- 03 Dec, 2023 2 commits
-
-
Krzysztof Kozlowski authored
The SDX65 GCC clock controller expects two required clocks: pcie_pipe_clk and usb3_phy_wrapper_gcc_usb30_pipe_clk. The first one is provided by existing phy node, but second is not yet implemented. qcom-sdx65-mtp.dtb: clock-controller@100000: clocks: [[11, 0], [11, 1], [12]] is too short qcom-sdx65-mtp.dtb: clock-controller@100000: clock-names: ['bi_tcxo', 'bi_tcxo_ao', 'sleep_clk'] is too short Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230924183103.49487-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
Bjorn Andersson <andersson@kernel.org>
-
Krzysztof Kozlowski authored
Qualcomm PCIe endpoint bindings expect phy-names to be "pciephy": arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dtb: pcie-ep@1c00000: phy-names:0: 'pciephy' was expected Fixes: 9c0bb384 ("ARM: dts: qcom: sdx65: Add support for PCIe EP") Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230924183103.49487-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
- 14 Nov, 2023 37 commits
-
-
Dmitry Baryshkov authored
Device tree node names should not use vendor prefix, they contain a generic name of the device. Drop the qcom, prefix from the SSBI node name. Signed-off-by:
-
Dmitry Baryshkov authored
Device tree node names should not use vendor prefix, they contain a generic name of the device. Drop the qcom, prefix from the SSBI node name. Signed-off-by:
-
Dmitry Baryshkov authored
Use generic `adc-channel@N' node names for board-specific ADC channels (routed to MPP pins) to follow the schema. Reviewed-by:
-
Dmitry Baryshkov authored
Since keypad is used only by some devices, disable it by default and enable explicitly. Reviewed-by:
-
Dmitry Baryshkov authored
The vph-pwr and boost regulators (even if they are unified by design) are not a property of SoC, so move them to board files. Reviewed-by:
-
Dmitry Baryshkov authored
The set of regulators available over the RPM requests is not a property of the SoC. The only msm8960 board file (qcom-msm8960-cdp) also defines this node together with the compatible string. Drop the useless device node. Reviewed-by:
-
Dmitry Baryshkov authored
The set of regulators available over the RPM requests is not a property of the SoC. Move them to board files. Reviewed-by:
-
Dmitry Baryshkov authored
The set of regulators available over the RPM requests is not a property of the SoC. Move them to board files. Reviewed-by:
-
Dmitry Baryshkov authored
The set of regulators available over the RPM requests is not a property of the SoC. Move them to board files. Reviewed-by:
-
Dmitry Baryshkov authored
Merge interrups and interrupt-parent properties into a single interrupts-extended property. Suggested-by:
-
Dmitry Baryshkov authored
Merge interrups and interrupt-parent properties into a single interrupts-extended property. Suggested-by:
-
Dmitry Baryshkov authored
Merge interrups and interrupt-parent properties into a single interrupts-extended property. Suggested-by:
-
Dmitry Baryshkov authored
Use symbolic names for IRQ flags instead of using the numeric values. Reviewed-by:
-
Dmitry Baryshkov authored
Move reg property to come after compatible. Reviewed-by:
-
Dmitry Baryshkov authored
Move reg property to come after compatible. Reviewed-by:
-
Dmitry Baryshkov authored
Move pm8921 device nodes to follow the alphanumberic sorting order. Reviewed-by:
-
Dmitry Baryshkov authored
Move pm8058 device nodes to follow the alphanumberic sorting order. Reviewed-by:
-
Dmitry Baryshkov authored
The PMIC is not a part of the SoC, so move PMIC to a separate file and include it from the board files. Suggested-by:
-
Dmitry Baryshkov authored
The PMIC is not a part of the SoC, so move PMIC to a separate file and include it from the board files. Suggested-by:
Neil Armstrong <neil.armstrong@linaro.org> Acked-by:
-
Dmitry Baryshkov authored
The PMICs are not a part of the SoC, so move PMICs to separate files and include them from the board files. Suggested-by:
-
Dmitry Baryshkov authored
The PMIC is not a part of the SoC, so move PMIC to a separate file and include it from the board files. Suggested-by:
-
Dmitry Baryshkov authored
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Reviewed-by:
-
Dmitry Baryshkov authored
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Acked-by:
-
Dmitry Baryshkov authored
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Acked-by:
-
Dmitry Baryshkov authored
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Reviewed-by:
-
Dmitry Baryshkov authored
Change PM8921 node labels to start with pm8921_ prefix, following other Qualcomm PMIC device nodes. Reviewed-by:
-
Dmitry Baryshkov authored
Change PM8058 node labels to start with pm8058_ prefix, following other Qualcomm PMIC device nodes. Reviewed-by:
-
Dmitry Baryshkov authored
Change PM8018 node labels to start with pm8018_ prefix, following other Qualcomm PMIC device nodes. Reviewed-by:
-
Dmitry Baryshkov authored
Change PM8921 node labels to start with pm8921_ prefix, following other Qualcomm PMIC device nodes. Reviewed-by:
-
Dmitry Baryshkov authored
As the vendor DTS files were moved to per-vendor subdirs, there no need to use common prefixes. Drop the `qcom-' prefix from PMIC dtsi file. This makes 32-bit qcom/ dts files closer to arm64 ones. Reviewed-by:
-
Dmitry Baryshkov authored
Group file inclusion to follow contemporary practice. Reviewed-by:
-
Dmitry Baryshkov authored
Move sdcc1 device node to follow the alphanumberic sorting order. Reviewed-by:
-
Dmitry Baryshkov authored
Directly use pm8058_keypad to declare keypad properties instead of referencing pm8058 top-level node. Reviewed-by:
-
Dmitry Baryshkov authored
To simplify MSM8960 CDP board file, add label to PMIC keypad node. Reviewed-by:
-
Dmitry Baryshkov authored
The XOADC is present at the address 0x197 rather than just 197. It doesn't change a lot (since the driver hardcodes all register addresses), but the DT should present correct address anyway. Fixes: c4b70883 ("ARM: dts: add XOADC and IIO HWMON to APQ8064") Reviewed-by:
-
Dmitry Baryshkov authored
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by:
-
Dmitry Baryshkov authored
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by:
-
- 13 Nov, 2023 1 commit
-
-
Linus Torvalds authored
-
