- 31 Aug, 2023 3 commits
-
-
baozhu.liu authored
If komeda_pipeline_unbound_components() returns -EDEADLK, it means that a deadlock happened in the locking context. Currently, komeda is not dealing with the deadlock properly,producing the following output when CONFIG_DEBUG_WW_MUTEX_SLOWPATH is enabled: ------------[ cut here ]------------ [ 26.103984] WARNING: CPU: 2 PID: 345 at drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c:1248 komeda_release_unclaimed_resources+0x13c/0x170 [ 26.117453] Modules linked in: [ 26.120511] CPU: 2 PID: 345 Comm: composer@2.1-se Kdump: loaded Tainted: G W 5.10.110-SE-SDK1.8-dirty #16 [ 26.131374] Hardware name: Siengine Se1000 Evaluation board (DT) [ 26.137379] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) [ 26.143385] pc : komeda_release_unclaimed_resources+0x13c/0x170 [ 26.149301] lr : komeda_release_unclaimed_resources+0xbc/0x170 [ 26.155130] sp : ffff800017b8b8d0 [ 26.158442] pmr_save: 000000e0 [ 26.161493] x29: ffff800017b8b8d0 x28: ffff000cf2f96200 [ 26.166805] x27: ffff000c8f5a8800 x26: 0000000000000000 [ 26.172116] x25: 0000000000000038 x24: ffff8000116a0140 [ 26.177428] x23: 0000000000000038 x22: ffff000cf2f96200 [ 26.182739] x21: ffff000cfc300300 x20: ffff000c8ab77080 [ 26.188051] x19: 0000000000000003 x18: 0000000000000000 [ 26.193362] x17: 0000000000000000 x16: 0000000000000000 [ 26.198672] x15: b400e638f738ba38 x14: 0000000000000000 [ 26.203983] x13: 0000000106400a00 x12: 0000000000000000 [ 26.209294] x11: 0000000000000000 x10: 0000000000000000 [ 26.214604] x9 : ffff800012f80000 x8 : ffff000ca3308000 [ 26.219915] x7 : 0000000ff3000000 x6 : ffff80001084034c [ 26.225226] x5 : ffff800017b8bc40 x4 : 000000000000000f [ 26.230536] x3 : ffff000ca3308000 x2 : 0000000000000000 [ 26.235847] x1 : 0000000000000000 x0 : ffffffffffffffdd [ 26.241158] Call trace: [ 26.243604] komeda_release_unclaimed_resources+0x13c/0x170 [ 26.249175] komeda_crtc_atomic_check+0x68/0xf0 [ 26.253706] drm_atomic_helper_check_planes+0x138/0x1f4 [ 26.258929] komeda_kms_check+0x284/0x36c [ 26.262939] drm_atomic_check_only+0x40c/0x714 [ 26.267381] drm_atomic_nonblocking_commit+0x1c/0x60 [ 26.272344] drm_mode_atomic_ioctl+0xa3c/0xb8c [ 26.276787] drm_ioctl_kernel+0xc4/0x120 [ 26.280708] drm_ioctl+0x268/0x534 [ 26.284109] __arm64_sys_ioctl+0xa8/0xf0 [ 26.288030] el0_svc_common.constprop.0+0x80/0x240 [ 26.292817] do_el0_svc+0x24/0x90 [ 26.296132] el0_svc+0x20/0x30 [ 26.299185] el0_sync_handler+0xe8/0xf0 [ 26.303018] el0_sync+0x1a4/0x1c0 [ 26.306330] irq event stamp: 0 [ 26.309384] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 26.315650] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.323825] softirqs last enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.331997] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 26.338261] ---[ end trace 20ae984fa860184a ]--- [ 26.343021] ------------[ cut here ]------------ [ 26.347646] WARNING: CPU: 3 PID: 345 at drivers/gpu/drm/drm_modeset_lock.c:228 drm_modeset_drop_locks+0x84/0x90 [ 26.357727] Modules linked in: [ 26.360783] CPU: 3 PID: 345 Comm: composer@2.1-se Kdump: loaded Tainted: G W 5.10.110-SE-SDK1.8-dirty #16 [ 26.371645] Hardware name: Siengine Se1000 Evaluation board (DT) [ 26.377647] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) [ 26.383649] pc : drm_modeset_drop_locks+0x84/0x90 [ 26.388351] lr : drm_mode_atomic_ioctl+0x860/0xb8c [ 26.393137] sp : ffff800017b8bb10 [ 26.396447] pmr_save: 000000e0 [ 26.399497] x29: ffff800017b8bb10 x28: 0000000000000001 [ 26.404807] x27: 0000000000000038 x26: 0000000000000002 [ 26.410115] x25: ffff000cecbefa00 x24: ffff000cf2f96200 [ 26.415423] x23: 0000000000000001 x22: 0000000000000018 [ 26.420731] x21: 0000000000000001 x20: ffff800017b8bc10 [ 26.426039] x19: 0000000000000000 x18: 0000000000000000 [ 26.431347] x17: 0000000002e8bf2c x16: 0000000002e94c6b [ 26.436655] x15: 0000000002ea48b9 x14: ffff8000121f0300 [ 26.441963] x13: 0000000002ee2ca8 x12: ffff80001129cae0 [ 