The next patch adds a GSI register field that is only valid starting
at IPA v3.5.1.  Create "gsi_v3.5.1.c" from "gsi_v3.1.c", changing
only the name of the public regs structure it defines.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add definitions of the offsets for IRQ-related GSI registers.  Use
gsi_reg() rather than the corresponding GSI_CNTXT_*_OFFSET() macros
to get the offsets for these registers, and get rid of the macros.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add definitions of the offsets and strides for registers whose
offset depends on an event ring ID, and use gsi_reg() and its
returned value to determine offsets for these registers.  Get
rid of the corresponding GSI_EV_CH_E_*_OFFSET() macros.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Continue populating with GSI register definitions, adding remaining
registers whose offset depends on a channel ID.  Use gsi_reg() and
reg_n_offset() to determine offsets for those registers, and get rid
of the corresponding GSI_CH_C_*_OFFSET() macros.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a new register definition file in the "reg" subdirectory,
and begin populating it with GSI register definitions based on IPA
version.  The GSI registers haven't changed much, so several IPA
versions can share the same GSI register definitions.

As with IPA registers, an array of pointers indexed by GSI register ID
refers to these register definitions, and a new "regs" field in the
GSI structure is initialized in gsi_reg_init() to refer to register
information based on the IPA version (though for now there's only
one).  The new function gsi_reg() returns register information for
a given GSI register, and the result can be used to look up that
register's offset.

This patch is meant only to put the infrastructure in place, so only
eon register (CH_C_QOS) is defined for each version, and only the
offset and stride are defined for that register.  Use new function
gsi_reg() to look up that register's information to get its offset,
This makes the GSI_CH_C_QOS_OFFSET() unnecessary, so get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a new gsi_reg_id enumerated type, which identifies each GSI
register with a symbolic identifier.

Create a function that indicates whether a register ID is valid.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a new source file "gsi_reg.c", and in it, introduce a new
function to encapsulate initializing GSI registers, including
looking up and I/O mapping their memory.

Create gsi_reg_exit() as the inverse of the init function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If TCA_STAB attribute is malformed, qdisc_get_stab() returns
an error, and we end up calling ops->destroy() while ops->init()
has not been called yet.

While we are at it, call qdisc_put_stab() after ops->destroy().

Fixes: 1f62879e ("net/sched: make stab available before ops->init() call")
Reported-by: syzbot+d44d88f1d11e6ca8576b@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for PHC and timestamping operations for the lan8841 PHY.
PTP 1-step and 2-step modes are supported, over Ethernet and UDP both
ipv4 and ipv6.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
devlink: params cleanups and devl_param_driverinit_value_get() fix

The primary motivation of this patchset is the patch #6, which fixes an
issue introduced by 075935f0 ("devlink: protect devlink param list
by instance lock") and reported by Kim Phillips <kim.phillips@amd.com>
(https://lore.kernel.org/netdev/719de4f0-76ac-e8b9-38a9-167ae239efc7@amd.com/)
and my colleagues doing mlx5 driver regression testing.

The basis idea is that devl_param_driverinit_value_get() could be
possible to the called without holding devlink intance lock in
most of the cases (all existing ones in the current codebase),
which would fix some mlx5 flows where the lock is not held.

To achieve that, make sure that the param value does not change between
reloads with patch #2.

Also, convert the param list to xarray which removes the worry about
list_head consistency when doing lockless lookup.

The rest of the patches are doing some small related cleanup of things
that poke me in the eye during the work.

---
v1->v2:
- a small bug was fixed in patch #2, the rest of the code stays the same
  so I left review/ack tags attached to them
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver calling devl_param_driverinit_value_set() has to hold devlink
instance lock while doing that. Put an assertion there.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the driver maintains following basic sane behavior, the
devl_param_driverinit_value_get() function could be called without
holding instance lock:

1) Driver ensures a call to devl_param_driverinit_value_get() cannot
   race with registering/unregistering the parameter with
   the same parameter ID.
2) Driver ensures a call to devl_param_driverinit_value_get() cannot
   race with devl_param_driverinit_value_set() call with
   the same parameter ID.
3) Driver ensures a call to devl_param_driverinit_value_get() cannot
   race with reload operation.

