- 02 Aug, 2022 40 commits
-
-
Logan Gunthorpe authored
Now that prepare_to_wait() isn't in the way, move read_sequcount_begin() into make_stripe_request(). No functional changes intended. Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by:
Song Liu <song@kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Logan Gunthorpe authored
prepare_to_wait() can be reasonably called after schedule instead of setting a flag and preparing in the next loop iteration. This means that prepare_to_wait() will be called before read_seqcount_begin(), but there shouldn't be any reason that the order matters here. On the first iteration of the loop prepare_to_wait() is already called first. Signed-off-by:
-
Logan Gunthorpe authored
Factor out the inner loop of raid5_make_request() into it's own helper called make_stripe_request(). The helper returns a number of statuses: SUCCESS, RETRY, SCHEDULE_AND_RETRY and FAIL. This makes the code a bit easier to understand and allows the SCHEDULE_AND_RETRY path to be made common. A context structure is added to contain do_flush. It will be used more in subsequent patches for state that needs to be kept outside the loop. No functional changes intended. This will be cleaned up further in subsequent patches to untangle the gen_lock and do_prepare logic further. Signed-off-by:
-
Logan Gunthorpe authored
Both uses of find_stripe() require a fairly complicated dance to increment the reference count. Move this into a common find_get_stripe() helper. No functional changes intended. Signed-off-by:
-
Logan Gunthorpe authored
stripe_add_to_batch_list() is better done in the loop in make_request instead of inside add_stripe_bio(). This is clearer and allows for storing the batch_head state outside the loop in a subsequent patch. The call to add_stripe_bio() in retry_aligned_read() is for read and batching only applies to write. So it's impossible for batching to happen at that call site. No functional changes intended. Signed-off-by:
-
Logan Gunthorpe authored
Break immediately if raid5_get_active_stripe() returns NULL and deindent the rest of the loop. Annotate this check with an unlikely(). This makes the code easier to read and reduces the indentation level. No functional changes intended. Signed-off-by:
-
Logan Gunthorpe authored
There are a few uses of an ugly ternary operator in raid5_make_request() to check if a sector is a head of a reshape sector. Factor this out into a simple helper called ahead_of_reshape(). No functional changes intended. Suggested-by:
-
Logan Gunthorpe authored
The check in raid5_make_request differs very slightly from the logic that causes it to block lower down. This likely does not cause a bug as the check is fuzzy anyway (as reshape may move on between the first check and the subsequent check). However, make it consistent so it can be cleaned up in a subsequent patch. The condition which causes the schedule is: !(mddev->reshape_backwards ? logical_sector < conf->reshape_progress : logical_sector >= conf->reshape_progress) && (mddev->reshape_backwards ? logical_sector < conf->reshape_safe : logical_sector >= conf->reshape_safe) The condition that causes the early bailout is made to match this. Signed-off-by:
-
Guoqing Jiang authored
Since the bug which commit 8b48ec23 ("md: don't unregister sync_thread with reconfig_mutex held") fixed is related with action_store path, other callers which reap sync_thread didn't need to be changed. Let's pull md_unregister_thread from md_reap_sync_thread, then fix previous bug with belows. 1. unlock mddev before md_reap_sync_thread in action_store. 2. save reshape_position before unlock, then restore it to ensure position not changed accidentally by others. Signed-off-by:
-
Chris Webb authored
Boot-time assembly of arrays with md= command-line arguments breaks when CONFIG_BLOCK_LEGACY_AUTOLOAD is unset. md_setup_drive() in md-autodetect.c calls blkdev_get_by_dev(), assuming this implicitly creates the block device. Fix this by attempting to md_alloc() the array first. As in the probe path, ignore any error as failure is caught by blkdev_get_by_dev() anyway. Signed-off-by:
Chris Webb <chris@arachsys.com> Reviewed-by:
-
Logan Gunthorpe authored
The mdadm test 07layouts randomly produces a kernel hung task deadlock. The deadlock is caused by the suspend_lo/suspend_hi files being set by the mdadm background process during reshape and not being cleared because the process hangs. (Leaving aside the issue of the fragility of freezing kernel tasks by buggy userspace processes...) When the background mdadm process hangs it, is waiting (without a timeout) on a change to the sync_completed file signalling that the reshape has completed. The process is woken up a couple times when the reshape finishes but it is woken up before MD_RECOVERY_RUNNING is cleared so sync_completed_show() reports 0 instead of "none". To fix this, notify the sysfs file in md_reap_sync_thread() after MD_RECOVERY_RUNNING has been cleared. This wakes up mdadm and causes it to continue and write to suspend_lo/suspend_hi to allow IO to continue. Signed-off-by:
-
Logan Gunthorpe authored
The 07layouts test in mdadm fails on some systems. The failure presents itself as the backup file not being removed before the next layout is grown into: mdadm: /dev/md0: cannot create backup file /tmp/md-test-backup: File exists This is because the background mdadm process, which is responsible for cleaning up this backup file gets into an infinite loop waiting for the reshape to start. mdadm checks the mdstat file if a reshape is going and, if it is not, it waits for an event on the file or times out in 5 seconds. On faster machines, the reshape may complete before the 5 seconds times out, and thus the background mdadm process loops waiting for a reshape to start that has already occurred. mdadm reads the mdstat file to start, but mdstat does not report that the reshape has begun, even though it has indeed begun. So the mdstat_wait() call (in mdadm) which polls on the mdstat file won't ever return until timing out. The reason mdstat reports the reshape has started is due to an issue in status_resync(). recovery_active is subtracted from curr_resync which will result in a value of zero for the first chunk of reshaped data, and the resulting read will report no reshape in progress. To fix this, if "resync - recovery_active" is an overloaded value, force the value to be MD_RESYNC_ACTIVE so the code reports a resync in progress. Signed-off-by: -
Logan Gunthorpe authored
