- 25 Feb, 2018 32 commits
-
-
Tony Lindgren authored
[ Upstream commit cf87634c ] There's been a reproducable USB OHCI/EHCI cpuidle related hang on omap4 for a while that happens after about 20 - 40 minutes on an idle system with some data feeding device being connected, like a USB GPS device or a cellular modem. This issue happens in cpuidle states C2 and C3 and does not happen if cpuidle is limited to C1 state only. The symptoms are that the whole system hangs and never wakes up from idle, and if a watchdog is configured the system reboots after a while. Turns out that OHCI/EHCI devices on omap4 are trying to use the GIC interrupt controller directly as a parent instead of the WUGEN. We need to pass the interrupts through WUGEN to GIC to provide the wakeup events for the processor. Let's fix the issue by removing the gic interrupt-parent and use the default interrupt-parent wakeupgen instead. Note that omap5.dtsi had this already fixes earlier by commit 7136d457 ("ARM: omap: convert wakeupgen to stacked domains") but we somehow missed omap4 at that point. Fixes: 7136d457 ("ARM: omap: convert wakeupgen to stacked domains") Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Keerthy authored
[ Upstream commit b6d6af72 ] Referring TRM Am335X series: http://www.ti.com/lit/ug/spruh73p/spruh73p.pdf The LastPowerStateEntered bitfield is present only for PM_CEFUSE domain. This is not present in any of the other power domains. Hence remove the generic am33xx_pwrdm_read_prev_pwrst hook which wrongly reads the reserved bit fields for all the other power domains. Reading the reserved bits leads to wrongly interpreting the low power transitions for various power domains that do not have the LastPowerStateEntered field. The pm debug counters values are wrong currently as we are incrementing them based on the reserved bits. Signed-off-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit d09220a8 ] With the CMA changes from Joonsoo Kim <iamjoonsoo.kim@lge.com>, it was noticed that n900 stopped booting. After investigating it turned out that n900 save_secure_ram_context does some whacky virtual to physical address translation for the SRAM data address. As we now only have minimal parts of omap3 idle code copied to SRAM, running save_secure_ram_context() in SRAM is not needed. It only gets called on PM init. And it seems there's no need to ever call this from SRAM idle code. So let's just keep save_secure_ram_context() in DDR, and pass it the physical address of the parameters. We can do everything else in omap-secure.c like we already do for other secure code. And since we don't have any documentation, I still have no clue what the values for 0, 1 and 1 for the parameters might be. If somebody has figured it out, please do send a patch to add some comments. Debugged-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit c9d24f78 ] PHY drivers can use ULPI interfaces when CONFIG_USB (which is host side support) is not enabled, so also build drivers/usb/ when CONFIG_USB_SUPPORT is enabled so that drivers/usb/common/ is built. ERROR: "ulpi_unregister_driver" [drivers/phy/ti/phy-tusb1210.ko] undefined! ERROR: "__ulpi_register_driver" [drivers/phy/ti/phy-tusb1210.ko] undefined! ERROR: "ulpi_read" [drivers/phy/ti/phy-tusb1210.ko] undefined! ERROR: "ulpi_write" [drivers/phy/ti/phy-tusb1210.ko] undefined! ERROR: "ulpi_unregister_driver" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined! ERROR: "__ulpi_register_driver" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined! ERROR: "ulpi_write" [drivers/phy/qualcomm/phy-qcom-usb-hs.ko] undefined! Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Shuah Khan authored
commit 009f41ae upstream. Keep usbip_device sockfd state in sync with tcp_socket. When tcp_socket is reset to null, reset sockfd to -1 to keep it in sync. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alexandru Ardelean authored
commit e31b617d upstream. The external clock frequency was set only when selecting the internal clock, which is fixed at 4.9152 Mhz. This is incorrect, since it should be set when any of the external clock or crystal settings is selected. Added range validation for the external (crystal/clock) frequency setting. Valid values are between 2.4576 and 5.12 Mhz. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Eric Biggers authored
commit f8898267 upstream. If the kzalloc() in binder_get_thread() fails, binder_poll() dereferences the resulting NULL pointer. Fix it by returning POLLERR if the memory allocation failed. This bug was found by syzkaller using fault injection. Reported-by:
syzbot <syzkaller@googlegroups.com> Fixes: 457b9a6f ("Staging: android: add binder driver") Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Ben Hutchings authored
commit ce8a3a9e upstream. ashmem_pin_unpin() reads asma->file and asma->size before taking the ashmem_mutex, so it can race with other operations that modify them. Build-tested only. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Paolo Abeni authored
commit dfec0914 upstream. After commit 3f34cfae ("netfilter: on sockopt() acquire sock lock only in the required scope"), the caller of nf_{get/set}sockopt() must not hold any lock, but, in such changeset, I forgot to cope with DECnet. This commit addresses the issue moving the nf call outside the lock, in the dn_{get,set}sockopt() with the same schema currently used by ipv4 and ipv6. Also moves the unhandled sockopts of the end of the main switch statements, to improve code readability. Reported-by:
Petr Vandrovec <petr@vandrovec.name> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198791#c2 Fixes: 3f34cfae ("netfilter: on sockopt() acquire sock lock only in the required scope") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dave Jones authored
commit 9b246841 upstream. commit 911362c7 ("net: add dst_cache support") added a new kconfig option that gets selected by other networking options. It seems the intent wasn't to offer this as a user-selectable option given the lack of help text, so this patch converts it to a silent option. Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Arnd Bergmann authored
commit acbf76ee upstream. dtc complains about the lack of #coolin-cells properties for the CPU nodes that are referred to as "cooling-device": arch/arm64/boot/dts/mediatek/mt8173-evb.dtb: Warning (cooling_device_property): Missing property '#cooling-cells' in node /cpus/cpu@0 or bad phandle (referred from /thermal-zones/cpu_thermal/cooling-maps/map@0:cooling-device[0]) arch/arm64/boot/dts/mediatek/mt8173-evb.dtb: Warning (cooling_device_property): Missing property '#cooling-cells' in node /cpus/cpu@100 or bad phandle (referred from /thermal-zones/cpu_thermal/cooling-maps/map@1:cooling-device[0]) Apparently this property must be '<2>' to match the binding. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by:
Olof Johansson <olof@lixom.net> [arnd: backported to 4.15] Signed-off-by:
-
Arnd Bergmann authored
commit c1530ac5 upstream. Kbuild complains about the lack of a license tag in this driver: WARNING: modpost: missing MODULE_LICENSE() in drivers/video/fbdev/mmp/mmp_disp.o This adds the license, author and description tags. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Arnd Bergmann authored
commit 1783c9d7 upstream. This adds MODULE_LICENSE/AUTHOR/DESCRIPTION tags to the ux500 platform drivers, to avoid these build warnings: WARNING: modpost: missing MODULE_LICENSE() in sound/soc/ux500/snd-soc-ux500-plat-dma.o WARNING: modpost: missing MODULE_LICENSE() in sound/soc/ux500/snd-soc-ux500-mach-mop500.o The company no longer exists, so the email addresses of the authors don't work any more, but I've added them anyway for consistency. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Willem de Bruijn authored
commit 8d74e9f8 upstream. skb_warn_bad_offload warns when packets enter the GSO stack that require skb_checksum_help or vice versa. Do not warn on arbitrary bad packets. Packet sockets can craft many. Syzkaller was able to demonstrate another one with eth_type games. In particular, suppress the warning when segmentation returns an error, which is for reasons other than checksum offload. See also commit 36c92474 ("net: WARN if skb_checksum_help() is called on skb requiring segmentation") for context on this warning. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Cong Wang authored
commit 7dc68e98 upstream. rateest_hash is supposed to be protected by xt_rateest_mutex, and, as suggested by Eric, lookup and insert should be atomic, so we should acquire the xt_rateest_mutex once for both. So introduce a non-locking helper for internal use and keep the locking one for external. Reported-by: <syzbot+5cb189720978275e4c75@syzkaller.appspotmail.com> Fixes: 5859034d ("[NETFILTER]: x_tables: add RATEEST target") Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Paolo Abeni authored
