSPI spifie interrupt during probe
  spi: spi-nxp-fspi: don't depend on a specific node name erratum workaround
  spi: mediatek: skip delays if they are 0
  spi: atmel: Fix PDC transfer setup bug
  spi: spidev: Add SPI ID table
  spi: Use 'flash' node name instead of 'spi-flash' in example

Merge tag 'regulator-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "Just a trivial fix to the MAINTAINERS file for an update missed during
  conversion of the DT bindings to YAML format"

* tag 'regulator-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  MAINTAINERS: rectify entry for SY8106A REGULATOR DRIVER

Pull mtd fix from Miquel Raynal:
 "Raw NAND controller driver fix:

   - Qcom: Update code word value for raw reads (QPIC v2+)"

* tag 'mtd/fixes-for-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: qcom: Update code word value for raw read

Pull drm fixes from Dave Airlie:
 "It has a few scattered msm and i915 fixes, a few core fixes and a
  mediatek feature revert.

  I've had to pick a bunch of patches into this, as the drm-misc-fixes
  tree had a bunch of vc4 patches I wasn't comfortable with sending to
  you at least as part of this, they were delayed due to your reverts.
  If it's really useful as fixes I'll do a separate pull.

  Summary:

  Core:
   - clamp fbdev size
   - edid cap blocks read to avoid out of bounds

  panel:
   - fix missing crc32 dependency

  msm:
   - Fix a new crash on dev file close if the dev file was opened when
     GPU is not loaded (such as missing fw in initrd)
   - Switch to single drm_sched_entity per priority level per drm_file
     to unbreak multi-context userspace
   - Serialize GMU access to fix GMU OOB errors
   - Various error path fixes
   - A couple integer overflow fixes
   - Fix mdp5 cursor plane WARNs

  i915:
   - Fix ACPI object leak
   - Fix context leak in user proto-context creation
   - Fix missing i915_sw_fence_fini call

  hyperv:
   - hide hw pointer

  nouveau:
   - fix engine selection bit

  r128:
   - fix UML build

  rcar-du:
   - unconncted LVDS regression fix

  mediatek:
   - revert CMDQ refinement patches"

* tag 'drm-fixes-2021-10-15-1' of git://anongit.freedesktop.org/drm/drm: (34 commits)
  drm/panel: olimex-lcd-olinuxino: select CRC32
  drm/r128: fix build for UML
  drm/nouveau/fifo: Reinstate the correct engine bit programming
  drm/hyperv: Fix double mouse pointers
  drm/fbdev: Clamp fbdev surface size if too large
  drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read
  drm/i915: Free the returned object of acpi_evaluate_dsm()
  drm/i915: Fix bug in user proto-context creation that leaked contexts
  drm: rcar-du: Don't create encoder for unconnected LVDS outputs
  drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handling
  drm/msm/dsi: Fix an error code in msm_dsi_modeset_init()
  drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_ready
  drm/msm/dsi/phy: fix clock names in 28nm_8960 phy
  drm/msm/dpu: Fix address of SM8150 PINGPONG5 IRQ register
  drm/msm: Do not run snapshot on non-DPU devices
  drm/msm/a3xx: fix error handling in a3xx_gpu_init()
  drm/msm/a4xx: fix error handling in a4xx_gpu_init()
  drm/msm: Fix null pointer dereference on pointer edp
  drm/msm/mdp5: fix cursor-related warnings
  drm/msm: Avoid potential overflow in timeout_to_jiffies()
  ...

Pull ntfs3 fixes from Konstantin Komarov:
 "Use the new api for mounting as requested by Christoph.

  Also fixed:

   - some memory leaks and panic

   - xfstests (tested on x86_64) generic/016 generic/021 generic/022
     generic/041 generic/274 generic/423

   - some typos, wrong returned error codes, dead code, etc"

