- 18 Sep, 2024 12 commits
-
-
Asad Kamal authored
Update PMFW interface headers for updated metrics table with gfx activity per xcd Signed-off-by:
Asad Kamal <asad.kamal@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
This was only used as workaround for recovering the page tables after VRAM was lost and is no longer necessary after the function amdgpu_vm_bo_reset_state_machine() started to do the same. Compute never used shadows either, so the only proplematic case left is SVM and that is most likely not recoverable in any way when VRAM is lost. Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
-
Alex Deucher authored
Need to make sure it's halted as we don't know what state the GPU may have been left in previously. Tested-by:
Amber Lin <Amber.Lin@amd.com> Acked-by:
-
Alex Deucher authored
Need to set the pipe reset and cache invalidation bits on halt otherwise we can get stale state if the CP firmware changes (e.g., on module unload and reload). Tested-by:
-
David Belanger authored
Move enable_doorbell_selfring_aperture from common_hw_init to common_late_init in soc24, otherwise selfring aperture is initialized with an incorrect doorbell aperture base. Port changes from this commit from soc21 to soc24: commit 1c312e81 ("drm/amdgpu: Enable doorbell selfring after resize FB BAR") Signed-off-by:
David Belanger <david.belanger@amd.com> Reviewed-by:
-
Jack Xiao authored
The SET_SHADER_DEBUGGER packet must work with the added hardware queue, switch the packet submitting to mes schq pipe. Signed-off-by:
Jack Xiao <Jack.Xiao@amd.com> Acked-by:
-
Kent Russell authored
During init, there can be some collisions on the i2c bus that result in the EEPROM read failing. This has been mitigated in the PMFW to a degree, but there is still a small chance that the bus will be busy. When the read fails during RAS init, that disables page retirement altogether, which is obviously not ideal. To try to avoid that situation, set the eeprom_read function to retry once if the first read fails, specifically for smu_v13_0_6. Signed-off-by:
Kent Russell <kent.russell@amd.com> Reviewed-by:
-
Yan Zhen authored
Correctly spelled comments make it easier for the reader to understand the code. Replace 'maxium' with 'maximum' in the comment & replace 'diffculty' with 'difficulty' in the comment & replace 'suppluy' with 'supply' in the comment & replace 'Congiuration' with 'Configuration' in the comment & replace 'eanbled' with 'enabled' in the comment. Signed-off-by:
Yan Zhen <yanzhen@vivo.com> Signed-off-by:
-
Andrew Kreimer authored
Fix a typo in comments. Reported-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
Andrew Kreimer <algonell@gmail.com> Signed-off-by:
-
Yan Zhen authored
Correctly spelled comments make it easier for the reader to understand the code. Replace 'udpate' with 'update' in the comment & replace 'recieved' with 'received' in the comment & replace 'dsiable' with 'disable' in the comment & replace 'Initiailize' with 'Initialize' in the comment & replace 'disble' with 'disable' in the comment & replace 'Disbale' with 'Disable' in the comment & replace 'enogh' with 'enough' in the comment & replace 'availabe' with 'available' in the comment. Acked-by:
-
Alex Deucher authored
Fix spelling in documentation. Reviewed-by:
-
Alex Deucher authored
Drop wrapper used in one place. gfx_v9_4_3_xcc_cp_enable() is used in one place. gfx_v9_4_3_xcc_cp_compute_enable() is used everywhere else. Reviewed-by:
-
- 17 Sep, 2024 6 commits
-
-
Bob Zhou authored
The module param pcie_p2p should be checked for kfd p2p feature, so add it. Fixes: 75f0efbc ("drm/amdgpu: Take IOMMU remapping into account for p2p checks") Signed-off-by:
Bob Zhou <bob.zhou@amd.com> Reviewed-by:
-
Tao Zhou authored
The feature is not applicable to specific app platform. v2: update the disablement condition and commit description v3: move the setting to amdgpu_ras_check_supported Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Tim Huang authored
This resolves the dereference null return value warning reported by Coverity. Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
Jesse Zhang <jesse.zhang@amd.com> Signed-off-by:
-
Jesse Zhang authored
Variable hub_inst is unused. Fixes: e28604d8 ("drm/amdkfd: Drop poison hanlding from gfx v10") Signed-off-by:
-
Kent Russell authored
