- 21 Feb, 2024 3 commits
-
-
Biju Das authored
Document DU found in RZ/V2L SoC. The DU block is identical to RZ/G2L SoC and therefore use RZ/G2L fallback to avoid any driver changes. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240218164840.57662-3-biju.das.jz@bp.renesas.comSigned-off-by:
Maxime Ripard <mripard@kernel.org>
-
Biju Das authored
The RZ/G2L LCD controller is composed of Frame Compression Processor (FCPVD), Video Signal Processor (VSPD), and Display Unit (DU). The DU module supports the following hardware features − Display Parallel Interface (DPI) and MIPI LINK Video Interface − Display timing master − Generates video timings − Selecting the polarity of output DCLK, HSYNC, VSYNC, and DE − Supports Progressive − Input data format (from VSPD): RGB888, RGB666 − Output data format: same as Input data format − Supporting Full HD (1920 pixels x 1080 lines) for MIPI-DSI Output − Supporting WXGA (1280 pixels x 800 lines) for Parallel Output This patch documents the DU module found on RZ/G2L LCDC. Signed-off-by:
-
Mads Bligaard Nielsen authored
Moved IRQ registration down to end of adv7511_probe(). If an IRQ already is pending during adv7511_probe (before adv7511_cec_init) then cec_received_msg_ts could crash using uninitialized data: Unable to handle kernel read from unreadable memory at virtual address 00000000000003d5 Internal error: Oops: 96000004 [#1] PREEMPT_RT SMP Call trace: cec_received_msg_ts+0x48/0x990 [cec] adv7511_cec_irq_process+0x1cc/0x308 [adv7511] adv7511_irq_process+0xd8/0x120 [adv7511] adv7511_irq_handler+0x1c/0x30 [adv7511] irq_thread_fn+0x30/0xa0 irq_thread+0x14c/0x238 kthread+0x190/0x1a8 Fixes: 3b1b9750 ("drm: adv7511/33: add HDMI CEC support") Signed-off-by:Mads Bligaard Nielsen <bli@bang-olufsen.dk> Signed-off-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
- 19 Feb, 2024 17 commits
-
-
Dmitry Baryshkov authored
The test kms_universal_plane@universal-plane-sanity fails on both SC7180 platforms. The drm/msm returns -ERANGE as it can not handle passet scaling range, however the test is not ready to handle that. Mark the test as failing until it is fixed. ERROR - Igt error: (kms_universal_plane:1554) CRITICAL: Test assertion failure function sanity_test_pipe, file ../tests/kms_universal_plane.c:438: ERROR - Igt error: (kms_universal_plane:1554) CRITICAL: Failed assertion: drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id, output->config.crtc->crtc_id, test.oversized_fb.fb_id, 0, 0, 0, mode->hdisplay + 100, mode->vdisplay + 100, IGT_FIXED(0,0), IGT_FIXED(0,0), IGT_FIXED(mode->hdisplay,0), IGT_FIXED(mode->vdisplay,0)) == expect ERROR - Igt error: (kms_universal_plane:1554) CRITICAL: Last errno: 34, Numerical result out of range Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Dmitry Baryshkov authored
Mark two tests as passing on the APQ8096 / db820c platform. Signed-off-by:
-
Dmitry Baryshkov authored
Since the addition of testlist.txt the IGT has changed some of test names. Some test names were changed to use '-' instead of '_'. In other cases tests were just renamed. Follow those changes. Signed-off-by:
Rob Clark <robdclark@chromium.org> Acked-by:
-
Dmitry Baryshkov authored
The commit ea489a3d ("drm/ci: add sc7180-trogdor-kingoftown") dropped the msm-sc7180-skips.txt file, which disabled suspend-to-RAM tests. However testing shows that STR tests still can fail. Restore the skiplist, applying it to both limozeen and kingoftown machines. Fixes: ea489a3d ("drm/ci: add sc7180-trogdor-kingoftown") Signed-off-by:
Vignesh Raman <vignesh.raman@collabora.com> Signed-off-by:
-
Tony Lindgren authored
The BOE BP082WX1-100 is a 8.2" panel similar to the 10.1" panel BP101WX1-100. Both panels use the same timings. Acked-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240211111703.7567-2-tony@atomide.comSigned-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240211111703.7567-2-tony@atomide.com
-
Tony Lindgren authored
This panel is found on Motorola mapphone tablets mz607 to mz609. Acked-by:
-
Devarsh Thakkar authored
TI keystone display subsystem present in AM65, AM62 and AM62A SoC support two separate register spaces namely "common" and "common1" which can be used by two separate hosts to program the display controller as described in respective Technical Reference Manuals [1]. The common1 register space has similar set of configuration registers as supported in common register space except the global configuration registers which are exclusive to common region. This adds binding for "common1" register region too as supported by the hardware. [1]: AM62x TRM: https://www.ti.com/lit/pdf/spruiv7 (Section 14.8.9.1 DSS Registers) AM65x TRM: https://www.ti.com/lit/pdf/spruid7 (Section 12.6.5 DSS Registers) AM62A TRM: https://www.ti.com/lit/pdf/spruj16 (Section 14.9.9 Display Subsystem Registers) Fixes: 2d8730f1 ("dt-bindings: display: ti,am65x-dss: Add dt-schema yaml binding") Signed-off-by:
Devarsh Thakkar <devarsht@ti.com> Reviewed-by:
Aradhya Bhatia <a-bhatia1@ti.com> Acked-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240216062426.4170528-2-devarsht@ti.com
-
Jacek Lawrynowicz authored
VPU was renamed to NPU but due to large overhead of renaming all the sources only user visible messages are being updated. Signed-off-by:
Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-9-jacek.lawrynowicz@linux.intel.com
-
Wachowski, Karol authored
Rename BO allocate/create functions, so the code is more consistent. There are now two matching buffer creation functions: - ivpu_bo_create_ioctl() - create a BO from user space - ivpu_bo_create() - create a BO from kernel space ivpu_bo_alloc() is now only used to allocate struct ivpu_bo which better matches its name. Signed-off-by:
Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by:
-
Jacek Lawrynowicz authored
ivpu_reset_engine_fn and ivpu_reset_engine_fops were separated during merge so move them back together to keep the file consistent. Signed-off-by:
-
Wachowski, Karol authored
Reserve/allocate and free doorbells for command queues when needed using xarray. This allows to avoid reserving a doorbell for a contexts that never issues a job. Signed-off-by:
-
Krystian Pradzynski authored
Add support for FW boot API param system_time_us. According to the API description this field should be set to system time in microseconds starting from 1970. Signed-off-by:
Krystian Pradzynski <krystian.pradzynski@intel.com> Signed-off-by:
-
Jacek Lawrynowicz authored
Update Boot API to 3.22.0 and JSM API to 3.15.6 Signed-off-by:
-
Jacek Lawrynowicz authored
We are now using NPU IP generation based FW names instead of platform code names, so mtl_vpu.bin can be removed. Signed-off-by:
-
Jacek Lawrynowicz authored
Remove legacy postfix from TILE_SKU_BOTH macro. This was missed when renaming MTL to VPU37XX. Signed-off-by:
-
Douglas Anderson authored
The panel on sc7180-trogdor-wormdingler and sc7180-trogdor-quackingstick hasn't been coming up since commit 9e15123e ("drm/msm/dsi: Stop unconditionally powering up DSI hosts at modeset"). Let's add "prepare_prev_first" as has been done for many other DSI panels. Fixes: 9e15123e ("drm/msm/dsi: Stop unconditionally powering up DSI hosts at modeset") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240216123111.1.I71c103720909790e1ec5a3f5bd96b18ab7b596fa@changeidSigned-off-by:
-
Martin Blumenstingl authored
Rename meson_encoder_{cvbs,dsi,hdmi}_init() to meson_encoder_{cvbs,dsi,hdmi}_probe() so it's clear that these functions are used at probe time during driver initialization. Also switch all error prints inside those functions to use dev_err_probe() for consistency. This makes the code more straight forward to read and makes the error prints within those functions consistent (by logging all -EPROBE_DEFER with dev_dbg(), while actual errors are logged with dev_err() and get the error value printed). Signed-off-by:Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
-
- 16 Feb, 2024 16 commits
-
-
Heiko Stuebner authored
The ltk101b4029w ist a 10.1 inch DSI panel and shares the same supplies and startup timings with the existing ltk500hd1829. So simply add it as a variant with its own init sequence and display-mode. Signed-off-by:
Heiko Stuebner <heiko.stuebner@cherry.de> Acked-by:
-
Heiko Stuebner authored
Add the compatible for the ltk101b4029w panel, that has the same manufacturer, general bringup and supplies but a different dsi-init- sequence compared to the ltk500hd1829 . Signed-off-by:
-
Heiko Stuebner authored
There exist more dsi-panels from Leadtek sharing supplies and timings with only the panel-mode and init commands differing. So make room in the driver to also keep variants here instead of requiring additional drivers per panel. Signed-off-by:
-
Heiko Stuebner authored
The 9904379 is a 10.1" 1024x600 LVDS display using the standard lvds properties. Signed-off-by:
-
Heiko Stuebner authored
admatec GmbH is a german supplier for industrial displays. Link: https://www.admatec.de/Signed-off-by:
-
Jiri Slaby (SUSE) authored
agp_bridge_data::type is unused (and I cannot find when was used last). Therefore, remove it. Found by https://github.com/jirislaby/clang-struct. Signed-off-by:
Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: David Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240213111511.25187-1-jirislaby@kernel.org
-
Alexander Stein authored
The bridge type was set to default (Unknown). Set proper bridge type. With this fixed, debugfs output imx8mp looks proper. $ cat /sys/kernel/debug/dri/1/encoder-0/bridges bridge[0]: imx_hdmi_pvi_bridge_funcs [imx8mp_hdmi_pvi] type: [0] Unknown OF: /soc@0/bus@32c00000/display-bridge@32fc4000:fsl,imx8mp-hdmi-pvi ops: [0x0] bridge[1]: dw_hdmi_bridge_funcs [dw_hdmi] type: [11] HDMI-A OF: /soc@0/bus@32c00000/hdmi@32fd8000:fsl,imx8mp-hdmi ops: [0x7] detect edid hpd Signed-off-by:Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
-
Alex Deucher authored
Switch to using the new gem shared memory stats helper rather than hand rolling it. Link: https://lore.kernel.org/all/20231207180225.439482-1-alexander.deucher@amd.com/Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
Switch to using the new gem shared memory stats helper rather than hand rolling it. Link: https://lore.kernel.org/all/20231207180225.439482-1-alexander.deucher@amd.com/Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Alex Deucher authored
Add shared stats. Useful for seeing shared memory. v2: take dma-buf into account as well v3: use the new gem helper Link: https://lore.kernel.org/all/20231207180225.439482-1-alexander.deucher@amd.com/Signed-off-by:
Christian König <christian.keonig@amd.com> Signed-off-by:
-
Alex Deucher authored
Show buffers as shared if they are shared via dma-buf as well (e.g., shared with v4l or some other subsystem). v2: switch to gem helper Link: https://lore.kernel.org/all/20231207180225.439482-1-alexander.deucher@amd.com/ Reviewed-by: Rob Clark <robdclark@gmail.com> (v1) Reviewed-by:
-
Alex Deucher authored
Add a helper so that drm drivers can consistently report shared status via the fdinfo shared memory stats interface. In addition to handle count, show buffers as shared if they are shared via dma-buf as well (e.g., shared with v4l or some other subsystem). v2: switch to inline function Link: https://lore.kernel.org/all/20231207180225.439482-1-alexander.deucher@amd.com/ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v1) Signed-off-by:
-
Alex Deucher authored
Clarify the documentation in preparation for updated helpers which check the handle count as well as whether a dma-buf has been attached. Link: https://lore.kernel.org/all/20231207180225.439482-1-alexander.deucher@amd.com/Reviewed-by:
-
Luca Weiss authored
Add support for the 2340x1080 LCD panel (DJN 9A-3R063-1102B) bundled with a HX83112A driver IC, as found on the Fairphone 4 smartphone. Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Reviewed-by:
-
Luca Weiss authored
Himax HX83112A is a display driver IC used to drive LCD DSI panels. Describe it and the DJN 9A-3R063-1102B using it. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Colin Ian King authored
The variable space is being initialized with a value that is never read, it is being re-assigned later on. The initialization is redundant and can be removed. Also merge two declaration lines together. Cleans up clang scan build warning: drivers/gpu/host1x/cdma.c:628:15: warning: Value stored to 'space' during its initialization is never read [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240215224301.2073845-1-colin.i.king@gmail.com
-
- 15 Feb, 2024 2 commits
-
-
Hsin-Yi Wang authored
This reverts commit 70e0d555. The overridden mode fixes the panel glitching issue on mt8186 chromebook. However, it causes the internal display not working on mt8173 chromebook. Revert the overridden mode for now to let mt8173 have a functional display. Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
-
Geert Uytterhoeven authored
Fix misspellings of "hardware". Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
- 14 Feb, 2024 2 commits
-
-
Dmitry Baryshkov authored
If the ADV7511 bridge driver is compiled as a module, while DRM_MSM is built-in, the clk_disable_unused congests with the runtime PM handling of the DSI PHY for the clk_prepare_lock(). This causes apq8016 runner to fail without completing any jobs ([1]). Drop the BM_CMDLINE which duplicate the command line from the .baremetal-igt-arm64 clause and enforce the clk_ignore_unused kernelarg instead to make apq8016 runner work. [1] https://gitlab.freedesktop.org/drm/msm/-/jobs/54990475 Fixes: 0119c894 ("drm: Add initial ci/ subdirectory") Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
-
Randy Dunlap authored
Correct a spello/typo in comments. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