By the nature of params usage, these requirements should be
trivially achievable. If the driver for some off reason
is not able to comply, it has to take the devlink->lock while
calling devl_param_driverinit_value_get().

Remove the lock assertion and add comment describing
the locking requirements.

This fixes a splat in mlx5 driver introduced by the commit
referenced in the "Fixes" tag.

Lore: https://lore.kernel.org/netdev/719de4f0-76ac-e8b9-38a9-167ae239efc7@amd.com/Reported-by: Kim Phillips <kim.phillips@amd.com>
Fixes: 075935f0 ("devlink: protect devlink param list by instance lock")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Loose the linked list for params and use xarray instead.

Note that this is required to be eventually possible to call
devl_param_driverinit_value_get() without holding instance lock.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As xarray has an iterator helper that allows to start from specified
index, use this directly and avoid repeated iteration from 0.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Probably due to copy-paste error, the name of the arg is "init_val"
which is misleading, as the pointer is used to point to struct where to
store the current value. Rename it to "val" and change the arg comment
a bit on the way.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driverinit param purpose is to serve the driver during init/reload
time to provide a value, either default or set by user.

Make sure that driver does not read value updated by user before the
reload is performed. Hold the new value in a separate struct and switch
it during reload.

Note that this is required to be eventually possible to call
devl_param_driverinit_value_get() without holding instance lock.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

No need to treat string params any different comparing to other types.
Rely on the struct assign to copy the whole struct, including the
string.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the following modes to the nfp driver:

	NFP_MEDIA_10GBASE_LR
	NFP_MEDIA_25GBASE_LR
	NFP_MEDIA_25GBASE_ER

These modes are supported by the hardware and,
support for them was recently added to firmware.
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NL_SET_ERR_MSG_MOD inserts the KBUILD_MODNAME and a ':' before the actual
extended error message. The devlink feature hasn't been able to be compiled
as a module since commit f4b6bcc7 ("net: devlink: turn devlink into a
built-in").

Stop using NL_SET_ERR_MSG_MOD, and just use the base NL_SET_ERR_MSG. This
aligns the extended error messages better with the NL_SET_ERR_MSG_ATTR
messages as well.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

rds_rm_zerocopy_callback() uses list_add_tail() with swapped
arguments. This links the list head with the new entry, losing
the references to the remaining part of the list.

Fixes: 9426bbc6 ("rds: use list structure to track information for zerocopy completion notification")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-02-09 (i40e)

Jan removes i40e_status from the driver; replacing them with standard
kernel error codes.

Kees Cook replaces 0-length array with flexible array.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  net/i40e: Replace 0-length array with flexible array
  i40e: use ERR_PTR error print in i40e messages
  i40e: use int for i40e_status
  i40e: Remove string printing for i40e_status
  i40e: Remove unused i40e status codes
====================

Link: https://lore.kernel.org/r/20230209172536.3595838-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alexandra Winter says:

====================
s390/net: updates 2023-02-06

Just maintenance patches, no functional changes.
If you disagree with patch 4, we can leave it out.
We prefer scnprintf, but no strong opinion.
====================

Link: https://lore.kernel.org/r/20230209110424.1707501-1-wintera@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This LWN article explains the rationale for this change
https: //lwn.net/Articles/69419/
Ie. snprintf() returns what *would* be the resulting length,
while scnprintf() returns the actual length.
Reported-by: Jules Irenge <jbi.octave@gmail.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Following the advice of the Documentation/filesystems/sysfs.rst.
All sysfs related show()-functions should only use sysfs_emit() or
sysfs_emit_at() when formatting the value to be returned to user space.
Reported-by: Jules Irenge <jbi.octave@gmail.com>
Reported-by: Joe Perches <joe@perches.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use INET6_ADDRSTRLEN constant with size of 48 which be used for char arrays
storing ip addresses (for IPv4 and IPv6)
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Get rid of multiple smatch warnings, like:
warn: inconsistent indenting
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Yoshihiro Shimoda says:

====================
net: renesas: rswitch: Improve TX timestamp accuracy

The patch [[123]/4] are minor refacoring for readability.
The patch [4/4] is for improving TX timestamp accuracy.
To improve the accuracy, it requires refactoring so that this is not
a fixed patch.

v2: https://lore.kernel.org/all/20230208235721.2336249-1-yoshihiro.shimoda.uh@renesas.com/
v1: https://lore.kernel.org/all/20230208073445.2317192-1-yoshihiro.shimoda.uh@renesas.com/
====================

Link: https://lore.kernel.org/r/20230209081741.2536034-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the previous code, TX timestamp accuracy was bad because the irq
handler got the timestamp from the timestamp register at that time.

