- 03 Aug, 2023 12 commits
-
-
Dmitry Antipov authored
In ath12k_mac_vif_unref() dp->tx_desc_used_list[i] is not altered so list_for_each_entry() should be safe. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230704173718.73462-1-dmantipov@yandex.ru
-
Aloka Dixit authored
Enable the feature flag to indicate the driver support for preamble puncturing. Firmware will support this feature by default from IEEE 802.11be onwards. Configure the bitmap as part of VDEV start/restart and peer association commands. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by:
Muna Sinada <quic_msinada@quicinc.com> Signed-off-by:
-
Aloka Dixit authored
Parse WMI service ready ext2 event. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Pradeep Kumar Chitrapu authored
Add tags with length 0 for MLO header and partner links which are required by the firmware for a successful association. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by:
-
Aloka Dixit authored
Add required peer association definitions and processing if the bandwidth is 320 MHz. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aloka Dixit authored
Add new WMI tag and pass the EHT parameters for peer association to firmware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aloka Dixit authored
Add new parameters and prepare the association data for an EHT peer. MCS data uses the format described in IEEE P802.11be/D2.0, May 2022, 9.4.2.313.4, convert it into the format expected by the firmware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Muna Sinada authored
Add support to retrieve and configure the phy modes supported by the hardware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aloka Dixit authored
Propagate EHT capabilities to the userspace using a new member 'eht_cap' in structure ieee80211_sband_iftype_data. MCS-NSS capabilities are copied depending on the supported bandwidths for the given band. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aloka Dixit authored
Add WMI support to process the EHT capabilities passed by the firmware. Add required EHT specific definitions in structures ath12k_band_cap and ath12k_wmi_svc_rdy_ext_parse. For single_pdev chip such as WCN7850, only one pdev is created and only one hardware is registered to mac80211. This one pdev manages both 2.4 GHz radio and 5 GHz/6 GHz radio. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
Wen Gong <quic_wgong@quicinc.com> Signed-off-by:
-
Aloka Dixit authored
The function ath12k_mac_copy_sband_iftype_data() is currently used HE capabilities propagation but it can be extended to include EHT data. Move the HE specific functionality from to ath12k_mac_copy_he_cap() to make EHT additions easier. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Aloka Dixit authored
Functions ath12k_mac_setup_he_cap() and ath12k_mac_copy_he_cap() propagate HE and 6GHz capabilities to the userspace using an instance of struct ieee80211_sband_iftype_data. This structure now has a new member 'eht_cap' to include EHT capabilities as well. Rename the above mentioned functions to indicate that their use is not limited to HE. Also, replace the local variable 'band' with 'sband' and reuse 'band' for the type enum nl80211_band. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
- 02 Aug, 2023 12 commits
-
-
Wen Gong authored
Currently there are about 60 channels for 6 GHz, then the size of chan_list in struct scan_req_params which is 40 is not enough to fill all the channel list of 6 GHz. Use dynamic memory to save the channel list of scan. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Wen Gong authored
Currently after the hardware restart triggered from the driver, the station interface connection remains intact, since a disconnect trigger is not sent to userspace. This can lead to a problem in targets where the wifi mac sequence is added by the firmware. After the target restart, its wifi mac sequence number gets reset to zero. Hence AP to which our device is connected will receive frames with a wifi mac sequence number jump to the past, thereby resulting in the AP dropping all these frames, until the frame arrives with a wifi mac sequence number which AP was expecting. To avoid such frame drops, its better to trigger a station disconnect upon target hardware restart which can be done with API ieee80211_reconfig_disconnect exposed to mac80211. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Baochen Qiang authored
