Add documentation for the interconnect and interconnect-names
properties for QSPI.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert QSPI bindings to DT schema format using json-schema.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert Renesas R-Car Thermal bindings documentation to json-schema.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Rob Herring <robh@kernel.org>

A rather straightforward conversion of the phy-mmp3-usb binding to DT
schema format using json-schema.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[robh: add additionalProperties]
Signed-off-by: Rob Herring <robh@kernel.org>

While the preferred vendor prefix is "marvell", "mrvl" is used by many
older bindings already. Add it, while also marking it deprecated.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Rob Herring <robh@kernel.org>

Add compatible strings for the boards we have in tree. At the same time,
fix the MMP3 compatible string: the preferred vendor name for Marvell is
"marvell", not "mrvl", and indeed "marvell,mmp3" has been actively used,
not "mrvl,mmp3".

Fixes: 95aecb71 ("dt-bindings: arm: mrvl: Document MMP3 compatible string")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rob Herring <robh@kernel.org>

The validation is unhappy about mmp3-dell-ariel declaring its
marvell,tauros3-cache node to be compatible with arm,pl310-cache:

  mmp3-dell-ariel.dt.yaml: cache-controller@d0020000: compatible:
       Additional items are not allowed ('arm,pl310-cache' was unexpected)
  mmp3-dell-ariel.dt.yaml: cache-controller@d0020000: compatible:
       ['marvell,tauros3-cache', 'arm,pl310-cache'] is too long

Let's allow this -- Tauros 3 is designed to be compatible with PL310.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[robh: fixup indentation]
Signed-off-by: Rob Herring <robh@kernel.org>

Setting 'additionalProperties: false' is frequently omitted, but is
important in order to check that there aren't extra undocumented
properties in a binding.

Ideally, we'd just add this automatically and make this the default, but
there's some cases where it doesn't work. For example, if a common
schema is referenced, then properties in the common schema aren't part
of what's considered for 'additionalProperties'. Also, sometimes there
are bus specific properties such as 'spi-max-frequency' that go into
bus child nodes, but aren't defined in the child node's schema.

So let's stick with the json-schema defined default and add
'additionalProperties: false' where needed. This will be a continual
review comment and game of wack-a-mole.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Stephen Boyd <sboyd@kernel.org> # clock
Acked-by: Lee Jones <lee.jones@linaro.org>

Numerous schemas are missing 'additionalProperties: false' statements which
ensures a binding doesn't have any extra undocumented properties or child
nodes. Fixing this reveals various missing properties, so let's fix all
those occurrences.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Stephen Boyd <sboyd@kernel.org> # clock
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: netdev@vger.kernel.org
Cc: Guillaume La Roque <glaroque@baylibre.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-iio@vger.kernel.org
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-clk@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: linux-amlogic@lists.infradead.org
Cc: linux-pm@vger.kernel.org
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-gpio@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-media@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>

The regex for child nodes doesn't match the example. This wasn't flagged
with 'additionalProperties: false' missing. The child node schema was also
incorrect with 'ranges' property as it applies to child nodes and should
be moved up to the parent node.

Fixes: 957fd69d ("dt-bindings: soc: qcom: add On Chip MEMory (OCMEM) bindings")
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: linux-arm-msm@vger.kernel.org

The 'adi,adxl345' definition is a duplicate as there's a full binding in:
Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml

The trivial-devices binding doesn't capture that 'adi,adxl346' has a
fallback compatible 'adi,adxl345', so let's add it to adi,adxl345.yaml.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: linux-iio@vger.kernel.org
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@kernel.org>

Convert stpmic1 bindings to json-schema.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>

As described above single-output clock provider should have
0 cells number, so let's fix it by using 0 as cells number.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Rob Herring <robh@kernel.org>

ENE Technology makes embedded controllers and perhaps other stuff. Their
web site is http://www.ene.com.tw/.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Rob Herring <robh@kernel.org>

Dell makes computers and perhaps other stuff. Their web site is
http://www.dell.com/.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Rob Herring <robh@kernel.org>

