- 22 Apr, 2021 1 commit
-
-
Kevin Hilman authored
Take a pass at cleaning up a bunch of warnings from 'make dtbs_check' that have crept in. Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210421204833.18523-1-khilman@baylibre.com' Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
- 20 Apr, 2021 1 commit
-
-
Arnd Bergmann authored
Merge tag 'bmc-5.13-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt BMC device tree updates for 5.13, round two - Fixes to the first pull request for Rainier - Small changes for Rainier, EthanolX and Tiogapass * tag 'bmc-5.13-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: tiogapass: add hotplug controller ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses ARM: dts: aspeed: Rainier: Update to pass 2 hardware ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes ARM: dts: aspeed: Rainier: Fix humidity sensor bus address ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8 Link: https://lore.kernel.org/r/CACPK8XeJdHmxyJn43Ju5hmxJ7+rJgHmx=ANFaL17YUmp+gOtJg@mail.gmail.comSigned-off-by:
-
- 19 Apr, 2021 10 commits
-
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-for-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Even more Qualcomm ARM64 updates for v5.13 This contains three audio related fixes for the sc7180 Trogdor devices. * tag 'qcom-arm64-for-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sc7180: Update iommu property for simultaneous playback arm64: dts: qcom: sc7180: pompom: Add "dmic_clk_en" + sound model arm64: dts: qcom: sc7180: coachz: Add "dmic_clk_en" Link: https://lore.kernel.org/r/20210419151637.861409-1-bjorn.andersson@linaro.orgSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'qcom-dts-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt More Qualcomm DTS updates for 5.13 This adds CPUfreq, interconnect providers, IPC, remoteproc and IPA to the SDX55 platform and then adds board files for the Telit FN980 TLB and Thundercomm TurboX T55. * tag 'qcom-dts-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: sdx55: add IPA information ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55 dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB dt-bindings: arm: qcom: Add binding for Telit FN980 TLB board ARM: dts: qcom: sdx55: Add Modem remoteproc node ARM: dts: qcom: Fix node name for NAND controller node ARM: dts: qcom: sdx55: Add interconnect nodes ARM: dts: qcom: sdx55: Add SCM node dt-bindings: firmware: scm: Add compatible for SDX55 ARM: dts: qcom: sdx55: Add IMEM and PIL info region ARM: dts: qcom: sdx55: Add modem SMP2P node ARM: dts: qcom: sdx55: Add CPUFreq support ARM: dts: qcom: sdx55: Add support for APCS block ARM: dts: qcom: sdx55: Add support for A7 PLL clock Link: https://lore.kernel.org/r/20210419150956.860423-1-bjorn.andersson@linaro.orgSigned-off-by:
-
V Sujith Kumar Reddy authored
Update iommu property in lpass cpu node for supporting simultaneous playback on headset and speaker. Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
V Sujith Kumar Reddy <vsujithk@codeaurora.org> Signed-off-by:
Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/20210406163330.11996-1-srivasam@codeaurora.orgSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org>
-
Douglas Anderson authored
Match what's downstream for this board. Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210315133924.v2.2.If218189eff613a6c48ba12d75fad992377d8f181@changeidSigned-off-by:
-
Douglas Anderson authored
This was present downstream. Add upstream too. NOTE: upstream I managed to get some sort of halfway state and got one pinctrl entry in the coachz-r1 device tree. Remove that as part of this since it's now in the dtsi. Reviewed-by:
-
Daniel Palmer authored
M5Stack are releasing a new widget based on the SigmaStar SSD202D. We have some support for the SSD202D so lets add a dts for it. Signed-off-by:
Daniel Palmer <daniel@0x0f.com> Link: https://m5stack-store.myshopify.com/products/unitv2-ai-camera-gc2145 Link: https://lore.kernel.org/r/20210417011015.2105280-4-daniel@0x0f.com' Signed-off-by:
-
Daniel Palmer authored
Add a compatible for the M5Stack UnitV2 that is based on the SigmaStar SSD202D (inifinity2m). Signed-off-by:
-
Daniel Palmer authored