Comments in the code document special values used for mddev->curr_resync. Make this clearer by using an enum to label these values. The only functional change is a couple places use the wrong comparison operator that implied 3 is another special value. They are all fixed to imply that 3 or greater is an active resync. Signed-off-by:
-
Logan Gunthorpe authored
radix_tree_lookup_slot() and radix_tree_replace_slot() API expect the slot returned and looked up to be marked with __rcu. Otherwise sparse warnings are generated: drivers/md/raid5-cache.c:2939:23: warning: incorrect type in assignment (different address spaces) drivers/md/raid5-cache.c:2939:23: expected void **pslot drivers/md/raid5-cache.c:2939:23: got void [noderef] __rcu ** Signed-off-by:
-
Logan Gunthorpe authored
A NULL pointer dereferlence on conf->log is seen randomly with the mdadm test 21raid5cache. Kasan reporst: BUG: KASAN: null-ptr-deref in r5l_reclaimable_space+0xf5/0x140 Read of size 8 at addr 0000000000000860 by task md0_reclaim/3086 Call Trace: dump_stack_lvl+0x5a/0x74 kasan_report.cold+0x5f/0x1a9 __asan_load8+0x69/0x90 r5l_reclaimable_space+0xf5/0x140 r5l_do_reclaim+0xf4/0x5e0 r5l_reclaim_thread+0x69/0x3b0 md_thread+0x1a2/0x2c0 kthread+0x177/0x1b0 ret_from_fork+0x22/0x30 This is caused by conf->log being cleared in r5l_exit_log() before stopping the reclaim thread. To fix this, clear conf->log after the reclaim_thread is unregistered and after flushing disable_writeback_work. Signed-off-by:
-
Logan Gunthorpe authored
The only place that uses RCU to access conf->log is in r5l_log_disk_error(). This function is mostly used in the IO path and once with mddev_lock() held in raid5_change_consistency_policy(). It is known that the IO will be suspended before the log is freed and r5l_log_exit() is called with the mddev_lock() held. This should mean that conf->log can not be freed while the function is being called, so the RCU protection is not necessary. Drop the rcu_read_lock() as well as the synchronize_rcu() and rcu_assign_pointer() usage. Signed-off-by:
-
Logan Gunthorpe authored
The mddev->lock spinlock doesn't protect against the removal of conf->log in r5l_exit_log() so conf->log may be freed before it is used. To fix this, take the mddev_lock() insteaad of the mddev->lock spinlock. Signed-off-by:
-
Logan Gunthorpe authored
The raid5-cache code relies on there being no IO in flight when log_exit() is called. There are two places where this is not guaranteed so add mddev_suspend() and mddev_resume() calls to these sites. The site in raid5_change_consistency_policy() is in the error path, and another similar call site already has suspend/resume calls just below it; so it should be equally safe to make that change here. There is one remaining site in raid5_remove_disk() that we call log_exit() without suspending the array. Unfortunately, as the comment stated, we cannot call mddev_suspend from raid5d. Signed-off-by:
-
Logan Gunthorpe authored
ppl_handle_flush_request() takes an struct r5log argument but doesn't use it. It has no buisiness taking this argument as it is only used by raid5-cache and has no way to derference it anyway. Remove the argument. No functional changes intended. Signed-off-by:
-
Logan Gunthorpe authored
extern is not necessary and recommended against when defining prototype functions in headers. checkpatch.pl complains about these. So remove them. Signed-off-by:
-
Song Liu authored
Add link to patchwork: https://patchwork.kernel.org/project/linux-raid/list/Signed-off-by:
-
Lars Ellenberg authored
We usually do all our bitmap IO in units of PAGE_SIZE. With very small or oddly sized external meta data, or with PAGE_SIZE != 4k, it can happen that our last on-disk bitmap page is not fully PAGE_SIZE aligned, so we may need to adjust the size of the IO. We used to do that with min_t(unsigned int, PAGE_SIZE, last_allowed_sector - current_offset); And for just the right diff, (unsigned int)(diff) will result in 0. A bio of length 0 will correctly be rejected with an IO error (and some scary WARN_ON_ONCE()) by the scsi layer. Do the calculation properly. Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20220622204932.196830-1-christoph.boehmwalder@linbit.comSigned-off-by:
-
Linus Torvalds authored
Merge tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Refactor DM core's mempool allocation so that it clearer by not being split acorss files. - Improve DM core's BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling. - Optimize DM core's more common bio splitting by eliminating the use of bio cloning with bio_split+bio_chain. Shift that cloning cost to the relatively unlikely dm_io requeue case that only occurs during error handling. Introduces dm_io_rewind() that will clone a bio that reflects the subset of the original bio that must be requeued. - Remove DM core's dm_table_get_num_targets() wrapper and audit all dm_table_get_target() callers. - Fix potential for OOM with DM writecache target by setting a default MAX_WRITEBACK_JOBS (set to 256MiB or 1/16 of total system memory, whichever is smaller). - Fix DM writecache target's stats that are reported through DM-specific table info. - Fix use-after-free crash in dm_sm_register_threshold_callback(). - Refine DM core's Persistent Reservation handling in preparation for broader work Mike Christie is doing to add compatibility with Microsoft Windows Failover Cluster. - Fix various KASAN reported bugs in the DM raid target. - Fix DM raid target crash due to md_handle_request() bio splitting that recurses to block core without properly initializing the bio's bi_dev. - Fix some code comment typos and fix some Documentation formatting. * tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits) dm: fix dm-raid crash if md_handle_request() splits bio dm raid: fix address sanitizer warning in raid_resume dm raid: fix address sanitizer warning in raid_status dm: Start pr_preempt from the same starting path dm: Fix PR release handling for non All Registrants dm: Start pr_reserve from the same starting path dm: Allow dm_call_pr to be used for path searches dm: return early from dm_pr_call() if DM device is suspended dm thin: fix use-after-free crash in dm_sm_register_threshold_callback dm writecache: count number of blocks discarded, not number of discard bios dm writecache: count number of blocks written, not number of write bios dm writecache: count number of blocks read, not number of read bios dm writecache: return void from functions dm kcopyd: use __GFP_HIGHMEM when allocating pages dm writecache: set a default MAX_WRITEBACK_JOBS Documentation: dm writecache: Render status list as list Documentation: dm writecache: add blank line before optional parameters dm