We are seeing kernel crash in below test scenario: 1. make DUT connect to an WPA3 encrypted 11ax AP in Ch44 HE80 2. use "wpa_cli -i <inf> disconnect" to disconnect 3. wait for DUT to automatically reconnect Kernel crashes while waiting, below shows the crash stack: [ 755.120868] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 755.120871] #PF: supervisor read access in kernel mode [ 755.120872] #PF: error_code(0x0000) - not-present page [ 755.120873] PGD 0 P4D 0 [ 755.120875] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 755.120876] CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 5.19.0-rc1+ #3 [ 755.120878] Hardware name: Intel(R) Client Systems NUC11PHi7/NUC11PHBi7, BIOS PHTGL579.0063.2021.0707.1057 07/07/2021 [ 755.120879] RIP: 0010:ath12k_dp_process_rx_err+0x2b6/0x14a0 [ath12k] [ 755.120890] Code: 01 c0 48 c1 e0 05 48 8b 9c 07 b8 b2 00 00 48 c7 c0 61 ff 0e c1 48 85 db 53 48 0f 44 c6 48 c7 c6 80 9d 0f c1 50 e8 1a 25 00 00 <4c> 8b 3b 4d 8b 76 14 41 59 41 5a 41 8b 87 78 43 01 00 4d 85 f6 89 [ 755.120891] RSP: 0018:ffff9a93402c8d10 EFLAGS: 00010282 [ 755.120892] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000303 [ 755.120893] RDX: 0000000000000000 RSI: ffffffff93b7cbe9 RDI: 00000000ffffffff [ 755.120894] RBP: ffff9a93402c8e50 R08: ffffffff93e65360 R09: ffffffff942e044d [ 755.120894] R10: 0000000000000000 R11: 0000000000000063 R12: ffff8dbec5420000 [ 755.120895] R13: ffff8dbec5420000 R14: ffff8dbdefe9a0a0 R15: ffff8dbec5420000 [ 755.120896] FS: 0000000000000000(0000) GS:ffff8dc2705c0000(0000) knlGS:0000000000000000 [ 755.120897] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 755.120898] CR2: 0000000000000000 CR3: 0000000107be4005 CR4: 0000000000770ee0 [ 755.120898] PKRU: 55555554 [ 755.120899] Call Trace: [ 755.120900] <IRQ> [ 755.120903] ? ath12k_pci_write32+0x2e/0x80 [ath12k] [ 755.120910] ath12k_dp_service_srng+0x214/0x2e0 [ath12k] [ 755.120917] ath12k_pci_ext_grp_napi_poll+0x26/0x80 [ath12k] [ 755.120923] __napi_poll+0x2b/0x1c0 [ 755.120925] net_rx_action+0x2a1/0x2f0 [ 755.120927] __do_softirq+0xfa/0x2e9 [ 755.120929] irq_exit_rcu+0xb9/0xd0 [ 755.120932] common_interrupt+0xc1/0xe0 [ 755.120934] </IRQ> [ 755.120934] <TASK> [ 755.120935] asm_common_interrupt+0x2c/0x40 [ 755.120936] RIP: 0010:cpuidle_enter_state+0xdd/0x3a0 [ 755.120938] Code: 00 31 ff e8 45 e2 74 ff 80 7d d7 00 74 16 9c 58 0f 1f 40 00 f6 c4 02 0f 85 a0 02 00 00 31 ff e8 69 79 7b ff fb 0f 1f 44 00 00 <45> 85 ff 0f 88 6d 01 00 00 49 63 d7 4c 2b 6d c8 48 8d 04 52 48 8d [ 755.120939] RSP: 0018:ffff9a934018be50 EFLAGS: 00000246 [ 755.120940] RAX: ffff8dc2705c0000 RBX: 0000000000000002 RCX: 000000000000001f [ 755.120941] RDX: 000000afd0b532d3 RSI: ffffffff93b7cbe9 RDI: ffffffff93b8b66e [ 755.120942] RBP: ffff9a934018be88 R08: 0000000000000002 R09: 0000000000030500 [ 755.120942] R10: ffff9a934018be18 R11: 0000000000000741 R12: ffffba933fdc0600 [ 755.120943] R13: 000000afd0b532d3 R14: ffffffff93fcbc60 R15: 0000000000000002 [ 755.120945] cpuidle_enter+0x2e/0x40 [ 755.120946] call_cpuidle+0x23/0x40 [ 755.120948] do_idle+0x1ff/0x260 [ 755.120950] cpu_startup_entry+0x1d/0x20 [ 755.120951] start_secondary+0x10d/0x130 [ 755.120953] secondary_startup_64_no_verify+0xd3/0xdb [ 755.120956] </TASK> [ 755.120956] Modules linked in: michael_mic rfcomm cmac algif_hash algif_skcipher af_alg bnep qrtr_mhi intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio kvm_intel qrtr snd_hda_codec_hdmi kvm irqbypass ath12k snd_hda_intel snd_seq_midi crct10dif_pclmul mhi ghash_clmulni_intel snd_intel_dspcfg snd_seq_midi_event aesni_intel qmi_helpers i915 snd_rawmidi crypto_simd snd_hda_codec cryptd cec intel_cstate snd_hda_core mac80211 rc_core nouveau snd_seq snd_hwdep btusb drm_buddy drm_ttm_helper nls_iso8859_1 snd_pcm ttm btrtl snd_seq_device wmi_bmof mxm_wmi input_leds cfg80211 joydev btbcm drm_display_helper snd_timer btintel mei_me libarc4 drm_kms_helper bluetooth i2c_algo_bit snd fb_sys_fops syscopyarea mei sysfillrect ecdh_generic soundcore sysimgblt ecc acpi_pad mac_hid sch_fq_codel ipmi_devintf ipmi_msghandler msr parport_pc ppdev lp ramoops parport reed_solomon drm efi_pstore ip_tables x_tables autofs4 [ 755.120992] hid_generic usbhid hid ax88179_178a usbnet mii nvme nvme_core rtsx_pci_sdmmc crc32_pclmul i2c_i801 intel_lpss_pci i2c_smbus intel_lpss rtsx_pci idma64 virt_dma vmd wmi video [ 755.121002] CR2: 0000000000000000 The crash is because, for WCN7850, only ab->pdev[0] is initialized, while mac_id here is misused to retrieve pdev and it is not zero, leading to a NULL pointer access. Fix this issue by getting pdev_id first and then use it to retrieve pdev. Also fix some other code snippets which have the same issue. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by:
-
Wen Gong authored
Currently ath12k define WMI_HOST_HW_MODE_DBS_OR_SBS=5 as max hw mode for enum wmi_host_hw_mode_config_type, it is also same for the array ath12k_hw_mode_pri_map. When tested with new version firmware/board data which support new hw mode eMLSR mode with hw mode value 8, it leads overflow usage for array ath12k_hw_mode_pri_map in function ath12k_wmi_hw_mode_caps(), and then lead preferred_hw_mode changed to 8, and finally function ath12k_pull_mac_phy_cap_svc_ready_ext() select the capability of hw mode 8, but the capability of eMLSR mode report from firmware does not support 2.4 GHz band for WCN7850, so finally 2.4 GHz band is disabled. Skip the hw mode which exceeds WMI_HOST_HW_MODE_MAX in function ath12k_wmi_hw_mode_caps() helps to avoid array overflow, then the 2.4 GHz band will not be disabled. This is to keep compatibility with newer version firmware/board data files, this change is still needed after ath12k add eMLSR hw mode 8 in array ath12k_hw_mode_pri_map and enum wmi_host_hw_mode_config_type, because more hw mode maybe added in next firmware/board data version e.g hw mode 9, then it will also lead new array overflow without this change. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Arnd Bergmann authored
Two memory copies in this function copy from a short array into a longer one, using the wrong size, which leads to an out-of-bounds access: include/linux/fortify-string.h:592:4: error: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror,-Wattribute-warning] __read_overflow2_field(q_size_field, size); ^ include/linux/fortify-string.h:592:4: error: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror,-Wattribute-warning] 2 errors generated. Fixes: d8899132 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Wen Gong authored
Currently, the encoding rule for field mlo_capable in struct qmi_wlanfw_host_cap_req_msg_v01 defined in array qmi_wlanfw_host_cap_req_msg_v01_ei uses type QMI_OPT_FLAG. Unfortunately, all ath12k firmware actually expects this field to be of type NON QMI_OPT_FLAG such as QMI_UNSIGNED_1_BYTE/QMI_UNSIGNED_8_BYTE... And as a result, firmware is unable to correctly decode the mlo_capable field. Change the ath12k definition as QMI_UNSIGNED_1_BYTE to match the firmware definition so that firmware can correctly parse the mlo_capable info from message QMI_WLANFW_HOST_CAP_REQ_V01 at wlan load time. This is just an accidental typo and that both WCN7850 and QCN9274 firmwares use QMI_UNSIGNED_1_BYTE. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Wen Gong authored
In ath12k_mac_op_hw_scan(), the return value of kzalloc() is directly used in memcpy(), which may lead to a NULL pointer dereference on failure of kzalloc(). Fix this bug by adding a check of arg.extraie.ptr. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by:
-
Seevalamuthu Mariappan authored
In some race conditions, calibration done QMI message is received even before host wait starts for calibration to be done. Due to this, resetting firmware was not performed after calibration. Hence, remove cal_done check in ath11k_qmi_fwreset_from_cold_boot() as this is called only from probe. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Seevalamuthu Mariappan <quic_seevalam@quicinc.com> Signed-off-by:
Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by:
-
Anilkumar Kolli authored
