- 16 Jan, 2019 40 commits
-
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 67a3b63a upstream. gcc-8 points out a condition that almost certainly doesn't do what the author had in mind: drivers/gpu/drm/gma500/mdfld_intel_display.c: In function 'mdfldWaitForPipeEnable': drivers/gpu/drm/gma500/mdfld_intel_display.c:102:37: error: bitwise comparison always evaluates to false [-Werror=tautological-compare] This changes it to a simple bit mask operation to check whether the bit is set. Fixes: 026abc33 ("gma500: initial medfield merge") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170905074741.435324-1-arnd@arndb.deSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Sultan Alsawaf authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 000ade80 upstream. By passing a limit of 2 bytes to strncat, strncat is limited to writing fewer bytes than what it's supposed to append to the name here. Since the bounds are checked on the line above this, just remove the string bounds checks entirely since they're unneeded. Signed-off-by:
Sultan Alsawaf <sultanxda@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 166126c1 upstream. gcc 8.1.0 complains: fs/kernfs/symlink.c:91:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length fs/kernfs/symlink.c: In function 'kernfs_iop_get_link': fs/kernfs/symlink.c:88:14: note: length computed here Using strncpy() is indeed less than perfect since the length of data to be copied has already been determined with strlen(). Replace strncpy() with memcpy() to address the warning and optimize the code a little. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 38c7b224 upstream. New versions of gcc reasonably warn about the odd pattern of strncpy(p, q, strlen(q)); which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case. There was a comment about _why_ the code used strncpy - to avoid the terminating NUL byte, but memcpy does the same and avoids the warning. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 77d2a24b upstream. gcc 8.1.0 complains: lib/kobject.c:128:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] lib/kobject.c: In function 'kobject_get_path': lib/kobject.c:125:13: note: length computed here Using strncpy() is indeed less than perfect since the length of data to be copied has already been determined with strlen(). Replace strncpy() with memcpy() to address the warning and optimize the code a little. Signed-off-by:
-
Stephen Rothwell authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 217c3e01 upstream. They are too noisy Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 3756f640 upstream. gcc-8 warns about using strncpy() with the source size as the limit: fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] This is indeed slightly suspicious, as it protects us from source arguments without NUL-termination, but does not guarantee that the destination is terminated. This keeps the strncpy() to ensure we have properly padded target buffer, but ensures that we use the correct length, by passing the actual length of the destination buffer as well as adding a build-time check to ensure it is exactly TASK_COMM_LEN. There are only 23 callsites which I all reviewed to ensure this is currently the case. We could get away with doing only the check or passing the right length, but it doesn't hurt to do both. Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.deSigned-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
Ingo Molnar <mingo@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Serge Hallyn <serge@hallyn.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Aleksa Sarai <asarai@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Xiongfeng Wang authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 321cb030 upstream. gcc-8 reports many -Wpacked-not-aligned warnings. The below are some examples. ./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct ceph_entity_addr' is less than 8 [-Wpacked-not-aligned] } __attribute__ ((packed)); ./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct ceph_entity_addr' is less than 8 [-Wpacked-not-aligned] } __attribute__ ((packed)); ./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct ceph_entity_addr' is less than 8 [-Wpacked-not-aligned] } __attribute__ ((packed)); This patch suppresses this kind of warnings for default setting. Signed-off-by:
Xiongfeng Wang <xiongfeng.wang@linaro.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 6484a677 upstream. gcc '-Wunused-but-set-variable' warning: drivers/misc/mic/scif/scif_rma.c: In function 'scif_create_remote_lookup': drivers/misc/mic/scif/scif_rma.c:373:25: warning: variable 'vmalloc_num_pages' set but not used [-Wunused-but-set-variable] 'vmalloc_num_pages' should be used to determine if the address is within the vmalloc range. Fixes: ba612aa8 ("misc: mic: SCIF memory registration and unregistration") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Michael Niewöhner authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit effd14f6 upstream. Cherry G230 Stream 2.0 (G85-231) and 3.0 (G85-232) need this quirk to function correctly. This fixes a but where double pressing numlock locks up the device completely with need to replug the keyboard. Signed-off-by:
Michael Niewöhner <linux@mniewoehner.de> Tested-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit a84a1bcc upstream. There are two new Realtek card readers require ums-realtek to work correctly. Add the new IDs to support them. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Josef Bacik authored
BugLink: https://bugs.launchpad.net/bugs/1811077 We want to release the unused reservation we have since it refills the delayed refs reserve, which will make everything go smoother when running the delayed refs if we're short on our reservation. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Liu Bo <bo.liu@linux.alibaba.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Richard Genoud authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 77e75fda upstream. of_dma_controller_free() was not called on module onloading. This lead to a soft lockup: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! Modules linked in: at_hdmac [last unloaded: at_hdmac] when of_dma_request_slave_channel() tried to call ofdma->of_dma_xlate(). Cc: stable@vger.kernel.org Fixes: bbe89c8e ("at_hdmac: move to generic DMA binding") Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Richard Genoud authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 98f5f932 upstream. The leak was found when opening/closing a serial port a great number of time, increasing kmalloc-32 in slabinfo. Each time the port was opened, dma_request_slave_channel() was called. Then, in at_dma_xlate(), atslave was allocated with devm_kzalloc() and never freed. (Well, it was free at module unload, but that's not what we want). So, here, kzalloc is more suited for the job since it has to be freed in atc_free_chan_resources(). Cc: stable@vger.kernel.org Fixes: bbe89c8e ("at_hdmac: move to generic DMA binding") Reported-by:
Mario Forner <m.forner@be4energy.com> Suggested-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by:
-
Pan Bian authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit ecebf55d upstream. The function ext2_xattr_set calls brelse(bh) to drop the reference count of bh. After that, bh may be freed. However, following brelse(bh), it reads bh->b_data via macro HDR(bh). This may result in a use-after-free bug. This patch moves brelse(bh) after reading field. CC: stable@vger.kernel.org Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 9a20332a upstream. Some spurious calls of snd_free_pages() have been overlooked and remain in the error paths of sparc cs4231 driver code. Since runtime->dma_area is managed by the PCM core helper, we shouldn't release manually. Drop the superfluous calls. Reviewed-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit e1a7bfe3 upstream. The procedure for adding a user control element has some window opened for race against the concurrent removal of a user element. This was caught by syzkaller, hitting a KASAN use-after-free error. This patch addresses the bug by wrapping the whole procedure to add a user control element with the card->controls_rwsem, instead of only around the increment of card->user_ctl_count. This required a slight code refactoring, too. The function snd_ctl_add() is split to two parts: a core function to add the control element and a part calling it. The former is called from the function for adding a user control element inside the controls_rwsem. One change to be noted is that snd_ctl_notify() for adding a control element gets called inside the controls_rwsem as well while it was called outside the rwsem. But this should be OK, as snd_ctl_notify() takes another (finer) rwlock instead of rwsem, and the call of snd_ctl_notify() inside rwsem is already done in another code path. Reported-by: syzbot+dc09047bce3820621ba2@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 7194eda1 upstream. The function snd_ac97_put_spsa() gets the bit shift value from the associated private_value, but it extracts too much; the current code extracts 8 bit values in bits 8-15, but this is a combination of two nibbles (bits 8-11 and bits 12-15) for left and right shifts. Due to the incorrect bits extraction, the actual shift may go beyond the 32bit value, as spotted recently by UBSAN check: UBSAN: Undefined behaviour in sound/pci/ac97/ac97_codec.c:836:7 shift exponent 68 is too large for 32-bit type 'int' This patch fixes the shift value extraction by masking the properly with 0x0f instead of 0xff. Reported-and-tested-by:
Meelis Roos <mroos@linux.ee> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 7b691541 upstream. Some spurious calls of snd_free_pages() have been overlooked and remain in the error paths of wss driver code. Since runtime->dma_area is managed by the PCM core helper, we shouldn't release manually. Drop the superfluous calls. Reviewed-by:
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit f505754f upstream. We were using the path name received from user space without checking that it is null terminated. While btrfs-progs is well behaved and does proper validation and null termination, someone could call the ioctl and pass a non-null terminated patch, leading to buffer overrun problems in the kernel. The ioctl is protected by CAP_SYS_ADMIN. So just set the last byte of the path to a null character, similar to what we do in other ioctls (add/remove/resize device, snapshot creation, etc). CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
Max Filippov authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 03bc996a upstream. Coprocessor context offsets are used by the assembly code that moves coprocessor context between the individual fields of the thread_info::xtregs_cp structure and coprocessor registers. This fixes coprocessor context clobbering on flushing and reloading during normal user code execution and user process debugging in the presence of more than one coprocessor in the core configuration. Cc: stable@vger.kernel.org Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Max Filippov authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 2958b666 upstream. coprocessor_flush_all may be called from a context of a thread that is different from the thread being flushed. In that case contents of the cpenable special register may not match ti->cpenable of the target thread, resulting in unhandled coprocessor exception in the kernel context. Set cpenable special register to the ti->cpenable of the target register for the duration of the flush and restore it afterwards. This fixes the following crash caused by coprocessor register inspection in native gdb: (gdb) p/x $w0 Illegal instruction in kernel: sig: 9 [#1] PREEMPT Call Trace: ___might_sleep+0x184/0x1a4 __might_sleep+0x41/0xac exit_signals+0x14/0x218 do_exit+0xc9/0x8b8 die+0x99/0xa0 do_illegal_instruction+0x18/0x6c common_exception+0x77/0x77 coprocessor_flush+0x16/0x3c arch_ptrace+0x46c/0x674 sys_ptrace+0x2ce/0x3b4 system_call+0x54/0x80 common_exception+0x77/0x77 note: gdb[100] exited with preempt_count 1 Killed Cc: stable@vger.kernel.org Signed-off-by:
-
Junaid Shahid authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 0e0fee5c upstream. When a guest page table is updated via an emulated write, kvm_mmu_pte_write() is called to update the shadow PTE using the just written guest PTE value. But if two emulated guest PTE writes happened concurrently, it is possible that the guest PTE and the shadow PTE end up being out of sync. Emulated writes do not mark the shadow page as unsync-ed, so this inconsistency will not be resolved even by a guest TLB flush (unless the page was marked as unsync-ed at some other point). This is fixed by re-reading the current value of the guest PTE after the MMU lock has been acquired instead of just using the value that was written prior to calling kvm_mmu_pte_write(). Signed-off-by:
Junaid Shahid <junaids@google.com> Reviewed-by:
Wanpeng Li <wanpengli@tencent.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Bernd Eckstein authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit 45611c61 ] The bug is not easily reproducable, as it may occur very infrequently (we had machines with 20minutes heavy downloading before it occurred) However, on a virual machine (VMWare on Windows 10 host) it occurred pretty frequently (1-2 seconds after a speedtest was started) dev->tx_skb mab be freed via dev_kfree_skb_irq on a callback before it is set. This causes the following problems: - double free of the skb or potential memory leak - in dmesg: 'recvmsg bug' and 'recvmsg bug 2' and eventually general protection fault Example dmesg output: [ 