- 20 Jan, 2023 8 commits
-
-
Arnd Bergmann authored
The PXA palmld machine was removed, so the pata driver is no longer used and can be removed. There is a chance that some of this code might be useful for turning some of the other PXA PCMCIA host drivers into PATA drivers, but it's clear that it would not work unmodified, and it seems unlikely that someone would do this work. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Acked-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
The PXA tosa machine is removed, so this driver is no longer in use. Cc: linux-pm@vger.kernel.org Acked-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by:
-
Arnd Bergmann authored
The PXA z2 platform is gone, and this driver is now orphaned. Cc: linux-pm@vger.kernel.org Cc: Peter Edwards <sweetlilmre@gmail.com> Acked-by:
-
Arnd Bergmann authored
pxa3xx is now DT-only, and the remaining pxa2xx board files only use a subset of the possible devices, so remove all definitions that are not referenced any more. Acked-by:
-
Arnd Bergmann authored
This was only used by the cm-x300 board, which is now gone. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Arnd Bergmann authored
irda support was removed a long time ago, so stop registering the devices from the pxa machine. Acked-by:
-
Arnd Bergmann authored
There is currently no devicetree support for pxa930 or pxa935 SoCs, and no board files remain. As it seems unlikely that anyone is going to add DT support soon, let's drop the SoC specific code now. Acked-by:
-
Arnd Bergmann authored
The majority of all pxa board files has not been touched in a long time, and no users have spoken up in favor of keeping them around. This leaves only support for the platforms that were already converted to DT, as well as the gumstix and spitz/akita/borzoi machines that work in qemu and can still be converted to DT later. Cc: Ales Bardorfer <ales@i-tech.si> Cc: Ales Snuparek <snuparek@atlas.cz> Cc: Alex Osborne <ato@meshy.org> Cc: Alex Osborne <bobofdoom@gmail.com> Cc: Dirk Opfer <dirk@opfer-online.de> Cc: Ian Molton <spyro@f2s.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Michael Petchkovsky <mkpetch@internode.on.net> Cc: Nick Bane <nick@cecomputing.co.uk> Cc: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Tomas Cech <sleep_walker@suse.cz> Acked-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by:
-
- 16 Jan, 2023 30 commits
-
-
Arnd Bergmann authored
The s3c24xx bast platform was removed, so this driver has no users any more and can be removed as well. Acked-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
The s3c24xx SoC platform was completely removed, as were most of the s3c64xx based board files, leaving only the DT based machines as well as the MACH_WLF_CRAGG_6410 machine. All other board specific ASoC driver can can now be recycled. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
CONFIG_SAMSUNG_PM_DEBUG was only used on s3c24xx because of the DEBUG_S3C24XX_UART dependency. Since s3c24xx is now gone, and nobody ever noticed this option being missing from s3c64xx, it can be safely removed as well. Reviewed-by:
-
Arnd Bergmann authored
The s3c24xx platform was removed,s o there are no remaining users for its spi driver. Reviewed-by:
-
Arnd Bergmann authored
The s3c24xx platform was removed, so this driver has no remaining users. Acked-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Arnd Bergmann authored
The s3c24xx SoC support and its adc driver was removed, so this driver has no remaining users. Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by:
-
Arnd Bergmann authored
The s3c24xx platform was removed, so the framebuffer driver is no longer needed. Reviewed-by:
-
Arnd Bergmann authored
All s3c24xx platforms were removed, so these five drivers are all obsolete now. Reviewed-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
The s3c24xx platform was removed and this driver is no longer needed. Reviewed-by:
-
Arnd Bergmann authored
The s3c24xx platform is gone, so both the udc and hsudc drivers can be removed as well. Reviewed-by:
-
Arnd Bergmann authored
The s3c24xx platform is gone, so the led driver can be removed as well. Reviewed-by:
-
Arnd Bergmann authored
With the s3c24xx clk driver gone, the portions of the pll driver for it can also be removed. Suggested-by:
Chanwoo Choi <cwchoi00@gmail.com> Link: https://lore.kernel.org/linux-arm-kernel/0e0eff12-d8ea-72e9-d135-4259dda9a750@gmail.com/Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Arnd Bergmann authored
The s3c24xx platform is gone, so the clk driver can be removed as well. Acked-by:
Stephen Boyd <sboyd@kernel.org> Reviewed-by:
-
Arnd Bergmann authored
The s3c24xx platform is gone, so this driver can be removed as well. Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
