- 25 Aug, 2023 2 commits
-
-
Sui Jingfeng authored
Because the gma_irq_install() is call after psb_gem_mm_init() function, when psb_gem_mm_init() fails, the interrupt line haven't been allocated. Yet the gma_irq_uninstall() is called in the psb_driver_unload() function without checking if checking the irq is registered or not. The calltrace is appended as following: [ 20.539253] ioremap memtype_reserve failed -16 [ 20.543895] gma500 0000:00:02.0: Failure to map stolen base. [ 20.565049] ------------[ cut here ]------------ [ 20.565066] Trying to free already-free IRQ 16 [ 20.565087] WARNING: CPU: 1 PID: 381 at kernel/irq/manage.c:1893 free_irq+0x209/0x370 [ 20.565316] CPU: 1 PID: 381 Comm: systemd-udevd Tainted: G C 6.5.0-rc1+ #368 [ 20.565329] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./IMB-140D Plus, BIOS P1.10 11/18/2013 [ 20.565338] RIP: 0010:free_irq+0x209/0x370 [ 20.565357] Code: 41 5d 41 5e 41 5f 5d 31 d2 89 d1 89 d6 89 d7 41 89 d1 c3 cc cc cc cc 8b 75 d0 48 c7 c7 e0 77 12 9f 4c 89 4d c8 e8 57 fe f4 ff <0f> 0b 48 8b 75 c8 4c 89 f7 e8 29 f3 f1 00 49 8b 47 40 48 8b 40 78 [ 20.565369] RSP: 0018:ffffae3b40733808 EFLAGS: 00010046 [ 20.565382] RAX: 0000000000000000 RBX: ffff9f8082bfe000 RCX: 0000000000000000 [ 20.565390] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 20.565397] RBP: ffffae3b40733840 R08: 0000000000000000 R09: 0000000000000000 [ 20.565405] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f80871c3100 [ 20.565413] R13: ffff9f80835d3360 R14: ffff9f80835d32a4 R15: ffff9f80835d3200 [ 20.565424] FS: 00007f13d36458c0(0000) GS:ffff9f8138880000(0000) knlGS:0000000000000000 [ 20.565434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 20.565441] CR2: 00007f0d046f3f20 CR3: 0000000006c8c000 CR4: 00000000000006e0 [ 20.565450] Call Trace: [ 20.565458] <TASK> [ 20.565470] ? show_regs+0x72/0x90 [ 20.565488] ? free_irq+0x209/0x370 [ 20.565504] ? __warn+0x8d/0x160 [ 20.565520] ? free_irq+0x209/0x370 [ 20.565536] ? report_bug+0x1bb/0x1d0 [ 20.565555] ? handle_bug+0x46/0x90 [ 20.565572] ? exc_invalid_op+0x19/0x80 [ 20.565587] ? asm_exc_invalid_op+0x1b/0x20 [ 20.565607] ? free_irq+0x209/0x370 [ 20.565625] ? free_irq+0x209/0x370 [ 20.565644] gma_irq_uninstall+0x15b/0x1e0 [gma500_gfx] [ 20.565728] psb_driver_unload+0x27/0x190 [gma500_gfx] [ 20.565800] psb_pci_probe+0x5d2/0x790 [gma500_gfx] [ 20.565873] local_pci_probe+0x48/0xb0 [ 20.565892] pci_device_probe+0xc8/0x280 [ 20.565912] really_probe+0x1d2/0x440 [ 20.565929] __driver_probe_device+0x8a/0x190 [ 20.565944] driver_probe_device+0x23/0xd0 [ 20.565957] __driver_attach+0x10f/0x220 [ 20.565971] ? __pfx___driver_attach+0x10/0x10 [ 20.565984] bus_for_each_dev+0x7a/0xe0 [ 20.566002] driver_attach+0x1e/0x30 [ 20.566014] bus_add_driver+0x127/0x240 [ 20.566029] driver_register+0x64/0x140 [ 20.566043] ? __pfx_psb_init+0x10/0x10 [gma500_gfx] [ 20.566111] __pci_register_driver+0x68/0x80 [ 20.566128] psb_init+0x2c/0xff0 [gma500_gfx] [ 20.566194] do_one_initcall+0x46/0x330 [ 20.566214] ? kmalloc_trace+0x2a/0xb0 [ 20.566233] do_init_module+0x6a/0x270 [ 20.566250] load_module+0x207f/0x23a0 [ 20.566278] init_module_from_file+0x9c/0xf0 [ 20.566293] ? init_module_from_file+0x9c/0xf0 [ 20.566315] idempotent_init_module+0x184/0x240 [ 20.566335] __x64_sys_finit_module+0x64/0xd0 [ 20.566352] do_syscall_64+0x59/0x90 [ 20.566366] ? ksys_mmap_pgoff+0x123/0x270 [ 20.566378] ? __secure_computing+0x9b/0x110 [ 20.566392] ? exit_to_user_mode_prepare+0x39/0x190 [ 20.566406] ? syscall_exit_to_user_mode+0x2a/0x50 [ 20.566420] ? do_syscall_64+0x69/0x90 [ 20.566433] ? do_syscall_64+0x69/0x90 [ 20.566445] ? do_syscall_64+0x69/0x90 [ 20.566458] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 20.566472] RIP: 0033:0x7f13d351ea3d [ 20.566485] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 a3 0f 00 f7 d8 64 89 01 48 [ 20.566496] RSP: 002b:00007ffe566c1fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 20.566510] RAX: ffffffffffffffda RBX: 000055e66806eec0 RCX: 00007f13d351ea3d [ 20.566519] RDX: 0000000000000000 RSI: 00007f13d36d9441 RDI: 0000000000000010 [ 20.566527] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000002 [ 20.566535] R10: 0000000000000010 R11: 0000000000000246 R12: 00007f13d36d9441 [ 20.566543] R13: 000055e6681108c0 R14: 000055e66805ba70 R15: 000055e66819a9c0 [ 20.566559] </TASK> [ 20.566566] ---[ end trace 0000000000000000 ]--- Signed-off-by:
Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230727185855.713318-1-suijingfeng@loongson.cn
-
Jorge Maidana authored
Remove identical duplicate block of macro definitions in drivers/gpu/drm/gma500/psb_drv.h. Signed-off-by:
Jorge Maidana <jorgem.linux@gmail.com> Signed-off-by:
-
- 23 Aug, 2023 1 commit
-
-
Danilo Krummrich authored
Currently, NO_PREFETCH is passed implicitly through drm_nouveau_gem_pushbuf_push::length and drm_nouveau_exec_push::va_len. Since this is a direct representation of how the HW is programmed it isn't really future proof for a uAPI. Hence, fix this up for the new uAPI and split up the va_len field of struct drm_nouveau_exec_push, such that we keep 32bit for va_len and 32bit for flags. For drm_nouveau_gem_pushbuf_push::length at least provide NOUVEAU_GEM_PUSHBUF_NO_PREFETCH to indicate the bit shift. While at it, fix up nv50_dma_push() as well, such that the caller doesn't need to encode the NO_PREFETCH flag into the length parameter. Signed-off-by:
Danilo Krummrich <dakr@redhat.com> Reviewed-by:
Faith Ekstrand <faith.ekstrand@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230823181746.3446-1-dakr@redhat.com
-
- 22 Aug, 2023 2 commits
-
-
Danilo Krummrich authored
Transfer the region pointer of a uvma to the new uvma(s) on re-map to prevent potential shader faults when the re-mapped uvma(s) are unmapped. Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230820222920.2344-1-dakr@redhat.com
-
Danilo Krummrich authored
If a sched job depends on a dma-fence from a job from the same GPU scheduler instance, but a different scheduler entity, the GPU scheduler does only wait for the particular job to be scheduled, rather than for the job to fully complete. This is due to the GPU scheduler assuming that there is a scheduler instance per ring. However, the current implementation, in order to avoid arbitrary amounts of kthreads, has a single scheduler instance while scheduler entities represent rings. As a workaround, set the DRM_SCHED_FENCE_DONT_PIPELINE for all out-fences in order to force the scheduler to wait for full job completion for dependent jobs from different entities and same scheduler instance. There is some work in progress [1] to address the issues of firmware schedulers; once it is in-tree the scheduler topology in Nouveau should be re-worked accordingly. [1] https://lore.kernel.org/dri-devel/20230801205103.627779-1-matthew.brost@intel.com/Signed-off-by:
Faith Ekstrand <faith.ekstrand@collaboralcom> Link: https://patchwork.freedesktop.org/patch/msgid/20230811010632.2473-1-dakr@redhat.com
-
- 21 Aug, 2023 4 commits
-
-
Daniel Stone authored
Since there's a lot of confusion around this, document both the rules and the best practices around negotiating, allocating, importing, and using buffers when crossing context/process/device/subsystem boundaries. This ties up all of dma-buf, formats and modifiers, and their usage. Signed-off-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
Simon Ser <contact@emersion.fr> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20230803154908.105124-4-daniels@collabora.com
-
Daniel Stone authored
Make it a little bit more clear what's going on and fix some formatting. Signed-off-by:
-
Ruan Jinjie authored
It is not possible for platform_get_irq_byname() to return 0. Use the return value from platform_get_irq_byname(). Signed-off-by:
Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Douglas Anderson authored
There's an obvious copy-paste error in the description of output_bus_cfg. Fix it. Fixes: f32df58a ("drm/bridge: Add the necessary bits to support bus format negotiation") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230817094808.1.I41b04c3a8305c9f1c17af886c327941c5136ca3b@changeid