This hardware has "Timestamp capture" feature which can store
each TX timestamp into the timestamp descriptors. To improve
TX timestamp accuracy, implement timestamp descriptors' handling.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In the previous code, the gptp flag was completely related to
the !dir_tx in struct rswitch_gwca_queue because
rswitch_gwca_queue_alloc() was called below:

< In rswitch_txdmac_alloc() >
err = rswitch_gwca_queue_alloc(ndev, priv, rdev->tx_queue, true, false,
			      TX_RING_SIZE);
So, dir_tx = true, and gptp = false.

< In rswitch_rxdmac_alloc() >
err = rswitch_gwca_queue_alloc(ndev, priv, rdev->rx_queue, false, true,
			      RX_RING_SIZE);
So, dir_tx = false, and gptp = true.

In the future, a new queue handling for timestamp will be implemented
and this gptp flag is confusable. So, remove the gptp flag.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To improve readability, move linkfix related variables to
struct rswitch_gwca. Also, rename function names "desc" with "linkfix".
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To add a new ring which is really related to timestamp (ts_ring)
in the future, rename the following members to improve readability:

    ring --> tx_ring
    ts_ring --> rx_ring
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This function always returns success.  We need to preserve the error
code before setting rx_ring->page_pool = NULL.

Fixes: 850b9711 ("net: libwx: Allocate Rx and Tx resources")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y+T4aoefc1XWvGYb@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A new user of MSCC_OCELOT_SWITCH_LIB was added, bringing back an old
link failure that was fixed with e5f31552 ("ethernet: fix
PTP_1588_CLOCK dependencies"):

x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_ptp_enable':
ocelot_ptp.c:(.text+0x8ee): undefined reference to `ptp_find_pin'
x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_get_ts_info':
ocelot_ptp.c:(.text+0xd5d): undefined reference to `ptp_clock_index'
x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_init_timestamp':
ocelot_ptp.c:(.text+0x15ca): undefined reference to `ptp_clock_register'
x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_deinit_timestamp':
ocelot_ptp.c:(.text+0x16b7): undefined reference to `ptp_clock_unregister'

Add the same PTP dependency here, as well as in the MSCC_OCELOT_SWITCH_LIB
symbol itself to make it more obvious what is going on when the next
driver selects it.

Fixes: 3d7316ac ("net: dsa: ocelot: add external ocelot switch control")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20230209124435.1317781-1-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
bridge: mcast: Preparations for VXLAN MDB

This patchset contains small preparations for VXLAN MDB that were split
from this RFC [1]. Tested using existing bridge MDB forwarding
selftests.

[1] https://lore.kernel.org/netdev/20230204170801.3897900-1-idosch@nvidia.com/
====================

Link: https://lore.kernel.org/r/20230209071852.613102-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The kernel maintains three markers for the MDB dump:

1. The last bridge device from which the MDB was dumped.
2. The last MDB entry from which the MDB was dumped.
3. The last port-group entry that was dumped.

Add test cases for large scale MDB dump to make sure that all the
configured entries are dumped and that the markers are used correctly.

Specifically, create 2 bridges with 32 ports and add 256 MDB entries in
which all the ports are member of. Test that each bridge reports 8192
(256 * 32) permanent entries. Do that with IPv4, IPv6 and L2 MDB
entries.

On my system, MDB dump of the above is contained in about 50 netlink
messages.