snapshot: fix typo in snapshot_map() comment dm raid: remove redundant "the" in parse_raid_params() comment dm cache: fix typo in 2 comment blocks ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block updates from Jens Axboe: - Improve the type checking of request flags (Bart) - Ensure queue mapping for a single queues always picks the right queue (Bart) - Sanitize the io priority handling (Jan) - rq-qos race fix (Jinke) - Reserved tags handling improvements (John) - Separate memory alignment from file/disk offset aligment for O_DIRECT (Keith) - Add new ublk driver, userspace block driver using io_uring for communication with the userspace backend (Ming) - Use try_cmpxchg() to cleanup the code in various spots (Uros) - Finally remove bdevname() (Christoph) - Clean up the zoned device handling (Christoph) - Clean up independent access range support (Christoph) - Clean up and improve block sysfs handling (Christoph) - Clean up and improve teardown of block devices. This turns the usual two step process into something that is simpler to implement and handle in block drivers (Christoph) - Clean up chunk size handling (Christoph) - Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu, Ming, Sebastian, Yang, Ying) * tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits) ublk_drv: fix double shift bug ublk_drv: make sure that correct flags(features) returned to userspace ublk_drv: fix error handling of ublk_add_dev ublk_drv: fix lockdep warning block: remove __blk_get_queue block: call blk_mq_exit_queue from disk_release for never added disks blk-mq: fix error handling in __blk_mq_alloc_disk ublk: defer disk allocation ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask ublk: fold __ublk_create_dev into ublk_ctrl_add_dev ublk: cleanup ublk_ctrl_uring_cmd ublk: simplify ublk_ch_open and ublk_ch_release ublk: remove the empty open and release block device operations ublk: remove UBLK_IO_F_PREFLUSH ublk: add a MAINTAINERS entry block: don't allow the same type rq_qos add more than once mmc: fix disk/queue leak in case of adding disk failure ublk_drv: fix an IS_ERR() vs NULL check ublk: remove UBLK_IO_F_INTEGRITY ublk_drv: remove unneeded semicolon ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring zerocopy support from Jens Axboe: "This adds support for efficient support for zerocopy sends through io_uring. Both ipv4 and ipv6 is supported, as well as both TCP and UDP. The core network changes to support this is in a stable branch from Jakub that both io_uring and net-next has pulled in, and the io_uring changes are layered on top of that. All of the work has been done by Pavel" * tag 'for-5.20/io_uring-zerocopy-send-2022-07-29' of git://git.kernel.dk/linux-block: (34 commits) io_uring: notification completion optimisation io_uring: export req alloc from core io_uring/net: use unsigned for flags io_uring/net: make page accounting more consistent io_uring/net: checks errors of zc mem accounting io_uring/net: improve io_get_notif_slot types selftests/io_uring: test zerocopy send io_uring: enable managed frags with register buffers io_uring: add zc notification flush requests io_uring: rename IORING_OP_FILES_UPDATE io_uring: flush notifiers after sendzc io_uring: sendzc with fixed buffers io_uring: allow to pass addr into sendzc io_uring: account locked pages for non-fixed zc io_uring: wire send zc request type io_uring: add notification slot registration io_uring: add rsrc referencing for notifiers io_uring: complete notifiers in tw io_uring: cache struct io_notif io_uring: add zc notification infrastructure ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring buffered writes support from Jens Axboe: "This contains support for buffered writes, specifically for XFS. btrfs is in progress, will be coming in the next release. io_uring does support buffered writes on any file type, but since the buffered write path just always -EAGAIN (or -EOPNOTSUPP) any attempt to do so if IOCB_NOWAIT is set, any buffered write will effectively be handled by io-wq offload. This isn't very efficient, and we even have specific code in io-wq to serialize buffered writes to the same inode to avoid further inefficiencies with thread offload. This is particularly sad since most buffered writes don't block, they simply copy data to a page and dirty it. With this pull request, we can handle buffered writes a lot more effiently. If balance_dirty_pages() needs to block, we back off on writes as indicated. This improves buffered write support by 2-3x. Jan Kara helped with the mm bits for this, and Stefan handled the fs/iomap/xfs/io_uring parts of it" * tag 'for-5.20/io_uring-buffered-writes-2022-07-29' of git://git.kernel.dk/linux-block: mm: honor FGP_NOWAIT for page cache page allocation xfs: Add async buffered write support xfs: Specify lockmode when calling xfs_ilock_for_iomap() io_uring: Add tracepoint for short writes io_uring: fix issue with io_write() not always undoing sb_start_write() io_uring: Add support for async buffered writes fs: Add async write file modification handling. fs: Split off inode_needs_update_time and __file_update_time fs: add __remove_file_privs() with flags parameter fs: add a FMODE_BUF_WASYNC flags for f_mode iomap: Return -EAGAIN from iomap_write_iter() iomap: Add async buffered write support iomap: Add flags parameter to iomap_page_create() mm: Add balance_dirty_pages_ratelimited_flags() function mm: Move updates of dirty_exceeded into one place mm: Move starting of background writeback into the main balancing loop
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring updates from Jens Axboe: - As per (valid) complaint in the last merge window, fs/io_uring.c has grown quite large these days. io_uring isn't really tied to fs either, as it supports a wide variety of functionality outside of that. Move the code to io_uring/ and split it into files that either implement a specific request type, and split some code into helpers as well. The code is organized a lot better like this, and io_uring.c is now < 4K LOC (me). - Deprecate the epoll_ctl opcode. It'll still work, just trigger a warning once if used. If we don't get any complaints on this, and I don't expect any, then we can fully remove it in a future release (me). - Improve the cancel hash locking (Hao) - kbuf cleanups (Hao) - Efficiency improvements to the task_work handling (Dylan, Pavel) - Provided buffer improvements (Dylan) - Add support for recv/recvmsg multishot support. This is similar to the accept (or poll) support for have for multishot, where a single SQE can trigger everytime data is received. For applications