- 01 Nov, 2017 24 commits
-
-
Franck Demathieu authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit b28ace12 ] The max and entry variables are unsigned according to the dt-bindings. Fix following 3 sparse issues (-Wtypesign): drivers/irqchip/irq-crossbar.c:222:52: warning: incorrect type in argument 3 (different signedness) drivers/irqchip/irq-crossbar.c:222:52: expected unsigned int [usertype] *out_value drivers/irqchip/irq-crossbar.c:222:52: got int *<noident> drivers/irqchip/irq-crossbar.c:245:56: warning: incorrect type in argument 4 (different signedness) drivers/irqchip/irq-crossbar.c:245:56: expected unsigned int [usertype] *out_value drivers/irqchip/irq-crossbar.c:245:56: got int *<noident> drivers/irqchip/irq-crossbar.c:263:56: warning: incorrect type in argument 4 (different signedness) drivers/irqchip/irq-crossbar.c:263:56: expected unsigned int [usertype] *out_value drivers/irqchip/irq-crossbar.c:263:56: got int *<noident> Signed-off-by:
Franck Demathieu <fdemathieu@gmail.com> Cc: marc.zyngier@arm.com Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/20170223094855.6546-1-fdemathieu@gmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit 3736d4eb ] gcc-4.3 can't decide whether the constant value in kempld_prescaler[PRESCALER_21] is built-time constant or not, and gets confused by the logic in do_div(): drivers/watchdog/kempld_wdt.o: In function `kempld_wdt_set_stage_timeout': kempld_wdt.c:(.text.kempld_wdt_set_stage_timeout+0x130): undefined reference to `__aeabi_uldivmod' This adds a call to ACCESS_ONCE() to force it to not consider it to be constant, and leaves the more efficient normal case in place for modern compilers, using an #ifdef to annotate why we do this hack. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Peter Zijlstra authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit 7fb4a2ce ] Boqun reported that hlock->references can overflow. Add a debug test for that to generate a clear error when this happens. Without this, lockdep is likely to report a mysterious failure on unlock. Reported-by:
Boqun Feng <boqun.feng@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicolai Hähnle <Nicolai.Haehnle@amd.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1729105 This reverts commit 668cee82 which was commit f507b54d upstream. Ben reports: That function doesn't exist here (it was introduced in 4.13). Instead, this backport has modified bsg_create_job(), creating a leak. Please revert this on the 3.18, 4.4 and 4.9 stable branches. So I'm dropping it from here. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
-
Parthasarathy Bhuvaragan authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit aad06212 ] In commit e3a77561 ("tipc: split up function tipc_msg_eval()"), we have updated the function tipc_msg_lookup_dest() to set the error codes to negative values at destination lookup failures. Thus when the function sets the error code to -TIPC_ERR_NO_NAME, its inserted into the 4 bit error field of the message header as 0xf instead of TIPC_ERR_NO_NAME (1). The value 0xf is an unknown error code. In this commit, we set only positive error code. Fixes: e3a77561 ("tipc: split up function tipc_msg_eval()") Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Christoph Paasch authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit 9d538fa6 ] sk->sk_prot and sk->sk_prot_creator can differ when the app uses IPV6_ADDRFORM (transforming an IPv6-socket to an IPv4-one). Which is why sk_prot_creator is there to make sure that sk_prot_free() does the kmem_cache_free() on the right kmem_cache slab. Now, if such a socket gets transformed back to a listening socket (using connect() with AF_UNSPEC) we will allocate an IPv4 tcp_sock through sk_clone_lock() when a new connection comes in. But sk_prot_creator will still point to the IPv6 kmem_cache (as everything got copied in sk_clone_lock()). When freeing, we will thus put this memory back into the IPv6 kmem_cache although it was allocated in the IPv4 cache. I have seen memory corruption happening because of this. With slub-debugging and MEMCG_KMEM enabled this gives the warning "cache_from_obj: Wrong slab cache. TCPv6 but object is from TCP" A