QCN9074 supports 6 GHz, which has increased number of channels compared to 5 GHz/2 GHz. So, to support coldboot calibration in QCN9074 ATH11K_COLD_BOOT_FW_RESET_DELAY extended to 60 seconds. To avoid code redundancy, fwreset_from_cold_boot moved to QMI and made common for both ahb and pci. Coldboot calibration is enabled only in FTM mode for QCN9074. QCN9074 requires firmware restart after coldboot, hence enable cbcal_restart_fw in hw_params. This support can be enabled/disabled using hw params for different hardware. Currently it is not enabled for QCA6390. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by:
Anilkumar Kolli <quic_akolli@quicinc.com> Signed-off-by:
-
Seevalamuthu Mariappan authored
QCN9074 enables coldboot calibration only in Factory Test Mode (FTM). Hence, split cold_boot_calib to two hw_params for mission and FTM mode. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by:
-
Dmitry Antipov authored
In ath11k_mac_validate_vht_he_fixed_rate_settings() ar->ab->peers list is not altered so list_for_each_entry() should be safe. Compile tested only. Signed-off-by:
-
Aditya Kumar Singh authored
5 GHz band channel 177 support was added with the commit e5e94d10 ("wifi: ath11k: add channel 177 into 5 GHz channel list"). However, during processing for the received ppdu in ath11k_dp_rx_h_ppdu(), channel number is checked only till 173. This leads to driver code checking for channel and then fetching the band from it which is extra effort since firmware has already given the channel number in the metadata. Fix this issue by checking the channel number till 177 since we support it now. Found via code review. Compile tested only. Fixes: e5e94d10 ("wifi: ath11k: add channel 177 into 5 GHz channel list") Signed-off-by:
Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by:
-
- 27 Jul, 2023 1 commit
-
-
Dmitry Antipov authored
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y, I've noticed the following: In function ‘fortify_memcpy_chk’, inlined from ‘wil_rx_crypto_check_edma’ at drivers/net/wireless/ath/wil6210/txrx_edma.c:566:2: ./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 529 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ where the compiler complains on: const u8 *pn; ... pn = (u8 *)&st->ext.pn_15_0; ... memcpy(cc->pn, pn, IEEE80211_GCMP_PN_LEN); and: In function ‘fortify_memcpy_chk’, inlined from ‘wil_rx_crypto_check’ at drivers/net/wireless/ath/wil6210/txrx.c:684:2: ./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 529 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ where the compiler complains on: const u8 *pn = (u8 *)&d->mac.pn_15_0; ... memcpy(cc->pn, pn, IEEE80211_GCMP_PN_LEN); In both cases, the fortification logic interprets 'memcpy()' as 6-byte overread of 2-byte field 'pn_15_0' of 'struct wil_rx_status_extension' and 'pn_15_0' of 'struct vring_rx_mac', respectively. To silence these warnings, last two fields of the aforementioned structures are grouped using 'struct_group_attr(pn, __packed' quirk. Signed-off-by:
-
- 25 Jul, 2023 5 commits
-
-
Dongliang Mu authored
Smatch reports: ath_pci_probe() warn: argument 4 to %lx specifier is cast from pointer ath_ahb_probe() warn: argument 4 to %lx specifier is cast from pointer Fix it by modifying %lx to %p in the printk format string. Note that with this change, the pointer address will be printed as a hashed value by default. This is appropriate because the kernel should not leak kernel pointers to user space in an informational message. If someone wants to see the real address for debugging purposes, this can be achieved with the no_hash_pointers kernel option. Signed-off-by:
Dongliang Mu <dzm91@hust.edu.cn> Acked-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
Wang Ming authored
It is expected that most callers should _ignore_ the errors return by debugfs_create_dir() in ath6kl_debug_init_fs(). Signed-off-by:
Wang Ming <machel@vivo.com> Signed-off-by:
-
Minjie Du authored
'phydir' returned from debugfs_create_dir() is checked against NULL. As the debugfs API returns an error pointer, the returned value can never be NULL. Therefore, as the documentation suggests that the check is unnecessary and other debugfs calls have no operation in error cases, it is advisable to completely eliminate the check. Signed-off-by:
Minjie Du <duminjie@vivo.com> Reviewed-by:
Jiri Slaby <jirislaby@kernel.org> Signed-off-by:
-
Dmitry Antipov authored