This device was only used by the smdk6410 board file that is now gone, so the driver can be removed as well. Reviewed-by:
-
Arnd Bergmann authored
The s3c adc driver was removed along with the s3c24xx platform, so the hwmon driver is orphaned and can be removed. Acked-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Arnd Bergmann authored
The s3c-adc driver is removed along with the s3c24xx platform, so the battery driver is no longer needed either. Reviewed-by:
-
Arnd Bergmann authored
No board file and no dts file references the s3c6400 now, it's only s3c6410, so remove the final bits as well. Reviewed-by:
-
Arnd Bergmann authored
Following down the now unused symbols and header files, some additional content can be dropped that is used by neither the s3c64xx DT support nor the crag6410 board. Acked-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
This driver could not be enabled on s3c64xx for a long time because of the ARCH_MULTIPLATFORM dependency, so remove it. Acked-by:
-
Arnd Bergmann authored
All traditional board files except for MACH_WLF_CRAGG_6410 were marked as unused, so remove them now. Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Maurus Cuelenaere <mcuelenaere@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Reviewed-by:
-
Arnd Bergmann authored
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks. Acked-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by:
Miquel Raynal <miquel.raynal@bootlin.com> Acked-by:
-
Arnd Bergmann authored
The platform was deprecated in commit 6a5e69c7 ("ARM: s3c: mark as deprecated and schedule removal") and can be removed. This includes all files that are exclusively for s3c24xx and not shared with s3c64xx, as well as the glue logic in Kconfig and the maintainer file entries. Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Christer Weinigel <christer@weinigel.se> Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Simtec Linux Team <linux@simtec.co.uk> Cc: openmoko-kernel@lists.openmoko.org Acked-by:
Heiko Stuebner <heiko@sntech.de> Acked-by:
-
Arnd Bergmann authored
Assuming that we don't actually want the old-style pm-mmp2.c and pm-pxa910.c implementation, all these files can go away as well. Signed-off-by: -
Arnd Bergmann authored
Since all board support is now gone, a lot of code in the platform is no longer called and can be removed as well. The remaining parts are: * The interrupt numbers for pxa910 are still needed for the power management support. * The 'mfp' device is still statically initialized from platform code, though this could be moved into the pinctrl code * The CPU identification code is used for the cpu_is_mmp*() macros. Signed-off-by: -
Arnd Bergmann authored
The MMP_SRAM code is no longer used by the tdma driver because the Kconfig symbol is not selected, so remove it along with its former callsite. Acked-By:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
The old-style board files were marked as 'unused' a while ago and can now be removed for good, leaving only devicetree based boot support. Signed-off-by: -
Arnd Bergmann authored
The behavior of the MMP platform code depends on whether the CPU_PXA168/CPU_PXA910/CPU_MMP2 symbols are enabled or not. I believe the intention here was that these can be left disabled for a pure DT-only build, but it's not clear if that actually works. At the minimum, the cpu_is_pxa168() and cpu_is_pxa910() checks behave differently, which causes changes in the power management code. For the moment, make the behavior depend on whether CONFIG_ATAGS is set or not, to make it easier to bisect the removal of the old code later. Signed-off-by: -
Arnd Bergmann authored
The sa11xx platform has two cpufreq drivers, one for the older StrongARM1100 SoC, and a second one for StrongARM1110. After the removal of most SA1100 based machines, this driver is unused, and only the sa1110-cpufreq driver remains. Acked-by:
-
Arnd Bergmann authored
IRDA support is long gone, so there is no need to declare the platform device data. See-also: d64c2a76 ("staging: irda: remove the irda network stack and drivers") Signed-off-by:
-
- 12 Jan, 2023 2 commits
-
-
Arnd Bergmann authored
The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and Simpad machines were all marked as unused as there are no known users left. Remove all of these, along with references to them in defconfig files and drivers. Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600 and Jornada 720, each of which had one person still using them, with Collie also being supported in Qemu. Cc: Peter Chubb <peter.chubb@unsw.edu.au> Cc: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de> Acked-by:
Lee Jones <lee@kernel.org> Acked-by:
-
Arnd Bergmann authored
Stefan is still trying to get this machine working again, so it won't be removed in this round. Cc: Stefan Lehner <stefan-lehner@aon.at> Signed-off-by:
-