that expect to do more than a few receives on an instantiated socket, this greatly improves efficiency (Dylan). - Efficiency improvements for poll handling (Pavel) - Poll cancelation improvements (Pavel) - Allow specifiying a range for direct descriptor allocations (Pavel) - Cleanup the cqe32 handling (Pavel) - Move io_uring types to greatly cleanup the tracing (Pavel) - Tons of great code cleanups and improvements (Pavel) - Add a way to do sync cancelations rather than through the sqe -> cqe interface, as that's a lot easier to use for some use cases (me). - Add support to IORING_OP_MSG_RING for sending direct descriptors to a different ring. This avoids the usually problematic SCM case, as we disallow those. (me) - Make the per-command alloc cache we use for apoll generic, place limits on it, and use it for netmsg as well (me). - Various cleanups (me, Michal, Gustavo, Uros) * tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-block: (172 commits) io_uring: ensure REQ_F_ISREG is set async offload net: fix compat pointer in get_compat_msghdr() io_uring: Don't require reinitable percpu_ref io_uring: fix types in io_recvmsg_multishot_overflow io_uring: Use atomic_long_try_cmpxchg in __io_account_mem io_uring: support multishot in recvmsg net: copy from user before calling __get_compat_msghdr net: copy from user before calling __copy_msghdr io_uring: support 0 length iov in buffer select in compat io_uring: fix multishot ending when not polled io_uring: add netmsg cache io_uring: impose max limit on apoll cache io_uring: add abstraction around apoll cache io_uring: move apoll cache to poll.c io_uring: consolidate hash_locked io-wq handling io_uring: clear REQ_F_HASH_LOCKED on hash removal io_uring: don't race double poll setting REQ_F_ASYNC_DATA io_uring: don't miss setting REQ_F_DOUBLE_POLL io_uring: disable multishot recvmsg io_uring: only trace one of complete or overflow ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull turbostat updates from Len Brown: "Only updating the turbostat tool here, no kernel changes" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: version 2022.07.28 tools/power turbostat: do not decode ACC for ICX and SPR tools/power turbostat: fix SPR PC6 limits tools/power turbostat: cleanup 'automatic_cstate_conversion_probe()' tools/power turbostat: separate SPR from ICX tools/power turbosstat: fix comment tools/power turbostat: Support RAPTORLAKE P tools/power turbostat: add support for ALDERLAKE_N tools/power turbostat: dump secondary Turbo-Ratio-Limit tools/power turbostat: simplify dump_turbo_ratio_limits() tools/power turbostat: dump CPUID.7.EDX.Hybrid tools/power turbostat: update turbostat.8 tools/power turbostat: Show uncore frequency tools/power turbostat: Fix file pointer leak tools/power turbostat: replace strncmp with single character compare tools/power turbostat: print the kernel boot commandline tools/power turbostat: Introduce support for RaptorLake
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control updates from Rafael Wysocki: "These start a rework of the handling of trip points in the thermal core, improve the cpufreq/devfreq cooling device handling, update some thermal control drivers and the tmon utility and clean up code. Specifics: - Consolidate the thermal core code by beginning to move the thermal trip structure from the thermal OF code as a generic structure to be used by the different sensors when registering a thermal zone (Daniel Lezcano). - Make per cpufreq / devfreq cooling device ops instead of using a global variable, fix comments and rework the trace information (Lukasz Luba). - Add the include/dt-bindings/thermal.h under the area covered by the thermal maintainer in the MAINTAINERS file (Lukas Bulwahn). - Improve the error output by giving the sensor identification when a thermal zone failed to initialize, the DT bindings by changing the positive logic and adding the r8a779f0 support on the rcar3 (Wolfram Sang). - Convert the QCom tsens DT binding to the dtsformat format (Krzysztof Kozlowski). - Remove the pointless get_trend() function in the QCom, Ux500 and tegra thermal drivers, along with the unused DROP_FULL and RAISE_FULL trends definitions. Simplify the code by using clamp() macros (Daniel Lezcano). - Fix ref_table memory leak at probe time on the k3_j72xx bandgap (Bryan Brattlof). - Fix array underflow in prep_lookup_table (Dan Carpenter). - Add static annotation to the k3_j72xx_bandgap_j7* data structure (Jin Xiaoyun). - Fix typos in comments detected on sun8i by Coccinelle (Julia Lawall). - Fix typos in comments on rzg2l (Biju Das). - Remove as unnecessary call to dev_err() as the error is already printed by the failing function on u8500 (Yang Li). - Register the thermal zones as hwmon sensors for the Qcom thermal sensors (Dmitry Baryshkov). - Fix 'tmon' tool compilation issue by adding phtread.h include (Markus Mayer). - Fix typo in the comments for the 'tmon' tool (Slark Xiao). - Make the thermal core use ida_alloc()/free() directly instead of ida_simple_get()/ida_simple_remove() that have been deprecated (keliu). - Drop ACPI_FADT_LOW_POWER_S0 check from the Intel PCH thermal control driver (Rafael Wysocki)" * tag 'thermal-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits) thermal/of: Initialize trip points separately thermal/of: Use thermal trips stored in the thermal zone thermal/core: Add thermal_trip in thermal_zone thermal/core: Rename 'trips' to 'num_trips' thermal/core: Move thermal_set_delay_jiffies to static thermal/core: Remove unneeded EXPORT_SYMBOLS thermal/of: Move thermal_trip structure to thermal.h thermal/of: Remove the device node pointer for thermal_trip thermal/of: Replace device node match with device node search thermal/core: Remove duplicate information when an error occurs thermal/core: Avoid calling ->get_trip_temp() unnecessarily thermal/tools/tmon: Fix typo 'the the' in comment thermal/tools/tmon: Include pthread and time headers in tmon.h thermal/ti-soc-thermal: Fix comment typo thermal/drivers/qcom/spmi-adc-tm5: Register thermal zones as hwmon sensors thermal/drivers/qcom/temp-alarm: Register thermal zones as hwmon sensors thermal/drivers/u8500: Remove unnecessary print function dev_err() thermal/drivers/rzg2l: Fix comments thermal/drivers/sun8i: Fix typo in comment thermal/drivers/k3_j72xx_bandgap: Make k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management updates from Rafael Wysocki: "These are mostly minor improvements all over including new CPU IDs for the Intel RAPL driver, an Energy Model rework to use micro-Watt as the power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq updates, documentation cleanups and a new version of the pm-graph suite of utilities. Specifics: - Make cpufreq_show_cpus() more straightforward (Viresh Kumar). - Drop unnecessary CPU hotplug locking from store() used by cpufreq sysfs attributes (Viresh Kumar). - Make the ACPI cpufreq driver support the boost control interface on Zhaoxin/Centaur processors (Tony W Wang-oc). - Print a warning message on attempts to free an active cpufreq policy which should never happen (Viresh Kumar). - Fix grammar in the Kconfig help text for the loongson2 cpufreq driver (Randy Dunlap). - Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq governor (Zhao Liu). - Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll cpuidle driver (Eiichi Tsukata). - Modify intel_idle to treat C1 and C1E as independent idle states on Sapphire Rapids (Artem Bityutskiy). - Extend support for wakeirq to callback wrappers used during system suspend and resume (Ulf Hansson). - Defer waiting for device probe before loading a hibernation image till the first actual device access to avoid possible deadlocks reported by syzbot (Tetsuo Handa). - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn Helgaas). - Add Raptor Lake-P to the list of processors supported by the Intel RAPL driver (George D Sworo). - Add Alder Lake-N and Raptor Lake-P to the list of processors for which Power Limit4 is supported in the Intel RAPL driver (Sumeet Pawnikar). - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before attempting to remove it (Hsin-Yi Wang). - Change the Energy Model code to represent power in micro-Watts and adjust its users accordingly (Lukasz Luba). - Add new devfreq driver for Mediatek CCI (Cache Coherent Interconnect) (Johnson Wang). - Convert the Samsung Exynos SoC Bus bindings to DT schema of exynos-bus.c (Krzysztof Kozlowski). - Address kernel-doc warnings by adding the description for unused function parameters in devfreq core (Mauro Carvalho Chehab). - Use NULL to pass a null pointer rather than zero according to the function propotype in imx-bus.c (Colin Ian King). - Print error message instead of error interger value in tegra30-devfreq.c (Dmitry Osipenko). - Add checks to prevent setting negative frequency QoS limits for CPUs (Shivnandan Kumar). - Update the pm-graph suite of utilities to the latest revision 5.9 including multiple improvements (Todd Brandt). - Drop pme_interrupt reference from the PCI power management documentation (Mario Limonciello)" * tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits) powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P PM: QoS: Add check to make sure CPU freq is non-negative PM: hibernate: defer device probing when resuming from hibernation intel_idle: make SPR C1 and C1E be independent cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask cpufreq: loongson2: fix Kconfig "its" grammar pm-graph v5.9 cpufreq: Warn users while freeing active policy cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1 firmware: arm_scmi: Get detailed power scale from perf Documentation: EM: Switch to micro-Watts scale PM: EM: convert power field to micro-Watts precision and align drivers PM / devfreq: tegra30: Add error message for devm_devfreq_add_device() PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero PM / devfreq: shut up kernel-doc warnings dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver dt-bindings: interconnect: Add MediaTek CCI dt-bindings PM: domains: Ensure genpd_debugfs_dir exists before remove PM: runtime: Extend support for wakeirq for force_suspend|resume ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI updates from Rafael Wysocki: "These rework the handling of ACPI device objects to use the driver core facilities for managing child ones instead of some questionable home-grown ways without the requisite locking and reference counting, clean up the EC driver, improve suspend-to-idle handling on x86, add some systems to the ACPI backlight quirk list, fix some assorted issues, clean up code and improve documentation. Specifics: - Use facilities provided by the driver core and some additional helpers to handle the children of a given ACPI device object in multiple places instead of using the children and node list heads in struct acpi_device which is error prone (Rafael Wysocki). - Fix ACPI-related device reference counting issue in the hisi_lpc bus driver (Yang Yingliang). - Drop the children and node list heads that are not needed any more from struct acpi_device (Rafael Wysocki). - Drop driver member from struct acpi_device (Uwe Kleine-König). - Drop redundant check from acpi_device_remove() (Uwe Kleine-König). - Prepare the CPPC library for handling backwards-compatible future _CPC return package formats gracefully (Rafael Wysocki). - Clean up the ACPI EC driver after previous changes in it (Hans de Goede). - Drop leftover acpi_processor_get_limit_info() declaration (Riwen Lu). - Split out thermal initialization from ACPI PSS (Riwen Lu). - Annotate more functions in the ACPI CPU idle driver to live in the cpuidle section (Guilherme G. Piccoli). - Fix _EINJ vs "special purpose" EFI memory regions (Dan Williams). - Implement a better fix to avoid spamming the console with old error logs (Tony Luck). - Fix typo in a comment in the APEI code (Xiang wangx). - Save NVS memory during transitions into S3 on Lenovo G40-45 (Manyi Li). - Add support for upcoming AMD uPEP device ID AMDI008 to the ACPI suspend-to-idle driver for x86 platforms (Shyam Sundar S K). - Clean up checks related to the ACPI_FADT_LOW_POWER_S0 platform flag in the LPIT table driver and the suspend-to-idle driver for x86 platforms (Rafael Wysocki). - Print information messages regarding declared LPS0 idle support in the platform firmware (Rafael Wysocki). - Fix missing check in register_device_clock() in the ACPI driver for Intel SoCs (huhai). - Fix ACS setup in the VIOT table parser (Eric Auger). - Skip IRQ override on AMD Zen platforms where it's harmful (Chuanhong Guo). - Use native backlight on Dell Inspiron N4010 (Hans de Goede). - Use native backlight on some TongFang devices (Werner Sembach). - Drop X86 dependency from the ACPI backlight driver Kconfig (Riwen Lu). - Shorten the quirk list in the ACPI backlight driver by identifying Clevo by board_name only (Werner Sembach). - Remove useless NULL pointer checks from 2 ACPI PCI link management functions (Andrey Strachuk). - Fix obsolete example in the ACPI EINJ documentation (Qifu Zhang). - Update links and references to _DSD-related documents (Sudeep Holla)" * tag 'acpi-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (46 