- 24 Sep, 2022 40 commits
-
-
Paul Kocialkowski authored
Introduce some helpers for buffer and general video configuration. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Paul Kocialkowski authored
In order to keep the power use count fields balanced when link changes happen between v4l2_pipeline_pm_get/set calls (in open/close), the link_notify media operation callback needs to be registered. Signed-off-by:
-
Paul Kocialkowski authored
The driver does not expose controls directly and thus does not need a controls handler for its own use. Controls attached to subdevs used to be exposed that way, however this can easily lead to issue when multiple subdevs attached to the same v4l2 device expose the same controls. Subdev controls should be set through each individual subdev node instead. Signed-off-by:
-
Paul Kocialkowski authored
There is no particular need to register the media device in the subdev notify complete callback. Register it in the v4l2 code instead where it's more in-context. Signed-off-by:
-
Paul Kocialkowski authored
The video structure is part of the main csi device structure, so pass pointers to that top-level structure directly. This makes it easier to navigate and access other elements. No functional change intended. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
-
Paul Kocialkowski authored
Some code cleanups, renames, variable lowerings and moving things around for better organization. No functional change intended. Signed-off-by:
-
Paul Kocialkowski authored
Various cosmetic improvements to the v4l2 registration code, with renames, lowerings, etc. The cleanup function is moved down after setup. No functional change intended. Signed-off-by:
-
Paul Kocialkowski authored
Update the option title and help, group related options together, add dependency on VIDEO_DEV since the driver uses it and update the description. Signed-off-by:
-
Paul Kocialkowski authored
Wrap the clock and reset preparation into runtime pm functions for better organization of the code. Also fix the clock and reset enable order to first deassert reset, as recommended in Allwinner literature. Make the driver depend on PM while at it since runtime pm is mandatory for the driver to work. Signed-off-by:
-
Paul Kocialkowski authored
Introduce a proper variant structure with the module clock rate instead of hardcoding it with a manual check on the compatible. Signed-off-by:
-
Paul Kocialkowski authored
In some situations the default rate of the module clock is not the required one for operation (for example when reconfiguring the clock tree to use a different parent). As a result, always set the correct rate for the clock (and take care of cleanup). Signed-off-by:
-
Paul Kocialkowski authored
Various renames, variables lowering and other cosmetic changes in the platform-support code. No functional change intended. Signed-off-by:
-
Paul Kocialkowski authored
Merge contents of structs sun6i_csi and sun6i_csi_dev into a main sun6i_csi_device structure holding a sun6i_csi_v4l2 struct for things related to v4l2, as well as the already-existing sun6i_csi_video and sun6i_csi_config which are left unchanged. This mostly simplifies accessing stuff by having a single main structure accessible to every part of the code instead of a private definition. Also solve some kerneldoc warnings by describing return codes while at it. No functional change is intended in this commit, variables are just moved around (cosmetics). Signed-off-by:
-
Paul Kocialkowski authored
Add proper defines for driver name and description instead of MODULE_NAME and hardcoding (cosmetics). Also rework the description while at it to mention the hardware generation that the driver supports and remove the video capture mentions since it applies to the whole media device. Signed-off-by:
-
Paul Kocialkowski authored
The driver relies on the reset controller API to work, so add RESET_CONTROLLER as one of its Kconfig dependencies. Fixes: 50e76151 ("media: platform: Add Cedrus VPU decoder driver") Signed-off-by:
-
Paul Kocialkowski authored
The driver relies on the reset controller API to work, so add RESET_CONTROLLER as one of its Kconfig dependencies. Fixes: d77182ad ("media: sun8i: Add Allwinner A83T Rotate driver") Signed-off-by:
-
Paul Kocialkowski authored
The driver relies on the reset controller API to work, so add RESET_CONTROLLER as one of its Kconfig dependencies. Fixes: a4260ea4 ("media: sun4i: Add H3 deinterlace driver") Signed-off-by:
-
Paul Kocialkowski authored
The driver relies on the reset controller API to work, so add RESET_CONTROLLER as one of its Kconfig dependencies. Fixes: 577bbf23 ("media: sunxi: Add A10 CSI driver") Signed-off-by:
-
Paul Kocialkowski authored
The driver relies on the reset controller API to work, so add RESET_CONTROLLER as one of its Kconfig dependencies. Fixes: 5cc7522d ("media: sun6i: Add support for Allwinner CSI V3s") Signed-off-by:
-
Paul Kocialkowski authored
The driver relies on the reset controller API to work, so add RESET_CONTROLLER as one of its Kconfig dependencies. Fixes: 576d196c ("media: sunxi: Add support for the A83T MIPI CSI-2 controller") Signed-off-by:
-
Paul Kocialkowski authored
The driver relies on the reset controller API to work, so add RESET_CONTROLLER as one of its Kconfig dependencies. It also selects PHY_SUN6I_MIPI_DPHY, which depends on RESET_CONTROLLER. Fixes: af54b4f4 ("media: sunxi: Add support for the A31 MIPI CSI-2 controller") Signed-off-by:
kernel test robot <lkp@intel.com> Acked-by:
-
ye xingchen authored
Return the value venus_hfi_create() directly instead of storing it in another redundant variable. Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Stanimir Varbanov authored
The HDR10 PQ SEI should be set only when the codec is HEVC and the profile is MAIN10, otherwise some artefacts could be produced on the encoded bitstream. Signed-off-by:
-
Stanimir Varbanov authored
Add default value for CLL info when creating compound control. Signed-off-by:
-
Vikash Garodia authored
Control MIN/MAX range defined as 0 to 1, as MIN value setting enabled for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM. error details: fail: v4l2-test-controls.cpp(516): invalid maximum range check Signed-off-by:
Viswanath Boma <quic_vboma@quicinc.com> Signed-off-by:
Vikash Garodia <vgarodia@qti.qualcomm.com> Signed-off-by:
Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by:
-
Viswanath Boma authored
v4l2 compliance expecting settings for out buffer only and the same values will be propagated to capture buffer setting by h/w encoder . settings on cpature plane are optional , required only if offline-encoding supports. error details : fail: v4l2-test-formats.cpp(1350): !ret Signed-off-by:
Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by:
-
Dikshita Agarwal authored
v4l2 compliance expecting support for vidioc_try_encoder_cmd . error details : test VIDIOC_(TRY_)ENCODER_CMD: FAIL Signed-off-by:
-
Viswanath Boma authored
V4l2 encoder compliance expecting End of stream Event registration support for Encoder. Signed-off-by:
Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by:
-
Stanimir Varbanov authored
V4l2 encoder compliance set-format test cases failing as Capture plane width/height not aligned to OUT plane . Signed-off-by:
-
Viswanath Boma authored
V4l2 encoder compliance expecting minimum buffers support for the application to allocate buffers as per the control support values. Signed-off-by:
-
Stanimir Varbanov authored
V4l2 encoder compliance expecting default values of colorimetry for the control. Signed-off-by:
-
Bryan O'Donoghue authored