We were removing the kernfs entry for queue info before checking if the queue could be destroyed. If it failed to get destroyed (e.g. during some GPU resets), then we would try to delete it later during pqm teardown, but the file was already removed. This led to a kernel WARN trying to remove size, gpuid and type. Move the remove to after the destroy check. Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-xe-next-fixes-2024-09-12' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next Driver Changes: - Fix usefafter-free when provisioning VF (Matthew Auld) - Suppress rpm warning on false positive (Rodrigo) - Fix memleak on ioctl error path (Dafna) - Fix use-after-free while inserting ggtt (Michal Wajdeczko) - Add Wa_15016589081 workaround (Tejas) - Fix error path on suspend (Maarten) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/az6xs2z6zj3brq2h5wgaaoxwnqktrwbvxoyckrz7gbywsso734@a6v7gytqbcd6
-
- 16 Sep, 2024 1 commit
-
-
Dave Airlie authored
Merge tag 'amd-drm-next-6.12-2024-09-13' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.12-2024-09-13: amdgpu: - GPUVM sync fixes - kdoc fixes - Misc spelling mistakes - Add some raven GFXOFF quirks - Use clamp helper - DC fixes - JPEG fixes - Process isolation fix - Queue reset fix - W=1 cleanup - SMU14 fixes - JPEG fixes amdkfd: - Fetch cacheline info from IP discovery - Queue reset fix - RAS fix - Document SVM events - CRIU fixes - Race fix in dma-buf handling drm: - dma-buf fd race fixes Signed-off-by:
-
- 13 Sep, 2024 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2024-09-12' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next - Add missing I915_FORMAT_MOD_4_TILED_BMG_CCS modifier for BMG - Printk formatting fix Signed-off-by:
-
- 12 Sep, 2024 7 commits
-
-
Maarten Lankhorst authored
This error path was missed when converting away from xe_display_pm_resume with second argument. Fixes: 66a0f6b9 ("drm/xe/display: handle HPD polling in display runtime suspend/resume") Cc: Arun R Murthy <arun.r.murthy@intel.com> Cc: Vinod Govindapillai <vinod.govindapillai@intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240905150052.174895-2-maarten.lankhorst@linux.intel.com (cherry picked from commit 474f64cb988a410db8a0b779d6afdaa2a7fc5759) Signed-off-by:
-
Tejas Upadhyay authored
Wa_15016589081 applies to xe2_hpg renderCS V2(Gustavo) - rename bit macro Signed-off-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by:
Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by:
Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240904101333.2049655-1-tejas.upadhyay@intel.comSigned-off-by:
Nirmoy Das <nirmoy.das@intel.com> (cherry picked from commit 9db969b36b2fbca13ad4088aff725ebd5e8142f5) Signed-off-by:
-
Michal Wajdeczko authored
When we fail to map a BO in the GGTT, we release our GGTT node placeholder, but leave stale bo->ggtt_node pointer to it, which triggers an assert immediately followed by a crash, due to UAF: [ ] xe 0000:00:02.0: [drm] Assertion `bo->ggtt_node->base.size == bo->size` failed! [ ] WARNING: CPU: 4 PID: 126 at drivers/gpu/drm/xe/xe_ggtt.c:689 xe_ggtt_remove_bo+0x1d9/0x250 [xe] [ ] RIP: 0010:xe_ggtt_remove_bo+0x1d9/0x250 [xe] [ ] Call Trace: [ ] <TASK> [ ] ? __warn+0x88/0x190 [ ] ? xe_ggtt_remove_bo+0x1d9/0x250 [xe] [ ] ? report_bug+0x1c3/0x1d0 [ ] ? handle_bug+0x42/0x70 [ ] ? exc_invalid_op+0x14/0x70 [ ] ? asm_exc_invalid_op+0x16/0x20 [ ] ? xe_ggtt_remove_bo+0x1d9/0x250 [xe] [ ] ? xe_ggtt_remove_bo+0x1d9/0x250 [xe] [ ] xe_ttm_bo_destroy+0x11f/0x260 [xe] [ ] ? ttm_bo_release+0x31c/0x350 [ttm] [ ] ? __mutex_unlock_slowpath+0x35/0x270 [ ] __xe_bo_create_locked+0x4a0/0x550 [xe] [ ] ? mark_held_locks+0x49/0x80 [ ] xe_bo_create_pin_map_at+0x37/0x200 [xe] [ ] xe_bo_create_pin_map+0x11/0x20 [xe] While around, for similar reason, also don't keep an error pointer if we fail to allocate ggtt_node placeholder. Fixes: 34e80422 ("drm/xe: Make xe_ggtt_node struct independent") Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240906220348.1836-1-michal.wajdeczko@intel.com (cherry picked from commit f2710d95724ebbfa35d6d4b82017eeab70994509) Signed-off-by:
-
Dafna Hirschfeld authored
Fix memleak caused by missing xe_vm_put Fixes: 852856e3 ("drm/xe: Use reserved copy engine for user binds on faulting devices") Signed-off-by:
Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by:
-
Arnd Bergmann authored