commits) ACPI/PCI: Remove useless NULL pointer checks ACPI: CPPC: Do not prevent CPPC from working in the future ACPI: PM: x86: Print messages regarding LPS0 idle support ACPI: resource: skip IRQ override on AMD Zen platforms Documentation: ACPI: EINJ: Fix obsolete example ACPI: video: Use native backlight on Dell Inspiron N4010 ACPI: PM: s2idle: Use LPS0 idle if ACPI_FADT_LOW_POWER_S0 is unset Revert "ACPI / PM: LPIT: Register sysfs attributes based on FADT" ACPI: video: Shortening quirk list by identifying Clevo by board_name only ACPI: video: Force backlight native for some TongFang devices ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008 ACPI: VIOT: Fix ACS setup ACPI: bus: Drop unused list heads from struct acpi_device hisi_lpc: Use acpi_dev_for_each_child() bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe() ACPI: bus: Drop driver member of struct acpi_device ACPI: bus: Drop redundant check in acpi_device_remove() ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP ACPI: LPSS: Fix missing check in register_device_clock() ACPI: APEI: Better fix to avoid spamming the console with old error logs ... -
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon updates from Guenter Roeck: - Substantial rewrite of lm90 driver to support several additional chips and improve support for existing chips. - Add support of ROG ZENITH II EXTREME, Maximus XI Hero, and Strix Z690-a D4 to asus-ec-sensors driver - Add support of F71858AD to f71882fg driver - Add support of Aquacomputer Quadro to aquacomputer_d5next driver - Improved assembler code and add support for Dell G5 5590 as well as XPS 13 7390 in dell-smm driver - Add support for ASUS TUF GAMING B550-PLUS WIFI II to nct775 driver - Add support for IEEE 754 half precision to PMBus core. Also support for Analog Devices LT7182S, improve regulator support, and report various MFR register values in debugfs. - Various other minor improvements and fixes * tag 'hwmon-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (85 commits) hwmon: (aquacomputer_d5next) Add support for Aquacomputer Quadro fan controller hwmon: (dell-smm) Improve documentation hwmon: (nct6775) add ASUS TUF GAMING B550-PLUS WIFI II hwmon: (occ) Replace open-coded variant of %*phN specifier hwmon: (sht15) Fix wrong assumptions in device remove callback hwmon: (aquacomputer_d5next) Add support for reading the +12V voltage sensor on D5 Next hwmon: (tps23861) fix byte order in current and voltage registers hwmon: (aspeed-pwm-tacho) increase fan tach period (again) hwmon: (aquacomputer_d5next) Add D5 Next fan control support hwmon: (mcp3021) improve driver support for newer hwmon interface hwmon: (asus-ec-sensors) add definitions for ROG ZENITH II EXTREME hwmon: (aquacomputer_d5next) Move device-specific data into struct aqc_data hwmon: (asus-ec-sensors) add missing sensors for X570-I GAMING hwmon: (drivetemp) Add module alias hwmon: (asus_wmi_sensors) Save a few bytes of memory hwmon: (lm90) Use worker for alarm notifications hwmon: (asus-ec-sensors) add support for Maximus XI Hero hwmon: (dell-smm) Improve assembly code hwmon: (pmbus/ltc2978) Set voltage resolution hwmon: (pmbus) Add list_voltage to pmbus ops ...
-
Linus Torvalds authored
Merge tag 'pwm/for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "After v5.19 had all drivers converted to the new atomic API and nobody has reported any breakage, this set of changes starts by dropping the legacy support. Some existing drivers get improvements and broader chip support and a new driver is added that emulates a PWM controller using a clock output. Other than that there's the usual bits of cleanups and minor fixes" * tag 'pwm/for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (21 commits) pwm: lpc18xx: Fix period handling pwm: lpc18xx: Convert to use dev_err_probe() pwm: twl-led: Document some limitations and link to the reference manual MAINTAINERS: Remove myself as PWM maintainer MAINTAINERS: Add include/dt-bindings/pwm to PWM SUBSYSTEM dt-bindings: pwm: mediatek: Add compatible string for MT8195 pwm: Add clock based PWM output driver dt-bindings: pwm: Document clk based PWM controller pwm: sifive: Shut down hardware only after pwmchip_remove() completed pwm: sifive: Ensure the clk is enabled exactly once per running PWM pwm: sifive: Simplify clk handling pwm: sifive: Enable clk only after period check in .apply() pwm: sifive: Reduce time the controller lock is held pwm: sifive: Fold pwm_sifive_enable() into its only caller pwm: sifive: Simplify offset calculation for PWMCMP registers pwm: mediatek: Add MT8365 support dt-bindings: pwm: Add MT8365 SoC binding pwm: Drop unused forward declaration from pwm.h pwm: Reorder header file to get rid of struct pwm_capture forward declaration pwm: atmel-tcb: Fix typo in comment ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi updates from Mark Brown: "The big update this time around is some excellent work from David Jander who went through the fast path and really eliminated overheads, meaning that we are seeing a huge reduction in the time spent between transfers for single threaded clients. Benchmarking has been coming out at about a halving of overhead which is clearly visible in system level usage that stresses SPI like some CAN and IIO applications, especially with small transfers. Thanks to David for taking the time to drill down into this and push the work upstream. Otherwise there's been a bunch of new device support and the usual updates. - Optimisation of the fast path, particularly around the number and types of locking operations, from David Jander. - Support for Arbel NPCM845, HP GXP, Intel Meteor Lake and Thunder Bay, MediaTek MT8188 and MT8365, Microchip FPGAs, nVidia Tegra 241 and Samsung Exynos Auto v9 and 4210" * tag 'spi-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (97 commits) MAINTAINERS: add spi support to GXP spi: dt-bindings: add documentation for hpe,gxp-spifi spi: spi-gxp: Add support for HPE GXP SoCs spi: a3700: support BE for AC5 SPI driver spi/panel: dt-bindings: drop CPHA and CPOL from common properties spi: bcm2835: enable shared interrupt support spi: dt-bindings: spi-controller: correct example indentation spi: dt-bindings: qcom,spi-geni-qcom: allow three interconnects spi: npcm-fiu: Add NPCM8XX support dt-binding: spi: Add npcm845 compatible to npcm-fiu document spi: npcm-fiu: Modify direct read dummy configuration spi: atmel: remove #ifdef CONFIG_{PM, SLEEP} spi: dt-bindings: Add compatible for MediaTek MT8188 spi: dt-bindings: mediatek,spi-mtk-nor: Update bindings for nor flash spi: dt-bindings: atmel,at91rm9200-spi: convert to json-schema spi: tegra20-slink: fix UAF in tegra_slink_remove() spi: Fix simplification of devm_spi_register_controller spi: microchip-core: switch to use dev_err_probe() spi: microchip-core: switch to use devm_spi_alloc_master() spi: microchip-core: fix UAF in mchp_corespi_remove() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator updates from Mark Brown: "This has been a fairly quiet release for the regulator API, a few new drivers and a small API update: - Support for specifying an initial load as part of requesting regulators through the bulk API - Support for Maxim MAX597x, Qualcomm PM8074, PM8909 and Realtek RT5120 devices" * tag 'regulator-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (35 commits) regulator: core: Allow drivers to define their init data as const regulator: core: Allow specifying an initial load w/ the bulk API regulator: mt6380: Fix unused array warning regulator: Add missing type for 'regulator-microvolt-offset' regulator: core: Fix off-on-delay-us for always-on/boot-on regulators regulator: of: Fix refcount leak bug in of_get_regulation_constraints() regulator: pwm: Update Lee Jones' email address regulator: max597x: Don't return uninitialized variable in .probe regulator: qcom,spmi-regulator: add PMP8074 PMIC regulator: qcom,spmi-regulator: Convert to dtschema regulator: qcom_spmi: add support for PMP8074 regulators regulator: qcom_spmi: add support for HT_P600 regulator: qcom_spmi: add support for HT_P150 regulator: max597x: Remove unused including <linux/version.h> regulator: Fix MFD_MAX597X dependency regulator: Fix parameter declaration and spelling mistake. regulator: max597x: Add support for max597x regulator regulator: scmi: Add missing of_node_get() regulator: qcom_smd: Add PM8909 RPM regulators regulator: dt-bindings: qcom,smd-rpm: Add PM8909 ... -
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap updates from Mark Brown: "The big thing this release is a big cleanup of the interrupt code from Aidan MacDonald, plus a few new API updates: - Rework of the interrupt code, making it much simpler and easier to extend - Support for device specific update bits operations with devices that otherwise use bitstream interfaces - Support for bit operations on fields as well as whole registers" * tag 'regmap-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: permit to set reg_update_bits with bulk implementation regmap: add WARN_ONCE when invalid mask is provided to regmap_field_init() regmap-irq: Fix bug in regmap_irq_get_irq_reg_linear() regmap: cache: Add extra parameter check in regcache_init regmap-irq: Deprecate the not_fixed_stride flag regmap-irq: Add get_irq_reg() callback regmap-irq: Fix inverted handling of unmask registers regmap-irq: Deprecate type registers and virtual registers regmap-irq: Introduce config registers for irq types regmap-irq: Refactor checks for status bulk read support regmap-irq: Remove mask_writeonly and regmap_irq_update_bits() regmap-irq: Remove inappropriate uses of regmap_irq_update_bits() regmap-irq: Remove an unnecessary restriction on type_in_mask regmap-irq: Cleanup sizeof(...) use in memory allocation regmap-irq: Remove unused type_reg_stride field regmap-irq: Convert bool bitfields to unsigned int regmap: Don't warn about cache only mode for devices with no cache regmap: provide regmap_field helpers for simple bit operations regmap: cache: Fix syntax errors in comments -
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM boardfile deprecation from Arnd Bergmann: "Over the past ten years, new machine support was based on device tree, and an initial set of about 400 boards using ATAGS with boardfile for booting were grandfathered in, with about half of them either removed or converted to DT over time. Based on the recent mailing list discussion I started, I have now turned the findings into a set of patches that marks most board files as 'depends on UNUSED_BOARD_FILES', leaving only 38 of the 196 boards. For the boards that are marked as unused, there are two final chances for potential users: The removal is scheduled to take place after the longterm stable kernel at the end of 2022, so users can stay on that version for another few years, and if anyone still has one of these machines and is planning to keep updating kernels beyond that version, they can speak up now to have their boards taken off the list again. Waiting for the LTS release also makes sure that there will be at least one longterm kernel that contains the recent multiplatform conversion along while still supporting all legacy boards. The short summary of the current status is: - The s3c24xx, cns3xxx, iop32x and mv78xx0 platforms have no known users and will be removed entirely. - The mmp and davinci platforms have DT support for the important machines and will become DT-only after this. - s3c64xx, dove, orion5x, and pxa keep some board files to allow those to be migrated over to DT more easily, but most board files are getting removed now. DT support on these platforms is partially working but requires changes to additional drivers for the other boards. - omap1, ep93xx, sa1100, footbridge and rpc have no DT support at the moment but have some boards with known users. Removing the board files that nobody uses should make it easier to try a DT conversion if anyone cares. There is no explicit timeline what happens with the boards that remain after this removal, but I expect to revisit this in the future, and with most boards gone, there will be a good time to do a treewide review of platform drivers that never gained DT support and have no remaining in-tree board files" Link: https://lore.kernel.org/linux-arm-kernel/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/ * tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: cns3xxx: add CONFIG_UNUSED_BOARD_FILES dependency ARM: iop32x: mark as unused ARM: s3c: mark most board files as unused ARM: omap1: add Kconfig dependencies for unused boards ARM: sa1100: mark most boards as unused ARM: footbridge: mark cats board for removal ARM: mmp: mark all board files for removal ARM: ep93xx: mark most board files as unused ARM: davinci: mark all ATAGS board files as unused ARM: orion: add ATAGS dependencies ARM: pxa: add Kconfig dependencies for ATAGS based boards ARM: add CONFIG_UNUSED_BOARD_FILES ARM: add ATAGS dependencies to non-DT platforms -