HFI_VERSION_1XX uses HFI_BUFFER_OUTPUT not HFI_BUFFER_OUTPUT2 for decoder buffers. venus_helper_check_format() places a constraint on an output buffer to be of type HFI_BUFFER_OUTPUT2. HFI_1XX uses HFI_BUFFER_OUTPUT though. Switching to the logic used in venus_helper_get_out_fmts() first checking for HFI_BUFFER_OUTPUT and then HFI_BUFFER_OUTPUT2 resolves on HFI_1XX. db410c before: root@linaro-alip:~# v4l2-ctl -d /dev/video0 --list-formats ioctl: VIDIOC_ENUM_FMT Type: Video Capture Multiplanar [0]: 'MPG4' (MPEG-4 Part 2 ES, compressed) [1]: 'H263' (H.263, compressed) [2]: 'H264' (H.264, compressed) [3]: 'VP80' (VP8, compressed) root@linaro-alip:~# v4l2-ctl -d /dev/video1 --list-formats ioctl: VIDIOC_ENUM_FMT Type: Video Capture Multiplanar db410c after: root@linaro-alip:~# v4l2-ctl -d /dev/video0 --list-formats ioctl: VIDIOC_ENUM_FMT Type: Video Capture Multiplanar [0]: 'MPG4' (MPEG-4 Part 2 ES, compressed) [1]: 'H263' (H.263, compressed) [2]: 'H264' (H.264, compressed) [3]: 'VP80' (VP8, compressed) root@linaro-alip:~# v4l2-ctl -d /dev/video1 --list-formats ioctl: VIDIOC_ENUM_FMT Type: Video Capture Multiplanar [0]: 'NV12' (Y/CbCr 4:2:0) Validated playback with ffplay on db410c with h264 and vp8 decoding. Fixes: 9593126d ("media: venus: Add a handling of QC08C compressed format") Cc: stable@vger.kernel.org # v5.19 Signed-off-by:Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
-
Bryan O'Donoghue authored
Debugging the decoder on msm8916 I noticed the vdec probe was crashing if the fmt pointer was NULL. A similar fix from Colin Ian King found by Coverity was implemented for the encoder. Implement the same fix on the decoder. Fixes: 7472c1c6 ("[media] media: venus: vdec: add video decoder files") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by:
-
Daniel González Cabanelas authored
The PCI hybrid card NotOnlyTV LV3H has a built-in IR receiver connected via I2C bus, currently not supported. This receiver is probably present in more Geniatech cards. It has no capability for repeating when a key is held down. Add support for this built-in IR receiver. Use the existing Total Media In Hand_02 remote keytable (Geniatech Mygica X8507) which matches exactly the LV3H remote. Signed-off-by:
Daniel González Cabanelas <dgcbueu@gmail.com> Signed-off-by:
Marek Kidawski <mark_kiddy@wp.pl> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Christophe JAILLET authored
Release some resources in the error handling path of the probe and of sun6i_mipi_csi2_resources_setup(), as already done in the remove function. Fixes: af54b4f4 ("media: sunxi: Add support for the A31 MIPI CSI-2 controller") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
-
Christophe JAILLET authored
Release some resources in the error handling path of the probe and of sun8i_a83t_mipi_csi2_resources_setup(), as already done in the remove function. Fixes: 576d196c ("media: sunxi: Add support for the A83T MIPI CSI-2 controller") Signed-off-by:
-
Mauro Carvalho Chehab authored
Fixes this Werror breakage: drivers/staging/media/atomisp/pci/atomisp_ioctl.c: In function 'atomisp_streamon': drivers/staging/media/atomisp/pci/atomisp_ioctl.c:1714:44: error: variable 'sink' set but not used [-Werror=unused-but-set-variable] 1714 | struct v4l2_mbus_framefmt *sink; | ^~~~ Signed-off-by: -
Andy Shevchenko authored
The camera_sensor_csi() is not used outside the module, hence make it static. While at it, split it to _alloc() and _free() to clearly show the idea behind the last parameter @flag that is passed to gmin_csi_cfg(). Link: https://lore.kernel.org/r/20220730162027.1011-1-andriy.shevchenko@linux.intel.comSigned-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
atomisp_source_pad_to_stream_id() returns ATOMISP_INPUT_STREAM_GENERAL unconditionally now. Drop it and directly use ATOMISP_INPUT_STREAM_GENERAL in its callers. Signed-off-by:
-
Hans de Goede authored
The code checks a camera_caps struct in various places, but this always points to the same const camera_caps struct. Remove the checks, keeping the code paths which would be taken with the fixed camera caps struct still in place and remove the camera_caps struct itself. Note this completely removes atomisp_pause_buffer_event() because that only ever does something if camera_caps.sensors[0].is_slave is true and that never is true. Reviewed-by:
-