Example output:

 # ./bridge_mdb.sh
 [...]
 INFO: # Large scale dump tests
 TEST: IPv4 large scale dump tests                                   [ OK ]
 TEST: IPv6 large scale dump tests                                   [ OK ]
 TEST: L2 large scale dump tests                                     [ OK ]
 [...]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Future patches are going to move parts of the bridge MDB code to the
common rtnetlink code in preparation for VXLAN MDB support. To
facilitate code sharing between both drivers, move the validation of the
top level attributes in RTM_{NEW,DEL}MDB messages to a policy that will
eventually be moved to the rtnetlink code.

Use 'NLA_NESTED' for 'MDBA_SET_ENTRY_ATTRS' instead of
NLA_POLICY_NESTED() as this attribute is going to be validated using
different policies in the underlying drivers.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The purpose of the sequence generation counter in the netlink callback
is to identify if a multipart dump is consistent or not by calling
nl_dump_check_consistent() whenever a message is generated.

The function is not invoked by the MDB code, rendering the sequence
generation counter assignment pointless. Remove it.

Note that even if the function was invoked, we still could not
accurately determine if the dump is consistent or not, as there is no
sequence generation counter for MDB entries, unlike nexthop objects, for
example.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

'MDB_PG_FLAGS_PERMANENT' and 'MDB_PERMANENT' happen to have the same
value, but the latter is uAPI and cannot change, so use it when dumping
an MDB entry.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-net-next-2023-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Luiz Augusto von Dentz says:

====================
pull-request: bluetooth-next

 - Add new PID/VID 0489:e0f2 for MT7921
 - Add VID:PID 13d3:3529 for Realtek RTL8821CE
 - Add CIS feature bits to controller information
 - Set Per Platform Antenna Gain(PPAG) for Intel controllers

* tag 'for-net-next-2023-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next:
  Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)
  Bluetooth: Make sure LE create conn cancel is sent when timeout
  Bluetooth: Free potentially unfreed SCO connection
  Bluetooth: hci_qca: get wakeup status from serdev device handle
  Bluetooth: L2CAP: Fix potential user-after-free
  Bluetooth: MGMT: add CIS feature bits to controller information
  Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds
  Bluetooth: HCI: Replace zero-length arrays with flexible-array members
  Bluetooth: qca: Fix sparse warnings
  Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE
  Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921
  Bluetooth: Fix issue with Actions Semi ATS2851 based devices
====================

Link: https://lore.kernel.org/r/20230209234922.3756173-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

====================
pull-request: bpf-next 2023-02-11

We've added 96 non-merge commits during the last 14 day(s) which contain
a total of 152 files changed, 4884 insertions(+), 962 deletions(-).

There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c
between commit 5b246e53 ("ice: split probe into smaller functions")
from the net-next tree and commit 66c0e13a ("drivers: net: turn on
XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev()
is otherwise there a 2nd time, and add XDP features to the existing
ice_cfg_netdev() one:

        [...]
        ice_set_netdev_features(netdev);
        netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
                               NETDEV_XDP_ACT_XSK_ZEROCOPY;
        ice_set_ops(netdev);
        [...]

Stephen's merge conflict mail:
https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/

The main changes are:

1) Add support for BPF trampoline on s390x which finally allows to remove many
   test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich.

2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski.

3) Add capability to export the XDP features supported by the NIC.
   Along with that, add a XDP compliance test tool,
   from Lorenzo Bianconi & Marek Majtyka.

4) Add __bpf_kfunc tag for marking kernel functions as kfuncs,
   from David Vernet.

5) Add a deep dive documentation about the verifier's register
   liveness tracking algorithm, from Eduard Zingerman.

6) Fix and follow-up cleanups for resolve_btfids to be compiled
   as a host program to avoid cross compile issues,
   from Jiri Olsa & Ian Rogers.

7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted
   when testing on different NICs, from Jesper Dangaard Brouer.

8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang.

9) Extend libbpf to add an option for when the perf buffer should
   wake up, from Jon Doron.

10) Follow-up fix on xdp_metadata selftest to just consume on TX
    completion, from Stanislav Fomichev.

11) Extend the kfuncs.rst document with description on kfunc
    lifecycle & stability expectations, from David Vernet.

12) Fix bpftool prog profile to skip attaching to offline CPUs,
    from Tonghao Zhang.

====================

Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>