- 20 Mar, 2024 40 commits
-
-
Muhammad Ahmed authored
[WHY] Blackscreen hang @ PC EF000025 when trying to wake up from S0i3. DCN gets powered off due to dc_power_down_on_boot() being called after timeout. [HOW] Setting the power_down_on_boot function pointer to null since we don't expect the function to be called for APU. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Aric Cyr authored
- Support long vblank feature - Add monitor patch for specific eDP - Init DPPCLK from SMU on dcn32 - Update odm when ODM combine is changed on an otg master pipe with no plane - Fix idle check for shared firmware state - Add guards for idle on reg read/write - Guard cursor idle reallow by DC debug option - Add debug counters to IPS exit prints - Add left edge pixel for YCbCr422/420 + ODM pipe split - Amend coasting vtotal for replay low hz - Refactor DPP into a component directory - Set the power_down_on_boot function pointer to null - Implement update_planes_and_stream_v3 sequence - Lock all enabled otg pipes even with no planes - Implement wait_for_odm_update_pending_complete - Add a dc_state NULL check in dc_state_release - Backup and restore only on full updates - Update DMUB flags and definitions - Return the correct HDCP error code - Add comments to v_total calculation and drop legacy TODO Acked-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
-
Alvin Lee authored
[WHY & HOW] Since the backup and restore for plane and stream states has a significant amount of data to copy, we will change the backup and restore sequence to only take place during full updates. We will also move the scratch memory to struct dc instead of dc_state to avoid needing to allocate large amounts of memory every time we create a new DC state. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Acked-by:
Alvin Lee <alvin.lee2@amd.com> Tested-by:
-
Wenjing Liu authored
[WHY & HOW] Update planes and stream version 3 separates FULL and FAST updates to their own sequences. It aims to clean up frequent checks for update type resulting unnecessary branching in logic flow. It also adds a new commit minimal transition sequence, which detects the need for minimal transition based on the actual comparison of current and new states instead of "predicting" it based on per feature software policy, i.e. could_mpcc_tree_change_for_active_pipes. The new commit minimal transition sequence is made universal to any power saving features that would use extra free pipes such as Dynamic ODM/MPC Combine, MPO or SubVp. Therefore there is no longer a need to specially handle compatibility problems with transitions among those features as they are now transparent to the new sequence. Reviewed-by:
-
Victor Skvortsov authored
Host will initiate an FLR in SDMA poison consumption scenario. Guest should wait for FLR message to re-init data exchange. Signed-off-by:
Victor Skvortsov <victor.skvortsov@amd.com> Reviewed-by:
Zhigang Luo <zhigang.luo@amd.com> Signed-off-by:
-
Lijo Lazar authored
Check if the device is present in the bus before trying to recover. It could be that device itself is lost from the bus in some hang situations. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Asad Kamal <asad.kamal@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
[WHY & HOW] This commit just adds some simple comments to help understand the calculation of V total duration for Freesync. Also, remove a legacy TODO comment from link service type. Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by:
-
Anthony Koo authored
[WHAT] - Update replay residency tracing design to support more types including tracking PHY and ALPM residency types - Add commands for Replay frame update count profiling - Enhance HWFQ with additional flags to allow for more optimized IPS low power state residencies - Add new flag to indicate if a new frame update needed for ABM to ramp up into steady state Acked-by:
Anthony Koo <anthony.koo@amd.com> Tested-by:
-
Xiaojian Du authored
This will add the sensor value of VCN activity for some ASICs. Signed-off-by:
Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by:
-
Revalla Hari Krishna authored
[WHY & HOW] Move all dpp files to a new dpp directory. Reviewed-by:
Martin Leung <martin.leung@amd.com> Acked-by:
Revalla Hari Krishna <harikrishna.revalla@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[WHY] To have a log of the entry/exit counters in case the system hangs to measure stability. [HOW] Read them from firmware state and pass them to the prints. Reviewed-by:
Duncan Ma <duncan.ma@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[WHY] To control whether idle optimizations reallowed after the first cursor update. [HOW] Add checks to the conditions. Reviewed-by:
-
Nicholas Kazlauskas authored
[WHY] If DCN is in idle then we should not be accessing DCN registers or it can lead to hangs. [HOW] Log the error and return 0 or drop the write if it's in idle. This is skipped in the exit sequence itself since the boolean flips before it starts. It also does not cover accesses from external clients outside of DM/DC like firmware or the kernel mode driver. Reviewed-by:
-
Shashank Sharma authored
This patch removes an unused input variable in the MES doorbell function. Cc: Christian König <Christian.Koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Christian König <Christian.Koenig@amd.com> Signed-off-by:
Shashank Sharma <shashank.sharma@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Fixes index out of bounds issue in the color transformation function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, an error message is logged and the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max Fixes: b6295960 ("drm/amd/display: Build unity lut for shaper") Cc: Vitaly Prosyak <vitaly.prosyak@amd.com> Cc: Charlene Liu <Charlene.Liu@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
-
Robin Chen authored
[WHY] We want to support low hz case, but the original vtotal/vtotal_min/vtotal_max can't support more than 0x7FFF. [HOW] We use the 2 HW reg to contorl long vblank case. 1. OTG_V_COUNT_STOP_CONTROL -> vcount_stop 2. OTG_V_COUNT_STOP_CONTROL2 -> vcount_stop_timer vcount_stop define from which line we stop using vcount and start using vcount2. vcount_stop_timer define how long we use vcount2. Ex: Vtotal = 7 OTG_V_COUNT_STOP_CONTROL = 4 OTG_V_COUNT_STOP_CONTROL2 = 5 time : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 vcount : 0, 1, 2, 3, - - - - - 4, 5, 6 vcount2 : 0, 1, 2, 3, 4, Reviewed-by:
Jun Lei <jun.lei@amd.com> Acked-by:
ChunTao Tso <chuntao.tso@amd.com> Signed-off-by: Robin Chen<robin.chen@amd.com> Tested-by:
-
Aric Cyr authored
- Change default size for dummy plane in DML2 - Enable DML2 debug flags - Add some forward declarations - Add DML2 folder to include path - Set DCN351 BB and IP the same as DCN35 - Override min required DCFCLK in dml1_validate - Fix function banner for amdgpu_dm_psr_disable_all() - Allow dirty rects to be sent to dmub when abm is active - Add debug key to allow disabling dtbclk - Add debug prints for IPS testing - Exit idle optimizations before HDCP execution - Add entry and exit counters Acked-by:
-
Anthony Koo authored
[WHY & HOW] Add new counters in the shared IPS firmware state. Acked-by:
-
Nicholas Kazlauskas authored
[WHY] To log commit states and when we transition in/out of allow and idle states and the caller. [HOW] Add a new logging helper and wrap idle optimization calls to receive the caller. Reviewed-by:
-
Muhammad Ahmed authored
[HOW] Add debug key to allow disabling dtbclk Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Acked-by:
-
Tao Zhou authored
Let kfd interrupt handler process it. v2: return 0 instead of 1 for fed error. drop the usage of strcmp in interrupt handler. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Tao Zhou authored
Replace it with related interface in gfxhub functions. v2: replace node id with xcc id. get node id for query_utcl2_poison_status Signed-off-by: -
Sunil Khatri authored
Add relevant ringbuffer information such as rptr, wptr,rb mask, ring name, ring size and also the rings content for each ring on a gpu reset. Signed-off-by:
Sunil Khatri <sunil.khatri@amd.com> Reviewed-by:
-
Roman Li authored
[WHY] Incorrect function name in function banner. [HOW] Correct name and brief description. Reviewed-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by:
Roman Li <roman.li@amd.com> Tested-by:
-
Sunil Khatri authored