C-program to trigger this: void main(void) { int fd = socket(AF_INET6, SOCK_STREAM, IPPROTO_TCP); int new_fd, newest_fd, client_fd; struct sockaddr_in6 bind_addr; struct sockaddr_in bind_addr4, client_addr1, client_addr2; struct sockaddr unsp; int val; memset(&bind_addr, 0, sizeof(bind_addr)); bind_addr.sin6_family = AF_INET6; bind_addr.sin6_port = ntohs(42424); memset(&client_addr1, 0, sizeof(client_addr1)); client_addr1.sin_family = AF_INET; client_addr1.sin_port = ntohs(42424); client_addr1.sin_addr.s_addr = inet_addr("127.0.0.1"); memset(&client_addr2, 0, sizeof(client_addr2)); client_addr2.sin_family = AF_INET; client_addr2.sin_port = ntohs(42421); client_addr2.sin_addr.s_addr = inet_addr("127.0.0.1"); memset(&unsp, 0, sizeof(unsp)); unsp.sa_family = AF_UNSPEC; bind(fd, (struct sockaddr *)&bind_addr, sizeof(bind_addr)); listen(fd, 5); client_fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); connect(client_fd, (struct sockaddr *)&client_addr1, sizeof(client_addr1)); new_fd = accept(fd, NULL, NULL); close(fd); val = AF_INET; setsockopt(new_fd, SOL_IPV6, IPV6_ADDRFORM, &val, sizeof(val)); connect(new_fd, &unsp, sizeof(unsp)); memset(&bind_addr4, 0, sizeof(bind_addr4)); bind_addr4.sin_family = AF_INET; bind_addr4.sin_port = ntohs(42421); bind(new_fd, (struct sockaddr *)&bind_addr4, sizeof(bind_addr4)); listen(new_fd, 5); client_fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); connect(client_fd, (struct sockaddr *)&client_addr2, sizeof(client_addr2)); newest_fd = accept(new_fd, NULL, NULL); close(new_fd); close(client_fd); close(new_fd); } As far as I can see, this bug has been there since the beginning of the git-days. Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Willem de Bruijn authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit da7c9561 ] Packet socket option po->has_vnet_hdr can be updated concurrently with other operations if no ring is attached. Do not test the option twice in packet_snd, as the value may change in between calls. A race on setsockopt disable may cause a packet > mtu to be sent without having GSO options set. Fixes: bfd5f4a3 ("packet: Add GSO/csum offload support.") Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
-
Willem de Bruijn authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit 4971613c ] Once a socket has po->fanout set, it remains a member of the group until it is destroyed. The prot_hook must be constant and identical across sockets in the group. If fanout_add races with packet_do_bind between the test of po->fanout and taking the lock, the bind call may make type or dev inconsistent with that of the fanout group. Hold po->bind_lock when testing po->fanout to avoid this race. I had to introduce artificial delay (local_bh_enable) to actually observe the race. Fixes: dc99f600 ("packet: Add fanout support.") Signed-off-by:
-
Alexander Potapenko authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit 2580c4c1 ] KMSAN (https://github.com/google/kmsan) reported accessing uninitialized skb->data[0] in the case the skb is empty (i.e. skb->len is 0): ================================================ BUG: KMSAN: use of uninitialized memory in tun_get_user+0x19ba/0x3770 CPU: 0 PID: 3051 Comm: probe Not tainted 4.13.0+ #3140 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: ... __msan_warning_32+0x66/0xb0 mm/kmsan/kmsan_instr.c:477 tun_get_user+0x19ba/0x3770 drivers/net/tun.c:1301 tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365 call_write_iter ./include/linux/fs.h:1743 new_sync_write fs/read_write.c:457 __vfs_write+0x6c3/0x7f0 fs/read_write.c:470 vfs_write+0x3e4/0x770 fs/read_write.c:518 SYSC_write+0x12f/0x2b0 fs/read_write.c:565 SyS_write+0x55/0x80 fs/read_write.c:557 do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284 entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:245 ... origin: ... kmsan_poison_shadow+0x6e/0xc0 mm/kmsan/kmsan.c:211 slab_alloc_node mm/slub.c:2732 __kmalloc_node_track_caller+0x351/0x370 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 __alloc_skb+0x26a/0x810 net/core/skbuff.c:231 alloc_skb ./include/linux/skbuff.h:903 alloc_skb_with_frags+0x1d7/0xc80 net/core/skbuff.c:4756 sock_alloc_send_pskb+0xabf/0xfe0 