* tag 'ntfs3_for_5.15' of git://github.com/Paragon-Software-Group/linux-ntfs3: (70 commits)
  fs/ntfs3: Check for NULL pointers in ni_try_remove_attr_list
  fs/ntfs3: Refactor ntfs_read_mft
  fs/ntfs3: Refactor ni_parse_reparse
  fs/ntfs3: Refactor ntfs_create_inode
  fs/ntfs3: Refactor ntfs_readlink_hlp
  fs/ntfs3: Rework ntfs_utf16_to_nls
  fs/ntfs3: Fix memory leak if fill_super failed
  fs/ntfs3: Keep prealloc for all types of files
  fs/ntfs3: Remove unnecessary functions
  fs/ntfs3: Forbid FALLOC_FL_PUNCH_HOLE for normal files
  fs/ntfs3: Refactoring of ntfs_set_ea
  fs/ntfs3: Remove locked argument in ntfs_set_ea
  fs/ntfs3: Use available posix_acl_release instead of ntfs_posix_acl_release
  fs/ntfs3: Check for NULL if ATTR_EA_INFO is incorrect
  fs/ntfs3: Refactoring of ntfs_init_from_boot
  fs/ntfs3: Reject mount if boot's cluster size < media sector size
  fs/ntfs3: Refactoring lock in ntfs_init_acl
  fs/ntfs3: Change posix_acl_equiv_mode to posix_acl_update_mode
  fs/ntfs3: Pass flags to ntfs_set_ea in ntfs_set_acl_ex
  fs/ntfs3: Refactor ntfs_get_acl_ex for better readability
  ...

Fix the following build/link error by adding a dependency on the CRC32
routines:

  ld: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.o: in function `lcd_olinuxino_probe':
  panel-olimex-lcd-olinuxino.c:(.text+0x303): undefined reference to `crc32_le'

Fixes: 17fd7a9d ("drm/panel: Add support for Olimex LCD-OLinuXino panel")
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012115242.10325-1-vegard.nossum@oracle.comSigned-off-by: Dave Airlie <airlied@redhat.com>

Fix a build error on CONFIG_UML, which does not support (provide)
wbinvd(). UML can use the generic mb() instead.

../drivers/gpu/drm/r128/ati_pcigart.c: In function ‘drm_ati_pcigart_init’:
../drivers/gpu/drm/r128/ati_pcigart.c:218:2: error: implicit declaration of function ‘wbinvd’ [-Werror=implicit-function-declaration]
  wbinvd();
  ^~~~~~

Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: linux-um@lists.infradead.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011080006.31081-1-rdunlap@infradead.orgSigned-off-by: Dave Airlie <airlied@redhat.com>

Commit 64f7c698 ("drm/nouveau/fifo: add engine_id hook") replaced
fifo/chang84.c g84_fifo_chan_engine() call with an indirect call of
fifo/g84.c g84_fifo_engine_id(). The G84_FIFO_ENGN_* values returned
from the later g84_fifo_engine_id() are incremented by 1 compared to
the previous g84_fifo_chan_engine() return values.

This is fine either way for most of the code, except this one line
where an engine bit programmed into the hardware is derived from the
return value. Decrement the return value accordingly, otherwise the
wrong engine bit is programmed into the hardware and that leads to
the following failure:
nouveau 0000:01:00.0: gr: 00000030 [ILLEGAL_MTHD ILLEGAL_CLASS] ch 1 [003fbce000 DRM] subc 3 class 0000 mthd 085c data 00000420

On the following hardware:
lspci -s 01:00.0
01:00.0 VGA compatible controller: NVIDIA Corporation GT216GLM [Quadro FX 880M] (rev a2)
lspci -ns 01:00.0
01:00.0 0300: 10de:0a3c (rev a2)

Fixes: 64f7c698 ("drm/nouveau/fifo: add engine_id hook")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: <stable@vger.kernel.org> # 5.12+
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007214117.231472-1-marex@denx.deSigned-off-by: Dave Airlie <airlied@redhat.com>

Hyper-V supports a hardware cursor feature. It is not used by Linux VM,
but the Hyper-V host still draws a point as an extra mouse pointer,
which is unwanted, especially when Xorg is running.

The hyperv_fb driver uses synthvid_send_ptr() to hide the unwanted pointer.
When the hyperv_drm driver was developed, the function synthvid_send_ptr()
was not copied from the hyperv_fb driver. Fix the issue by adding the
function into hyperv_drm.

Fixes: 76c56a5a ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Deepak Rawat <drawat.floss@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916193644.45650-1-decui@microsoft.comSigned-off-by: Dave Airlie <airlied@redhat.com>

Clamp the fbdev surface size of the available maximumi height to avoid
failing to init console emulation. An example error is shown below.

  bad framebuffer height 2304, should be >= 768 && <= 768
  [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
  simple-framebuffer simple-framebuffer.0: [drm] *ERROR* fbdev: Failed to setup generic emulation (ret=-22)

This is especially a problem with drivers that have very small screen
sizes and cannot over-allocate at all.

v2:
	* reduce warning level (Ville)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 11e8f5fd ("drm: Add simpledrm driver")
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Amanoel Dawod <kernel@amanoeldawod.com>
Reported-by: Zoltán Kővágó <dirty.ice.hu@gmail.com>
Reported-by: Michael Stapelberg <michael+lkml@stapelberg.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20211005070355.7680-1-tzimmermann@suse.deSigned-off-by: Dave Airlie <airlied@redhat.com>

In commit e11f5bd8 ("drm: Add support for DP 1.4 Compliance edid
corruption test") the function connector_bad_edid() started assuming
that the memory for the EDID passed to it was big enough to hold
`edid[0x7e] + 1` blocks of data (1 extra for the base block). It
completely ignored the fact that the function was passed `num_blocks`
which indicated how much memory had been allocated for the EDID.

