Skip to content

L
linux
Switch branch/tag
  1. 03 Feb, 2021 1 commit
  3. 02 Feb, 2021 2 commits
  5. 30 Jan, 2021 1 commit
  7. 28 Jan, 2021 4 commits
  9. 27 Jan, 2021 1 commit
  11. 26 Jan, 2021 5 commits
  13. 25 Jan, 2021 2 commits
  15. 22 Jan, 2021 6 commits
  17. 21 Jan, 2021 1 commit
    • Rouven Czerwinski's avatar
      tee: optee: replace might_sleep with cond_resched · dcb3b06d
      Rouven Czerwinski authored 
      might_sleep() is a debugging aid and triggers rescheduling only for
certain kernel configurations. Replace with an explicit check and
reschedule to work for all kernel configurations. Fixes the following
trace:

  [  572.945146] rcu: INFO: rcu_sched self-detected stall on CPU
  [  572.949275] rcu:     0-....: (2099 ticks this GP) idle=572/1/0x40000002 softirq=7412/7412 fqs=974
  [  572.957964]  (t=2100 jiffies g=10393 q=21)
  [  572.962054] NMI backtrace for cpu 0
  [  572.965540] CPU: 0 PID: 165 Comm: xtest Not tainted 5.8.7 #1
  [  572.971188] Hardware name: STM32 (Device Tree Support)
  [  572.976354] [<c011163c>] (unwind_backtrace) from [<c010b7f8>] (show_stack+0x10/0x14)
  [  572.984080] [<c010b7f8>] (show_stack) from [<c0511e4c>] (dump_stack+0xc4/0xd8)
  [  572.991300] [<c0511e4c>] (dump_stack) from [<c0519abc>] (nmi_cpu_backtrace+0x90/0xc4)
  [  572.999130] [<c0519abc>] (nmi_cpu_backtrace) from [<c0519bdc>] (nmi_trigger_cpumask_backtrace+0xec/0x130)
  [  573.008706] [<c0519bdc>] (nmi_trigger_cpumask_backtrace) from [<c01a5184>] (rcu_dump_cpu_stacks+0xe8/0x110)
  [  573.018453] [<c01a5184>] (rcu_dump_cpu_stacks) from [<c01a4234>] (rcu_sched_clock_irq+0x7fc/0xa88)
  [  573.027416] [<c01a4234>] (rcu_sched_clock_irq) from [<c01acdd0>] (update_process_times+0x30/0x8c)
  [  573.036291] [<c01acdd0>] (update_process_times) from [<c01bfb90>] (tick_sched_timer+0x4c/0xa8)
  [  573.044905] [<c01bfb90>] (tick_sched_timer) from [<c01adcc8>] (__hrtimer_run_queues+0x174/0x358)
  [  573.053696] [<c01adcc8>] (__hrtimer_run_queues) from [<c01aea2c>] (hrtimer_interrupt+0x118/0x2bc)
  [  573.062573] [<c01aea2c>] (hrtimer_interrupt) from [<c09ad664>] (arch_timer_handler_virt+0x28/0x30)
  [  573.071536] [<c09ad664>] (arch_timer_handler_virt) from [<c0190f50>] (handle_percpu_devid_irq+0x8c/0x240)
  [  573.081109] [<c0190f50>] (handle_percpu_devid_irq) from [<c018ab8c>] (generic_handle_irq+0x34/0x44)
  [  573.090156] [<c018ab8c>] (generic_handle_irq) from [<c018b194>] (__handle_domain_irq+0x5c/0xb0)
  [  573.098857] [<c018b194>] (__handle_domain_irq) from [<c052ac50>] (gic_handle_irq+0x4c/0x90)
  [  573.107209] [<c052ac50>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x90)
  [  573.114682] Exception stack(0xd90dfcf8 to 0xd90dfd40)
  [  573.119732] fce0:                                                       ffff0004 00000000
  [  573.127917] fd00: 00000000 00000000 00000000 00000000 00000000 00000000 d93493cc ffff0000
  [  573.136098] fd20: d2bc39c0 be926998 d90dfd58 d90dfd48 c09f3384 c01151f0 400d0013 ffffffff
  [  573.144281] [<c0100b0c>] (__irq_svc) from [<c01151f0>] (__arm_smccc_smc+0x10/0x20)
  [  573.151854] [<c01151f0>] (__arm_smccc_smc) from [<c09f3384>] (optee_smccc_smc+0x3c/0x44)
  [  573.159948] [<c09f3384>] (optee_smccc_smc) from [<c09f4170>] (optee_do_call_with_arg+0xb8/0x154)
  [  573.168735] [<c09f4170>] (optee_do_call_with_arg) from [<c09f4638>] (optee_invoke_func+0x110/0x190)
  [  573.177786] [<c09f4638>] (optee_invoke_func) from [<c09f1ebc>] (tee_ioctl+0x10b8/0x11c0)
  [  573.185879] [<c09f1ebc>] (tee_ioctl) from [<c029f62c>] (ksys_ioctl+0xe0/0xa4c)
  [  573.193101] [<c029f62c>] (ksys_ioctl) from [<c0100060>] (ret_fast_syscall+0x0/0x54)
  [  573.200750] Exception stack(0xd90dffa8 to 0xd90dfff0)
  [  573.205803] ffa0:                   be926bf4 be926a78 00000003 8010a403 be926908 004e3cf8
  [  573.213987] ffc0: be926bf4 be926a78 00000000 00000036 be926908 be926918 be9269b0 bffdf0f8
  [  573.222162] ffe0: b6d76fb0 be9268fc b6d66621 b6c7e0d8

seen on STM32 DK2 with CONFIG_PREEMPT_NONE.

Fixes: 9f02b8f6 ("tee: optee: add might_sleep for RPC requests")
Signed-off-by: default avatarRouven Czerwinski <r.czerwinski@pengutronix.de>
Tested-by: default avatarSumit Garg <sumit.garg@linaro.org>
[jw: added fixes tag + small adjustments in the code]
Signed-off-by: default avatarJens Wiklander <jens.wiklander@linaro.org>
      dcb3b06d
  19. 18 Jan, 2021 6 commits
  21. 15 Jan, 2021 8 commits
  23. 14 Jan, 2021 3 commits
    • Marek Vasut's avatar
      ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02 · 83d41122
      Marek Vasut authored 
      The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0.
Since GPIO_ACTIVE_HIGH is defined as 0, this change only increases the
correctness of the DT.

Fixes: fde180f0 ("ARM: dts: stm32: Add DHSOM based DRC02 board")
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@foss.st.com>
      83d41122
    • Marek Vasut's avatar
      ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX · 10793e55
      Marek Vasut authored 
      The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0.
Due to a change in gpiolib-of.c, setting flags to GPIO_ACTIVE_LOW and
using output-low DT property leads to the GPIO being set high instead.

Fixes: ac68793f ("ARM: dts: stm32: Add DHCOM based PicoITX board")
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@foss.st.com>
      10793e55
    • Marek Vasut's avatar
      ARM: dts: stm32: Fix GPIO hog names on DHCOM · bcbacfb8
      Marek Vasut authored 
      The GPIO hog node name should match regex '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$',
make it so and fix the following two make dtbs_check warnings:

arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dt.yaml: hog-usb-port-power: $nodename:0: 'hog-usb-port-power' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dt.yaml: hog-usb-hub: $nodename:0: 'hog-usb-hub' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'

Fixes: ac68793f ("ARM: dts: stm32: Add DHCOM based PicoITX board")
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@foss.st.com>
      bcbacfb8
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7