134.841986] ------------[ cut here ]------------ [ 134.841987] recvmsg bug: copied 9C24A555 seq 9C24B557 rcvnxt 9C25A6B3 fl 0 [ 134.841993] WARNING: CPU: 7 PID: 2629 at /build/linux-hwe-On9fm7/linux-hwe-4.15.0/net/ipv4/tcp.c:1865 tcp_recvmsg+0x44d/0xab0 [ 134.841994] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi [ 134.842046] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic #37~16.04.1-Ubuntu [ 134.842046] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 134.842048] RIP: 0010:tcp_recvmsg+0x44d/0xab0 [ 134.842048] RSP: 0018:ffffa6630422bcc8 EFLAGS: 00010286 [ 134.842049] RAX: 0000000000000000 RBX: ffff997616f4f200 RCX: 0000000000000006 [ 134.842049] RDX: 0000000000000007 RSI: 0000000000000082 RDI: ffff9976257d6490 [ 134.842050] RBP: ffffa6630422bd98 R08: 0000000000000001 R09: 000000000004bba4 [ 134.842050] R10: 0000000001e00c6f R11: 000000000004bba4 R12: ffff99760dee3000 [ 134.842051] R13: 0000000000000000 R14: ffff99760dee3514 R15: 0000000000000000 [ 134.842051] FS: 00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000 [ 134.842052] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 134.842053] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0 [ 134.842055] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 134.842055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 134.842057] Call Trace: [ 134.842060] ? aa_sk_perm+0x53/0x1a0 [ 134.842064] inet_recvmsg+0x51/0xc0 [ 134.842066] sock_recvmsg+0x43/0x50 [ 134.842070] SYSC_recvfrom+0xe4/0x160 [ 134.842072] ? __schedule+0x3de/0x8b0 [ 134.842075] ? ktime_get_ts64+0x4c/0xf0 [ 134.842079] SyS_recvfrom+0xe/0x10 [ 134.842082] do_syscall_64+0x73/0x130 [ 134.842086] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 134.842086] RIP: 0033:0x7fe331f5a81d [ 134.842088] RSP: 002b:00007ffe8da98398 EFLAGS: 00000246 ORIG_RAX: 000000000000002d [ 134.842090] RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 00007fe331f5a81d [ 134.842094] RDX: 00000000000003fb RSI: 0000000001e00874 RDI: 0000000000000003 [ 134.842095] RBP: 00007fe32f642c70 R08: 0000000000000000 R09: 0000000000000000 [ 134.842097] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe332347698 [ 134.842099] R13: 0000000001b7e0a0 R14: 0000000001e00874 R15: 0000000000000000 [ 134.842103] Code: 24 fd ff ff e9 cc fe ff ff 48 89 d8 41 8b 8c 24 10 05 00 00 44 8b 45 80 48 c7 c7 08 bd 59 8b 48 89 85 68 ff ff ff e8 b3 c4 7d ff <0f> 0b 48 8b 85 68 ff ff ff e9 e9 fe ff ff 41 8b 8c 24 10 05 00 [ 134.842126] ---[ end trace b7138fc08c83147f ]--- [ 134.842144] general protection fault: 0000 [#1] SMP PTI [ 134.842145] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi [ 134.842161] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic #37~16.04.1-Ubuntu [ 134.842162] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 134.842164] RIP: 0010:tcp_close+0x2c6/0x440 [ 134.842165] RSP: 0018:ffffa6630422bde8 EFLAGS: 00010202 [ 134.842167] RAX: 0000000000000000 RBX: ffff99760dee3000 RCX: 0000000180400034 [ 134.842168] RDX: 5c4afd407207a6c4 RSI: ffffe868495bd300 RDI: ffff997616f4f200 [ 134.842169] RBP: ffffa6630422be08 R08: 0000000016f4d401 R09: 0000000180400034 [ 134.842169] R10: ffffa6630422bd98 R11: 0000000000000000 R12: 000000000000600c [ 134.842170] R13: 0000000000000000 R14: ffff99760dee30c8 R15: ffff9975bd44fe00 [ 134.842171] FS: 00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000 [ 134.842173] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 134.842174] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0 [ 134.842177] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 134.842178] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 134.842179] Call Trace: [ 134.842181] inet_release+0x42/0x70 [ 134.842183] __sock_release+0x42/0xb0 [ 134.842184] sock_close+0x15/0x20 [ 134.842187] __fput+0xea/0x220 [ 134.842189] ____fput+0xe/0x10 [ 134.842191] task_work_run+0x8a/0xb0 [ 134.842193] exit_to_usermode_loop+0xc4/0xd0 [ 134.842195] do_syscall_64+0xf4/0x130 [ 134.842197] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 134.842197] RIP: 0033:0x7fe331f5a560 [ 134.842198] RSP: 002b:00007ffe8da982e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ 134.842200] RAX: 0000000000000000 RBX: 00007fe32f642c70 RCX: 00007fe331f5a560 [ 134.842201] RDX: 00000000008f5320 RSI: 0000000001cd4b50 RDI: 0000000000000003 [ 134.842202] RBP: 00007fe32f6500f8 R08: 000000000000003c R09: 00000000009343c0 [ 134.842203] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe32f6500d0 [ 134.842204] R13: 00000000008f5320 R14: 00000000008f5320 R15: 0000000001cd4770 [ 134.842205] Code: c8 00 00 00 45 31 e4 49 39 