- 10 Jul, 2023 39 commits
-
-
Krzysztof Kozlowski authored
There is no 'msg-size' property in ramoops, so assume intention was for 'pmsg-size': sm6350-sony-xperia-lena-pdx213.dtb: ramoops@ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected) Signed-off-by:Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230618114442.140185-5-krzysztof.kozlowski@linaro.orgSigned-off-by:
Bjorn Andersson <andersson@kernel.org>
-
Krzysztof Kozlowski authored
There is no 'msg-size' property in ramoops, so assume intention was for 'pmsg-size': sm6125-xiaomi-laurel-sprout.dtb: ramoops@ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected) Signed-off-by: -
Krzysztof Kozlowski authored
There is no 'msg-size' property in ramoops, so assume intention was for 'pmsg-size': sm6125-sony-xperia-seine-pdx201.dtb: ramoops@ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected) Signed-off-by: -
Krzysztof Kozlowski authored
FSA4480 has only one port according to bindings: sm8450-hdk.dtb: typec-mux@42: 'port' is a required property Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230618114442.140185-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
FSA4480 has only one port according to bindings: sm8350-hdk.dtb: typec-mux@42: 'port' is a required property Signed-off-by:
-
Krzysztof Kozlowski authored
Use 'wakeup-source' instead of 'gpio-key,wakeup' to indicate key can wake-up the device: sm6115-fxtec-pro1x.dtb: gpio-keys: key-volume-up: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected) Signed-off-by: -
Krzysztof Kozlowski authored
Bindings except certain pattern for gpio-keys children: sc8180x-lenovo-flex-5g.dtb: gpio-keys: 'lid' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+' Signed-off-by:
-
Krzysztof Kozlowski authored
Panel takes only one port: sc8180x-primus.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
-
Krzysztof Kozlowski authored
Panel takes only one port: sc8180x-lenovo-flex-5g.dtb: panel: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
-
Krzysztof Kozlowski authored
Bindings expect thermal node names to end with 'thermal': sc8180x-lenovo-flex-5g.dtb: thermal-zones: 'gpu-thermal-bottom', 'gpu-thermal-top' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+' Signed-off-by: -
Krzysztof Kozlowski authored
ADC channel node names were changed to require generic 'channel'. The user-visible part is defined via label. sc8180x-lenovo-flex-5g.dtb: adc@3100: 'die-temp@6', 'ref-gnd@0', 'vref-1p25@1' do not match any of the regexes: '^channel@[0-9a-f]+$', 'pinctrl-[0-9]+' Signed-off-by:
-
Krzysztof Kozlowski authored
ADC channel node names were changed to require generic 'channel'. The user-visible part is defined via label. sc7180-acer-aspire1.dtb: adc@3100: 'charger-thermistor@4f', 'thermistor@4e' do not match any of the regexes: '^channel@[0-9a-f]+$', 'pinctrl-[0-9]+' Signed-off-by:
Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20230617171541.286957-8-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Use generic node names for I2C devices. Signed-off-by:
-
Krzysztof Kozlowski authored
I2C controller bindings do not allow label property: msm8996-xiaomi-gemini.dtb: i2c@75b6000: Unevaluated properties are not allowed ('label' was unexpected) Signed-off-by: -
Krzysztof Kozlowski authored
The children of qcom,smp2p do not need address/size-cells: msm8939-sony-xperia-kanuti-tulip.dtb: smp2p-hexagon: slave-kernel: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
-
Krzysztof Kozlowski authored
I2C controller bindings do not allow label property: apq8096-db820c.dtb: i2c@7577000: Unevaluated properties are not allowed ('label' was unexpected) Signed-off-by: -
Krzysztof Kozlowski authored
I2C and SPI controller bindings do not allow label property: apq8016-sbc.dtb: spi@78b7000: Unevaluated properties are not allowed ('label' was unexpected) apq8016-sbc.dtb: i2c@78b6000: Unevaluated properties are not allowed ('label' was unexpected) Signed-off-by: -
Krzysztof Kozlowski authored
liteon,ltr559 light sensor takes VDDIO, not VIO, supply: msm8916-longcheer-l8150.dtb: light-sensor@23: 'vio-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: 3016af34 ("arm64: dts: qcom: msm8916-longcheer-l8150: Add light and proximity sensor") Signed-off-by:
-
Krzysztof Kozlowski authored
st,lis2hh12 accelerometer binding does not allow interrupt-names: msm8916-samsung-gt58.dtb: accelerometer@1d: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
-
Krzysztof Kozlowski authored
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since commit c4a48b0d ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by:
-
Krzysztof Kozlowski authored
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since commit c4a48b0d ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by:
-
Krzysztof Kozlowski authored
Crypto node unit address should match reg. Fixes: b92b0d2f ("arm64: dts: qcom: sm8450: add crypto nodes") Signed-off-by:
-
Konrad Dybcio authored
Hook up 2 out of 4 (the rest are for NPU) BWMONs exposed on the SC7180. This allows for scaling DDR and LLCC independently from cpufreq. Signed-off-by:
-
Vincent Guittot authored
sm8250 faces the same problem with its Energy Model as sdm845. The energy cost of LITTLE cores is reported to be higher than medium or big cores EM computes the energy with formula: energy = OPP's cost / maximum cpu capacity * utilization On v6.4-rc6 we have: max capacity of CPU0 = 284 capacity of CPU0's OPP(1612800 Hz) = 253 cost of CPU0's OPP(1612800 Hz) = 191704 max capacity of CPU4 = 871 capacity of CPU4's OPP(710400 Hz) = 255 cost of CPU4's OPP(710400 Hz) = 343217 Both OPPs have almost the same compute capacity but the estimated energy per unit of utilization will be estimated to: energy CPU0 = 191704 / 284 * 1 = 675 energy CPU4 = 343217 / 871 * 1 = 394 EM estimates that little CPU0 will consume 71% more than medium CPU4 for the same compute capacity. According to [1], little consumes 25% less than medium core for Coremark benchmark at those OPPs for the same duration. Set the dynamic-power-coefficient of CPU0-3 to 105 to fix the energy model for little CPUs. [1] https://github.com/kdrag0n/freqbench/tree/master/results/sm8250/k30s Fixes: 6aabed55 ("arm64: dts: qcom: sm8250: Add CPU capacities and energy model") Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20230615154852.130076-1-vincent.guittot@linaro.orgSigned-off-by:
-
Dmitry Baryshkov authored
In board files MDSS and HDMI nodes do not come next to each other, because labels for HDMI nodes do not have the common mdss_ prefix. Follow the DSI example and enable such grouping by changing the prefix for HDMI labels to mdss_hdmi_*. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
The commit f43b6dc7 ("arm64: dts: qcom: msm8996: rename labels for HDMI nodes") is broken, it changes all the HDMI node names, compatible strings instead of changing just node aliases. Revert the commit in order to land a proper clean version. Reported-by:
-
Konrad Dybcio authored
Add nodes required to enable MDSS/DPU1 on SM6350. There seem to be no additional changes required to support the derivative SoCs, such as SM7225. Signed-off-by:
Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by:
-
Konrad Dybcio authored
The previous ZAP region definition was wrong. Fix it. Note this is not a device-specific fixup, but a fixup to the generic PIL load address. Fixes: 5f82b9cd ("arm64: dts: qcom: Add SM6350 device tree") Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Signed-off-by:
-
Konrad Dybcio authored
Add Adreno, GPU SMMU and GMU nodes to hook up everything that the A619 needs to function properly. Co-developed-by:
-
Konrad Dybcio authored
Add a node for the QFPROM NVMEM hw and define the GPU fuse. Signed-off-by:
-
Konrad Dybcio authored
Add and configure a node for the GPU clock controller. Signed-off-by:
-
Dmitry Baryshkov authored
The DSI PHY on the Qualcomm SM8150 platform requires platform-specific handling. Use the proper SoC-specific compatible string for the DSI PHYs. Reported-by:
Degdag Mohamed <degdagmohamed@gmail.com> Fixes: 2ef3bb17 ("arm64: dts: qcom: sm8150: Add DISPCC node") Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by:
-
Varadarajan Narayanan authored
Add regulator defines Turn on USB related nodes Provide vdd info Reviewed-by:
Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/5021dbf3a28ee073795e7580bfa019df465e16ed.1686289721.git.quic_varada@quicinc.comSigned-off-by:
-
Varadarajan Narayanan authored
Add LDO regulator node Reviewed-by:
-
Varadarajan Narayanan authored
Add USB phy and controller related nodes SS PHY need two supplies and HS PHY needs three supplies. 0.925V and 3.3V are from fixed regulators and 1.8V is generated from PMIC's LDO Reviewed-by:
-
Bjorn Andersson authored
Merge branch 'd1c5aa4a8535c645fdb06df62a562918516ba0c6.1686289721.git.quic_varada@quicinc.com' into HEAD Merge topic branch with USB clock defines for IPQ9574 into the DeviceTree source tree.
-
Varadarajan Narayanan authored
Add the clocks needed for enabling USB in IPQ9574 Reviewed-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Konrad Dybcio authored
Describe the USB3 PHY and hook it up to the USB3 controller. Signed-off-by:
-
Bjorn Andersson authored
The Linux typec_mux implementation required that a property named "svid" was present in the remote node of the of_graph for a match to be found. With the introduction of commit '4aebc4f8 ("usb: typec: mux: Clean up mux_fwnode_match()")', the implementation is aligned with the binding and this property can be dropped - and the associated DeviceTree validation warning resolved. Signed-off-by:
Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by:
-
- 09 Jul, 2023 1 commit
-
-
Linus Torvalds authored
-