"SG Micro Corp (SGMICRO) specializes in high performance, high quality
analog IC design, marketing and sales." (http://www.sg-micro.com/)
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the serial slave-device Device Tree binding documentation to
json-schema, and incorporate it into the generic serial bindings.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the generic serial interface Device Tree binding documentation
to json-schema.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

'#address-cells' and '#size-cells' are needed in the same node (for the
child bus) as 'dma-ranges' in order to parse it. The kernel is more lax
and will walk up the tree to get the properties from a parent node, but
it's better to be explicit. dtc now does checks on 'dma-ranges' and is
more strict:

arch/arm/boot/dts/sun5i.dtsi:189.4-52: Warning (dma_ranges_format): \
/soc/dram-controller@1c01000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/sun8i-r40.dtsi:742.4-52: Warning (dma_ranges_format): \
/soc/dram-controller@1c62000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/sunxi-h3-h5.dtsi:563.4-52: Warning (dma_ranges_format): \
/soc/dram-controller@1c62000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1)

Cc: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

This adds the following commits from upstream:

87a656ae5ff9 check: Inform about missing ranges
73d6e9ecb417 libfdt: fix undefined behaviour in fdt_splice_()
2525da3dba9b Bump version to v1.6.0
62cb4ad286ff Execute tests on FreeBSD with Cirrus CI
1f9a41750883 tests: Allow running the testsuite on already installed binary / libraries
c5995ddf4c20 tests: Honour NO_YAML make variable
e4ce227e89d7 tests: Properly clean up .bak file from tests
9b75292c335c tests: Honour $(NO_PYTHON) flag from Makefile in run_tests.sh
6c253afd07d4 Encode $(NO_PYTHON) consistently with other variables
95ec8ef706bd tests: No need to explicitly pass $PYTHON from Make to run_tests.sh
2b5f62d109a2 tests: Let run_tests.sh run Python tests without Makefile assistance
76b43dcbd18a checks: Add 'dma-ranges' check
e5c92a4780c6 libfdt: Use VALID_INPUT for FDT_ERR_BADSTATE checks
e5cc26b68bc0 libfdt: Add support for disabling internal checks
28fd7590aad2 libfdt: Improve comments in some of the assumptions
fc207c32341b libfdt: Fix a few typos
0f61c72dedc4 libfdt: Allow exclusion of fdt_check_full()
f270f45fd5d2 libfdt: Add support for disabling ordering check/fixup
c18bae9a4c96 libfdt: Add support for disabling version checks
fc03c4a2e04e libfdt: Add support for disabling rollback handling
77563ae72b7c libfdt: Add support for disabling sanity checks
57bc6327b80b libfdt: Add support for disabling dtb checks
464962489dcc Add a way to control the level of checks in the code
0c5326cb2845 libfdt: De-inline fdt_header_size()
cc6a5a071504 Revert "yamltree: Ensure consistent bracketing of properties with phandles"
0e9225eb0dfe Remove redundant YYLOC global declaration
cab09eedd644 Move -DNO_VALGRIND into CPPFLAGS
0eb1cb0b531e Makefile: pass $(CFLAGS) also during dependency generation
Signed-off-by: Rob Herring <robh@kernel.org>

The Makefile.dtc and Makefile.libfdt fragments from upstream dtc aren't
used by the kernel build, so let's remove them and stop syncing them.
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the usb-connector.txt bindings file to YAML format. This allows
it to be used in dt_bindings_check verification. This patch was
born out of a patch series for the addition of a Type C connector
class port driver[1].

An attempt has been made to maintain the same documentation text and
example structure as was in the .txt file, but wherever needed
modifications have been made to satisfy dt_bindings_check.

Also, update all references to usb-connector.txt to now use
usb-connector.yaml.