fe 75 4d eb 50 83 ab d8 00 00 00 01 48 8b 17 48 8b 47 08 48 c7 07 00 00 00 00 48 c7 47 08 00 00 00 00 <48> 89 42 08 48 89 10 0f b6 57 34 8b 47 2c 2b 47 28 83 e2 01 80 [ 134.842226] RIP: tcp_close+0x2c6/0x440 RSP: ffffa6630422bde8 [ 134.842227] ---[ end trace b7138fc08c831480 ]--- The proposed patch eliminates a potential racing condition. Before, usb_submit_urb was called and _after_ that, the skb was attached (dev->tx_skb). So, on a callback it was possible, however unlikely that the skb was freed before it was set. That way (because dev->tx_skb was not set to NULL after it was freed), it could happen that a skb from a earlier transmission was freed a second time (and the skb we should have freed did not get freed at all) Now we free the skb directly in ipheth_tx(). It is not passed to the callback anymore, eliminating the posibility of a double free of the same skb. Depending on the retval of usb_submit_urb() we use dev_kfree_skb_any() respectively dev_consume_skb_any() to free the skb. Signed-off-by:
Oliver Zweigle <Oliver.Zweigle@faro.com> Signed-off-by:
Bernd Eckstein <3ernd.Eckstein@gmail.com> Signed-off-by:
-
Julian Wiedmann authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit 9a764c1e ] The response for a SNMP request can consist of multiple parts, which the cmd callback stages into a kernel buffer until all parts have been received. If the callback detects that the staging buffer provides insufficient space, it bails out with error. This processing is buggy for the first part of the response - while it initially checks for a length of 'data_len', it later copies an additional amount of 'offsetof(struct qeth_snmp_cmd, data)' bytes. Fix the calculation of 'data_len' for the first part of the response. This also nicely cleans up the memcpy code. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Pan Bian authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit cfc43519 ] skb is freed via dev_kfree_skb_any, however, skb->len is read then. This may result in a use-after-free bug. Fixes: e6161d64 ("rapidio/rionet: rework driver initialization and removal") Signed-off-by:
-
Sasha Levin authored
BugLink: https://bugs.launchpad.net/bugs/1811077 This reverts commit 3fdd3464 which was upstream commit 4ec7cece. From Dietmar May's report on the stable mailing list (https://www.spinics.net/lists/stable/msg272201.html): > I've run into some problems which appear due to (a) recent patch(es) on > the wlcore wifi driver. > > 4.4.160 - commit 3fdd3464 > 4.9.131 - commit afeeecc7 > > Earlier versions (4.9.130 and 4.4.159 - tested back to 4.4.49) do not > exhibit this problem. It is still present in 4.9.141. > > master as of 4.20.0-rc4 does not exhibit this problem. > > Basically, during client association when in AP mode (running hostapd), > handshake may or may not complete following a noticeable delay. If > successful, then the driver fails consistently in warn_slowpath_null > during disassociation. If unsuccessful, the wifi client attempts multiple > times, sometimes failing repeatedly. I've had clients unable to connect > for 3-5 minutes during testing, with the syslog filled with dozens of > backtraces. syslog details are below. > > I'm working on an embedded device with a TI 3352 ARM processor and a > murata wl1271 module in sdio mode. We're running a fully patched ubuntu > 18.04 ARM build, with a kernel built from kernel.org's stable/linux repo <https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-4.9.y&id=afeeecc764436f31d4447575bb9007732333818c>. > Relevant parts of the kernel config are included below. > > The commit message states: > > > /I've only seen this few times with the runtime PM patches enabled so > > this one is probably not needed before that. This seems to work > > currently based on the current PM implementation timer. Let's apply > > this separately though in case others are hitting this issue./ > We're not doing anything explicit with power management. The device is an > IoT edge gateway with battery backup, normally running on wall power. The > battery is currently used solely to shut down the system cleanly to avoid > filesystem corruption. > > The device tree is configured to keep power in suspend; but the device > should never suspend, so in our case, there is no need to call > wl1271_ps_elp_wakeup() or wl1271_ps_elp_sleep(), as occurs in the patch. Signed-off-by:
-
Matthias Schwarzott authored
