- 11 Sep, 2011 10 commits
-
-
Jiri Pinkava authored
This delay is meaningless. If delay is needed it is device specific and must be reimplemented by specific driver, otherwise no delay is needed. Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz> Acked-by: Vimal Singh <vimal.newwork@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Dmitry Eremin-Solenikov authored
Currently atmel_nand driver used by AT91 and AVR32 calls a special callback which return nand partition table and number of partitions. However in all boards this callback returns just static data. So drop this callback and make atmel_nand use partition table provided statically via platform_data. Nicolas Ferre: I am in favor for a mainline inclusion through linux-mtd tree. Hans-Christian Egtvedt: I'm fine by sending the changes for AVR32 through linux-mtd Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Brian Norris authored
In an attempt to improve the documentation of the BBT code, I am expanding the comments I left in commit: 58373ff0 mtd: nand: more BB Detection refactoring and dynamic scan options Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Brian Norris authored
After several steps of rearrangement and consolidation, it is probably worth re-sequencing the numbers on some of our affected flags in nand.h and bbm.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Brian Norris authored
According to our new prefix rules, we should rename NAND_CREATE_EMPTY_BBT with a NAND_BBT prefix, i.e., NAND_BBT_CREATE_EMPTY. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Brian Norris authored
The NAND_CREATE_EMPTY_BBT flag was added by commit: 453281a9 mtd: nand: introduce NAND_CREATE_EMPTY_BBT This flag is not used within the kernel and not explained well, so I took the liberty to edit its comments. Also, this is a BBT-related flag (and closely tied with NAND_BBT_CREATE) so I'm moving it to bbm.h next to NAND_BBT_CREATE, thus requiring that we use the flag in nand_chip.bbt_options, *not* in nand_chip.options. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Brian Norris authored
Recall the recently added prefix requirements: * "NAND_" for flags in nand.h, used in nand_chip.options * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options or in nand_bbt_descr.options Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH. Again, this flag is found in bbm.h and so should NOT be used in the "nand_chip.options" field. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Brian Norris authored
This patch works with the following three flags from two headers (nand.h and bbm.h): (1) NAND_USE_FLASH_BBT (nand.h) (2) NAND_USE_FLASH_BBT_NO_OOB (nand.h) (3) NAND_BBT_NO_OOB (bbm.h) These flags are all related and interdependent, yet they were in different headers. Flag (2) is simply the combination of (1) and (3) and can be eliminated. This patch accomplishes the following: * eliminate NAND_USE_FLASH_BBT_NO_OOB (i.e., flag (2)) * move NAND_USE_FLASH_BBT (i.e., flag (1)) to bbm.h It's important to note that because (1) and (3) are now both found in bbm.h, they should NOT be used in the "nand_chip.options" field. I removed a small section from the mtdnand DocBook because it referes to NAND_USE_FLASH_BBT in nand.h, which has been moved to bbm.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Brian Norris authored
This patch handles the problems we've been having with using conflicting flags from nand.h and bbm.h in the same nand_chip.options field. We should try to separate these two spaces a little more clearly, and so I have added a bbt_options field to nand_chip. Important notes about nand_chip fields: * bbt_options field should contain ONLY flags from bbm.h. They should be able to pass safely to a nand_bbt_descr data structure. - BBT option flags start with the "NAND_BBT_" prefix. * options field should contian ONLY flags from nand.h. Ideally, they should not be involved in any BBT related options. - NAND chip option flags start with the "NAND_" prefix. * Every flag should have a nice comment explaining what the flag is. While this is not yet the case on all existing flags, please be sure to write one for new flags. Even better, you can help document the code better yourself! Please try to follow these conventions to make everyone's lives easier. Among the flags that are being moved to the new bbt_options field throughout various drivers, etc. are: * NAND_BBT_SCANLASTPAGE * NAND_BBT_SCAN2NDPAGE and there will be more to come. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Brian Norris authored