M5Stack make various modules for STEM, Makers, IoT. Their UnitV2 is based on a SigmaStar SSD202D SoC which we already have some minimal support for so add a prefix in preparation for UnitV2 board support. Signed-off-by:
-
Matthias Brugger authored
Fix unit names to make dtbs_check happy. Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20210414144643.17435-2-matthias.bgg@kernel.org Link: https://lore.kernel.org/r/20210416143923.23406-3-matthias.bgg@kernel.org' Signed-off-by:
-
Matthias Brugger authored
Fix unit names to make dtbs_check happy. Signed-off-by:
-
- 16 Apr, 2021 6 commits
-
-
Paul Fertser authored
The ADM1278 IC is accessible on I2C bus and on both Wiwynn and Quanta Tioga Pass implementations a pair of parallel 0.5 mOhm resistors is used for current measurement. Signed-off-by:
Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/r/20210415140521.11352-1-fercerpav@gmail.comSigned-off-by:
Joel Stanley <joel@jms.id.au>
-
Konstantin Aladyshev authored
Enable all I2C busses that are used in AMD EthanolX CRB: i2c0 - APML P0 i2c1 - APML P1 i2c2 - FPGA i2c3 - 24LC128 EEPROM i2c4 - P0 Power regulators i2c5 - P1 Power regulators i2c6 - P0/P1 Thermal diode i2c7 - Thermal Sensors i2c8 - BMC I2C Signed-off-by:
Konstantin Aladyshev <aladyshev22@gmail.com> Link: https://lore.kernel.org/r/20210415155300.1135-1-aladyshev22@gmail.comSigned-off-by:
-
Eddie James authored
Add the muxes present in pass 2 and remove the eeproms that were removed. Signed-off-by:
Eddie James <eajames@linux.ibm.com> Signed-off-by:
-
Eddie James authored
The 1S4U system populates fans 0, 1, 2, and 4. Update the dts to reflect this. Fixes: 7f03894a ("ARM: dts: aspeed: Add Rainier 1S4U machine") Signed-off-by:
-
Eddie James authored
The si7021 was incorrectly placed at 0x20 on i2c bus 7. It is at 0x40. Fixes: 9c44db70 ("ARM: dts: aspeed: rainier: Add i2c devices") Signed-off-by:
-
Eddie James authored
The second presence detection PCA9552 was incorrectly added to bus 9. Fixes: 8be44de6 ("ARM: dts: aspeed: Rainier: Add presence GPIOs") Signed-off-by:
-
- 14 Apr, 2021 15 commits
-
-
Alex Elder authored
Add IPA-related nodes and definitions to "sdx55.dtsi". The SMP2P nodes (ipa_smp2p_out and ipa_smp2p_in) are already present. Signed-off-by:
Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20210409155251.955632-1-elder@linaro.orgSigned-off-by:
-
Manivannan Sadhasivam authored
Thundercomm T55 is the development platform based on the Qualcomm SDX55 chipset. This basic support includes support for debug serial, NAND flash, BAM DMA, USB and regulators support. https://www.thundercomm.com/app_en/product/1593506006365532Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408170457.91409-14-manivannan.sadhasivam@linaro.orgSigned-off-by:
-
Manivannan Sadhasivam authored
Add devicetree binding for Thundercomm T55 Dev kit based on SDX55. Acked-by:
-
Manivannan Sadhasivam authored
Telit FN980 TLB is the development platform based on the Qualcomm SDX55 chipset. This basic support includes support for debug serial, NAND flash, BAM DMA, USB and regulators support. Signed-off-by:
-
Manivannan Sadhasivam authored
Add devicetree binding for Telit FN980 TLB board based on SDX55. Acked-by:
-
Manivannan Sadhasivam authored
Add modem support to SDX55 using the PAS remoteproc driver. Signed-off-by:
-
Manivannan Sadhasivam authored
Use the common "nand-controller" node name for NAND controller node to fix the `make dtbs_check` validation for Qcom platforms. Signed-off-by:
-
Manivannan Sadhasivam authored
Add interconnect nodes for the providers in SDX55 platform. Signed-off-by:
-
Manivannan Sadhasivam authored
Add SCM node to enable SCM functionality on SDX55 platform. Signed-off-by:
-
Manivannan Sadhasivam authored
Add devicetree compatible for SCM present in SDX55 platform. Acked-by:
-
Manivannan Sadhasivam authored
Add a simple-mfd representing IMEM on SDX55 and define the PIL relocation info region, so that post mortem tools will be able to locate the loaded remoteproc. Signed-off-by:
-
Manivannan Sadhasivam authored
Add SMP2P nodes for the SDX55 platform to communicate with the modem. Signed-off-by:
-
Manivannan Sadhasivam authored
Add CPUFreq support to SDX55 platform using the cpufreq-dt driver. There is no dedicated hardware block available on this platform to carry on the CPUFreq duties. Hence, it is accomplished using the CPU clock and regulators tied together by the operating points table. Signed-off-by:
-
Manivannan Sadhasivam authored
The APCS block on SDX55 acts as a mailbox controller and also provides clock output for the Cortex A7 CPU. Signed-off-by:
-
Manivannan Sadhasivam authored
On SDX55 there is a separate A7 PLL which is used to provide high frequency clock to the Cortex A7 CPU via a MUX. Signed-off-by:
-
- 13 Apr, 2021 3 commits
-
-
https://github.com/Xilinx/linux-xlnxArnd Bergmann authored
arm64: dts: ZynqMP DT changes for v5.13 - Add power-domains for DP - Remove si5328 node without compatible string * tag 'zynqmp-dt-for-v5.13' of https://github.com/Xilinx/linux-xlnx: arm64: dts: zynqmp: Remove si5328 device nodes arm64: dts: zynqmp: Add power domain for the DisplayPort DMA controller Link: https://lore.kernel.org/r/e422fa9c-3e58-28b4-f6f0-65aa44254131@xilinx.comSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.13-rockchip-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New board the NanoPi R4S, OPP adjustments on rk3399 (sync with vendor and using ranged values to allow better compatibility with regulator steps), gpu opps on px30, infrared receiver on rockpro64, USB3 support on rk3328, MMC alias fixups, dt-compatible fixes. * tag 'v5.13-rockchip-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: move mmc aliases to board dts on rk3399 arm64: dts: rockchip: move mmc aliases to board dts on rk3368 arm64: dts: rockchip: move mmc aliases to board dts on rk3328 arm64: dts: rockchip: move mmc aliases to board dts on rk3308 arm64: dts: rockchip: move mmc aliases to board dts on px30 arm64: dts: rockchip: add new watchdog compatible to rk3399.dtsi arm64: dts: rockchip: add new watchdog compatible to rk3328.dtsi arm64: dts: rockchip: add new watchdog compatible to rk3308.dtsi arm64: dts: rockchip: add new watchdog compatible to px30.dtsi arm64: dts: rockchip: enable dwc3 usb for A95X Z2 arm64: dts: rockchip: add rk3328 dwc3 usb controller node rockchip: rk3399: Add support for FriendlyARM NanoPi R4S dt-bindings: Add doc for FriendlyARM NanoPi R4S arm64: dts: rockchip: add phandle to timer0 on rk3368 arm64: dts: rockchip: add infrared receiver node to rockpro64 arm64: dts: rockchip: drop separate opp table on rk3399-puma arm64: dts: rockchip: used range'd gpu opps on rk3399 arm64: dts: rockchip: synchronize rk3399 opps with vendor kernel arm64: dts: rockchip: Add gpu opp nodes to px30 dtsi Link: https://lore.kernel.org/r/2191862.ElGaqSPkdT@philSigned-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.13-rockchip-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt MMC aliases fixups and some property/compatible cleanups. * tag 'v5.13-rockchip-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: move rv1108 mmcx aliases to board dts files ARM: dts: rockchip: move rk322x mmcx aliases to board dts files ARM: dts: rockchip: remove clock-names property from watchdog node in rv1108.dtsi ARM: dts: rockchip: add new watchdog compatible to rk322x.dtsi ARM: dts: rockchip: add new watchdog compatible to rv1108.dtsi Link: https://lore.kernel.org/r/4638723.31r3eYUQgx@philSigned-off-by:
-
- 12 Apr, 2021 1 commit
-
-
Nicolas Ferre authored
Fix the etm node hex address to lower case for matching regexp specification and removing the additional warning that looks like: arch/arm/boot/dts/at91-sama5d2_ptc_ek.dt.yaml: /: 'etm@73C000' does not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+' Reported-by:
Arnd Bergmann <arnd@kernel.org> Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
- 11 Apr, 2021 3 commits
-
-
Heiko Stuebner authored
As suggested by Arnd Bergmann, the newly added mmc aliases should be board specific, so move them from the general dtsi to the individual boards. Suggested-by:
Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210324122235.1059292-7-heiko@sntech.de
-
Heiko Stuebner authored
As suggested by Arnd Bergmann, the newly added mmc aliases should be board specific, so move them from the general dtsi to the individual boards. Suggested-by:
-
Heiko Stuebner authored
As suggested by Arnd Bergmann, the newly added mmc aliases should be board specific, so move them from the general dtsi to the individual boards. Suggested-by:
-