-
- 16 Aug, 2023 2 commits
-
-
Diogo Ivo authored
The JDI LPM102A188A is a 2560x1800 IPS panel found in the Google Pixel C. This driver is based on the downstream GPLv2 driver released by Google written by Sean Paul [1], which was then adapted to the newer kernel APIs. [1]: https://android.googlesource.com/kernel/tegra/+/refs/heads/android-tegra-dragon-3.18-oreo/drivers/gpu/drm/panel/panel-jdi-lpm102a188a.cSigned-off-by:
Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Diogo Ivo authored
The LPM102A188A is a 10.2" 2560x1800 IPS panel found in the Google Pixel C. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
- 14 Aug, 2023 5 commits
-
-
David Heidelberg authored
Use the dev_err_probe() helper to simplify error handling during probe. This also handle scenario, when EDEFER is returned and useless error is printed. Fixes error: panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517 Signed-off-by:
David Heidelberg <david@ixit.cz> Reviewed-by:
-
David Heidelberg authored
Link is no longer functional and web.archive.org doesn't provide PDF with detail information. Some informations can be found from web.archive.org here: https://web.archive.org/web/20170629205602/http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheetSigned-off-by:
-
Thomas Weber authored
Add support for the Mitsubishi AA084XE01 panel which is an 8.4 inch XGA TFT-LCD module for industrial use. Link: https://www.mouser.fr/datasheet/2/274/aa084xe01_e-364171.pdfSigned-off-by:
Thomas Weber <thomas.weber@corscience.de> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
-
Miquel Raynal authored
Add Mitsubishi AA084XE01 8.4" XGA TFT LCD panel compatible string. Link: https://www.mouser.fr/datasheet/2/274/aa084xe01_e-364171.pdfSigned-off-by:
-
Liu Ying authored
Add the device link when panel bridge is attached and delete the link when panel bridge is detached. The drm device is the consumer while the panel device is the supplier. This makes sure that the drm device suspends eariler and resumes later than the panel device, hence resolves problems where the order is reversed, like the problematic case mentioned in the below link. Link: https://lore.kernel.org/lkml/CAPDyKFr0XjrU_udKoUKQ_q8RWaUkyqL+8fV-7s1CTMqi7u3-Rg@mail.gmail.com/T/Suggested-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Liu Ying <victor.liu@nxp.com> Reviewed-by:
-
- 12 Aug, 2023 6 commits
-
-
Jonas Karlman authored
Add missing call to crtc reset helper to properly vblank reset. Also move vop2_crtc_reset and call vop2_crtc_destroy_state to simplify and remove duplicated code. Fixes: 604be855 ("drm/rockchip: Add VOP2 driver") Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230621223311.2239547-6-jonas@kwiboo.se
-
Jonas Karlman authored
It's possible for users to try to duplicate the CRTC state even when the state doesn't exist. drm_atomic_helper_crtc_duplicate_state() (and other users of __drm_atomic_helper_crtc_duplicate_state()) already guard this with a WARN_ON() instead of crashing, so let's do that here too. Fixes: 604be855 ("drm/rockchip: Add VOP2 driver") Signed-off-by:
-
Jonas Karlman authored
Allocation of crtc_state may fail in vop_crtc_reset, causing an invalid pointer to be passed to __drm_atomic_helper_crtc_reset. Fix this by adding a NULL check of crtc_state, similar to other drivers. Fixes: 01e2eaf4 ("drm/rockchip: Convert to using __drm_atomic_helper_crtc_reset() for reset.") Signed-off-by:
-
Jonas Karlman authored
vop_plane_destroy and vop_crtc_destroy are plain wrappers around drm_plane_cleanup and drm_crtc_cleanup. Use them directly as plane and crtc funcs to closer match VOP2 driver. Signed-off-by:
-
Jonas Karlman authored
struct rockchip_crtc_state members such as output_type, output_bpc and enable_afbc is always reset to zero in the atomic_duplicate_state crtc funcs. Fix this by using kmemdup on the subclass rockchip_crtc_state struct. Fixes: 4e257d9e ("drm/rockchip: get rid of rockchip_drm_crtc_mode_config") Signed-off-by:
-
Harshit Mogalapalli authored
There are two problems in lsdc_pixel_pll_setup() 1. If kzalloc() fails then call iounmap() to release the resources. 2. Both kzalloc and ioremap does not return error pointers on failure, so using IS_ERR_OR_NULL() checks is a bit confusing and not very right, fix this by changing those to NULL checks instead. Fixes: f39db26c ("drm: Add kms driver for loongson display controller") Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by:
Sui Jingfeng <sui.jingfeng@linux.dev> Link: https://patchwork.freedesktop.org/patch/msgid/20230720123950.543082-1-harshit.m.mogalapalli@oracle.com
-
- 11 Aug, 2023 6 commits
-
-
Alexander Stein authored
atomic_get_input_bus_fmts is only implemented for LVDS decoders, resulting that LVDS encoders only support bus format MEDIA_BUS_FMT_FIXED. This results in warnings like: mxsfb 21c8000.lcdif: Bridge does not provide bus format, assuming MEDIA_BUS_FMT_RGB888_1X24. Please fix bridge driver by handling atomic_get_input_bus_fmts. Fix this by reusing lvds_codec_atomic_get_input_bus_fmts currently used for LVDS decoders. Use RGB888_1X24 for LVDS encoders. This also allows removing the dedicated struct drm_bridge_funcs for decoders. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
Marek Szyprowski authored
Samsung DSIM used in older Exynos SoCs (like Exynos 4210, 4x12, 3250) doesn't report empty level of packer header FIFO. In case of those SoCs, use the old way of waiting for empty command tranfsfer FIFO, removed recently by commit 14806c64 ("drm: bridge: samsung-dsim: Drain command transfer FIFO before transfer"). Fixes: 14806c64 ("drm: bridge: samsung-dsim: Drain command transfer FIFO before transfer") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Randy Dunlap authored
Three DRM bridge drivers select GENERIC_PHY_MIPI_DPHY when GENERIC_PHY might not be set. This causes Kconfig warnings and a build error. WARNING: unmet direct dependencies detected for GENERIC_PHY_MIPI_DPHY Depends on [n]: GENERIC_PHY [=n] Selected by [y]: - DRM_NWL_MIPI_DSI [=y] && DRM_BRIDGE [=y] && DRM [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y] - DRM_SAMSUNG_DSIM [=y] && DRM [=y] && DRM_BRIDGE [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y] (drm/bridge/cadence/Kconfig was found by inspection.) aarch64-linux-ld: drivers/gpu/drm/bridge/samsung-dsim.o: in function `samsung_dsim_set_phy_ctrl': drivers/gpu/drm/bridge/samsung-dsim.c:731: undefined reference to `phy_mipi_dphy_get_default_config_for_hsclk' Prevent these warnings and build error by also selecting GENERIC_PHY whenever selecting GENERIC_PHY_MIPI_DPHY. Fixes: fced5a36 ("drm/bridge: cdns: Convert to phy framework") Fixes: 44cfc623 ("drm/bridge: Add NWL MIPI DSI host controller support") Fixes: 171b3b1e ("drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
Aleksandr Nogikh <nogikh@google.com> Link: lore.kernel.org/r/20230803144227.2187749-1-nogikh@google.com Cc: Adam Ford <aford173@gmail.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Guido Günther <agx@sigxcpu.org> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Robert Foss <rfoss@kernel.org> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Adam Ford <aford173@gmail.com> Tested-by:
Guido Günther <agx@sigxcpu.org> Signed-off-by:
-
Marek Vasut authored
The ULPS EXIT is initialized to 0xaf in downstream BSP as well as older revisions of this patchset, in newer revisions of the DSIM patchset it was left out and set to 0. Fix it. Fixes: 4d562c70 ("drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support") Signed-off-by:
-
Karolina Stolarek authored
Satisfy MMU dependency when testing TTM with KUnit. This fixes compilation errors on platforms that don't select this option by default. Signed-off-by:
Karolina Stolarek <karolina.stolarek@intel.com> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308110133.f0lhFwMV-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202308111032.enU8IisR-lkp@intel.com/Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230811113649.697886-1-karolina.stolarek@intel.comSigned-off-by:
-
Stanislaw Gruszka authored
Add comments regarding new DRM_IVPU_PARAM_CAPABILITIES param. Signed-off-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230810080707.3545883-1-stanislaw.gruszka@linux.intel.com
-
- 10 Aug, 2023 11 commits
-
-
Dave Airlie authored
I think there are limit checks in place for most things but the new uAPI wants to not have them. Add a limit check and use the vmemdup_user helper instead. Signed-off-by:
-
Jagan Teki authored
RV1126 MIPI DSI supports V1.2 DPHY with 4 lanes and 1Gbps transfer rate for lane. Add support for it. Signed-off-by:
Jagan Teki <jagan@edgeble.ai> Signed-off-by:
-
Jagan Teki authored
Document the MIPI DSI for Rockchip RV1126, which is different from other SoCs variants. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Jagan Teki authored
RV1126 VOP_LITE supports the video output processing ofMIPI DSI, RGB display interfaces with max output resolution of 1920x1080. Add support for rv1126 vop. Signed-off-by:
-
Jagan Teki authored
The VOP on Rockchip's RV1126 SoC is different from other SoC's VOP implementations, so add a separate compatible for it. Signed-off-by:
-
Yue Haibing authored
Commit cd3a8a59 ("drm/ttm: remove ttm_bo_(un)lock_delayed_workqueue") removed the implementations but not the declarations. Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Reviewed-by:
-
Danilo Krummrich authored
drm_exec_prepare_obj() and drm_exec_prepare_array() both reserve dma-fence slots and hence a dma_resv_list without ever freeing it. Make sure to call drm_gem_private_object_fini() for each GEM object passed to drm_exec_prepare_obj()/drm_exec_prepare_array() throughout the test to fix this up. While at it, remove some trailing empty lines. Fixes: 9710631c ("drm: add drm_exec selftests v4") Signed-off-by:
-
Miquel Raynal authored
On the SoC host controller, the pixel clock can be: * standard: data is launched on the rising edge * inverted: data is launched on the falling edge Some panels may need the inverted option to be used so let's support this DRM flag. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230609144843.851327-1-miquel.raynal@bootlin.com
-
Dmitry Osipenko authored
Panfrost IRQ handler may stuck for a long time, for example this happens when there is a bad HDMI connection and HDMI handler takes a long time to finish processing, holding Panfrost. Make Panfrost's job timeout handler to sync IRQ before checking fence signal status in order to prevent spurious job timeouts due to a slow IRQ processing. Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # MediaTek MT8192 and MT8195 Chromebooks Signed-off-by:
Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by:
-
Christian König authored
Not really a common use case, but let's make sure that we don't accidentially break that somehow. CC: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
-
Christian König authored
GCC forbids to jump to labels in loop conditions and a new clang check stumbled over this. So instead using a local label inside the loop condition use an unique label outside of it. Fixes: 09593216 ("drm: execution context for GEM buffers v7") Link: https://gcc.gnu.org/onlinedocs/gcc/Statement-Exprs.html Link: https://github.com/ClangBuiltLinux/linux/issues/1890 Link: https://github.com/llvm/llvm-project/commit/20219106060208f0c2f5d096eb3aed7b712f5067Reported-by:
Nathan Chancellor <nathan@kernel.org> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> CC: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
- 09 Aug, 2023 1 commit
-
-
Karolina Stolarek authored
Add KUnit tests that exercise page allocation using page pools and freeing pages, either by returning them to the pool or freeing them. Add a basic test for ttm_pool cleanup. Introduce helpers to create a dummy ttm_buffer_object. Signed-off-by:
-