BugLink: https://bugs.launchpad.net/bugs/1811077 [ Upstream commit 910b0797 ] Fix bug by moving the i2c_unregister_device calls after deregistration of dvb frontend. The new style i2c drivers already destroys the frontend object at i2c_unregister_device time. When the dvb frontend is unregistered afterwards it leads to this oops: [ 6058.866459] BUG: unable to handle kernel NULL pointer dereference at 00000000000001f8 [ 6058.866578] IP: dvb_frontend_stop+0x30/0xd0 [dvb_core] [ 6058.866644] PGD 0 [ 6058.866646] P4D 0 [ 6058.866726] Oops: 0000 [#1] SMP [ 6058.866768] Modules linked in: rc_pinnacle_pctv_hd(O) em28xx_rc(O) si2157(O) si2168(O) em28xx_dvb(O) em28xx(O) si2165(O) a8293(O) tda10071(O) tea5767(O) tuner(O) cx23885(O) tda18271(O) videobuf2_dvb(O) videobuf2_dma_sg(O) m88ds3103(O) tveeprom(O) cx2341x(O) v4l2_common(O) dvb_core(O) rc_core(O) videobuf2_memops(O) videobuf2_v4l2(O) videobuf2_core(O) videodev(O) media(O) bluetooth ecdh_generic ums_realtek uas rtl8192cu rtl_usb rtl8192c_common rtlwifi usb_storage snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic i2c_mux snd_hda_intel snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core kvm_intel kvm irqbypass [last unloaded: videobuf2_memops] [ 6058.867497] CPU: 2 PID: 7349 Comm: kworker/2:0 Tainted: G W O 4.13.9-gentoo #1 [ 6058.867595] Hardware name: MEDION E2050 2391/H81H3-EM2, BIOS H81EM2W08.308 08/25/2014 [ 6058.867692] Workqueue: usb_hub_wq hub_event [ 6058.867746] task: ffff88011a15e040 task.stack: ffffc90003074000 [ 6058.867825] RIP: 0010:dvb_frontend_stop+0x30/0xd0 [dvb_core] [ 6058.867896] RSP: 0018:ffffc90003077b58 EFLAGS: 00010293 [ 6058.867964] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000010040001f [ 6058.868056] RDX: ffff88011a15e040 RSI: ffffea000464e400 RDI: ffff88001cbe3028 [ 6058.868150] RBP: ffffc90003077b68 R08: ffff880119390380 R09: 000000010040001f [ 6058.868241] R10: ffffc90003077b18 R11: 000000000001e200 R12: ffff88001cbe3028 [ 6058.868330] R13: ffff88001cbe68d0 R14: ffff8800cf734000 R15: ffff8800cf734098 [ 6058.868419] FS: 0000000000000000(0000) GS:ffff88011fb00000(0000) knlGS:0000000000000000 [ 6058.868511] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6058.868578] CR2: 00000000000001f8 CR3: 00000001113c5000 CR4: 00000000001406e0 [ 6058.868662] Call Trace: [ 6058.868705] dvb_unregister_frontend+0x2a/0x80 [dvb_core] [ 6058.868774] em28xx_dvb_fini+0x132/0x220 [em28xx_dvb] [ 6058.868840] em28xx_close_extension+0x34/0x90 [em28xx] [ 6058.868902] em28xx_usb_disconnect+0x4e/0x70 [em28xx] [ 6058.868968] usb_unbind_interface+0x6d/0x260 [ 6058.869025] device_release_driver_internal+0x150/0x210 [ 6058.869094] device_release_driver+0xd/0x10 [ 6058.869150] bus_remove_device+0xe4/0x160 [ 6058.869204] device_del+0x1ce/0x2f0 [ 6058.869253] usb_disable_device+0x99/0x270 [ 6058.869306] usb_disconnect+0x8d/0x260 [ 6058.869359] hub_event+0x93d/0x1520 [ 6058.869408] ? dequeue_task_fair+0xae5/0xd20 [ 6058.869467] process_one_work+0x1d9/0x3e0 [ 6058.869522] worker_thread+0x43/0x3e0 [ 6058.869576] kthread+0x104/0x140 [ 6058.869602] ? trace_event_raw_event_workqueue_work+0x80/0x80 [ 6058.869640] ? kthread_create_on_node+0x40/0x40 [ 6058.869673] ret_from_fork+0x22/0x30 [ 6058.869698] Code: 54 49 89 fc 53 48 8b 9f 18 03 00 00 0f 1f 44 00 00 41 83 bc 24 04 05 00 00 02 74 0c 41 c7 84 24 04 05 00 00 01 00 00 00 0f ae f0 <48> 8b bb f8 01 00 00 48 85 ff 74 5c e8 df 40 f0 e0 48 8b 93 f8 [ 6058.869850] RIP: dvb_frontend_stop+0x30/0xd0 [dvb_core] RSP: ffffc90003077b58 [ 6058.869894] CR2: 00000000000001f8 [ 6058.875880] ---[ end trace 717eecf7193b3fc6 ]--- Signed-off-by:
Matthias Schwarzott <zzam@gentoo.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Wanpeng Li authored
CVE-2018-19407 Reported by syzkaller: BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8 PGD 80000003ec4da067 P4D 80000003ec4da067 PUD 3f7bfa067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 5059 Comm: debug Tainted: G OE 4.19.0-rc5 #16 RIP: 0010:__lock_acquire+0x1a6/0x1990 Call Trace: lock_acquire+0xdb/0x210 _raw_spin_lock+0x38/0x70 kvm_ioapic_scan_entry+0x3e/0x110 [kvm] vcpu_enter_guest+0x167e/0x1910 [kvm] kvm_arch_vcpu_ioctl_run+0x35c/0x610 [kvm] kvm_vcpu_ioctl+0x3e9/0x6d0 [kvm] do_vfs_ioctl+0xa5/0x690 ksys_ioctl+0x6d/0x80 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x83/0x6e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The reason is that the testcase writes hyperv synic HV_X64_MSR_SINT6 msr and triggers scan ioapic logic to load synic vectors into EOI exit bitmap. However, irqchip is not initialized by this simple testcase, ioapic/apic objects should not be accessed. This can be triggered by the following program: #define _GNU_SOURCE #include <endian.