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y, I've noticed the following: In function ‘fortify_memcpy_chk’, inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:556:4, inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3: ./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 529 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘fortify_memcpy_chk’, inlined from ‘ath_tx_count_frames’ at drivers/net/wireless/ath/ath9k/xmit.c:473:3, inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:572:2, inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3: ./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 529 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In both cases, the compiler complains on: memcpy(ba, &ts->ba_low, WME_BA_BMP_SIZE >> 3); which is the legal way to copy both 'ba_low' and following 'ba_high' members of 'struct ath_tx_status' at once (that is, issue one 8-byte 'memcpy()' for two 4-byte fields). Since the fortification logic seems interprets this trick as an attempt to overread 4-byte 'ba_low', silence relevant warnings by using the convenient 'struct_group()' quirk. Suggested-by:Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Dmitry Antipov authored
In 'ath_tx_count_frames()', 'ba' array may be used uninitialized, so add 'memset()' call similar to one used in 'ath_tx_complete_aggr()'. Signed-off-by:
-
- 24 Jul, 2023 1 commit
-
-
Eric Dumazet authored
IPv6 inet sockets are supposed to have a "struct ipv6_pinfo" field at the end of their definition, so that inet6_sk_generic() can derive from socket size the offset of the "struct ipv6_pinfo". This is very fragile, and prevents adding bigger alignment in sockets, because inet6_sk_generic() does not work if the compiler adds padding after the ipv6_pinfo component. We are currently working on a patch series to reorganize TCP structures for better data locality and found issues similar to the one fixed in commit f5d54767 ("tcp: fix tcp_inet6_sk() for 32bit kernels") Alternative would be to force an alignment on "struct ipv6_pinfo", greater or equal to __alignof__(any ipv6 sock) to ensure there is no padding. This does not look great. v2: fix typo in mptcp_proto_v6_init() (Paolo) Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Chao Wu <wwchao@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: YiFei Zhu <zhuyifei@google.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 23 Jul, 2023 9 commits
-
-
Patrick Rohr authored
This change adds a new sysctl accept_ra_min_rtr_lft to specify the minimum acceptable router lifetime in an RA. If the received RA router lifetime is less than the configured value (and not 0), the RA is ignored. This is useful for mobile devices, whose battery life can be impacted by networks that configure RAs with a short lifetime. On such networks, the device should never gain IPv6 provisioning and should attempt to drop RAs via hardware offload, if available. Signed-off-by:
Patrick Rohr <prohr@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
justinstitt@google.com authored
`strncpy` is deprecated for use on NUL-terminated destination strings [1]. Even call sites utilizing length-bounded destination buffers should switch over to using `strtomem` or `strtomem_pad`. In this case, however, the compiler is unable to determine the size of the `data` buffer which renders `strtomem` unusable. Due to this, `strscpy` should be used. It should be noted that most call sites already zero-initialize the destination buffer. However, I've opted to use `strscpy_pad` to maintain the same exact behavior that `strncpy` produced (zero-padded tail up to `len`). Also see [3]. [1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [2]: elixir.bootlin.com/linux/v6.3/source/net/ethtool/ioctl.c#L1944 [3]: manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html Link: https://github.com/KSPP/linux/issues/90Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Justin Stitt <justinstitt@google.com> Signed-off-by:
-
David S. Miller authored