This patch reverts most of: commit 58373ff0 mtd: nand: more BB Detection refactoring and dynamic scan options According to the discussion at: http://lists.infradead.org/pipermail/linux-mtd/2011-May/035696.html the NAND_BBT_SCANBYTE1AND6 flag, although technically valid, can break some existing ECC layouts that use the 6th byte in the OOB for ECC data. Furthermore, we apparently do not need to scan both bytes 1 and 6 in the OOB region of the devices under consideration; instead, we only need to scan one or the other. Thus, the NAND_BBT_SCANBYTE1AND6 flag is at best unnecessary and at worst a regression. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 15 Aug, 2011 2 commits
-
-
Axel Lin authored
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
- 14 Aug, 2011 13 commits
-
-
Linus Torvalds authored
-
Clemens Ladisch authored
Commit db64fe02 ("mm: rewrite vmap layer") introduced code that does address calculations under the assumption that VMAP_BLOCK_SIZE is a power of two. However, this might not be true if CONFIG_NR_CPUS is not set to a power of two. Wrong vmap_block index/offset values could lead to memory corruption. However, this has never been observed in practice (or never been diagnosed correctly); what caught this was the BUG_ON in vb_alloc() that checks for inconsistent vmap_block indices. To fix this, ensure that VMAP_BLOCK_SIZE always is a power of two. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=31572Reported-by: Pavel Kysilka <goldenfish@linuxsoft.cz> Reported-by: Matias A. Fonzo <selk@dragora.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Nick Piggin <npiggin@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: 2.6.28+ <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: remove unused "ddr" parameter in struct mmc_ios mmc: dw_mmc: Fix DDR mode support. mmc: core: use defined R1_STATE_PRG macro for card status mmc: sdhci: use f_max instead of host->clock for timeouts mmc: sdhci: move timeout_clk calculation farther down mmc: sdhci: check host->clock before using it as a denominator mmc: Revert "mmc: sdhci: Fix SDHCI_QUIRK_TIMEOUT_USES_SDCLK" mmc: tmio: eliminate unused variable 'mmc' warning mmc: esdhc-imx: fix card interrupt loss on freescale eSDHC mmc: sdhci-s3c: Fix build for header change mmc: dw_mmc: Fix mask in IDMAC_SET_BUFFER1_SIZE macro mmc: cb710: fix possible pci_dev leak in cb710_pci_configure() mmc: core: Detect eMMC v4.5 ext_csd entries mmc: mmc_test: avoid stalled file in debugfs mmc: sdhci-s3c: add BROKEN_ADMA_ZEROLEN_DESC quirk mmc: sdhci: pxav3: controller needs 32 bit ADMA addressing mmc: sdhci: fix retuning timer wrongly deleted in sdhci_tasklet_finish
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/stagingLinus Torvalds authored
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (ibmaem) add missing kfree hwmon: (pmbus/lm25066) Ignore byte writes to non-zero pages hwmon: (pmbus) Virtualize pmbus_write_byte
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: Fix compile warning in wm8750.c ASoC: omap: Update e-mail address of Jarkko Nikula ASoC: SAMSUNG: Add I2S0 internal dma driver ASoC: Terminate WM8750 SPI device ID table ASoC: Add missing break in WM8994 probe ALSA: snd-usb-caiaq: Correct offset fields of outbound iso_frame_desc ALSA: azt3328 - adjust error handling code to include debugging code ALSA: hda - Add CONFIG_SND_HDA_POWER_SAVE to stac_vrefout_set() ALSA: usb-audio - Add quirk for BOSS Micro BR-80 ASoC: Fix typo in wm8750 spi_ids ASoC: Fix warning in Speyside WM8962 ASoC: Fix SPI driver binding for WM8987 ASoC: Fix binding of WM8750 on Jive ASoC: WM8903: Free IRQ on device removal ASoC: Tegra: wm8903 machine driver: Allow re-insertion of module ASoC: Tegra: tegra_pcm_deallocate_dma_buffer: Don't OOPS