26.447272] x11: ffff800012435000 x10: ffff000ed46b5e88 [ 26.452580] x9 : ffff000c9935e600 x8 : 0000000000000000 [ 26.457888] x7 : 000000008020001e x6 : 000000008020001f [ 26.463196] x5 : ffff80001085fbe0 x4 : fffffe0033a59f20 [ 26.468504] x3 : 000000008020001e x2 : 0000000000000000 [ 26.473813] x1 : 0000000000000000 x0 : ffff000c8f596090 [ 26.479122] Call trace: [ 26.481566] drm_modeset_drop_locks+0x84/0x90 [ 26.485918] drm_mode_atomic_ioctl+0x860/0xb8c [ 26.490359] drm_ioctl_kernel+0xc4/0x120 [ 26.494278] drm_ioctl+0x268/0x534 [ 26.497677] __arm64_sys_ioctl+0xa8/0xf0 [ 26.501598] el0_svc_common.constprop.0+0x80/0x240 [ 26.506384] do_el0_svc+0x24/0x90 [ 26.509697] el0_svc+0x20/0x30 [ 26.512748] el0_sync_handler+0xe8/0xf0 [ 26.516580] el0_sync+0x1a4/0x1c0 [ 26.519891] irq event stamp: 0 [ 26.522943] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 26.529207] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.537379] softirqs last enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.545550] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 26.551812] ---[ end trace 20ae984fa860184b ]--- According to the call trace information,it can be located to be WARN_ON(IS_ERR(c_st)) in the komeda_pipeline_unbound_components function; Then follow the function. komeda_pipeline_unbound_components -> komeda_component_get_state_and_set_user -> komeda_pipeline_get_state_and_set_crtc -> komeda_pipeline_get_state ->drm_atomic_get_private_obj_state -> drm_atomic_get_private_obj_state -> drm_modeset_lock komeda_pipeline_unbound_components -> komeda_component_get_state_and_set_user -> komeda_component_get_state -> drm_atomic_get_private_obj_state -> drm_modeset_lock ret = drm_modeset_lock(&obj->lock, state->acquire_ctx); if (ret) return ERR_PTR(ret); Here it return -EDEADLK. deal with the deadlock as suggested by [1], using the function drm_modeset_backoff(). [1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking Therefore, handling this problem can be solved by adding return -EDEADLK back to the drm_modeset_backoff processing flow in the drm_mode_atomic_ioctl function. Signed-off-by:baozhu.liu <lucas.liu@siengine.com> Signed-off-by:
menghui.huang <menghui.huang@siengine.com> Reviewed-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Christian König authored
During device bringup it might be that we can't access the debugfs files. Return -ENODEV until the registration is completed on access. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-3-christian.koenig@amd.com
-
Christian König authored
We want to remove per minor debugfs directories. Start by stopping drivers from adding anything inside of those in the mid layer callback. v2: drop it for the accel node as well Signed-off-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by:
-
- 28 Aug, 2023 11 commits
-
-
Thomas Zimmermann authored
Initialize struct fb_ops to the correct default values with the macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks to use the infix _sbusfb_. This makes them fit the SBUS helpers' naming pattern. Also make the driver depend on FB_SBUS_HELPERS, which selects the correct modules. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-12-tzimmermann@suse.de
-
Thomas Zimmermann authored
Initialize struct fb_ops to the correct default values with the macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks to use the infix _sbusfb_. This makes them fit the SBUS helpers' naming pattern. Also make the driver depend on FB_SBUS_HELPERS, which selects the correct modules. Signed-off-by:
-
Thomas Zimmermann authored
Initialize struct fb_ops to the correct default values with the macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks to use the infix _sbusfb_. This makes them fit the SBUS helpers' naming pattern. Also make the driver depend on FB_SBUS_HELPERS, which selects the correct modules. Signed-off-by:
-
Thomas Zimmermann authored