Anjali Kulkarni says: ==================== Process connector bug fixes & enhancements Oracle DB is trying to solve a performance overhead problem it has been facing for the past 10 years and using this patch series, we can fix this issue. Oracle DB runs on a large scale with 100000s of short lived processes, starting up and exiting quickly. A process monitoring DB daemon which tracks and cleans up after processes that have died without a proper exit needs notifications only when a process died with a non-zero exit code (which should be rare). Due to the pmon architecture, which is distributed, each process is independent and has minimal interaction with pmon. Hence fd based solutions to track a process's spawning and exit cannot be used. Pmon needs to detect the abnormal death of a process so it can cleanup after. Currently it resorts to checking /proc every few seconds. Other methods we tried like using system call to reduce the above overhead were not accepted upstream. With this change, we add event based filtering to proc connector module so that DB can only listen to the events it is interested in. A new event type PROC_EVENT_NONZERO_EXIT is added, which is only sent by kernel to a listening application when any process exiting has a non-zero exit status. This change will give Oracle DB substantial performance savings - it takes 50ms to scan about 8K PIDs in /proc, about 500ms for 100K PIDs. DB does this check every 3 secs, so over an hour we save 10secs for 100K PIDs. With this, a client can register to listen for only exit or fork or a mix or all of the events. This greatly enhances performance - currently, we need to listen to all events, and there are 9 different types of events. For eg. handling 3 types of events - 8K-forks + 8K-exits + 8K-execs takes 200ms, whereas handling 2 types - 8K-forks + 8K-exits takes about 150ms, and handling just one type - 8K exits takes about 70ms. Measuring the time using pidfds for monitoring 8K process exits took 4 times longer - 200ms, as compared to 70ms using only exit notifications of proc connector. Hence, we cannot use pidfd for our use case. This kind of a new event could also be useful to other applications like Google's lmkd daemon, which needs a killed process's exit notification. This patch series is organized as follows - Patch 1 : Needed for patch 3 to work. Patch 2 : Needed for patch 3 to work. Patch 3 : Fixes some bugs in proc connector, details in the patch. Patch 4 : Adds event based filtering for performance enhancements. Patch 5 : Allow non-root users access to proc connector events. Patch 6 : Selftest code for proc connector. v9->v10 changes: - Rebased to net-next, re-compiled and re-tested. v8->v9 changes: - Added sha1 ("title") of reversed patch as suggested by Eric Dumazet. v7->v8 changes: - Fixed an issue pointed by Liam Howlett in v7. v6->v7 changes: - Incorporated Liam Howlett's comments on v6 - Incorporated Kalesh Anakkur Purayil's comments v5->v6 changes: - Incorporated Liam Howlett's comments - Removed FILTER define from proc_filter.c and added a "-f" run-time option to run new filter code. - Made proc_filter.c a selftest in tools/testing/selftests/connector v4->v5 changes: - Change the cover letter - Fix a small issue in proc_filter.c v3->v4 changes: - Fix comments by Jakub Kicinski to incorporate root access changes within bind call of connector v2->v3 changes: - Fix comments by Jakub Kicinski to separate netlink (patch 2) (after layering) from connector fixes (patch 3). - Minor fixes suggested by Jakub. - Add new multicast group level permissions check at netlink layer. Split this into netlink & connector layers (patches 6 & 7) v1->v2 changes: - Fix comments by Jakub Kicinski to keep layering within netlink and update kdocs. - Move non-root users access patch last in series so remaining patches can go in first. v->v1 changes: - Changed commit log in patch 4 as suggested by Christian Brauner - Changed patch 4 to make more fine grained access to non-root users - Fixed warning in cn_proc.c, Reported-by:kernel test robot <lkp@intel.com> - Fixed some existing warnings in cn_proc.c ==================== Signed-off-by:
-
Anjali Kulkarni authored
Run as ./proc_filter -f to run new filter code. Run without "-f" to run usual proc connector code without the new filtering code. Signed-off-by:
Anjali Kulkarni <anjali.k.kulkarni@oracle.com> Reviewed-by:
Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by:
-
Anjali Kulkarni authored