-
Marcos Souza authored
Remove the name of Sergey Kostyliov as maintainer of befs. In the MAINTAINERS file, befs is orphaned. Signed-off-by: Marcos Souza <marcos.mage@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ralf Thielow authored
Change resource URL to new git tree - (http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git). Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergiu Iordache authored
Add a documentation file describing the usage of Ramoops Signed-off-by: Sergiu Iordache <sergiu@chromium.org> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Mcquade authored
Add better Thunderbird information. Add Thunderbird Registry instructions to: Enable UTF8 & Preformat mode Disable HTML mode Signed-off-by: Paul McQuade <paulmcquad@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
General cleanups to kernel-parameters.txt: - add missing $ARCH that are being used/referenced - alphabetize the parameter restrictions list - spell "IA-64" as listed in arch/ia64/Kconfig instead of "IA64" - remove trailing whitespace - use hyphen in 32-bit etc. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Boyd authored
Usually kernel parameters are documented in kernel-parameters.txt but user_debug is only documented in the Kconfig. Document the option and point to the Kconfig help text for more info. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Luis de Bethencourt authored
Dropping LSD (Linux Source Driver) since it hasn't been available for a long time. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Zac Storer authored
Fixed a spelling error. Signed-off-by: Zac Storer <zac.3.14159@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 13 Aug, 2011 15 commits
-
-
Jaehoon Chung authored
"mmc: dw_mmc: Fix DDR mode support" removed the last user. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Seungwon Jeon authored
Host driver can't get a hint of DDR mode through ios->ddr flag anymore. ios->timing is currently used to inform DDR mode as a substitute. And capability of MMC_CAP_MMC_HIGHSPEED is added for DDR support. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Jaehoon Chung authored
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Andy Shevchenko authored
When timeout_clk is calculated the host->clock could be zero. So, instead of host->clock the calculation now uses mmc->f_max. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Andy Shevchenko authored
This moves the calculation below the assignment of mmc->f_max, which we need for calculating timeout_clk in the next patch in this series. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Andy Shevchenko authored
Sometimes host->clock could be zero which is a legal situation. This patch checks host->clock before usage as a denominator when timeout is calculated. A similar patch is applied for mmc core (see commit e9b86841, "mmc: fix division by zero in MMC core"). Without this patch, the execution of the sdhci_calc_timeout could end up with a backtrace: <0>[ 4.014319] divide error: 0000 [#1] PREEMPT SMP <4>[ 4.014352] Modules linked in: g_ether <4>[ 4.014376] <4>[ 4.014393] Pid: 33, comm: kworker/u:2 Not tainted 3.0.0+ #646 <4>[ 4.014421] EIP: 0060:[<c12fa38e>] EFLAGS: 00010046 CPU: 1 <4>[ 4.014449] EIP is at sdhci_calc_timeout+0x2e/0x100 <4>[ 4.014468] EAX: 00000000 EBX: f5930fc8 ECX: 00000000 EDX: 00000000 <4>[ 4.014488] ESI: f5291de8 EDI: f5291db8 EBP: f5291c6c ESP: f5291c50 <4>[ 4.014508] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 <0>[ 4.014529] Process kworker/u:2 (pid: 33, ti=f5290000 task=f53065a0 task.ti=f5290000) <0>[ 4.014546] Stack: <4>[ 4.014557] 00000082 c1054fdd f5291c78 04000000 f5930fc8 f5291de8 f5291db8 f5291cac <4>[ 4.014611] c12fab7c c107a98b f5291c88 c13b6d3f f593109c f5882000 f5291cac c1054fdd <4>[ 4.014663] 00000000 00000000 f5882000 00000082 f5930fc8 f5291db8 0000000a f5291ccc <0>[ 4.014716] Call Trace: <4>[ 4.014743] [<c1054fdd>] ? mod_timer+0x11d/0x380 <4>[ 