commit 3f34cfae upstream. Syzbot reported several deadlocks in the netfilter area caused by rtnl lock and socket lock being acquired with a different order on different code paths, leading to backtraces like the following one: ====================================================== WARNING: possible circular locking dependency detected 4.15.0-rc9+ #212 Not tainted ------------------------------------------------------ syzkaller041579/3682 is trying to acquire lock: (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>] lock_sock include/net/sock.h:1463 [inline] (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>] do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167 but task is already holding lock: (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}: __mutex_lock_common kernel/locking/mutex.c:756 [inline] __mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 register_netdevice_notifier+0xad/0x860 net/core/dev.c:1607 tee_tg_check+0x1a0/0x280 net/netfilter/xt_TEE.c:106 xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:845 check_target net/ipv6/netfilter/ip6_tables.c:538 [inline] find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:580 translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:749 do_replace net/ipv6/netfilter/ip6_tables.c:1165 [inline] do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1691 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115 ipv6_setsockopt+0x115/0x150 net/ipv6/ipv6_sockglue.c:928 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 entry_SYSCALL_64_fastpath+0x29/0xa0 -> #0 (sk_lock-AF_INET6){+.+.}: lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3914 lock_sock_nested+0xc2/0x110 net/core/sock.c:2780 lock_sock include/net/sock.h:1463 [inline] do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167 ipv6_setsockopt+0xd7/0x150 net/ipv6/ipv6_sockglue.c:922 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 entry_SYSCALL_64_fastpath+0x29/0xa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(sk_lock-AF_INET6); lock(rtnl_mutex); lock(sk_lock-AF_INET6); *** DEADLOCK *** 1 lock held by syzkaller041579/3682: #0: (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 The problem, as Florian noted, is that nf_setsockopt() is always called with the socket held, even if the lock itself is required only for very tight scopes and only for some operation. This patch addresses the issues moving the lock_sock() call only where really needed, namely in ipv*_getorigdst(), so that nf_setsockopt() does not need anymore to acquire both locks. Fixes: 22265a5c ("netfilter: xt_TEE: resolve oif using netdevice notifiers") Reported-by: syzbot+a4c2dc980ac1af699b36@syzkaller.appspotmail.com Suggested-by:
-
Dmitry Vyukov authored
commit 1a38956c upstream. Commit 136e92bb switched local_nodes from an array to a bitmask but did not add proper bounds checks. As the result clusterip_config_init_nodelist() can both over-read ipt_clusterip_tgt_info.local_nodes and over-write clusterip_config.local_nodes. Add bounds checks for both. Fixes: 136e92bb ("[NETFILTER] CLUSTERIP: use a bitmap to store node responsibility data") Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Reported-by:
-
Eric Dumazet authored
commit da17c73b upstream. It looks like syzbot found its way into netfilter territory. Issue here is that @name comes from user space and might not be null terminated. Out-of-bound reads happen, KASAN is not happy. v2 added similar fix for xt_request_find_target(), as Florian advised. Signed-off-by:
-
Dmitry Vyukov authored
commit 889c604f upstream. syzkaller triggered OOM kills by passing ipt_replace.size = -1 to IPT_SO_SET_REPLACE. The root cause is that SMP_ALIGN() in xt_alloc_table_info() causes int overflow and the size check passes when it should not. SMP_ALIGN() is no longer needed leftover. Remove SMP_ALIGN() call in xt_alloc_table_info(). Reported-by: syzbot+4396883fa8c4f64e0175@syzkaller.appspotmail.com Signed-off-by:
-
Wanpeng Li authored
commit efdab992 upstream. syzkaller reported: WARNING: CPU: 0 PID: 12927 at arch/x86/kernel/traps.c:780 do_debug+0x222/0x250 CPU: 0 PID: 12927 Comm: syz-executor Tainted: G OE 4.15.0-rc2+ #16 RIP: 0010:do_debug+0x222/0x250 Call Trace: <#DB> debug+0x3e/0x70 RIP: 0010:copy_user_enhanced_fast_string+0x10/0x20 </#DB> _copy_from_user+0x5b/0x90 SyS_timer_create+0x33/0x80 entry_SYSCALL_64_fastpath+0x23/0x9a The testcase sets a watchpoint (with perf_event_open) on a buffer that is passed to timer_create() as the struct sigevent argument. In timer_create(), copy_from_user()'s rep movsb triggers the BP. The testcase also sets the debug registers for the guest. However, KVM only restores host debug registers when the host has active watchpoints, which triggers a race condition when running the testcase with multiple threads. The