Initialize struct fb_ops to the correct default values with the internal __FB_DEFAULT_SBUS_OPS_*() macros. Rename the ioctl and mmap callbacks to use the infix _sbusfb_. This makes them fit the SBUS helpers' naming pattern. It is not possible to use set all defaults via FB_DEAFULT_SBUS_OPS(), as ffb provides its own implementation of fb_fillrect, fb_copyarea, and fb_imageblit. Hence we also avoid FB_SBUS_HELPERS, but let the driver select its dependencies individually instead. Signed-off-by:
-
Thomas Zimmermann authored
Initialize struct fb_ops to the correct default values with the internal __FB_DEFAULT_SBUS_OPS_*() macros. Rename the ioctl and mmap callbacks to use the infix _sbusfb_. This makes them fit the SBUS helpers' naming pattern. It is not possible to use set all defaults via FB_DEAFULT_SBUS_OPS(), as cg6 provides its own implementation of fb_fillrect, fb_copyarea, and fb_imageblit. Hence we also avoid FB_SBUS_HELPERS, but let the driver select its dependencies individually instead. Signed-off-by:
-
Thomas Zimmermann authored
Initialize struct fb_ops to the correct default values with the macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks to use the infix _sbusfb_. This makes them fit the SBUS helpers' naming pattern. Also make the driver depend on FB_SBUS_HELPERS, which selects the correct modules. Signed-off-by:
-
Thomas Zimmermann authored
Initialize struct fb_ops to the correct default values with the macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks to use the infix _sbusfb_. This makes them fit the SBUS helpers' naming pattern. Also make the driver depend on FB_SBUS_HELPERS, which selects the correct modules. Signed-off-by:
-
Thomas Zimmermann authored
Initialize struct fb_ops to the correct default values with the macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks to use the infix _sbusfb_. This makes them fit the SBUS helpers' naming pattern. Also make the driver depend on FB_SBUS_HELPERS, which selects the correct modules. Signed-off-by:
-
Thomas Zimmermann authored
Add macros to initialize struct fb_ops for drivers that support framebuffers on Sparc's SBUS. Also add a Kconfig token that selects the necessary helpers. Signed-off-by:
-
Thomas Zimmermann authored
In sbuslib.h, declare all of the header file's structs at the top. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Avoid duplicate listings of sbuslib.o in the Makefile by building it if CONFIG_FB_SBUS has been selected. Remove the object file from the various drivers' build rules. Signed-off-by:
-
- 26 Aug, 2023 6 commits
-
-
Arthur Grillo authored
Insert parameterized test for the drm_fb_memcpy() to ensure correctness and prevent future regressions. The test case can accept different formats. Signed-off-by:
Arthur Grillo <arthurgrillo@riseup.net> Signed-off-by:
Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230814-gsoc-drm-format-test-v2-v3-6-bd3e9f9bc2fb@riseup.net
-
Arthur Grillo authored
The drm_fb_memcpy() supports multi-plane formats. To fully test it in the future, add multi-plane support to the conversion_buf_size() helper. Signed-off-by:
-
Arthur Grillo authored
Insert parameterized test for the drm_fb_build_fourcc_list() to ensure correctness and prevent future regressions. Signed-off-by:
-
Arthur Grillo authored
Insert parameterized test for the drm_fb_clip_offset() to ensure correctness and prevent future regressions. Signed-off-by:
-
Arthur Grillo authored
Insert parameterized test for the drm_fb_swab() to ensure correctness and prevent future regressions. Each expected color has it bytes reversed in order, so xrgb would be bgrx. Signed-off-by:
-
Arthur Grillo authored
Test the default pitch fallback when NULL is passed as the dst_pitch on the conversion procedures. Reviewed-by:
-
- 25 Aug, 2023 4 commits
-
-
Justin Stitt authored