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM new SoC support from Arnd Bergmann: "This adds initial support for two SoC families that have been under review for a while. In both cases, the origonal idea was to have a minimally functional version, but we ended up leaving out the clk drivers that are still under review and will be merged through the corresponding subsystem tree. The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and based on the 32-bit NPCM7xx family but is now getting added to arch/arm64 as well. Sunplus SP7021, also known as Plus1, is a general-purpose System-in-Package design based on the 32-bit Cortex-A7 SoC on the main chip, plus an I/O chip and memory in the same" * tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE arm64: defconfig: Add Nuvoton NPCM family support arm64: dts: nuvoton: Add initial NPCM845 EVB device tree arm64: dts: nuvoton: Add initial NPCM8XX device tree arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string dt-bindings: arm: npcm: Add maintainer reset: npcm: Add NPCM8XX support dt-bindings: reset: npcm: Add support for NPCM8XX reset: npcm: using syscon instead of device data ARM: dts: nuvoton: add reset syscon property dt-bindings: reset: npcm: add GCR syscon property dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock dt-bindings: watchdog: npcm: Add npcm845 compatible string dt-bindings: timer: npcm: Add npcm845 compatible string ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig ARM: sunplus: Add initial support for Sunplus SP7021 SoC irqchip: Add Sunplus SP7021 interrupt controller driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC defconfig updates from Arnd Bergmann: "This branch includes the usual updates to defconfig files, enabling additional driver support for the supported platforms. There is also a global refresh for all of them that reorders the lines according to the 'savedefconfig' output, but without removing lines that are no longer part of the refresh. I went through the most common removed lines to also address them while making sure to catch renamed options and add them back under the new name. The boardfile deprecation branch is based on top of this to avoid conflicts against removing the unused boardfile configs from the generic defconfig files" * tag 'arm-defconfig-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) arm64: defconfig: Sync some configs with savedefconfig arm64: refresh defconfig file ARM: defconfig: kill remnants of CONFIG_LEDS ARM: defconfig: remove broken CONFIG_THUMB disables ARM: defconfig: address renamed CONFIG_DEBUG_INFO=y ARM: defconfig: remove stale CONFIG_ZBOOT_ROM entries ARM: defconfig: remove irda remnants ARM: refresh defconfig files arm64: defconfig: Demote Qualcomm USB PHYs to modules arm64: defconfig: Enable Qualcomm SC8280XP providers ARM: multi_v7_defconfig: Update configs for BCM63138 arm64: defconfig: enable Qualcomm Bandwidth Monitor arm64: defconfig: Enable Allwinner built in CODECs arm64: defconfig: Enable qcom interconnect drivers arm64: defconfig: Enable qcom ss & hs usb phy arm64: defconfig: enable Qualcomm LPG leds driver arm64: defconfig: Enable gpio-fan support arm64: defconfig: Enable DRM_V3D ARM: configs: Enable DRM_V3D arm64: defconfig: Enable R8A779G0 SoC ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM DT updates from Arnd Bergmann: "As usual, the bulk of the changes for the SoC tree are devicetree file updates, and most of these changes are for 64-bit embedded machines. As before, there are a ton of style cleanups, and additional hardware support for existing machines. Looking only at the new SoC, the notable additions are: - A whole family of Broadcom broadband SoCs, both 32-bit and 64-bit: BCM63178, BCM63158, BCM4912, BCM6858, BCM6878, BCM6846, BCM63146, BCM6856, BCM6855, BCM6756, BCM63148, and BCM6813. Each SoC comes with a corresponding reference board. - The new NXP i.MX93 SoC, the follow-up to the popular i.MX6 and i.MX8 embedded SoCs, now using Cortex-A55 cores and the Ethos-U65 NPU. - Qualcomm Snapdragon 8cx Gen3 (SC8280XP), the current high end of Arm based Laptop SoCs, and its automotive cousin, the SA8540P. The SC8280XP is used in the Lenovo Thinkpad X13s laptop that also gets added here in addition to the reference boards. - Allwinner H616, a newer version of the H6 SoC, targeted at Set-top-box applications. It comes with dts files for the Orange Pi zero2 single-board computer and the X96 Mate set-top-box - Marvell Prestera 98DX2530 (AlleyCat5), a network switch chip in the Armada SoC family based on the Cortex-A55 core. New machines based on previously supported SoCs include: - Several new machines on NXP i.MX platforms: multiple Toradex Colibri boards using the "Iris" and "Ixora" carriers, DH electronics i.MX8M Plus DHCOM and PDK2, TQ-Systems TQMa8MPQL, and phytech phyBOARD-Polis-i.MX8MM. - Google Chameleon v3 FPGA board based on Intel Arria10 and Stratix 10 Software Virtual platform, both in the SoCFPGA platform. - Two new wireless devices based on Broadcom SoCs: The Asus GT-AX6000 Router and the Cisco Meraki MR26 access point - Improved Chromebook support for both the Mediatek and Qualcomm SoC families brought added machines: Acer Chromebook 514 (MT8192), Acer Chromebook Spin 513 (MT8195) and a couple of SC7180 based machines including the Lenovo IdeaPad Chromebook Duet 3. - Xiaomi Mi Mix2s, LG G7 and LG V35 are mobile phones based on Qualcomm SDM845, while Mi 5s Plus is based on MSM8996. - Finally, there are a few development board on other chips: PCB8309 (Microchip lan966x), Radxa Rock Pi S (Rockchips RK3308) DH DRC Compact (ST STM32MP1) and Inforce IFC6560 (Qualcomm SDM660)" * tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (829 commits) dt-bindings: soc: bcm: use absolute path to other schema dt-bindings: soc: bcm: drop quotes when not needed dt-bindings: soc: microchip: use absolute path to other schema dt-bindings: soc: microchip: drop quotes when not needed ARM: dts: lan966x: keep lan966 entries alphabetically sorted ARM: dts: lan966x: add support for pcb8309 dt-bindings: arm: at91: add lan966 pcb8309 board ARM: dts: lan966x: Enable network driver on pcb8291 ARM: dts: lan966x: Disable can0 on pcb8291 ARM: dts: lan966x: Add gpio-restart dt-bindings: arm: aspeed: add Aspeed Evaluation boards arm64: dts: qcom: Add support for Xiaomi Mi Mix2s dt-bindings: arm: qcom: Add Xiaomi Mi Mix2s bindings dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices dt-bindings: arm: qcom: add missing SM6350 board compatibles dt-bindings: arm: qcom: add missing SM6125 board compatibles dt-bindings: arm: qcom: add missing SDM845 board compatibles dt-bindings: arm: qcom: add missing SDM636 board compatibles dt-bindings: arm: qcom: add missing SDM630 board compatibles dt-bindings: arm: qcom: add missing QCS404 board compatibles ...
-