net/core/sock.c:2037 tun_alloc_skb drivers/net/tun.c:1144 tun_get_user+0x9a8/0x3770 drivers/net/tun.c:1274 tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365 call_write_iter ./include/linux/fs.h:1743 new_sync_write fs/read_write.c:457 __vfs_write+0x6c3/0x7f0 fs/read_write.c:470 vfs_write+0x3e4/0x770 fs/read_write.c:518 SYSC_write+0x12f/0x2b0 fs/read_write.c:565 SyS_write+0x55/0x80 fs/read_write.c:557 do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284 return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:245 ================================================ Make sure tun_get_user() doesn't touch skb->data[0] unless there is actual data. C reproducer below: ========================== // autogenerated by syzkaller (http://github.com/google/syzkaller) #define _GNU_SOURCE #include <fcntl.h> #include <linux/if_tun.h> #include <netinet/ip.h> #include <net/if.h> #include <string.h> #include <sys/ioctl.h> int main() { int sock = socket(PF_INET, SOCK_STREAM, IPPROTO_IP); int tun_fd = open("/dev/net/tun", O_RDWR); struct ifreq req; memset(&req, 0, sizeof(struct ifreq)); strcpy((char*)&req.ifr_name, "gre0"); req.ifr_flags = IFF_UP | IFF_MULTICAST; ioctl(tun_fd, TUNSETIFF, &req); ioctl(sock, SIOCSIFFLAGS, "gre0"); write(tun_fd, "hi", 0); return 0; } ========================== Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
Sabrina Dubroca authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit 62b982ee ] If we try to delete the same tunnel twice, the first delete operation does a lookup (l2tp_tunnel_get), finds the tunnel, calls l2tp_tunnel_delete, which queues it for deletion by l2tp_tunnel_del_work. The second delete operation also finds the tunnel and calls l2tp_tunnel_delete. If the workqueue has already fired and started running l2tp_tunnel_del_work, then l2tp_tunnel_delete will queue the same tunnel a second time, and try to free the socket again. Add a dead flag to prevent firing the workqueue twice. Then we can remove the check of queue_work's result that was meant to prevent that race but doesn't. Reproducer: ip l2tp add tunnel tunnel_id 3000 peer_tunnel_id 4000 local 192.168.0.2 remote 192.168.0.1 encap udp udp_sport 5000 udp_dport 6000 ip l2tp add session name l2tp1 tunnel_id 3000 session_id 1000 peer_session_id 2000 ip link set l2tp1 up ip l2tp del tunnel tunnel_id 3000 ip l2tp del tunnel tunnel_id 3000 Fixes: f8ccac0e ("l2tp: put tunnel socket release on a workqueue") Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Ridge Kennedy authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit 12d656af ] While destroying a network namespace that contains a L2TP tunnel a "BUG: scheduling while atomic" can be observed. Enabling lockdep shows that this is happening because l2tp_exit_net() is calling l2tp_tunnel_closeall() (via l2tp_tunnel_delete()) from within an RCU critical section. l2tp_exit_net() takes rcu_read_lock_bh() << list_for_each_entry_rcu() >> l2tp_tunnel_delete() l2tp_tunnel_closeall() __l2tp_session_unhash() synchronize_rcu() << Illegal inside RCU critical section >> BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 0, pid: 86, name: kworker/u16:2 INFO: lockdep is turned off. CPU: 2 PID: 86 Comm: kworker/u16:2 Tainted: G W O 4.4.6-at1 #2 Hardware name: Xen HVM domU, BIOS 4.6.1-xs125300 05/09/2016 Workqueue: netns cleanup_net 0000000000000000 ffff880202417b90 ffffffff812b0013 ffff880202410ac0 ffffffff81870de8 ffff880202417bb8 ffffffff8107aee8 ffffffff81870de8 0000000000000c51 0000000000000000 ffff880202417be0 ffffffff8107b024 Call Trace: [<ffffffff812b0013>] dump_stack+0x85/0xc2 [<ffffffff8107aee8>] ___might_sleep+0x148/0x240 [<ffffffff8107b024>] __might_sleep+0x44/0x80 [<ffffffff810b21bd>] synchronize_sched+0x2d/0xe0 [<ffffffff8109be6d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8105c7bb>] ? __local_bh_enable_ip+0x6b/0xc0 [<ffffffff816a1b00>] ? _raw_spin_unlock_bh+0x30/0x40 [<ffffffff81667482>] __l2tp_session_unhash+0x172/0x220 [<ffffffff81667397>] ? __l2tp_session_unhash+0x87/0x220 [<ffffffff8166888b>] l2tp_tunnel_closeall+0x9b/0x140 [<ffffffff81668c74>] l2tp_tunnel_delete+0x14/0x60 [<ffffffff81668dd0>] l2tp_exit_net+0x110/0x270 [<ffffffff81668d5c>] ? l2tp_exit_net+0x9c/0x270 [<ffffffff815001c3>] ops_exit_list.isra.6+0x33/0x60 [<ffffffff81501166>] cleanup_net+0x1b6/0x280 ... This bug can easily be reproduced with a few steps: $ sudo unshare -n bash # Create a shell in a new namespace # ip link set lo up # ip addr add 127.0.0.1 dev lo # ip l2tp add tunnel remote 127.0.0.1 local 127.0.0.1 tunnel_id 1 \ peer_tunnel_id 1 udp_sport 50000 udp_dport 50000 # ip l2tp add session name foo tunnel_id 1 session_id 1 \ peer_session_id 1 # ip link set foo up # exit # Exit the shell, in turn exiting the namespace $ dmesg ... [942121.089216] BUG: scheduling while atomic: kworker/u16:3/13872/0x00000200 ... To fix this, move the call to l2tp_tunnel_closeall() out of the RCU critical section, and instead call it from l2tp_tunnel_del_work(), which is running from the l2tp_wq workqueue. Fixes: 2b551c6e ("l2tp: close sessions before initiating tunnel delete") Signed-off-by:
Ridge Kennedy <ridge.kennedy@alliedtelesis.co.nz> Acked-by:
-
Alexey Kodanev authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit 36f6ee22 ] When running LTP IPsec tests, KASan might report: BUG: KASAN: use-after-free in vti_tunnel_xmit+0xeee/0xff0 [ip_vti] Read of size 4 at addr ffff880dc6ad1980 by task swapper/0/0 ... Call Trace: <IRQ> dump_stack+0x63/0x89 print_address_description+0x7c/0x290 kasan_report+0x28d/0x370 ? vti_tunnel_xmit+0xeee/0xff0 [ip_vti] __asan_report_load4_noabort+0x19/0x20 vti_tunnel_xmit+0xeee/0xff0 [ip_vti] ? vti_init_net+0x190/0x190 [ip_vti] ? save_stack_trace+0x1b/0x20 ? save_stack+0x46/0xd0 dev_hard_start_xmit+0x147/0x510 ? icmp_echo.part.24+0x1f0/0x210 __dev_queue_xmit+0x1394/0x1c60 ... Freed by task 0: save_stack_trace+0x1b/0x20 save_stack+0x46/0xd0 kasan_slab_free+0x70/0xc0 kmem_cache_free+0x81/0x1e0 kfree_skbmem+0xb1/0xe0 kfree_skb+0x75/0x170 kfree_skb_list+0x3e/0x60 __dev_queue_xmit+0x1298/0x1c60 dev_queue_xmit+0x10/0x20 neigh_resolve_output+0x3a8/0x740 ip_finish_output2+0x5c0/0xe70 ip_finish_output+0x4ba/0x680 ip_output+0x1c1/0x3a0 xfrm_output_resume+0xc65/0x13d0 xfrm_output+0x1e4/0x380 xfrm4_output_finish+0x5c/0x70 Can be fixed if we get skb->len before dst_output(). Fixes: b9959fd3 ("vti: switch to new ip tunnel code") Fixes: 22e1b23d ("vti6: Support inter address family tunneling.") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
-
Meng Xu authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit 02388bf8 ] In isdn_ppp_write(), the header (i.e., protobuf) of the buffer is fetched twice from userspace. The first fetch is used to peek at the protocol of the message and reset the huptimer if necessary; while the second fetch copies in the whole buffer. However, given that buf resides in userspace memory, a user process can race to change its memory content across fetches. By doing so, we can either avoid resetting the huptimer for any type of packets (by first setting proto to PPP_LCP and later change to the actual type) or force resetting the huptimer for LCP packets. This patch changes this double-fetch behavior into two single fetches decided by condition (lp->isdn_device < 0 || lp->isdn_channel <0). A more detailed discussion can be found at https://marc.info/?l=linux-kernel&m=150586376926123&w=2Signed-off-by:
Meng Xu <mengxu.gatech@gmail.com> Signed-off-by:
-
Yonghong Song authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit ec9dd352 ] This patch fixes a bug exhibited by the following scenario: 1. fd1 = perf_event_open with attr.config = ID1 2. attach bpf program prog1 to fd1 3. fd2 = perf_event_open with attr.config = ID1 <this will be successful> 4. user program closes fd2 and prog1 is detached from the tracepoint. 5. user program with fd1 does not work properly as tracepoint no output any more. The issue happens at step 4. Multiple perf_event_open can be called successfully, but only one bpf prog pointer in the tp_event. In the current logic, any fd release for the same tp_event will free the tp_event->prog. The fix is to free tp_event->prog only when the closing fd corresponds to the one which registered the program. Signed-off-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
-