When building with clang 18 I see the following warning: | drivers/gpu/drm/tiny/repaper.c:952:11: warning: cast to smaller integer | type 'enum repaper_model' from 'const void *' [-Wvoid-pointer-to-enum-cast] | 952 | model = (enum repaper_model)match; | This is due to the fact that `match` is a void* while `enum repaper_model` has the size of an int. Add uintptr_t cast to silence clang warning while also keeping enum cast for readability and consistency with other `model` assignment just a few lines below: | model = (enum repaper_model)spi_id->driver_data; Link: https://github.com/ClangBuiltLinux/linux/issues/1910Reported-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Justin Stitt <justinstitt@google.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230816-void-drivers-gpu-drm-tiny-repaper-v1-1-9d8d10f0d52f@google.com
-
Yue Haibing authored
These declarations are not implemented now, remove them. Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230817133754.36524-1-yuehaibing@huawei.com
-
Sui Jingfeng authored
Because the gma_irq_install() is call after psb_gem_mm_init() function, when psb_gem_mm_init() fails, the interrupt line haven't been allocated. Yet the gma_irq_uninstall() is called in the psb_driver_unload() function without checking if checking the irq is registered or not. The calltrace is appended as following: [ 20.539253] ioremap memtype_reserve failed -16 [ 20.543895] gma500 0000:00:02.0: Failure to map stolen base. [ 20.565049] ------------[ cut here ]------------ [ 20.565066] Trying to free already-free IRQ 16 [ 20.565087] WARNING: CPU: 1 PID: 381 at kernel/irq/manage.c:1893 free_irq+0x209/0x370 [ 20.565316] CPU: 1 PID: 381 Comm: systemd-udevd Tainted: G C 6.5.0-rc1+ #368 [ 20.565329] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./IMB-140D Plus, BIOS P1.10 11/18/2013 [ 20.565338] RIP: 0010:free_irq+0x209/0x370 [ 20.565357] Code: 41 5d 41 5e 41 5f 5d 31 d2 89 d1 89 d6 89 d7 41 89 d1 c3 cc cc cc cc 8b 75 d0 48 c7 c7 e0 77 12 9f 4c 89 4d c8 e8 57 fe f4 ff <0f> 0b 48 8b 75 c8 4c 89 f7 e8 29 f3 f1 00 49 8b 47 40 48 8b 40 78 [ 20.565369] RSP: 0018:ffffae3b40733808 EFLAGS: 00010046 [ 20.565382] RAX: 0000000000000000 RBX: ffff9f8082bfe000 RCX: 0000000000000000 [ 20.565390] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 20.565397] RBP: ffffae3b40733840 R08: 0000000000000000 R09: 0000000000000000 [ 20.565405] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f80871c3100 [ 20.565413] R13: ffff9f80835d3360 R14: ffff9f80835d32a4 R15: ffff9f80835d3200 [ 20.565424] FS: 00007f13d36458c0(0000) GS:ffff9f8138880000(0000) knlGS:0000000000000000 [ 20.565434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 20.565441] CR2: 00007f0d046f3f20 CR3: 0000000006c8c000 CR4: 00000000000006e0 [ 20.565450] Call Trace: [ 20.565458] <TASK> [ 20.565470] ? show_regs+0x72/0x90 [ 20.565488] ? free_irq+0x209/0x370 [ 20.565504] ? __warn+0x8d/0x160 [ 20.565520] ? free_irq+0x209/0x370 [ 20.565536] ? report_bug+0x1bb/0x1d0 [ 20.565555] ? handle_bug+0x46/0x90 [ 20.565572] ? exc_invalid_op+0x19/0x80 [ 20.565587] ? asm_exc_invalid_op+0x1b/0x20 [ 20.565607] ? free_irq+0x209/0x370 [ 20.565625] ? free_irq+0x209/0x370 [ 20.565644] gma_irq_uninstall+0x15b/0x1e0 [gma500_gfx] [ 20.565728] psb_driver_unload+0x27/0x190 [gma500_gfx] [ 20.565800] psb_pci_probe+0x5d2/0x790 [gma500_gfx] [ 20.565873] local_pci_probe+0x48/0xb0 [ 20.565892] pci_device_probe+0xc8/0x280 [ 20.565912] really_probe+0x1d2/0x440 [ 20.565929] __driver_probe_device+0x8a/0x190 [ 20.565944] driver_probe_device+0x23/0xd0 [ 20.565957] __driver_attach+0x10f/0x220 [ 20.565971] ? __pfx___driver_attach+0x10/0x10 [ 20.565984] bus_for_each_dev+0x7a/0xe0 [ 20.566002] driver_attach+0x1e/0x30 [ 20.566014] bus_add_driver+0x127/0x240 [ 20.566029] driver_register+0x64/0x140 [ 20.566043] ? __pfx_psb_init+0x10/0x10 [gma500_gfx] [ 20.566111] __pci_register_driver+0x68/0x80 [ 20.566128] psb_init+0x2c/0xff0 [gma500_gfx] [ 20.566194] do_one_initcall+0x46/0x330 [ 20.566214] ? kmalloc_trace+0x2a/0xb0 [ 20.566233] do_init_module+0x6a/0x270 [ 20.566250] load_module+0x207f/0x23a0 [ 20.566278] init_module_from_file+0x9c/0xf0 [ 20.566293] ? init_module_from_file+0x9c/0xf0 [ 20.566315] idempotent_init_module+0x184/0x240 [ 20.566335] __x64_sys_finit_module+0x64/0xd0 [ 20.566352] do_syscall_64+0x59/0x90 [ 20.566366] ? ksys_mmap_pgoff+0x123/0x270 [ 20.566378] ? __secure_computing+0x9b/0x110 [ 20.566392] ? exit_to_user_mode_prepare+0x39/0x190 [ 20.566406] ? syscall_exit_to_user_mode+0x2a/0x50 [ 20.566420] ? do_syscall_64+0x69/0x90 [ 20.566433] ? do_syscall_64+0x69/0x90 [ 20.566445] ? do_syscall_64+0x69/0x90 [ 20.566458] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 20.566472] RIP: 0033:0x7f13d351ea3d [ 20.566485] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 a3 0f 00 f7 d8 64 89 01 48 [ 20.566496] RSP: 002b:00007ffe566c1fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 20.566510] RAX: ffffffffffffffda RBX: 000055e66806eec0 RCX: 00007f13d351ea3d [ 20.566519] RDX: 0000000000000000 RSI: 00007f13d36d9441 RDI: 0000000000000010 [ 20.566527] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000002 [ 20.566535] R10: 0000000000000010 R11: 0000000000000246 R12: 00007f13d36d9441 [ 20.566543] R13: 000055e6681108c0 R14: 000055e66805ba70 R15: 000055e66819a9c0 [ 20.566559] </TASK> [ 20.566566] ---[ end trace 0000000000000000 ]--- Signed-off-by:
Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by:
-
Jorge Maidana authored
Remove identical duplicate block of macro definitions in drivers/gpu/drm/gma500/psb_drv.h. Signed-off-by:
Jorge Maidana <jorgem.linux@gmail.com> Signed-off-by:
-
- 23 Aug, 2023 1 commit
-
-
Danilo Krummrich authored
Currently, NO_PREFETCH is passed implicitly through drm_nouveau_gem_pushbuf_push::length and drm_nouveau_exec_push::va_len. Since this is a direct representation of how the HW is programmed it isn't really future proof for a uAPI. Hence, fix this up for the new uAPI and split up the va_len field of struct drm_nouveau_exec_push, such that we keep 32bit for va_len and 32bit for flags. For drm_nouveau_gem_pushbuf_push::length at least provide NOUVEAU_GEM_PUSHBUF_NO_PREFETCH to indicate the bit shift. While at it, fix up nv50_dma_push() as well, such that the caller doesn't need to encode the NO_PREFETCH flag into the length parameter. Signed-off-by:
Danilo Krummrich <dakr@redhat.com> Reviewed-by:
Faith Ekstrand <faith.ekstrand@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230823181746.3446-1-dakr@redhat.com
-
- 22 Aug, 2023 2 commits
-
-
Danilo Krummrich authored
Transfer the region pointer of a uvma to the new uvma(s) on re-map to prevent potential shader faults when the re-mapped uvma(s) are unmapped. Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230820222920.2344-1-dakr@redhat.com
-
Danilo Krummrich authored
If a sched job depends on a dma-fence from a job from the same GPU scheduler instance, but a different scheduler entity, the GPU scheduler does only wait for the particular job to be scheduled, rather than for the job to fully complete. This is due to the GPU scheduler assuming that there is a scheduler instance per ring. However, the current implementation, in order to avoid arbitrary amounts of kthreads, has a single scheduler instance while scheduler entities represent rings. As a workaround, set the DRM_SCHED_FENCE_DONT_PIPELINE for all out-fences in order to force the scheduler to wait for full job completion for dependent jobs from different entities and same scheduler instance. There is some work in progress [1] to address the issues of firmware schedulers; once it is in-tree the scheduler topology in Nouveau should be re-worked accordingly. [1] https://lore.kernel.org/dri-devel/20230801205103.627779-1-matthew.brost@intel.com/Signed-off-by:
Faith Ekstrand <faith.ekstrand@collaboralcom> Link: https://patchwork.freedesktop.org/patch/msgid/20230811010632.2473-1-dakr@redhat.com
-
- 21 Aug, 2023 4 commits
-
-
Daniel Stone authored
Since there's a lot of confusion around this, document both the rules and the best practices around negotiating, allocating, importing, and using buffers when crossing context/process/device/subsystem boundaries. This ties up all of dma-buf, formats and modifiers, and their usage. Signed-off-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