Add page fault information to the devcoredump. Output of devcoredump: **** AMDGPU Device Coredump **** version: 1 kernel: 6.7.0-amd-staging-drm-next module: amdgpu time: 29.725011811 process_name: soft_recovery_p PID: 1720 Ring timed out details IP Type: 0 Ring Name: gfx_0.0.0 [gfxhub] Page fault observed Faulty page starting at address: 0x0000000000000000 Protection fault status register: 0x301031 VRAM is lost due to GPU reset! Signed-off-by:
-
Tao Zhou authored
Implement it for gfxhub 1.0 and 1.2. v2: input logical xcc id for poison query interface. Signed-off-by:
-
Tao Zhou authored
Add UCE and FED bit definitions. Signed-off-by:
-
Aurabindo Pillai authored
Add DML2 compilation rule in the Makefile. Reviewed-by:
Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by:
-
Sunil Khatri authored
Currently page fault information is stored per vm and which could be freed or stale during reset. Add it pagefault information in the vm_manager which is a global space for vm's and remains valid across. Signed-off-by:
-
Aurabindo Pillai authored
[WHAT] Add DML2 pipe and config struct forward declaration as a preparation for DML2. Reviewed-by:
-
Gabe Teeger authored
This reverts commit e2fdd5c5 ("drm/amd/display: Add left edge pixel for YCbCr422/420 + ODM pipe split") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
George Shen <george.shen@amd.com> Reviewed-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
Gabe Teeger <gabe.teeger@amd.com> Tested-by:
-
George Shen authored
[WHY] Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM pipesplit is used, pixels on the left edge of ODM slices need one extra pixel from the right edge of the previous slice to calculate the correct chroma value. Without this change, the chroma value is slightly different than expected. This is usually imperceptible visually, but it impacts test pattern CRCs for compliance test automation. [HOW] Update logic to use the register for adding extra left edge pixel for YCbCr422/420 ODM cases. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
-
Martin Leung authored
why and how: causes black screen on PNP on DCN 3.5 This reverts commit f30a3bea ("drm/amd/display: Exit idle optimizations before HDCP execution") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[WHY] PSP can access DCN registers during command submission and we need to ensure that DCN is not in PG before doing so. [HOW] Add a callback to DM to lock and notify DC for idle optimization exit. It can't be DC directly because of a potential race condition with the link protection thread and the rest of DM operation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
-
Ma Jun authored
OD is not supported on Arcturus, so the OD table should not be used. Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Acked-by:
-
Le Ma authored
To fix the entity rq NULL issue. This setting has been moved to upper level. Fixes: b7043800 ("drm/amdgpu: move buffer funcs setting up a level") Signed-off-by:
Le Ma <le.ma@amd.com> Reviewed-by:
-
Leo Ma authored
[Why] When mode switching is triggered there is momentary noise visible on some HDMI TV or displays. [How] Wait for 2 frames to make sure we have enough time to send out AV mute and sink receives a full frame. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Leo Ma <hanghong.ma@amd.com> Tested-by:
-
Wenjing Liu authored
This reverts commit 340383c7 ("drm/amd/display: Remove pixle rate limit for subvp") [why] The original commit causes a regression when subvp is applied on ODM required 8k60hz timing. The display shows black screen on boot. The issue can be recovered with hotplug. It also causes MPO to fail. We will temprarily revert this commit and investigate the root cause further. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Lang Yu authored
Ready now. Remove this workaround. This reverts commit d40f6213. Signed-off-by:
Lang Yu <Lang.Yu@amd.com> Tested-by:
Alan Liu <haoping.liu@amd.com> Acked-by:
-
Ma Jun authored
This patch causes the following iounmap erorr and calltrace iounmap: bad address 00000000d0b3631f The original patch was unjustified because amdgpu_device_fini_sw() will always cleanup the rmmio mapping. This reverts commit eb4f1398. Signed-off-by:
-