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> uint64_t r[3] = {0xffffffffffffffff, 0xffffffffffffffff, 0xffffffffffffffff}; int main(void) { syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); long res = 0; memcpy((void*)0x20000040, "/dev/kvm", 9); res = syscall(__NR_openat, 0xffffffffffffff9c, 0x20000040, 0, 0); if (res != -1) r[0] = res; res = syscall(__NR_ioctl, r[0], 0xae01, 0); if (res != -1) r[1] = res; res = syscall(__NR_ioctl, r[1], 0xae41, 0); if (res != -1) r[2] = res; memcpy( (void*)0x20000080, "\x01\x00\x00\x00\x00\x5b\x61\xbb\x96\x00\x00\x40\x00\x00\x00\x00\x01\x00" "\x08\x00\x00\x00\x00\x00\x0b\x77\xd1\x78\x4d\xd8\x3a\xed\xb1\x5c\x2e\x43" "\xaa\x43\x39\xd6\xff\xf5\xf0\xa8\x98\xf2\x3e\x37\x29\x89\xde\x88\xc6\x33" "\xfc\x2a\xdb\xb7\xe1\x4c\xac\x28\x61\x7b\x9c\xa9\xbc\x0d\xa0\x63\xfe\xfe" "\xe8\x75\xde\xdd\x19\x38\xdc\x34\xf5\xec\x05\xfd\xeb\x5d\xed\x2e\xaf\x22" "\xfa\xab\xb7\xe4\x42\x67\xd0\xaf\x06\x1c\x6a\x35\x67\x10\x55\xcb", 106); syscall(__NR_ioctl, r[2], 0x4008ae89, 0x20000080); syscall(__NR_ioctl, r[2], 0xae80, 0); return 0; } This patch fixes it by bailing out scan ioapic if ioapic is not initialized in kernel. Reported-by:Wei Wu <ww9210@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Wei Wu <ww9210@gmail.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
-
Li Zhijian authored
BugLink: https://bugs.launchpad.net/bugs/1809699 Previously, 'make run_tests -C cpu-hotplug' always PASS since cpu-on-off-test.sh always exits 0 even though the test got some unexpected errors like below: root@debian9:/home/lizhijian/chroot/linux/tools/testing/selftests/cpu-hotplug# make run_tests pid 878's current affinity mask: 1 pid 878's new affinity mask: 1 CPU online/offline summary: Cpus in online state: 0 Cpus in offline state: 0 Limited scope test: one hotplug cpu (leaves cpu in the original state): online to offline to online: cpu 0 ./cpu-on-off-test.sh: line 83: /sys/devices/system/cpu/cpu0/online: Permission denied offline_cpu_expect_success 0: unexpected fail ./cpu-on-off-test.sh: line 78: /sys/devices/system/cpu/cpu0/online: Permission denied online_cpu_expect_success 0: unexpected fail selftests: cpu-on-off-test.sh [PASS] after this patch, the test will exit with failure once it occurs some unexpected behaviors Signed-off-by:
Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> (cherry picked from commit 8fe6e53a) Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
-
Joerg Roedel authored
BugLink: https://launchpad.net/bugs/1810328 When booting into a kexec kernel with intel_iommu=off, and the previous kernel had intel_iommu=on, the IOMMU hardware is still enabled and gets not disabled by the new kernel. This causes the boot to fail because DMA is blocked by the hardware. Disable the IOMMUs when we find it enabled in the kexec kernel and boot with intel_iommu=off. Signed-off-by:
Joerg Roedel <jroedel@suse.de> (backported from commit 161b28aa) [gpiccoli: context adjustment] Signed-off-by:
Guilherme G. Piccoli <gpiccoli@canonical.com> Acked-by:
-
Dmitry Safonov authored
BugLink: https://bugs.launchpad.net/bugs/1791758 As notted by Jiri, tty_ldisc_reinit() shouldn't rely on tty counter. Simplify math by increasing the counter after reinit success. Cc: Jiri Slaby <jslaby@suse.com> Link: lkml.kernel.org/r/<20180829022353.23568-2-dima@arista.com> Suggested-by:
Jiri Slaby <jslaby@suse.com> Reviewed-by:
Jiri Slaby <jslaby@suse.cz> Tested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
-
Dmitry Safonov authored
BugLink: https://bugs.launchpad.net/bugs/1791758 There might be situations where tty_ldisc_lock() has blocked, but there is already IO on tty and it prevents line discipline changes. It might theoretically turn into dead-lock. Basically, provide more priority to pending tty_ldisc_lock() than to servicing reads/writes over tty. User-visible issue was reported by Mikulas where on pa-risc with Debian 5 reboot took either 80 seconds, 3 minutes or 3:25 after proper locking in tty_reopen(). Cc: Jiri Slaby <jslaby@suse.com> Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Dmitry Safonov authored
BugLink: https://bugs.launchpad.net/bugs/1791758 tty_ldisc_reinit() doesn't race with neither tty_ldisc_hangup() nor set_ldisc() nor tty_ldisc_release() as they use tty lock. But it races with anyone who expects line discipline to be the same after hoding read semaphore in tty_ldisc_ref(). We've seen the following crash on v4.9.108 stable: BUG: unable to handle kernel paging request at 0000000000002260 IP: [..] n_tty_receive_buf_common+0x5f/0x86d Workqueue: events_unbound flush_to_ldisc Call Trace: [..] n_tty_receive_buf2 [..] tty_ldisc_receive_buf [..] flush_to_ldisc [..] process_one_work [..] worker_thread [..] kthread [..] ret_from_fork tty_ldisc_reinit() should be called with ldisc_sem hold for writing, which will protect any reader against line discipline changes. Cc: Jiri Slaby <jslaby@suse.com> Cc: stable@vger.kernel.org # b027e229 ("tty: fix data race between tty_init_dev and flush of buf") Reviewed-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