Simon Ser <contact@emersion.fr> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20230803154908.105124-4-daniels@collabora.com
-
Daniel Stone authored
Make it a little bit more clear what's going on and fix some formatting. Signed-off-by:
-
Ruan Jinjie authored
It is not possible for platform_get_irq_byname() to return 0. Use the return value from platform_get_irq_byname(). Signed-off-by:
Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Douglas Anderson authored
There's an obvious copy-paste error in the description of output_bus_cfg. Fix it. Fixes: f32df58a ("drm/bridge: Add the necessary bits to support bus format negotiation") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230817094808.1.I41b04c3a8305c9f1c17af886c327941c5136ca3b@changeid
-
- 16 Aug, 2023 2 commits
-
-
Diogo Ivo authored
The JDI LPM102A188A is a 2560x1800 IPS panel found in the Google Pixel C. This driver is based on the downstream GPLv2 driver released by Google written by Sean Paul [1], which was then adapted to the newer kernel APIs. [1]: https://android.googlesource.com/kernel/tegra/+/refs/heads/android-tegra-dragon-3.18-oreo/drivers/gpu/drm/panel/panel-jdi-lpm102a188a.cSigned-off-by:
Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Diogo Ivo authored
The LPM102A188A is a 10.2" 2560x1800 IPS panel found in the Google Pixel C. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
- 14 Aug, 2023 5 commits
-
-
David Heidelberg authored
Use the dev_err_probe() helper to simplify error handling during probe. This also handle scenario, when EDEFER is returned and useless error is printed. Fixes error: panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517 Signed-off-by:
David Heidelberg <david@ixit.cz> Reviewed-by:
-
David Heidelberg authored
Link is no longer functional and web.archive.org doesn't provide PDF with detail information. Some informations can be found from web.archive.org here: https://web.archive.org/web/20170629205602/http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheetSigned-off-by:
-
Thomas Weber authored
Add support for the Mitsubishi AA084XE01 panel which is an 8.4 inch XGA TFT-LCD module for industrial use. Link: https://www.mouser.fr/datasheet/2/274/aa084xe01_e-364171.pdfSigned-off-by:
Thomas Weber <thomas.weber@corscience.de> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
-
Miquel Raynal authored
Add Mitsubishi AA084XE01 8.4" XGA TFT LCD panel compatible string. Link: https://www.mouser.fr/datasheet/2/274/aa084xe01_e-364171.pdfSigned-off-by:
-
Liu Ying authored
Add the device link when panel bridge is attached and delete the link when panel bridge is detached. The drm device is the consumer while the panel device is the supplier. This makes sure that the drm device suspends eariler and resumes later than the panel device, hence resolves problems where the order is reversed, like the problematic case mentioned in the below link. Link: https://lore.kernel.org/lkml/CAPDyKFr0XjrU_udKoUKQ_q8RWaUkyqL+8fV-7s1CTMqi7u3-Rg@mail.gmail.com/T/Suggested-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Liu Ying <victor.liu@nxp.com> Reviewed-by:
-
- 12 Aug, 2023 2 commits
-
-
Jonas Karlman authored
Add missing call to crtc reset helper to properly vblank reset. Also move vop2_crtc_reset and call vop2_crtc_destroy_state to simplify and remove duplicated code. Fixes: 604be855 ("drm/rockchip: Add VOP2 driver") Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230621223311.2239547-6-jonas@kwiboo.se
-
Jonas Karlman authored
It's possible for users to try to duplicate the CRTC state even when the state doesn't exist. drm_atomic_helper_crtc_duplicate_state() (and other users of __drm_atomic_helper_crtc_duplicate_state()) already guard this with a WARN_ON() instead of crashing, so let's do that here too. Fixes: 604be855 ("drm/rockchip: Add VOP2 driver") Signed-off-by:
-
