- 11 Aug, 2020 6 commits
-
-
Roland Scheidegger authored
Same problem as in stdu, same fix. Fixes: 51f644b4 ("drm/atomic-helper: reset vblank on crtc reset") Acked-by:
Charmaine Lee <charmainel@vmware.com> Reviewed-by:
Zack Rusin <zackr@vmware.com> Signed-off-by:
Roland Scheidegger <sroland@vmware.com>
-
Roland Scheidegger authored
Same problem as in stdu, same fix. Fixes: 51f644b4 ("drm/atomic-helper: reset vblank on crtc reset") Acked-by:
-
Daniel Vetter authored
When converting to atomic the state reset was done by directly calling the functions, and before the modeset object was fully initialized. This means the various ->dev pointers weren't set up. After commit 51f644b4 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Jun 12 18:00:49 2020 +0200 drm/atomic-helper: reset vblank on crtc reset this started to oops because now we're trying to derefence drm_crtc->dev. Fix this up by entirely switching over to drm_mode_config_reset, called once everything is set up. Fixes: 51f644b4 ("drm/atomic-helper: reset vblank on crtc reset") Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Tested-by:
-
Dan Carpenter authored
These if statements are supposed to be true if we ended the list_for_each_entry() loops without hitting a break statement but they don't work. In the first loop, we increment "i" after the "if (i == unit)" condition so we don't necessarily know that "i" is not equal to unit at the end of the loop. In the second loop we exit when mode is not pointing to a valid drm_display_mode struct so it doesn't make sense to check "mode->type". Fixes: a278724a ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Dan Carpenter authored
The "entry" pointer is an offset from the list head and it doesn't point to a valid vmw_legacy_display_unit struct. Presumably the intent was to point to the last entry. Also the "i++" wasn't used so I have removed that as well. Fixes: d7e1958d ("drm/vmwgfx: Support older hardware.") Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
- 04 Aug, 2020 1 commit
-
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
Take 2 of msm-next pull, this version drops the OPP patch due to [1], so I'll send the gpu opp/bw scaling patch after the OPP patch lands. Since I had to force-push I took the opportunity to rebase on drm-next, and since you already merged in 5.8-rc6 a few fixes from the last cycle dropped out. This time around: * A bunch more a650/a640 (sm8150/sm8250) display and GPU enablement and fixes * Enable dpu dither block for 6bpc panels * dpu suspend fixes * dpu fix for cursor on 2nd display * dsi/mdp5 enablement for sdm630/sdm636/sdm660 I also regenerated the register headers, which accounts for a good bit of the size this time, because we hadn't re-synced the register headers since the early days of a6xx bringup. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGs_eswoX-E0Ddg5DoEQy35x3GG+6SDXUAjPMrtAWFkqng@mail.gmail.com
-
- 31 Jul, 2020 33 commits
-
-
Bernard authored
Use kthread_create_worker to simplify the code and optimise the manager struct: msm_drm_thread. With this change, we could remove struct element (struct task_struct *thread & struct kthread_worker worker), instead, use one point (struct kthread_worker *worker). Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
Rob Clark <robdclark@chromium.org>
-
Konrad Dybcio authored
This commit adds support for the MDP5 IP on Snapdragon 636/660. Signed-off-by:
Konrad Dybcio <konradybcio@gmail.com> Signed-off-by:
-
Konrad Dybcio authored
This also applies to sdm630/636 and their SDA counterparts. Signed-off-by:
-
Konrad Dybcio authored
This commit adds support for the MDP5 IP on Snapdragon 630. The configuration is different from SDM660's, as the latter one has two DSI outputs. Signed-off-by:
-
Konrad Dybcio authored
These SoCs make use of the 14nm phy, but at different addresses than other 14nm units. Signed-off-by:
-
Jonathan Marek authored