There were a couple of reasons for not allowing non-root users access initially - one is there was some point no proper receive buffer management in place for netlink multicast. But that should be long fixed. See link below for more context. Second is that some of the messages may contain data that is root only. But this should be handled with a finer granularity, which is being done at the protocol layer. The only problematic protocols are nf_queue and the firewall netlink. Hence, this restriction for non-root access was relaxed for NETLINK_ROUTE initially: https://lore.kernel.org/all/20020612013101.A22399@wotan.suse.de/ This restriction has also been removed for following protocols: NETLINK_KOBJECT_UEVENT, NETLINK_AUDIT, NETLINK_SOCK_DIAG, NETLINK_GENERIC, NETLINK_SELINUX. Since process connector messages are not sensitive (process fork, exit notifications etc.), and anyone can read /proc data, we can allow non-root access here. However, since process event notification is not the only consumer of NETLINK_CONNECTOR, we can make this change even more fine grained than the protocol level, by checking for multicast group within the protocol. Allow non-root access for NETLINK_CONNECTOR via NL_CFG_F_NONROOT_RECV but add new bind function cn_bind(), which allows non-root access only for CN_IDX_PROC multicast group. Signed-off-by:
-
Anjali Kulkarni authored
This patch adds the capability to filter messages sent by the proc connector on the event type supplied in the message from the client to the connector. The client can register to listen for an event type given in struct proc_input. This event based filteting will greatly enhance performance - handling 8K exits takes about 70ms, whereas 8K-forks + 8K-exits takes about 150ms & handling 8K-forks + 8K-exits + 8K-execs takes 200ms. There are currently 9 different types of events, and we need to listen to all of them. Also, measuring the time using pidfds for monitoring 8K process exits took much longer - 200ms, as compared to 70ms using only exit notifications of proc connector. We also add a new event type - PROC_EVENT_NONZERO_EXIT, which is only sent by kernel to a listening application when any process exiting, has a non-zero exit status. This will help the clients like Oracle DB, where a monitoring process wants notfications for non-zero process exits so it can cleanup after them. This kind of a new event could also be useful to other applications like Google's lmkd daemon, which needs a killed process's exit notification. The patch takes care that existing clients using old mechanism of not sending the event type work without any changes. cn_filter function checks to see if the event type being notified via proc connector matches the event type requested by client, before sending(matches) or dropping(does not match) a packet. Signed-off-by:
-
Anjali Kulkarni authored
The current proc connector code has the foll. bugs - if there are more than one listeners for the proc connector messages, and one of them deregisters for listening using PROC_CN_MCAST_IGNORE, they will still get all proc connector messages, as long as there is another listener. Another issue is if one client calls PROC_CN_MCAST_LISTEN, and another one calls PROC_CN_MCAST_IGNORE, then both will end up not getting any messages. This patch adds filtering and drops packet if client has sent PROC_CN_MCAST_IGNORE. This data is stored in the client socket's sk_user_data. In addition, we only increment or decrement proc_event_num_listeners once per client. This fixes the above issues. cn_release is the release function added for NETLINK_CONNECTOR. It uses the newly added netlink_release function added to netlink_sock. It will free sk_user_data. Signed-off-by:
-
Anjali Kulkarni authored
A new function netlink_release is added in netlink_sock to store the protocol's release function. This is called when the socket is deleted. This can be supplied by the protocol via the release function in netlink_kernel_cfg. This is being added for the NETLINK_CONNECTOR protocol, so it can free it's data when socket is deleted. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Anjali Kulkarni authored
To use filtering at the connector & cn_proc layers, we need to enable filtering in the netlink layer. This reverses the patch which removed netlink filtering - commit ID for that patch: 549017aa (netlink: remove netlink_broadcast_filtered). Signed-off-by:
-