[1]: https://lkml.org/lkml/2020/2/19/1232Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Kryo280 is found in msm8998, so add it to the list of cpu compatibles.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>

The description below is already in use for px30.dtsi,
but was somehow never added to a document, so add
"rockchip,px30-i2c", "rockchip,rk3399-i2c"
for i2c nodes on a px30 platform to i2c-rk3x.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The description below is already in use for rk3308.dtsi,
but was somehow never added to a document, so add
"rockchip,rk3308-i2c", "rockchip,rk3399-i2c"
for i2c nodes on a rk3308 platform to i2c-rk3x.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The description below is already in use for rk3368.dtsi,
but was somehow never added to a document, so add
"rockchip,rk3368-i2c", "rockchip,rk3288-i2c"
for i2c nodes on a rk3368 platform to i2c-rk3x.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The description below is already in use for rk3036.dtsi,
but was somehow never added to a document, so add
"rockchip,rk3036-i2c", "rockchip,rk3288-i2c"
for i2c nodes on a rk3036 platform to i2c-rk3x.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Current dts files with 'i2c' nodes are manually verified.
In order to automate this process i2c-rk3x.txt
has to be converted to yaml. In the new setup
i2c-rk3x.yaml will inherit properties from
i2c-controller.yaml.

Also change document name in MAINTAINERS.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert Renesas R-Car VIN bindings documentation to json-schema.

As the examples in the bindings now can be tested add a new one which
describes how the both a parallel and a CSI-2 source can be connected on
Gen3 SoCs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Rob Herring <robh@kernel.org>

A test with the command below gives these errors:

arch/arm64/boot/dts/rockchip/rk3308-evb.dt.yaml: serial@ff0d0000: compatible:
['rockchip,rk3308-uart', 'snps,dw-apb-uart']
is not valid under any of the given schemas
arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dt.yaml: serial@ff0a0000: compatible:
['rockchip,rk3308-uart', 'snps,dw-apb-uart']
is not valid under any of the given schemas

The compatible property for the Rockchip rk3308 uart was somehow never
added to the documention. Fix this error by adding 'rockchip,rk3308-uart'
to snps-dw-apb-uart.yaml.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/serial/
snps-dw-apb-uart.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

The hierarchical topology with power-domain should be described through
child nodes, rather than as currently described in the PSCI root node. Fix
this by adding a patternProperties with a corresponding reference to the
power-domain DT binding.

Additionally, update the example to conform to the new pattern, but also to
the adjusted domain-idle-state DT binding.

Fixes: a3f048b5 ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[robh: Add missing allOf, tweak power-domain node name]
Signed-off-by: Rob Herring <robh@kernel.org>

The existing binding requires the nodename to have a '@', which is a bit
limiting for the wider use case. Therefore, let's extend the pattern to
allow either '@' or '-'.

Fixes: a3f048b5 ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[robh: drop example change]
Signed-off-by: Rob Herring <robh@kernel.org>

Commit b30d8cf5 ("dt-bindings: opp: Convert Allwinner H6 OPP to a
schema") converted in Documentation/devicetree/bindings/opp/ the file
sun50i-nvmem-cpufreq.txt to allwinner,sun50i-h6-operating-points.yaml.

Since then, ./scripts/get_maintainer.pl --self-test complains:

  warning: no file matches \
  F: Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt

Adjust the file pattern in the ALLWINNER CPUFREQ DRIVER entry.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

This updates bindings for MT7629 pwm controller.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Shenzen Elida Technology Co. Ltd. is a Chinese TFT manufacturer.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the UniPhier System Cache binding to DT schema format.
This is a full-custom outer cache (L2 and L3) used on UniPhier
ARM 32-bit SoCs.

While I was here, I added the interrupts property. This is not
used in Linux, but the hardware has interrupt lines at least.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>

In preparation to add generic checks of compatible strings, drop
the compatible as '...' is not a valid compatible string.

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>

While converting to the json-schema, let's also take the opportunity to
further specify/clarify some more details about the DT binding.

For example, let's define the label where to put the states nodes, set a
pattern for nodename of the state nodes and finally add an example.

Fixes: a3f048b5 ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[robh: drop type refs from standard unit properties]
Signed-off-by: Rob Herring <robh@kernel.org>

Fixes: a3f048b5 ("dt: psci: Update DT bindings to support hierarchical PSCI states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>