The 'runtime_status' field is an implementation detail of the power management code, so a device driver should not normally touch this: drivers/gpu/drm/xe/xe_pm.c: In function 'xe_pm_suspending_or_resuming': drivers/gpu/drm/xe/xe_pm.c:606:26: error: 'struct dev_pm_info' has no member named 'runtime_status' 606 | return dev->power.runtime_status == RPM_SUSPENDING || | ^ drivers/gpu/drm/xe/xe_pm.c:607:27: error: 'struct dev_pm_info' has no member named 'runtime_status' 607 | dev->power.runtime_status == RPM_RESUMING; | ^ drivers/gpu/drm/xe/xe_pm.c:608:1: error: control reaches end of non-void function [-Werror=return-type] Add an #ifdef check to avoid the build regression. Fixes: ad92f523 ("drm/xe: Suppress missing outer rpm protection warning") Reviewed-by:Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240909202521.1018439-1-arnd@kernel.orgSigned-off-by:
-
Rodrigo Vivi authored
Do not raise a WARN if we are likely within suspending or resuming path. This is likely this false positive: rpm_status: 0000:03:00.0 status=RPM_SUSPENDING console: xe_bo_evict_all (called from suspend) xe_sched_job_create: dev=0000:03:00.0, ... xe_sched_job_exec: dev=0000:03:00.0, ... xe_pm_runtime_put: dev=0000:03:00.0, ... xe_sched_job_run: dev=0000:03:00.0, ... rpm_usage: 0000:03:00.0 flags-0 cnt-2 ... rpm_usage: 0000:03:00.0 flags-0 cnt-2 ... rpm_usage: 0000:03:00.0 flags-0 cnt-2 ... console: xe 0000:03:00.0: [drm] Missing outer runtime PM protection console: xe_guc_ct_send+0x15/0x50 [xe] console: guc_exec_queue_run_job+0x1509/0x3950 [xe] [snip] console: drm_sched_run_job_work+0x649/0xc20 At this point, BOs are getting evicted from VRAM with rpm usage-counter = 2, but rpm status = SUSPENDING. The xe->pm_callback_task won't be equal 'current' because this call is coming from a work queue. So, pm_runtime_get_if_active() will be called and return 0 because rpm status != ACTIVE (but equal SUSPENDING or RESUMING). v2: Still get the reference even on non suspending/resuming path (Jonathan, Brost). Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by:Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240905140215.56404-1-rodrigo.vivi@intel.comSigned-off-by:
-
Matthew Auld authored
The node ptr can point to an already freed ptr, if we hit the path with an already allocated node. We later dereference that pointer with: xe_gt_assert(gt, !xe_ggtt_node_allocated(node)); which is a potential UAF. Fix this by not stashing the ptr for node. Also since it is likely a bad idea to leave config->ggtt_region pointing to a stale ptr, also set that to NULL by calling pf_release_vf_config_ggtt() instead of pf_release_ggtt(). Fixes: 34e80422 ("drm/xe: Make xe_ggtt_node struct independent") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
- 11 Sep, 2024 7 commits
-
-
Leo Li authored
[Why] DC has a special commit path for native cursor, which use the built-in cursor pipe within DCN planes. This update path does not require all enabled planes to be added to the list of surface updates sent to DC. This is not the case for overlay cursor; it uses the same path as MPO commits. This update path requires all enabled planes to be added to the list of surface updates sent to DC. Otherwise, DC will disable planes not inside the list. [How] If overlay cursor is needed, add all planes on the same CRTC as this cursor to the atomic state. This is already done for non-cursor planes (MPO), just before the added lines. Fixes: 1b04dcca ("drm/amd/display: Introduce overlay cursor mode") Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.comReviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Leo Li <sunpeng.li@amd.com> Tested-by:
Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by:
-
Jani Nikula authored
s/0x04%x/0x%04x/ to use 0 prefixed width 4 instead of printing 04 verbatim. Fixes: 51f57481 ("drm/i915/bios: create fake child devices on missing VBT") Cc: stable@vger.kernel.org # v5.13+ Reviewed-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240905112519.4186408-1-jani.nikula@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 54df34c5a2439b481f066476e67bfa21a0a640e5) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Juha-Pekka Heikkila authored
Let I915_FORMAT_MOD_4_TILED_BMG_CCS show up as supported modifier Fixes: 97c6efb3 ("drm/i915/display: Plane capability for 64k phys alignment") Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by:
-
Simona Vetter authored
Thomas needs 5a498d4d ("drm/fbdev-dma: Only install deferred I/O if necessary") in drm-misc, so start the backmerge cascade. Signed-off-by:
Simona Vetter <simona.vetter@ffwll.ch>
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2024-09-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next Short summary of fixes pull: tegra: - Fix uninitialized variable in EDID code Signed-off-by:
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Three cleanups - Drop stale exynos file pattern from MAINTAINERS file The old "exynos" directory is removed from MAINTAINERS as Samsung Exynos display bindings have been relocated. This resolves a warning from get_maintainers.pl about no files matching the outdated directory. - Constify struct exynos_drm_ipp_funcs By making struct exynos_drm_ipp_funcs constant, the patch enhances security by moving the structure to a read-only section of memory. This change results in a slight reduction in the data section size. - Remove unnecessary code The function exynos_atomic_commit is removed as it became redundant after a previous update. This cleans up the code and eliminates unused function declarations. One fixup - Fix wrong assignment in gsc_bind() A double assignment in gsc_bind() was flagged by the cocci tool and corrected to fix an incorrect assignment, addressing a potential issue introduced in a prior commit. Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-next-6.12-2024-09-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.12-2024-09-06: amdgpu: - IPS updates - Post divider fix - DML2 updates - Misc static checker fixes - DCN 3.5 fixes - Replay fixes - DMCUB updates - SWSMU fixes - DP MST fixes - Add debug flag for per queue resets - devcoredump updates - SR-IOV fixes - MES fixes - Always allocate cleared VRAM for GEM - Pipe reset for GC 9.4.3 - ODM policy fixes - Per queue reset support for GC 10 - Per queue reset support for GC 11 - Per queue reset support for GC 12 - Display flickering fixes - MPO fixes - Display sharpening updates amdkfd: - SVM fix for IH for APUs Signed-off-by:
-
- 10 Sep, 2024 6 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2024-09-06' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next Driver Changes: - Expose fan speed via hwmon (Raag) - Correction to Wa_14019159160 on ARL (John H) - Whitelist COMMON_SLICE_CHICKEN1 for UMD access on DG2/MTL/ARL (Dnyaneshwar) - Do not attempt to load the GSC multiple times to avoid hanging GSC HW (Daniele) - Populate /sys/class/drm/cardX/engines/ even if one engine fails (Andi) - Use kmemdup_array instead of kmemdup for multiple allocation (Yu) - Remove extra unlikely() (Hongbo) Signed-off-by:
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
Instead of trying to use close_fd() on failure exits, just have criu_get_prime_handle() store the file reference without inserting it into descriptor table. Then, once the callers are past the last failure exit, they can go and either insert all those file references into the corresponding slots of descriptor table, or drop all those file references and free the unused descriptors. Reviewed-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
-
Al Viro authored
Using drm_gem_prime_handle_to_fd() to set dmabuf up and insert it into descriptor table, only to have it looked up by file descriptor and remove it from descriptor table is not just too convoluted - it's racy; another thread might have modified the descriptor table while we'd been going through that song and dance. Switch kfd_mem_export_dmabuf() to using drm_gem_prime_handle_to_dmabuf() and leave the descriptor table alone... Reviewed-by:
-
Al Viro authored
Once something had been put into descriptor table, the only thing you can do with it is returning descriptor to userland - you can't withdraw it on subsequent failure exit, etc. You certainly can't count upon it staying in the same slot of descriptor table - another thread could've played with close(2)/dup2(2)/whatnot. drm_gem_prime_handle_to_fd() creates a dmabuf, allocates a descriptor and attaches dmabuf's file to it (the last two steps are done in dma_buf_fd()). That's nice when all you are going to do is passing a descriptor to userland. If you just need to work with the resulting object or have something else to be done that might fail, drm_gem_prime_handle_to_fd() is racy. The problem is analogous to one with anon_inode_getfd(), and solution is similar to what anon_inode_getfile() provides. Add drm_gem_prime_handle_to_dmabuf() - the "set dmabuf up" parts of drm_gem_prime_handle_to_fd() without the descriptor-related ones. Instead of inserting into descriptor table and returning the file descriptor it just returns the struct file. drm_gem_prime_handle_to_fd() becomes a wrapper for it. Other users will be introduced in the next commit. Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Alex Deucher authored
Per the comments, these are variable sized arrays. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3613Reviewed-by:
-