Tycho Andersen <tycho@tycho.ws> Signed-off-by:
-
Dmitry Safonov authored
BugLink: https://bugs.launchpad.net/bugs/1791758 In case of tty_ldisc_reinit() failure, tty->count should be decremented back, otherwise we will never release_tty(). Tetsuo reported that it fixes noisy warnings on tty release like: pts pts4033: tty_release: tty->count(10529) != (#fd's(7) + #kopen's(0)) Fixes: commit 892d1fa7 ("tty: Destroy ldisc instance on hangup") Cc: stable@vger.kernel.org # v4.6+ Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Reviewed-by:
-
Gaurav Kohli authored
BugLink: https://bugs.launchpad.net/bugs/1791758 There can be a race, if receive_buf call comes before tty initialization completes in n_tty_open and tty->disc_data may be NULL. CPU0 CPU1 ---- ---- 000|n_tty_receive_buf_common() n_tty_open() -001|n_tty_receive_buf2() tty_ldisc_open.isra.3() -002|tty_ldisc_receive_buf(inline) tty_ldisc_setup() Using ldisc semaphore lock in tty_init_dev till disc_data initializes completely. Signed-off-by:
Gaurav Kohli <gkohli@codeaurora.org> Reviewed-by:
Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1810967Signed-off-by:
-
Thomas Zimmermann authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit 5478ad10 upstream. If vesafb attaches to the AST device, it configures the framebuffer memory for uncached access by default. When ast.ko later tries to attach itself to the device, it wants to use write-combining on the framebuffer memory, but vesefb's existing configuration for uncached access takes precedence. This results in reduced performance. Removing the framebuffer's configuration before loding the AST driver fixes the problem. Other DRM drivers already contain equivalent code. Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1112963Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Cc: <stable@vger.kernel.org> Tested-by:
Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Tested-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Janosch Frank authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit 1843abd0 upstream. Userspace could have munmapped the area before doing unmapping from the gmap. This would leave us with a valid vmaddr, but an invalid vma from which we would try to zap memory. Let's check before using the vma. Fixes: 1e133ab2 ("s390/mm: split arch/s390/mm/pgtable.c") Signed-off-by:
Janosch Frank <frankja@linux.ibm.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Message-Id: <20180816082432.78828-1-frankja@linux.ibm.com> Signed-off-by:
-
Salvatore Mesoraca authored
BugLink: https://bugs.launchpad.net/bugs/1810967 commit 30aba665 upstream. Disallows open of FIFOs or regular files not owned by the user in world writable sticky directories, unless the owner is the same as that of the directory or the file is opened without the O_CREAT flag. The purpose is to make data spoofing attacks harder. This protection can be turned on and off separately for FIFOs and regular files via sysctl, just like the symlinks/hardlinks protection. This patch is based on Openwall's "HARDEN_FIFO" feature by Solar Designer. This is a brief list of old vulnerabilities that could have been prevented by this feature, some of them even allow for privilege escalation: CVE-2000-1134 CVE-2007-3852 CVE-2008-0525 CVE-2009-0416 CVE-2011-4834 CVE-2015-1838 CVE-2015-7442 CVE-2016-7489 This list is not meant to be complete. It's difficult to track down all vulnerabilities of this kind because they were often reported without any mention of this particular attack vector. In fact, before hardlinks/symlinks restrictions, fifos/regular files weren't the favorite vehicle to exploit them. [s.mesoraca16@gmail.com: fix bug reported by Dan Carpenter] Link: https://lkml.kernel.org/r/20180426081456.GA7060@mwanda Link: http://lkml.kernel.org/r/1524829819-11275-1-git-send-email-s.mesoraca16@gmail.com [keescook@chromium.org: drop pr_warn_ratelimited() in favor of audit changes in the future] [keescook@chromium.org: adjust commit subjet] Link: http://lkml.kernel.org/r/20180416175918.GA13494@beastSigned-off-by:
Salvatore Mesoraca <s.mesoraca16@gmail.com> Signed-off-by:
Solar Designer <solar@openwall.com> Suggested-by:
-