Initialize hardware clock-gating registers on A640 and A650 GPUs. At least for A650, this solves some performance issues. Signed-off-by:
Jonathan Marek <jonathan@marek.ca> Signed-off-by:
-
Jonathan Marek authored
This will allow supporting different hwcg tables for a6xx. Signed-off-by:
-
Jonathan Marek authored
This brings up basic video mode functionality for SM8250 DPU. Command mode and dual mixer/intf configurations are not working, future patches will address this. Scaler functionality and multiple planes is also untested. Signed-off-by:
-
Jonathan Marek authored
This brings up basic video mode functionality for SM8150 DPU. Command mode and dual mixer/intf configurations are not working, future patches will address this. Scaler functionality and multiple planes is also untested. Signed-off-by:
-
Jonathan Marek authored
Calculate the correct timings for displayport, from downstream driver. Signed-off-by:
-
Jonathan Marek authored
This fixes flushing of INTF_2 and INTF_3 on SM8150 and SM8250 hardware. Signed-off-by:
-
Jonathan Marek authored
The INTF_INPUT_CTRL feature is not available on sdm845, so don't set it. This also adds separate feature bits for INTF (based on downstream) instead of using CTL feature bit for it, and removes the unnecessary NULL check in the added bind_pingpong_blk function. Fixes: 73bfb790 ("msm:disp:dpu1: setup display datapath for SC7180 target") Signed-off-by:
-
Jonathan Marek authored
This isn't something that ever changes between planes, so move it to dpu_caps struct. Making this change will allow more re-use in the "SSPP sub blocks config" part of the catalog, in particular when adding support for SM8150 and SM8250 which have different max_linewidth. This also sets max_hdeci_exp/max_vdeci_exp to 0 for sc7180, as decimation is not supported on the newest DPU versions. (note that decimation is not implemented, so this changes nothing) Signed-off-by:
-
Jonathan Marek authored
Update the UBWC registers to the right values for sm8150 and sm8250. This removes broken dpu_hw_reset_ubwc, which doesn't work because the "force blk offset to zero to access beginning of register region" hack is copied from downstream, where mapped region starts 0x1000 below what is used in the upstream driver. Also simplifies the overly complicated change that was introduced in e4f9bbe9 to work around dpu_hw_reset_ubwc being broken. Signed-off-by:
-
Jonathan Marek authored
All DPU versions starting from 4.0 use the sdm845 version, so check for that instead of checking each version individually. This chooses the right function for sm8150 and sm8250. Signed-off-by:
-
Jonathan Marek authored
This is required for A640 and A650 to be able to share UBWC-compressed images with other HW such as display, which expect this configuration. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
-
Rob Clark authored
Small cleanup, lets not open-code bits/bitfields that are properly defined in the rnndb xml (and therefore have builders in the generated headers) Signed-off-by:
-
Rob Clark authored
We haven't sync'd for a while.. pull in updates to get definitions for some fields in pkt7 payloads. Signed-off-by:
-
Jonathan Marek authored
This sets up bw tables for A640/A650 similar to A618/A630, 0 DDR bandwidth vote, and the CNOC vote. A640 has the same CNOC addresses as A630 and was working, but this is required for A650 to work. Eventually the bw table should be filled by querying the interconnect driver for each BW in the dts, but use these dummy tables for now. Signed-off-by:
-
Jonathan Marek authored
A650 has a separate RSCC region, so dump RSCC registers separately, reading them from the RSCC base. Without this change a GPU hang will cause a system reset if CONFIG_DEV_COREDUMP is enabled. Signed-off-by:
-
Eric Anholt authored
We don't expect to find vbif_nrt or regdma on sdm845, but were clogging up dmesg with errors about it. Signed-off-by:
Eric Anholt <eric@anholt.net> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Eric Anholt authored