guest's DR6.BS bit can escape to the host before another thread invokes timer_create(), and do_debug() complains. The fix is to respect do_debug()'s dr6 invariant when leaving KVM. Reported-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit d8c7fe9f upstream. Using %rbp as a temporary register breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. In twofish-3way, we can't simply replace %rbp with another register because there are none available. Instead, we use the stack to hold the values that %rbp, %r11, and %r12 were holding previously. Each of these values represents the half of the output from the previous Feistel round that is being passed on unchanged to the following round. They are only used once per round, when they are exchanged with %rax, %rbx, and %rcx. As a result, we free up 3 registers (one per block) and can reassign them so that %rbp is not used, and additionally %r14 and %r15 are not used so they do not need to be saved/restored. There may be a small overhead caused by replacing 'xchg REG, REG' with the needed sequence 'mov MEM, REG; mov REG, MEM; mov REG, REG' once per round. But, counterintuitively, when I tested "ctr-twofish-3way" on a Haswell processor, the new version was actually about 2% faster. (Perhaps 'xchg' is not as well optimized as plain moves.) Reported-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Paul Moore authored
commit 4b14752e upstream. We can't do anything reasonable in security_bounded_transition() if we don't have a policy loaded, and in fact we could run into problems with some of the code inside expecting a policy. Fix these problems like we do many others in security/selinux/ss/services.c by checking to see if the policy is loaded (ss_initialized) and returning quickly if it isn't. Reported-by:
syzbot <syzkaller-bugs@googlegroups.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Reviewed-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Paul Moore authored
commit ef28df55 upstream. The syzbot/syzkaller automated tests found a problem in security_context_to_sid_core() during early boot (before we load the SELinux policy) where we could potentially feed context strings without NUL terminators into the strcmp() function. We already guard against this during normal operation (after the SELinux policy has been loaded) by making a copy of the context strings and explicitly adding a NUL terminator to the end. The patch extends this protection to the early boot case (no loaded policy) by moving the context copy earlier in security_context_to_sid_core(). Reported-by:
William Roberts <william.c.roberts@intel.com> Signed-off-by:
-
David Howells authored
commit f3515741 upstream. Provide a function, kmemdup_nul(), that will create a NUL-terminated string from an unterminated character array where the length is known in advance. This is better than kstrndup() in situations where we already know the string length as the strnlen() in kstrndup() is superfluous. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Chris Wilson authored
commit d18d1a5a upstream. To acquire all modeset locks requires a ww_ctx to be allocated. As this is the legacy path and the allocation small, to reduce the changes required (and complex untested error handling) to the legacy drivers, we simply assume that the allocation succeeds. At present, it relies on the too-small-to-fail rule, but syzbot found that by injecting a failure here we would hit the WARN. Document that this allocation must succeed with __GFP_NOFAIL. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171031115535.15166-1-chris@chris-wilson.co.ukSigned-off-by:
-
Jens Axboe authored
commit a6da0024 upstream. We need to ensure that tracepoints are registered and unregistered with the users of them. The existing atomic count isn't enough for that. Add a lock around the tracepoints, so we serialize access to them. This fixes cases where we have multiple users setting up and tearing down tracepoints, like this: CPU: 0 PID: 2995 Comm: syzkaller857118 Not tainted 4.14.0-rc5-next-20171018+ #36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1c4/0x1e0 kernel/panic.c:546 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177 do_trap_no_signal arch/x86/kernel/traps.c:211 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:260 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:tracepoint_add_func kernel/tracepoint.c:210 [inline] RIP: 0010:tracepoint_probe_register_prio+0x397/0x9a0 kernel/tracepoint.c:283 RSP: 0018:ffff8801d1d1f6c0 EFLAGS: 00010293 RAX: ffff8801d22e8540 RBX: 