Willem de Bruijn authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit 008ba2a1 ] Packet socket bind operations must hold the po->bind_lock. This keeps po->running consistent with whether the socket is actually on a ptype list to receive packets. fanout_add unbinds a socket and its packet_rcv/tpacket_rcv call, then binds the fanout object to receive through packet_rcv_fanout. Make it hold the po->bind_lock when testing po->running and rebinding. Else, it can race with other rebind operations, such as that in packet_set_ring from packet_rcv to tpacket_rcv. Concurrent updates can result in a socket being added to a fanout group twice, causing use-after-free KASAN bug reports, among others. Reported independently by both trinity and syzkaller. Verified that the syzkaller reproducer passes after this patch. Fixes: dc99f600 ("packet: Add fanout support.") Reported-by:
nixioaming <nixiaoming@huawei.com> Signed-off-by:
-
Christian Lamparter authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit f5595606 ] This patch is pretty much a carbon copy of commit 3079c652 ("caif: Fix napi poll list corruption") with "caif" replaced by "emac". The commit d75b1ade ("net: less interrupt masking in NAPI") breaks emac. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers emac tries to do a last-ditch check and if there is more work it will call napi_reschedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in emac. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Xin Long authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit 76cc0d32 ] Now in ip6gre_header before packing the ipv6 header, it skb_push t->hlen which only includes encap_hlen + tun_hlen. It means greh and inner header would be over written by ipv6 stuff and ipv6h might have no chance to set up. Jianlin found this issue when using remote any on ip6_gre, the packets he captured on gre dev are truncated: 22:50:26.210866 Out ethertype IPv6 (0x86dd), length 120: truncated-ip6 -\ 8128 bytes missing!(flowlabel 0x92f40, hlim 0, next-header Options (0) \ payload length: 8192) ::1:2000:0 > ::1:0:86dd: HBH [trunc] ip-proto-128 \ 8184 It should also skb_push ipv6hdr so that ipv6h points to the right position to set ipv6 stuff up. This patch is to skb_push hlen + sizeof(*ipv6h) and also fix some indents in ip6gre_header. Fixes: c12b395a ("gre: Support GRE over IPv6") Reported-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit 63ecc3d9 ] While trying an ESP transport mode encryption for UDPv6 packets of datagram size 1436 with MTU 1500, checksum error was observed in the secondary fragment. This error occurs due to the UDP payload checksum being missed out when computing the full checksum for these packets in udp6_hwcsum_outgoing(). Fixes: d39d938c ("ipv6: Introduce udpv6_send_skb()") Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Edward Cree authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit e67b8a68 ] Neither ___bpf_prog_run nor the JITs accept it. Also adds a new test case. Fixes: 17a52670 ("bpf: verifier (add verifier core)") Signed-off-by:
Edward Cree <ecree@solarflare.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Dan Carpenter authored
BugLink: http://bugs.launchpad.net/bugs/1729105 [ Upstream commit fa5f7b51 ] This code causes a static checker warning because Smatch doesn't trust anything that comes from skb->data. I've reviewed this code and I do think skb->data can be controlled by the user here. The sctp_event_subscribe struct has 13 __u8 fields and we want to see if ours is non-zero. sn_type can be any value in the 0-USHRT_MAX range. We're subtracting SCTP_SN_TYPE_BASE which is 1 << 15 so we could read either before the start of the struct or after the end. This is a very old bug and it's surprising that it would go undetected for so long but my theory is that it just doesn't have a big impact so it would be hard to notice. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Matt Redfearn authored
BugLink: http://bugs.launchpad.net/bugs/1729105 commit 5fdc66e0 upstream. Commit db8466c5 ("MIPS: IRQ Stack: Unwind IRQ stack onto task stack") erroneously set the initial stack pointer of the IRQ stack to a value with a 4 byte alignment. The MIPS32 ABI requires that the minimum stack alignment is 8 byte, and the MIPS64 ABIs(n32/n64) require 16 byte minimum alignment. Fix IRQ_STACK_START such that it leaves space for the dummy stack frame (containing interrupted task kernel stack pointer) while also meeting minimum alignment requirements. Fixes: db8466c5 ("MIPS: IRQ Stack: Unwind IRQ stack onto task stack") Reported-by:
Darius Ivanauskas <dasilt@yahoo.com> Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16760/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Harry Wentland authored
BugLink: http://bugs.launchpad.net/bugs/1729105 commit 6cecdf7a upstream. This makes it possibly for drivers to find the associated mst_port by looking at the payload allocation table. Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449514552-10236-3-git-send-email-harry.wentland@amd.comSigned-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kai Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Mark Rutland authored
BugLink: http://bugs.launchpad.net/bugs/1729105 commit e88d62cd upstream. As raw_cpu_generic_read() is a plain read from a raw_cpu_ptr() address, it's possible (albeit unlikely) that the compiler will split the access across multiple instructions. In this_cpu_generic_read() we disable preemption but not interrupts before calling raw_cpu_generic_read(). Thus, an interrupt could be taken in the middle of the split load instructions. If a this_cpu_write() or RMW this_cpu_*() op is made to the same variable in the interrupt handling path, this_cpu_read() will return a torn value. For native word types, we can avoid tearing using READ_ONCE(), but this won't work in all cases (e.g. 64-bit types on most 32-bit platforms). This patch reworks this_cpu_generic_read() to use READ_ONCE() where possible, otherwise falling back to disabling interrupts. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pranith Kumar <bobby.prani@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Signed-off-by:
Tejun Heo <tj@kernel.org> [Mark: backport to v4.4.y] Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Ignore: yes Signed-off-by:Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
-
- 31 Oct, 2017 2 commits
-
-
Thadeu Lima de Souza Cascardo authored
Signed-off-by: -
Thadeu Lima de Souza Cascardo authored
BugLink: http://bugs.launchpad.net/bugs/1721538 Update config after "UBUNTU: SAUCE: remove hv_network_direct driver". Signed-off-by:
-
- 30 Oct, 2017 14 commits
-
-
Marcelo Henrique Cerri authored
BugLink: http://bugs.launchpad.net/bugs/1721538 hv_network_direct is an RDMA driver specific for Azure. Supporting it requires multiple versions of the driver that are selected via userspace. Currently that's only supported in the linux-azure kernel and keeping a single version in the xenial kernel might cause issues when it doesn't match the host OS version. Signed-off-by:
Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> [kleber: adjusted for new abi files path] Signed-off-by:
-
Kai-Heng Feng authored
Like other Plantronics devices, C310 and C520-M do not support sample rate reading. Add them to the sample rate quirk accordingly. BugLink: https://bugs.launchpad.net/bugs/1708499 BugLink: https://bugs.launchpad.net/bugs/1709282Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> (cherry picked from commit 0dcd020b) Signed-off-by:
-
Markus Pargmann authored
BugLink: http://bugs.launchpad.net/bugs/696435 The userspace needs to know when nbd devices are ready for use. Currently no events are created for the userspace which doesn't work for systemd. See the discussion here: https://github.com/systemd/systemd/pull/358 This patch uses a central point to setup the nbd-internal sizes. A ioctl to set a size does not lead to a visible size change. The size of the block device will be kept at 0 until nbd is connected. As soon as it connects, the size will be changed to the real value and a uevent is created. When disconnecting, the blockdevice is set to 0 size and another uevent is generated. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> (cherry picked from commit 37091fdd) Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by:
-
Marcelo Henrique Cerri authored