Let's fix this by adding a bounds check.

This is important for handling the case where there's an error in the
first block of the EDID. In that case we will call
connector_bad_edid() without having re-allocated memory based on
`edid[0x7e]`.

Fixes: e11f5bd8 ("drm: Add support for DP 1.4 Compliance edid corruption test")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005192905.v2.1.Ib059f9c23c2611cb5a9d760e7d0a700c1295928d@changeidSigned-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'mediatek-drm-fixes-5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes

Mediatek DRM Fixes for Linux 5.15

1. Revert series "CMDQ refinement of Mediatek DRM driver"
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013235044.5488-1-chunkuang.hu@kernel.org

Starting with commit 6b2117ad ("of: property: fw_devlink: Add
support for "resets" and "pwms""), the imx-drm driver fails to load
due to forever dormant devlinks to the reset-controller node. This
node was never associated with a struct device.

Add a platform device to allow fw_devnode to activate the devlinks.

Fixes: 6b2117ad ("of: property: fw_devlink: Add support for "resets" and "pwms"")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Merge tag 'drm-intel-fixes-2021-10-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.15-rc6:
- Fix ACPI object leak
- Fix context leak in user proto-context creation
- Fix missing i915_sw_fence_fini call
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zgrbvgls.fsf@intel.com

Pull networking fixes from Jakub Kicinski:
 "Quite calm.

  The noisy DSA driver (embedded switches) changes, and adjustment to
  IPv6 IOAM behavior add to diffstat's bottom line but are not scary.

  Current release - regressions:

   - af_unix: rename UNIX-DGRAM to UNIX to maintain backwards
     compatibility

   - procfs: revert "add seq_puts() statement for dev_mcast", minor
     format change broke user space

  Current release - new code bugs:

   - dsa: fix bridge_num not getting cleared after ports leaving the
     bridge, resource leak

   - dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware
     bridges using VID 0, prevent packet drops if pvid is removed

   - dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW
     getting confused about station to VLAN mapping

  Previous releases - regressions:

   - virtio-net: fix for skb_over_panic inside big mode

   - phy: do not shutdown PHYs in READY state

   - dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link
     LED staying lit after ifdown

   - mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL)

   - mqprio: Correct stats in mqprio_dump_class_stats()

   - ice: fix deadlock for Tx timestamp tracking flush

   - stmmac: fix feature detection on old hardware

  Previous releases - always broken:

   - sctp: account stream padding length for reconf chunk

   - icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe()

   - isdn: cpai: check ctr->cnr to avoid array index out of bound

   - isdn: mISDN: fix sleeping function called from invalid context

   - nfc: nci: fix potential UAF of rf_conn_info object

   - dsa: microchip: prevent ksz_mib_read_work from kicking back in
     after it's canceled in .remove and crashing

   - dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged
     ports

   - dsa: sja1105, ocelot: break circular dependency between switch and
     tag drivers

   - dsa: felix: improve timestamping in presence of packe loss

   - mlxsw: thermal: fix out-of-bounds memory accesses

  Misc:

   - ipv6: ioam: move the check for undefined bits to improve
     interoperability"

* tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
  icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe
  MAINTAINERS: Update the devicetree documentation path of imx fec driver
  sctp: account stream padding length for reconf chunk
  mlxsw: thermal: Fix out-of-bounds memory accesses
  ethernet: s2io: fix setting mac address during resume
  NFC: digital: fix possible memory leak in digital_in_send_sdd_req()
  NFC: digital: fix possible memory leak in digital_tg_listen_mdaa()
  nfc: fix error handling of nfc_proto_register()
  Revert "net: procfs: add seq_puts() statement for dev_mcast"
  net: encx24j600: check error in devm_regmap_init_encx24j600
  net: korina: select CRC32
  net: arc: select CRC32
  net: dsa: felix: break at first CPU port during init and teardown
  net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports
  net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent
  net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib
  net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver
  net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header
  net: mscc: ocelot: deny TX timestamping of non-PTP packets
  net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb
  ...