00000000ffffffef RCX: ffffffff81710f07 RDX: 0000000000000000 RSI: ffffffff85b679c0 RDI: ffff8801d5f19818 RBP: ffff8801d1d1f7c8 R08: ffffffff81710c10 R09: 0000000000000004 R10: ffff8801d1d1f6b0 R11: 0000000000000003 R12: ffffffff817597f0 R13: 0000000000000000 R14: 00000000ffffffff R15: ffff8801d1d1f7a0 tracepoint_probe_register+0x2a/0x40 kernel/tracepoint.c:304 register_trace_block_rq_insert include/trace/events/block.h:191 [inline] blk_register_tracepoints+0x1e/0x2f0 kernel/trace/blktrace.c:1043 do_blk_trace_setup+0xa10/0xcf0 kernel/trace/blktrace.c:542 blk_trace_setup+0xbd/0x180 kernel/trace/blktrace.c:564 sg_ioctl+0xc71/0x2d90 drivers/scsi/sg.c:1089 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x444339 RSP: 002b:00007ffe05bb5b18 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006d66c0 RCX: 0000000000444339 RDX: 000000002084cf90 RSI: 00000000c0481273 RDI: 0000000000000009 RBP: 0000000000000082 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffffff R13: 00000000c0481273 R14: 0000000000000000 R15: 0000000000000000 since we can now run these in parallel. Ensure that the exported helpers for doing this are grabbing the queue trace mutex. Reported-by:
Steven Rostedt <rostedt@goodmis.org> Tested-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Cong Wang authored
commit 6a53b759 upstream. syzbot reported a kernel warning in xfrm_state_fini(), which indicates that we have entries left in the list net->xfrm.state_all whose proto is zero. And xfrm_id_proto_match() doesn't consider them as a match with IPSEC_PROTO_ANY in this case. Proto with value 0 is probably not a valid value, at least verify_newsa_info() doesn't consider it valid either. This patch fixes it by checking the proto value in validate_tmpl() and rejecting invalid ones, like what iproute2 does in xfrm_xfrmproto_getbyname(). Reported-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Steffen Klassert authored
commit ddc47e44 upstream. When we do tunnel or beet mode, we pass saddr and daddr from the template to xfrm_state_find(), this is ok. On transport mode, we pass the addresses from the flowi, assuming that the IP addresses (and address family) don't change during transformation. This assumption is wrong in the IPv4 mapped IPv6 case, packet is IPv4 and template is IPv6. Fix this by catching address family missmatches of the policy and the flow already before we do the lookup. Reported-by:
-
Tetsuo Handa authored
commit bb422a73 upstream. Syzbot caught an oops at unregister_shrinker() because combination of commit 1d3d4437 ("vmscan: per-node deferred work") and fault injection made register_shrinker() fail and the caller of register_shrinker() did not check for failure. ---------- [ 554.881422] FAULT_INJECTION: forcing a failure. [ 554.881422] name failslab, interval 1, probability 0, space 0, times 0 [ 554.881438] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82 [ 554.881443] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 554.881445] Call Trace: [ 554.881459] dump_stack+0x194/0x257 [ 554.881474] ? arch_local_irq_restore+0x53/0x53 [ 554.881486] ? find_held_lock+0x35/0x1d0 [ 554.881507] should_fail+0x8c0/0xa40 [ 554.881522] ? fault_create_debugfs_attr+0x1f0/0x1f0 [ 554.881537] ? check_noncircular+0x20/0x20 [ 554.881546] ? find_next_zero_bit+0x2c/0x40 [ 554.881560] ? ida_get_new_above+0x421/0x9d0 [ 554.881577] ? find_held_lock+0x35/0x1d0 [ 554.881594] ? __lock_is_held+0xb6/0x140 [ 554.881628] ? check_same_owner+0x320/0x320 [ 554.881634] ? lock_downgrade+0x990/0x990 [ 554.881649] ? find_held_lock+0x35/0x1d0 [ 554.881672] should_failslab+0xec/0x120 [ 554.881684] __kmalloc+0x63/0x760 [ 554.881692] ? lock_downgrade+0x990/0x990 [ 554.881712] ? register_shrinker+0x10e/0x2d0 [ 554.881721] ? trace_event_raw_event_module_request+0x320/0x320 [ 554.881737] register_shrinker+0x10e/0x2d0 [ 554.881747] ? prepare_kswapd_sleep+0x1f0/0x1f0 [ 554.881755] ? _down_write_nest_lock+0x120/0x120 [ 554.881765] ? memcpy+0x45/0x50 [ 554.881785] sget_userns+0xbcd/0xe20 (...snipped...) [ 554.898693] kasan: CONFIG_KASAN_INLINE enabled [ 554.898724] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 554.898732] general protection fault: 0000 [#1] SMP KASAN [ 554.898737] Dumping ftrace buffer: [ 554.898741] (ftrace buffer empty) [ 554.898743] Modules linked in: [ 554.898752] CPU: 1 PID: 13231 Comm: syz-executor1 Not tainted 4.14.0-rc8+ #82 [ 554.898755] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ 554.898760] task: ffff8801d1dbe5c0 task.stack: ffff8801c9e38000 [ 554.898772] RIP: 0010:__list_del_entry_valid+0x7e/0x150 [ 554.898775] RSP: 0018:ffff8801c9e3f108 EFLAGS: 00010246 [ 554.898780] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 554.898784] RDX: 0000000000000000 RSI: ffff8801c53c6f98 RDI: ffff8801c53c6fa0 [ 554.898788] RBP: ffff8801c9e3f120 R08: 1ffff100393c7d55 R09: 0000000000000004 [ 554.898791] R10: ffff8801c9e3ef70 R11: 0000000000000000 R12: 0000000000000000 [ 554.898795] R13: dffffc0000000000 R14: 1ffff100393c7e45 R15: ffff8801c53c6f98 [ 554.898800] FS: 0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 [ 554.898804] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 554.898807] CR2: 00000000dbc23000 CR3: 00000001c7269000 CR4: 00000000001406e0 [ 554.898813] DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 [ 554.898816] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 [ 554.898818] Call Trace: [ 554.898828] unregister_shrinker+0x79/0x300 [ 554.898837] ? perf_trace_mm_vmscan_writepage+0x750/0x750 [ 554.898844] ? down_write+0x87/0x120 [ 554.898851] ? deactivate_super+0x139/0x1b0 [ 554.898857] ? down_read+0x150/0x150 [ 554.898864] ? check_same_owner+0x320/0x320 [ 554.898875] deactivate_locked_super+0x64/0xd0 [ 554.898883] deactivate_super+0x141/0x1b0 ---------- Since allowing register_shrinker() callers to call unregister_shrinker() when register_shrinker() failed can simplify error recovery path, this patch makes unregister_shrinker() no-op when register_shrinker() failed. Also, reset shrinker->nr_deferred in case unregister_shrinker() was by error called twice. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Aliaksei Karaliou <akaraliou.dev@gmail.com> Reported-by:
-
Johannes Berg authored
commit 59b179b4 upstream. syzbot reported a warning from rfkill_alloc(), and after a while I think that the reason is that it was doing fault injection and the dev_set_name() failed, leaving the name NULL, and we didn't check the return value and got to rfkill_alloc() with a NULL name. Since we really don't want a NULL name, we ought to check the return value. Fixes: fb28ad35 ("net: struct device - replace bus_id with dev_name(), dev_set_name()") Reported-by: syzbot+1ddfb3357e1d7bb5b5d3@syzkaller.appspotmail.com Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Paolo Abeni authored
commit 607f725f upstream. This also fix a potential race into the existing tunnel code, which could lead to the wrong dst to be permanenty cached: CPU1: CPU2: <xmit on ip6_tunnel> <cache lookup fails> dst = ip6_route_output(...) <tunnel params are changed via nl> dst_cache_reset() // no effect, // the cache is empty dst_cache_set() // the wrong dst // is permanenty stored // into the cache With the new dst implementation the above race is not possible since the first cache lookup after dst_cache_reset will fail due to the timestamp check Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
Manoj Boopathi Raj <manojboopathi@google.com> Signed-off-by:
-
Paolo Abeni authored
commit 911362c7 upstream. This patch add a generic, lockless dst cache implementation. The need for lock is avoided updating the dst cache fields only in per cpu scope, and requiring that the cache manipulation functions are invoked with the local bh disabled. The refresh_ts and reset_ts fields are used to ensure the cache consistency in case of cuncurrent cache update (dst_cache_set*) and reset operation (dst_cache_reset). Consider the following scenario: CPU1: CPU2: <cache lookup with emtpy cache: it fails> <get dst via uncached route lookup> <related configuration changes> dst_cache_reset() dst_cache_set() The dst entry set passed to dst_cache_set() should not be used for later dst cache lookup, because it's obtained using old configuration values. Since the refresh_ts is updated only on dst_cache lookup, the cached value in the above scenario will be discarded on the next lookup. Signed-off-by:
-
- 22 Feb, 2018 8 commits
-
-
Greg Kroah-Hartman authored
-
Arnd Bergmann authored
commit 16c3ada8 upstream. With CONFIG_KASAN, we get an overly long stack frame due to inlining the register access functions: drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7': drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] This is caused by a gcc bug that has now been fixed in gcc-8. To work around the problem, we can pass the register data through a local variable that older gcc versions can optimize out as well. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Arnd Bergmann authored