Ignore: yes Commit "UBUNTU: d/s/m/insert-ubuntu-changes: use full version numbers" wrongly change the behaviour of the "<stop at>" parameter. Change the script to not include the <stop at> version into the target changelog. Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Acked-by:
-
Colin Ian King authored
BugLink: https://launchpad.net/bugs/1718388 io.dev is used as an index into the _devices array and currently the user may pass any unsigned int value into io.dev which can create an out-of-bounds error. Fix this by sanity checking io.dev and returning -EINVAL for out-of-bounds values of io.dev Detected by CoverityScan CID#1456895 ("Untrusted array index read") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Juerg Haefliger <juerg.haefliger@canonical.com> Acked-by:
-
Colin Ian King authored
BugLink: https://launchpad.net/bugs/1718388 dev->name is a char array and hence can never be null and so the null checks on dev->name are redundant. Remove them. Detected by CoverityScan CID#1456897, CID#145690 ("Array compared against 0") Signed-off-by:
-
Colin Ian King authored
BugLink: https://launchpad.net/bugs/1718388 sinfo can potentially be null, so add a null check to avoid a null pointer deference on sinfo->info_id. Detected by CoverityScan CID#1456902 ("Dereference before null check") Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1722719 This reverts commit fcaa4a07. As noted by Masaki [1], 0x120A + trackpoint will not be used in mass production machines, so remove the ID accordingly. [1] http://www.spinics.net/lists/linux-input/msg53222.htmlSigned-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> (cherry picked from commit 66dcdafe) Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-By:
Shrirang Bagul <shrirang.bagul@canonical.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1724836Signed-off-by:
-
Mathias Krause authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 6b32c126 upstream. The alt_max_short() macro in asm/alternative.h does not work as intended, leading to nasty bugs. E.g. alt_max_short("1", "3") evaluates to 3, but alt_max_short("3", "1") evaluates to 1 -- not exactly the maximum of 1 and 3. In fact, I had to learn it the hard way by crashing my kernel in not so funny ways by attempting to make use of the ALTENATIVE_2 macro with alternatives where the first one was larger than the second one. According to [1] and commit dbe4058a ("x86/alternatives: Fix ALTERNATIVE_2 padding generation properly") the right handed side should read "-(-(a < b))" not "-(-(a - b))". Fix that, to make the macro work as intended. While at it, fix up the comments regarding the additional "-", too. It's not about gas' usage of s32 but brain dead logic of having a "true" value of -1 for the < operator ... *sigh* Btw., the one in asm/alternative-asm.h is correct. And, apparently, all current users of ALTERNATIVE_2() pass same sized alternatives, avoiding to hit the bug. [1] http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMaxReviewed-and-tested-by:
Borislav Petkov <bp@suse.de> Fixes: dbe4058a ("x86/alternatives: Fix ALTERNATIVE_2 padding generation properly") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
-
Johan Hovold authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 299d7572 upstream. Make sure to reset the USB-console port pointer when console setup fails in order to avoid having the struct usb_serial be prematurely freed by the console code when the device is later disconnected. Fixes: 73e487fd ("[PATCH] USB console: fix disconnection issues") Acked-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Shrirang Bagul authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit f5d9644c upstream. Dell Wireless 5819/5818 devices are re-branded Sierra Wireless MC74 series which will by default boot with vid 0x413c and pid's 0x81cf, 0x81d0, 0x81d1, 0x81d2. Signed-off-by:
-
Stefan Bader authored
This reverts commit 66a7f616 in favour of the upstream stable commit. BugLink: https://bugs.launchpad.net/bugs/1724836Signed-off-by:
-
Henryk Heisig authored
BugLink: http://bugs.launchpad.net/bugs/1724836 commit 837ddc47 upstream. This commit adds support for TP-Link LTE mPCIe module is used in in TP-Link MR200v1, MR6400v1 and v2 routers. Signed-off-by:
Henryk Heisig <hyniu@o2.pl> Signed-off-by:
-