Nothing was using the lengths of these ioremaps. Signed-off-by:
-
Rob Clark authored
If split-lm is used (for ex, on sdm845), we can have multiple ping- pongs, but only a single phys encoder. We need to configure dithering on each of them. Signed-off-by:
Steev Klimaszewski <steev@kali.org> Reviewed-by:
Kalyan Thota <kalyan_t@codeaurora.org> Signed-off-by:
-
Akhil P Oommen authored
On targets where GMU is available, GMU takes over the ownership of GX GDSC during its initialization. So, move the refcount-get on GX PD before we initialize the GMU. This ensures that nobody can collapse the GX GDSC once GMU owns the GX GDSC. This patch fixes some GMU OOB errors seen during GPU wake up during a system resume. Reported-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
Akhil P Oommen <akhilpo@codeaurora.org> Tested-by:
-
Rajendra Nayak authored
On SDM845 and SC7180 DSI needs to express a performance state requirement on a power domain depending on the clock rates. Use OPP table from DT to register with OPP framework and use dev_pm_opp_set_rate() to set the clk/perf state. dev_pm_opp_set_rate() is designed to be equivalent to clk_set_rate() for devices without an OPP table, hence the change works fine on devices/platforms which only need to set a clock rate. Signed-off-by:
Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by:
-
Rajendra Nayak authored
On some qualcomm platforms DPU needs to express a performance state requirement on a power domain depending on the clock rates. Use OPP table from DT to register with OPP framework and use dev_pm_opp_set_rate() to set the clk/perf state. Signed-off-by:
-
Rob Clark authored
This can happen a lot when things go pear shaped. Lets not flood dmesg when this happens. Signed-off-by:
Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by:
-
Sharat Masetty authored
This patch changes the plumbing to send the devfreq recommended opp rather than the frequency. Also consolidate and rearrange the code in a6xx to set the GPU frequency and the icc vote in preparation for the upcoming changes for GPU->DDR scaling votes. Signed-off-by:
Sharat Masetty <smasetty@codeaurora.org> Signed-off-by:
-
Sharat Masetty authored
Update documentation to list the gpu opp table bindings including the newly added "opp-peak-kBps" needed for GPU-DDR bandwidth scaling. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Akhil P Oommen authored
Adding an msm_gem_object object to the inactive_list before completing its initialization is a bad idea because shrinker may pick it up from the inactive_list. Fix this by making sure that the initialization is complete before moving the msm_obj object to the inactive list. This patch fixes the below error: [10027.553044] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000068 [10027.573305] Mem abort info: [10027.590160] ESR = 0x96000006 [10027.597905] EC = 0x25: DABT (current EL), IL = 32 bits [10027.614430] SET = 0, FnV = 0 [10027.624427] EA = 0, S1PTW = 0 [10027.632722] Data abort info: [10027.638039] ISV = 0, ISS = 0x00000006 [10027.647459] CM = 0, WnR = 0 [10027.654345] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001e3a6a000 [10027.672681] [0000000000000068] pgd=0000000198c31003, pud=0000000198c31003, pmd=0000000000000000 [10027.693900] Internal error: Oops: 96000006 [#1] PREEMPT SMP [10027.738261] CPU: 3 PID: 214 Comm: kswapd0 Tainted: G S 5.4.40 #1 [10027.745766] Hardware name: Qualcomm Technologies, Inc. SC7180 IDP (DT) [10027.752472] pstate: 80c00009 (Nzcv daif +PAN +UAO) [10027.757409] pc : mutex_is_locked+0x14/0x2c [10027.761626] lr : msm_gem_shrinker_count+0x70/0xec [10027.766454] sp : ffffffc011323ad0 [10027.769867] x29: ffffffc011323ad0 x28: ffffffe677e4b878 [10027.775324] x27: 0000000000000cc0 x26: 0000000000000000 [10027.780783] x25: ffffff817114a708 x24: 0000000000000008 [10027.786242] x23: ffffff8023ab7170 x22: 0000000000000001 [10027.791701] x21: ffffff817114a080 x20: 0000000000000119 [10027.797160] x19: 0000000000000068 x18: 00000000000003bc [10027.802621] x17: 0000000004a34210 x16: 00000000000000c0 [10027.808083] x15: 0000000000000000 x14: 0000000000000000 [10027.813542] x13: ffffffe677e0a3c0 x12: 0000000000000000 [10027.819000] x11: 0000000000000000 x10: ffffff8174b94340 [10027.824461] x9 : 0000000000000000 x8 : 0000000000000000 [10027.829919] x7 : 00000000000001fc x6 : ffffffc011323c88 [10027.835373] x5 : 0000000000000001 x4 : ffffffc011323d80 [10027.840832] x3 : ffffffff0477b348 x2 : 0000000000000000 [10027.846290] x1 : ffffffc011323b68 x0 : 0000000000000068 [10027.851748] Call trace: [10027.854264] mutex_is_locked+0x14/0x2c [10027.858121] msm_gem_shrinker_count+0x70/0xec [10027.862603] shrink_slab+0xc0/0x4b4 [10027.866187] shrink_node+0x4a8/0x818 [10027.869860] kswapd+0x624/0x890 [10027.873097] kthread+0x11c/0x12c [10027.876424] ret_from_fork+0x10/0x18 [10027.880102] Code: f9000bf3 910003fd aa0003f3 d503201f (f9400268) [10027.886362] ---[ end trace df5849a1a3543251 ]--- [10027.891518] Kernel panic - not syncing: Fatal exception Signed-off-by:
-
Kalyan Thota authored
This change enables dither block for primary interface in display. Enabled for 6bpc in the current version. Changes in v1: - Remove redundant error checks (Rob). Signed-off-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by:
-
Rob Clark authored
If there is no interconnect-names, but there is an interconnects property, then of_icc_get(dev, "gfx-mem"); would return an error rather than NULL. Also, if there is no interconnect-names property, there will never be a ocmem path. But of_icc_get(dev, "ocmem") would return -EINVAL instead of -ENODATA. Just don't bother trying in this case. v2: explicity check for interconnect-names property Fixes: 08af4769 ("drm/msm: handle for EPROBE_DEFER for of_icc_get") Fixes: 00bb9243 ("drm/msm/gpu: add support for ocmem interconnect path") Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
drm/i915 features for v5.9, batch #2 Highlights: - Very early DG1 enabling (Abdiel, Lucas, Anusha) Gem/GT: - Fix spinlock recursion on signaling a signaled request (Chris) - Perf: Use GTT when saving/restoring engine GPR (Umesh Nerlige Ramappa) - SSEU refactoring, debugfs move under gt/ (Daniele, Venkata Sandeep Dhanalakota) - Various GT refactoring and cleanup, preparation for future changes (Daniele) - Adjust HuC state accordingly after GuC fetch error (Michał Winiarski) - UC debugfs updates (Michał Winiarski) - Only revoke the GGTT mmappings on aperture detiling changes (Chris) - Only revoke mmap handlers if active (Chris) - Split the context's obj:vma lut into its own mutex (Chris) - Various memory, mmap and performance optimisations (Chris) - Improve system stability in case of false CS events (Chris) - Various refactorings and cleanup (Chris) - Always reset the engine on execlist failures (Chris) - Trace placement of timeline HWSP (Chris) - Update dma-attributes for our sg DMA (Chris) Display: - TGL CDCLK workaround tweaks to unbreak 8K display support (Stanislav) - A number of FBC fixes, along with i865 FBC enabling (Ville) - Validate MST modes against PBN limits (Lyude, Shawn Lee) - Do not access non-existing swizzle registers (Lucas) - Revert GEN11+ HBR3 rate fix that caused issues on TGL (Matt Atwood) - Update TGL+ combo phy initialization to match spec update (José) - Fix HDCP Content Protection property state machine (Anshuman) - Fix HDCP revoked keys handling (Ram) - Improve DDI BUF status checks and waits (Manasi) - Various SDVO+HDMI+DVI fixes around colorimetry, clocking, pixel repeat etc. (Ville) - DP voltage swing function refactoring (José) - WARN if max vswing/pre-emphasis violates the DP spec (Ville) Other: - Add new EHL PCI IDs (José) - Unify struct intel_digital_port variable naming (Lucas) - Various taint updates to aid debugging and improve CI (Michał Winiarski) - Straggler conversions to new mmio register accessors (Daniele) Signed-off-by:
-