commit 5c103719 upstream. The ohci-hcd node has an interrupt number but no interrupt-parent, leading to a warning with current dtc versions: arch/arm/boot/dts/s5pv210-aquila.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-goni.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-smdkc110.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-smdkv210.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 arch/arm/boot/dts/s5pv210-torbreck.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000 As seen from the related exynos dts files, the ohci and ehci controllers always share one interrupt number, and the number is the same here as well, so setting the same interrupt-parent is the reasonable solution here. Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 33436478 upstream. Without this tag, we get a build warning: WARNING: modpost: missing MODULE_LICENSE() in arch/arm/mach-pxa/tosa-bt.o For completeness, I'm also adding author and description fields. Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Linus Torvalds authored
commit c0eb027e upstream. Normal pathname lookup doesn't allow empty pathnames, but using AT_EMPTY_PATH (with name_to_handle_at() or fstatat(), for example) you can trigger an empty pathname lookup. And not only is the RCU lookup in that case entirely unnecessary (because we'll obviously immediately finalize the end result), it is actively wrong. Why? An empth path is a special case that will return the original 'dirfd' dentry - and that dentry may not actually be RCU-free'd, resulting in a potential use-after-free if we were to initialize the path lazily under the RCU read lock and depend on complete_walk() finalizing the dentry. Found by syzkaller and KASAN. Reported-by:
Vegard Nossum <vegard.nossum@gmail.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Biggers <ebiggers3@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
I ran into a 4.9 build warning in randconfig testing, starting with the KAISER patches: arch/x86/kernel/ldt.c: In function 'alloc_ldt_struct': arch/x86/include/asm/pgtable_types.h:208:24: error: large integer implicitly truncated to unsigned type [-Werror=overflow] #define __PAGE_KERNEL (__PAGE_KERNEL_EXEC | _PAGE_NX) ^ arch/x86/kernel/ldt.c:81:6: note: in expansion of macro '__PAGE_KERNEL' __PAGE_KERNEL); ^~~~~~~~~~~~~ I originally ran into this last year when the patches were part of linux-next, and tried to work around it by using the proper 'pteval_t' types consistently, but that caused additional problems. This takes a much simpler approach, and makes the argument type of the dummy helper always 64-bit, which is wide enough for any page table layout and won't hurt since this call is just an empty stub anyway. Fixes: 8f0baadf ("kaiser: merged update") Signed-off-by:Kees Cook <keescook@chromium.org> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
NeilBrown authored
commit 8dd601fa upstream. dec_pending() is given an error status (possibly 0) to be recorded against a bio. It can be called several times on the one 'struct dm_io', and it is careful to only assign a non-zero error to io->status. However when it then assigned io->status to bio->bi_status, it is not careful and could overwrite a genuine error status with 0. This can happen when chained bios are in use. If a bio is chained beneath the bio that this dm_io is handling, the child bio might complete and set bio->bi_status before the dm_io completes. This has been possible since chained bios were introduced in 3.14, and has become a lot easier to trigger with commit 18a25da8 ("dm: ensure bio submission follows a depth-first tree walk") as that commit caused dm to start using chained bios itself. A particular failure mode is that if a bio spans an 'error' target and a working target, the 'error' fragment will complete instantly and set the ->bi_status, and the other fragment will normally complete a little later, and will clear ->bi_status. The fix is simply to only assign io_error to bio->bi_status when io_error is not zero. Reported-and-tested-by:
Milan Broz <gmazyland@gmail.com> Cc: stable@vger.kernel.org (v3.14+) Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 7ac8ff95 upstream. IPv6 doesn't work on the MacchiatoBIN board. It is caused by broken multicast address filter in the mvpp2 driver. The driver loads doesn't load any multicast entries if "allmulti" is not set. This condition should be reversed. The condition !netdev_mc_empty(dev) is useless (because netdev_for_each_mc_addr is nop if the list is empty). This patch also fixes a possible overflow of the multicast list - if mvpp2_prs_mac_da_accept fails, we set the allmulti flag and retry. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