4.014770] [<c12fab7c>] sdhci_prepare_data+0x2c/0x3a0 <4>[ 4.014798] [<c107a98b>] ? trace_hardirqs_off+0xb/0x10 <4>[ 4.014827] [<c13b6d3f>] ? _raw_spin_unlock_irqrestore+0x2f/0x60 <4>[ 4.014854] [<c1054fdd>] ? mod_timer+0x11d/0x380 <4>[ 4.014880] [<c12fc7db>] sdhci_send_command+0xdb/0x210 <4>[ 4.014906] [<c12fd5f3>] sdhci_request+0xc3/0x150 <4>[ 4.014932] [<c12ec56a>] mmc_start_request+0xda/0x200 <4>[ 4.014960] [<c120d7c2>] ? __raw_spin_lock_init+0x32/0x60 <4>[ 4.014989] [<c1066a85>] ? __init_waitqueue_head+0x35/0x50 <4>[ 4.015015] [<c12ec70b>] mmc_wait_for_req+0x7b/0x90 <4>[ 4.015045] [<c12f0c67>] mmc_send_cxd_data+0xf7/0x130 <4>[ 4.015076] [<c12ecbc0>] ? mmc_erase+0x140/0x140 <4>[ 4.015102] [<c12f139d>] mmc_send_ext_csd+0x1d/0x20 <4>[ 4.015125] [<c12efef0>] mmc_get_ext_csd+0x70/0x140 <4>[ 4.015151] [<c12effe8>] mmc_compare_ext_csds+0x28/0x190 <4>[ 4.015176] [<c12f039f>] mmc_init_card+0x24f/0x650 <4>[ 4.015201] [<c13b6d5d>] ? _raw_spin_unlock_irqrestore+0x4d/0x60 <4>[ 4.015226] [<c107fd9c>] ? trace_hardirqs_on_caller+0x11c/0x160 <4>[ 4.015255] [<c12f09a4>] mmc_attach_mmc+0xa4/0x190 <4>[ 4.015282] [<c12ee3f0>] mmc_rescan+0x210/0x240 <4>[ 4.015311] [<c105f9b6>] process_one_work+0x176/0x550 <4>[ 4.015336] [<c105f93a>] ? process_one_work+0xfa/0x550 <4>[ 4.015360] [<c12ee1e0>] ? mmc_init_erase+0x140/0x140 <4>[ 4.015385] [<c1061c2a>] worker_thread+0x12a/0x2c0 <4>[ 4.015410] [<c1061b00>] ? manage_workers.clone.18+0x100/0x100 <4>[ 4.015437] [<c1066244>] kthread+0x74/0x80 <4>[ 4.015463] [<c10661d0>] ? __init_kthread_worker+0x60/0x60 <4>[ 4.015490] [<c13b7dfa>] kernel_thread_helper+0x6/0xd <0>[ 4.015507] Code: 57 89 d7 56 53 89 c3 83 ec 10 8b 40 04 8b 72 28 f6 c4 10 89 45 f0 0f 85 91 00 00 00 85 f6 0f 84 c1 00 00 00 8b 4e 04 31 d2 89 c8 <f7> 73 58 ba d3 4d 62 10 89 c1 8b 06 f7 e2 c1 ea 06 01 d1 f7 45 <0>[ 4.015829] EIP: [<c12fa38e>] sdhci_calc_timeout+0x2e/0x100 SS:ESP 0068:f5291c50 Reported-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Andy Shevchenko authored
This reverts commit 4b01681c, which introduced a new potential divide by zero in the process of fixing one. The subsequent commits attempt to fix the issue properly. Signed-off-by: Chris Ball <cjb@laptop.org>
-
Axel Lin authored
Fix below compile warning: CC drivers/mmc/host/tmio_mmc.o drivers/mmc/host/tmio_mmc.c: In function 'tmio_mmc_suspend': drivers/mmc/host/tmio_mmc.c:30: warning: unused variable 'mmc' drivers/mmc/host/tmio_mmc.c: In function 'tmio_mmc_resume': drivers/mmc/host/tmio_mmc.c:45: warning: unused variable 'mmc' Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Tony Lin authored
Apply a workaround for the imx eSDHC controller to avoid missing card interrupts. This makes SDIO work. Signed-off-by: Tony Lin <tony.lin@freescale.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Mark Brown authored
A header change has removed an implicit inclusion of module.h, breaking the build due to the use of THIS_MODULE. Fix that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Shashidhar Hiremath authored
The mask used inside this macro was assuming Buffer_Size1's [BS1's] width to be 14 bits, it is actually 13 bits. Modify masks used in IDMAC_SET_BUFFER1_SIZE such that they use only 13 bits instead of current 14. Signed-off-by: Shashidhar Hiremath <shashidharh@vayavyalabs.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Michał Mirosław authored
Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Kyungmin Park authored
The eMMC v4.5 Spec is released now: EXT_CSD_REV Extended CSD Revision 255-7 Reserved 6 Revision 1.6 (for MMC v4.5) 5 Revision 1.5 (for MMV v4.41) ... Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Andy Shevchenko authored
During card removal and inserting cycle the test file in the debugfs could be stalled until the host driver removes it. Let's keep the file in the linked list and destroy it when card is removed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
-
Jaehoon Chung authored
Samsung SoCs need to set BROKEN_ADMA_ZEROLEN_DESC. (If ADMA operation is more than 65535, maybe set by zero.) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
-